Engineering Education Commons^™

The Effects Of Engineering Summer Camps On Middle And High School Students’ Engineering Interest And Identity Formation: A Multi-Methods Study, Timothy Robinson, Adam Kirn, Jenny Amos, Indira Chatterjee

Journal of Pre-College Engineering Education Research (J-PEER)

This multi-methods study explores changes in engineering interest and identity of middle and high school students (n = 79) attending introductory-level engineering summer camps at a large western land grant university. Middle school is a critical time when student interest, identity, and subsequently career choice begin to emerge and hence it is important that at this age students are given accurate information about engineering majors in college and future career opportunities in engineering. Data were collected over a period of two years in six summer camps. Three separate populations of middle and high school students participated in the summer …

The Plastics Collection Reference Packet, Special Collections Research Center

Special Collections Research Center

This reference packet is an informational tool to support further research into the history of plastics—whether interested in companies, individuals within the plastics industry's history, historical plastics materials, essays, and more. All content featured within this packet was previously published on the former plastics.syr.edu website as part of a Syracuse University Libraries and Special Collections Research Center (SCRC) partnership established in 2007 with the Plastics Pioneers Association (PPA)—an association of plastics industry professionals interested in preserving the plastics industry's past.

Could The Inclusion Of Certain Building Information And Modelling Aspects Into The Leaving Certificate Engineering Syllabus, Aid The Transition Of Students Into Third Level Education, When Choosing A Course Within The Construction Industry, Joseph Boyle, Deborah M. Brennan

Capstone Reports

The paper investigates the effects of implementing several Building Information and Modelling (BIM) aspects into the Leaving Certificate Engineering Syllabus and examines the impact this has on students choosing third level Architectural Engineering and Construction (AEC) industry courses with the desire of improving the shortage in the sector. The method and content of the study was based on academic research on second level education in other European countries through the lens of a Literature Review. A sixteen-week pilot program was trialed with over one hundred students at Senior Cycle. The outcomes of the study were critically evaluated through stakeholder interviews …

Bbt Acoustic Alternative Top Bracing Cadd Data Set-Norev-2022jun28, Bill Hemphill

STEM Guitar Project’s BBT Acoustic Kit

This electronic document file set consists of an overview presentation (PDF-formatted) file and companion video (MP4) and CADD files (DWG & DXF) for laser cutting the ETSU-developed alternate top bracing designs and marking templates for the STEM Guitar Project’s BBT (OM-sized) standard acoustic guitar kit. The three (3) alternative BBT top bracing designs in this release are
(a) a one-piece base for the standard kit's (Martin-style) bracing,
(b) 277 Ladder-style bracing, and
(c) an X-braced fan-style bracing similar to traditional European or so-called 'classical' acoustic guitars.

The CADD data set for each of the three (3) top bracing designs includes …

Bbt Side Mold Assy, Bill Hemphill

STEM Guitar Project’s BBT Acoustic Kit

This electronic document file set covers the design and fabrication information of the ETSU Guitar Building Project’s BBT (OM-sized) Side Mold Assy for use with the STEM Guitar Project’s standard acoustic guitar kit. The extended 'as built' data set contains an overview file and companion video, the 'parent' CADD drawing, CADD data for laser etching and cutting a drill &/or layout template, CADD drawings in AutoCAD .DWG and .DXF R12 formats of the centerline tool paths for creating the mold assembly pieces on an AXYZ CNC router, and support documentation for CAM applications including router bit specifications, feeds, speed, multi-pass …

Augmented Reality Integrated Welder Training For Mechanical Engineering Technology, Aditya Akundi, Hamid Eisazadeh, Mona Torabizadeh

Engineering Technology Faculty Publications

The shortage of welders is well documented and projected to become more severe for various industries such as shipbuilding in coming years. It is mainly because welding training is a critical and often costly endeavor. This study examines the training potential using augmented reality technology as a critical part of welder training for mechanical engineering technology students. This study assessed the performance of two groups of MET students trained with two different methods. One group received training with the traditional method in three sessions. The second group acquired training initially with an augmented reality welding system for three sessions. Then, …

Development Of An Undergraduate Welding Laboratory For Research And Education, Hamid Eisazadeh, Alok K. Verma

Engineering Technology Faculty Publications

The shortage of welders in Hampton Roads area, where many shipyards are located, is becoming severe for shipbuilding in coming years. Many welding engineers graduated from universities located out of state, tend to go back to companies near their home, after receiving couple years of welding experience at Hampton Roads shipyards. Therefore, it is critical to train local welders. In order to address the welding workforce needs of Hampton Roads, the Department of Engineering Technology at Old Dominion University has recently launched an initiative for developing a laboratory for welding processes (LWP) for supporting educational and research activities in its …

A Brief Bibliometric Survey On Circularly Polarized Antennas For Mobile Communication, Aniket Gunjal, Abhaya Pal Singh

Library Philosophy and Practice (e-journal)

This paper presents a database review on “Circularly Polarized Antennas for Mobile Communication” as it is the emerging technique used by mobile service provider because of having benefits over other types of antennas available.The polarization purity is now the major issue. In some cases due to cross polarization issue the antenna signal is cancelled at receiver side.So, it is necessary to have circularly polarized antenna to avoid this polarization issue because of change in phase of signal. The change in phase of signal is due to striking of wave on the obstacles and it slightly tilted from its direction causes …

Integrating Professional Skills And Leadership Into An Undergraduate Engineering Program, Harold Ackler, Heidi Reeder, Abbey Louie

Materials Science and Engineering Faculty Publications and Presentations

Research and practical experience indicate that leadership and “people skills” play an important role in the success of organizations and in the careers of employees across many industries, including engineering. The Micron School of Materials Science and Engineering at Boise State University identified a need to expand available opportunities for its students to develop these critical “soft” skills. The approach taken sought to imitate how such training is conducted in the workplace, integrating it within a context of extended team-based projects. In partnership with the College of Innovation + Design’s Leadership Certificate Program, a series of sequential modules were developed …

Concrete Beam Design: Pouring The Foundation To Engineering In T&E Classrooms, Andrew J. Hughes, Chris Merrill

Educational Leadership & Technology Faculty Publications

Ask a middle or high school student if they could design a concrete beam that weighs only 20 pounds and is 36” long but must hold 600 pounds without failing. What is the student likely to say? What if the student was told that, with some optimized decision making based on relatively straightforward mathematics, their beam could hold 2400 pounds or more? The focus of this article is not on concrete beam design, it is rather an introduction to engineering principles in beam design using a lab activity. The concepts and skills learned in this article will lead students into …

Teaching Top-Down Approaches To The Engineering Design Process, Joshua E. Katz, Joshua E. Katz

STAR Program Research Presentations

One of the main focuses of metacognition is to have students think about their learning. By bringing the engineering design process with educational psychology together, it can lead to a society that thinks more in-depth on various topics. The goal of the internship was to utilize and teach top-down educational and instructional objectives. Throughout the project, we followed a modified progression of the System Architecture Methodology to help other interns think in a top-down fashion. The purpose of this procedure is to create and induce new innovative and creative ideas for different projects. As teaching this methodology was tasked, research …

Voices Of Our Students: Using Evidence-Based Methods To Inform A Multidisciplinary Engineering Program Design, Vicki Stieha, Noah Salzman, Amy J. Moll

Materials Science and Engineering Faculty Publications and Presentations

Listening carefully to our students and integrating the variables that matter to them is a step that we can take to increase the number of women and underrepresented minority graduates in engineering. This paper shares an evaluative case study as we report findings from data gathering tools guiding our continuous improvement process. The findings illuminate students’ perceptions of their engineering design course and curriculum. We conclude by discussing the pedagogical decisions the teaching team is making as a result of listening to our students’ voices.

Project Excel: Web-Based Scanning Electron Microscopy For K-12 Education, L. Scott Chumbley, Connie P. Hargrave, Kristen P. Constant, Brian Hand, Thomas Andre, E. Ann Thompson

Constance P. Hargrave

Project ExCEL (Extended Classroom for Enhanced Learning) brings the capabilities of scanning electron microscopy (SEM) into classrooms. University and industry personnel, working together, have developed a web-based interface to allow schools to control a modern SEM. The interface allows a user control of the operating parameters of the microscope, stage movement, and chemical analysis. Such total control is not available on any other system. Since Iowa State University (ISU) pioneered the idea of remote SEM for education, researchers have learned that providing teachers access to sophisticated equipment does not ensure that it will be used. Teachers are busy, and structured …

Project Excel—Web-Based Sem For K–12 Education, L. Scott Chumbley, Kristen P. Constant, Connie P. Hargrave, Tom Andre

Constance P. Hargrave

The goal of Project ExCEL, the Extended Classroom for Enhanced Learning, is to bring the capabilities of Scanning Electron Microscopy (SEM) into elementary and secondary classrooms. We have developed an entirely web-based interface to allow schools to control a modern SEM. The web interface allows a remote user complete control of all the operating parameters of the microscope, including stage movement and x-ray chemical analysis. Such total control currently is not available on any other system. Since pioneering the idea of remote SEM use for K-12 education in the early 1990s, we have learned that merely providing schools and teachers …

Application Of Computational Tools To Spaghetti-Based Truss Bridge Design, Jin Xu, Jiliang Li, Nuri Zeytinoglu, Jinyuan Zhai

ASEE IL-IN Section Conference

Application of Computational Tools to Spaghetti-Based Truss Design

Statics and Strength of Materials are two foundational courses for Mechanical/Civil Engineering. In order to assist students in better understanding and applying concepts to a meaningful design task, SolidWorks and theoretical calculation were used for a spaghetti-bridge design contest with the constraints of given maximum weight and allowable support-material weight. As the first step of this iterative designing process, both extrude feature and structural member were introduced to model planar bridge trusses. Then SolidWorks’ Statics module was used to run FEA analysis of the structural performance in efforts to optimize the …

Impact Of Substrate And Process On The Electrical Performance Of Screen-Printed Nickel Electrodes: Fundamental Mechanism Of Ink Film Roughness, Bilge N. Altay, Jerome Jourdan, Vikram S. Turkani, Hervé Dietsch, Dinesh Maddipatla, Alexandra Pekarovicova, Paul D. Fleming, Massood Atashbar

Bilge Nazli Altay

Global Packaging Trends, Bekir Keskin, Bilge N. Altay, Merve Akyol, Guven Meral, Olgun Uyar, Paul D. Fleming

Bilge Nazli Altay

Work In Progress: Institutional Context And The Implementation Of The Redshirt In Engineering Model At Six Universities, Ann Delaney, Donna C. Llewellyn, Janet Callahan

Materials Science and Engineering Faculty Publications and Presentations

Low-income students are underrepresented in engineering and are more likely to struggle in engineering programs. Such students may be academically talented and perform well in high school, but may have relatively weak academic preparation for college compared to students who attended better-resourced schools. Four-year engineering and computer science curricula are designed for students who are calculus-ready, but many students who are eager to become engineers or computer scientists need additional time and support to succeed. The NSF-funded Redshirt in Engineering Consortium was formed in 2016 as a collaborative effort to build on the success of three existing “academic Redshirt” programs …

The Redshirt In Engineering Consortium: Progress And Early Insights, Janet Callahan, Donna C. Llewellyn, Ann E. Delaney

Materials Science and Engineering Faculty Publications and Presentations

The NSF-funded Redshirt in Engineering Consortium was formed in 2016 with the goal of enhancing the ability of academically talented but underprepared students coming from lowincome backgrounds to successfully graduate with engineering degrees. The Consortium takes its name from the practice of redshirting in college athletics, with the idea of providing an extra year and support to help promising engineering students complete a bachelor’s degree. The Consortium builds on the success of three existing “academic redshirt” programs and expands the model to three new schools. The Existing Redshirt Institutions (ERIs) help mentor and train the new Student Success Partners (SSPs), …

Encouraging A Growth Mindset In Engineering Students, Megan Frary

Materials Science and Engineering Faculty Publications and Presentations

A person’s “mindset” guides a great deal of how one approaches life -- and especially how students approach education. While someone with a fixed mindset believes that their intelligence is fixed and unchangeable, someone with a growth mindset believes that their intelligence is changeable and can grow as they learn more. Most people’s mindset lies along a spectrum with these two extremes at either end. In addition to other outcomes, the mindset that a person has determines how they interpret mistakes they make; whereas someone with a fixed mindset thinks mistakes result from their innate lack of ability, someone with …

Next Generation Protocol: Innovating A Resilient Future, Andrew Steven Rudnick, Jamie Cannady, Joe Decesaro, Juan A. Ortiz Salazar

Materials Engineering

Conventional practices do not account for product life beyond end-of-sale – these practices are not sustainable. We have developed an end-of-life protocol that includes a metric that we call the Recovery Rating. The objectives of this Next Generation Protocol, beyond supporting the United Nations’ Sustainable Development Goals, are to encourage the production of goods designed for recovery and to promote the collaboration between consumers, the public, and the private sector to recover goods at their end-of-life. The Recovery Rating that we propose evaluates and quantifies recovery potential of products. The Recovery Rating, which is normed against embodied energy from the …

Redshirt In Engineering: A Model For Improving Equity And Inclusion, Donna C. Llewellyn, Ann Delaney, Janet Callahan

Materials Science and Engineering Faculty Publications and Presentations

The NSF-funded Redshirt in Engineering Consortium was formed in 2016 with the goal of enhancing the ability of academically talented but underprepared students coming from low-income backgrounds to successfully graduate with engineering degrees. The Consortium takes its name from the practice of redshirting in college athletics, with the idea of providing an extra year and support to help promising engineering students complete a bachelor’s degree. The Consortium builds on the success of three existing “academic redshirt” programs and expands the model to three new schools. The Existing Redshirt Institutions (ERIs) help mentor and train the new Student Success Partners (SSP), …

Hawai'i Wildlife Fund V. County Of Maui, Lowell J. Chandler

Public Land & Resources Law Review

In Hawai’i Wildlife Fund v. County of Maui, the Ninth Circuit held that the plain language of the Clean Water Act provides jurisdiction over indirect discharges of pollutants from a point source into groundwater that is shown to be connected to navigable waters. The court found that studies confirmed pollutants entering the Pacific Ocean were fairly traceable to the County of Maui’s sewage disposal wells. In affirming the district court’s ruling, the Ninth Circuit held that Maui County violated the Clean Water Act by discharging pollutants into a navigable water without the required permit. The court also concluded the …

Creating A Stem Identity: Investment With Return, Janet Callahan, Patricia Pyke, Susan Shadle, R. Eric Landrum

R. Eric Landrum

Establishing a strong STEM (science, technology, engineering and mathematics) identity at Boise State University, a metropolitan campus with approximately 3,655 undergraduate STEM students and a total undergraduate enrollment of approximately 19,042 (16,136 FTE) has been an important step toward creating a climate conducive to facilitating fundamental change. Examples of such change include building collaborations among faculty within and across departments, establishing the identity of students as part of a community beyond their chosen major, improving the efficiency and effectiveness of university systems, and perhaps most importantly, developing a framework to think deliberately about ways to effect change. This paper is …

Nickel Based Printed Resistance Temperature Detector On Flexible Polyimide Substrate, Vikram S. Turkani, Binu B. Narakatku, Dinesh Maddipatla, Bilge N. Altay, Paul D. Fleming, Bradley J. Bazuin, Massood Atashbar

Bilge Nazli Altay

Establishing Doctoral Programs In Electrical Engineering, Materials Science And Engineering, And Computing In An Emerging Research Institution: Lessons Learned And Best Practices, Janet Callahan, Cheryl B. Schrader, Darryl P. Butt, Timothy Anderson, Tammi Vacha-Hasse, Amy J. Moll

Materials Science and Engineering Faculty Publications and Presentations

Over the past decade, three doctoral programs have been launched at Boise State University. The first doctoral program established was in Electrical and Computer Engineering, selected because of the need for a trained workforce in the region. The other two doctoral programs, Materials Science and Engineering, and Computing, were from the start designed as interdisciplinary degree programs. That is, they were designed for the participation of not just program faculty within the division, but for the participation of program faculty with related research interests in other departments at the university. This paper presents the steps taken to launch the programs, …

Ten Years Later: Where Are They Now?, Janet Callahan, Donna C. Llewellyn, Vicki Stieha, Ann E. Delaney

Materials Science and Engineering Faculty Publications and Presentations

This paper explores the educational and career trajectories of the alumnae of an outreach activity for girls. The outreach activity was originally developed using an integrated marketing approach to attract girls into engineering programs.¹ The program, a two day, overnight experience for rising 9^th, 10^th and 11^th grade girls, focuses on showcasing engineering as an exciting, creative activity, including activities developed from that perspective. Started in 2005 and held annually since then, a total of over 500 girls have participated, with approximately 85% of them coming from Boise State University’s immediate metropolitan area. Facilitated by …

Listening And Negotiation Ii, Adjo A. Amekudzi-Kennedy, Kevin D. Hall, Trevor Scott Harding, Amy J. Moll, Janet Callahan

Materials Science and Engineering Faculty Publications and Presentations

This paper is based on a panel held in June, 2017 in Columbus, Ohio, jointly sponsored by the Women in Engineering Division and by the Minorities in Engineering Division. It is focused on negotiation, with an emphasis on providing practical strategies that are relevant in an academic setting. The panel featured academic leaders at multiple levels, including professor, chair and dean, from diverse engineering institutions, ranging from teaching-centric to heavily research-focused. Panelists discussed strategies for negotiation, with an emphasis on an approach that meets the interests of both parties to the extent possible. The panel was administrated with an opening …

Tensile Specimen Punch, John Allen

All Undergraduate Projects

This project comes from a need to have tensile specimens made for the MET 351, Metallurgy/Materials and Processes, and 426, Applied Strengths of Materials, labs. This punch is designed to be used with an arbor press to create the desired tensile specimen shape out of plastic blanks. The initial concept was suggested by Dr. Craig Johnson. The designs went through many changes, for example getting rid of the sides originally proposed to hold the specimen in place, and modifications to other parts to make them more efficient. Additional parts were also added to the design with the help and advice …

Revealing Student Misconceptions And Instructor Blind Spots With Muddiest Point Formative Feedback, Cindy Waters, Stephen J. Krause, Janet Callahan, Barry Dupen, Mary B. Vollaro, Peggie Weeks

Janet M. Callahan

Of interest to all engineering disciplines, well-designed formative feedback has the potential to enhance both instructor teaching and student learning. Delivering fundamental courses year after year, can ultimately lead faculty to use stale notes or slides from past years. This approach may save time, but does not meet the shifting needs of our students who have high expectations from their instructors. One simple method to improve teaching is to employ muddiest point reflections. Muddiest point reflections involve simply asking students to anonymously reflect on what was “muddy”, i.e. confusing, during class and to rank their level of confusion which not …