Engineering Education Commons^™

Community College Engineering Degree Partnerships With 4-Year Universities, Jeffrey Mark Stear

Electronic Theses and Dissertations

Increasing the number of STEM professionals and reducing inequities in STEM are national priorities. Community colleges are important to address these concerns because they represent a higher percentage of underrepresented minority (URM) and women students. However, students starting 4-year STEM degrees in community college have had a lower completion rate. Partnerships between community colleges and 4-year universities have the potential to improve success for community college students, but more research is necessary. The purpose of this ex post facto, quantitative, correlational study was to determine the relationships among participation in different types of partnerships between community colleges and 4-year universities, …

Strategies For Engagement Of Non-Traditional Students In Engineering-Related Courses, Kimberly T. Luthi Dr., David Harvie, Keith Wilson, Monica Surrency

Publications

Project Goals

Overview

• Goal #1: Increase students' commitment to engineering pathways.
• Goal #2: Increase academic performance and persistence in engineering.
• Goal #3: Increase persistence of Veterans in engineering pathways.

Research Questions

• How does students' participation in peer-led team learning activities in online engineering courses correlate to their a) commitment to engineering, b) engineering identity, and c) self-efficacy.
• How do students in peer-led team learning activities compare to students in non-PLTL groups in terms of a) academic performance and b) persistence in engineering pathways?

Transforming Technology & Engineering Educator Inputs Into Desired Student Outputs Through Mechanism Analysis And Synthesis, Andrew J. Hughes, Chris Merrill

Educational Leadership & Technology Faculty Publications

The intention of this article is to provide middle and high school Technology and Engineering Educators (T&EEs) with a more thorough understanding of an engineering approach to the teaching and learning of mechanics. During the teaching and learning of engineering content, in this case mechanics, the educator should attempt to align pedagogical content knowledge with engineering content knowledge and practices. T&EEs will also need to focus on terminology, structure, and applying theory to practical hands-on learning activities inside and outside of the classroom. T&EEs have the potential to foster middle and high school students’ mechanical knowledge and the ability to …

Scope Process: Fostering Students' Design Outcome Effectiveness, Andrew J. Hughes, Cameron D. Denson

Educational Leadership & Technology Faculty Publications

The purpose of this article is to help Technology and Engineering Educators scaffold engineering design and problem-solving experiences so that students taking technology and engineering courses will develop an improved ability to design. Technology and Engineering Education seems to increasingly focus on problem-solving, design, and engineering. Technology and Engineering Education is not the only discipline with this focus. The fact that both Science and Technology and Engineering Education are similarly focused on the teaching and learning of engineering begs the question of what separates technology and engineering educators from science educators in the teaching of engineering? Lewis (2004) cautioned that …

Mechanism Design And Analysis: Developing An Understanding Of Mechanism Motion Through Graphical Modeling, Andrew J. Hughes, Chris Merrill

Educational Leadership & Technology Faculty Publications

The intention of this article is to provide Technology and Engineering Educators with foundational knowledge of mechanism design and analysis and the ability to develop middle and high school students' mechanism knowledge during practical hands-on learning activities in the STEM classroom. Technology and Engineering Educators' implementation of mechanism design and analysis could promote students' increased depth of mechanical knowledge and ability to apply this knowledge during engineering design challenges. In this article, the authors present an introduction to four-bar mechanism design and analysis using CAD software to produce graphical representations. After designing mechanisms graphical, students should be allowed to produce …

Real-Life Conundrums In The Struggle For Institutional Transformation, Julia Mcquillan, Nestor Hernandez

Department of Sociology: Faculty Publications

Intersecting systems of inequality (i.e., gender and race/ethnicity) are remarkably resistant to change. Many universities, however, seek National Science Foundation Institutional Transformation awards to change processes, procedures, and cultures to make science, technology, engineering, and mathematics (STEM) departments more inclusive. In this article we describe a case study with observations for eight years of before (2000–2007), five during (2008–2013), and seven after (2014–2020) intensive efforts to increase women through reducing barriers and increasing access to women. Finally, we reflect on flawed assumptions built into the proposal, the slow and uneven change in the proportion of women over time, the strengths …

Contributing To Engineering Colleges Students' Development Through Out-Of-Class Involvement: A Survey Of Chinese Private Colleges' Engineering Students, Wanlu Li

Education (PhD) Dissertations

The purpose of this study was to investigate the primary characteristics of engineering college students’ involvement in out-of-class activities (OA) at one private college in China through the use of the translated and culturally adapted Chinese version of the Postsecondary Student Engagement Survey (PosSES 2.1). This study provides the statistical analyses of the survey data completed by 283 senior engineering students on their perceptions about their levels of involvement related to positive/negative outcomes students perceive and affective engagement. Data results showed all levels of involvement have a significant influence on positive outcomes. Besides, active involvement degree, hours, and types of …

A Phenomenographic Study Of Academics Teaching In Engineering Programmes In Ireland: Conceptions Of Professional Skills And Approaches To Teaching Professional Skills, Una Beagon

Doctoral

Engineers play a central role in addressing the challenges which face society. However, the influence of globalisation, disruptive technological change and socially complex problems will greatly affect the way engineers work in the future.

As a result, there have been calls to embrace transformational change in engineering education, yet the literature reveals that many reform efforts have fallen short. Industry and society will therefore continue to look to Higher Education Institutions (HEIs) to better prepare engineering graduates with the new skills needed to face the challenges of the future. Notwithstanding the critical and valued role that technical engineering subjects have …

Scaffolding Middle And High School Students’ Engineering Design Experiences: Quality Problem-Scopeing Promoting Successful Solutions, Andrew Hughes, Cameron Denson

Educational Leadership & Technology Faculty Publications

Highly proficient expert engineers begin the iterative process of design by thoroughly investigating the design problem. Engineering students are often distracted by surface details, leading to a faulty conception of the problem and inappropriate solution strategies. Adequate problem-scoping is arguably the most important step in the design process. To address this issue, the researchers developed an instructional framework to help teachers scaffold students’ cognitive and metacognitive processes during the problem-scoping phase of a design challenge. The purpose of this quasi-experimental study was to investigate the impact that scaffolded instruction related to the SCOPE process had on students’ solution success during …

Method Of Joints: Theory And Practice Of Designing, Building, And Testing Trusses, Andrew J. Hughes, Chris Merrill

Educational Leadership & Technology Faculty Publications

The authors of this article, like many of us, are proponents of engineering education but are also proponents of shop skills, craftsmanship, technological literacy, and the tacit knowledge and skills developed through applying sound theories during practical hands-on learning. The authors believe that engineering is an important aspect of our discipline, but so are the application of thinking, tool skills, measurement, geometric construction, manufacturing, instrumentation, testing and analysis, mathematical and scientific theories, and many other hands-on, minds-on skillsets that all need to maintain association with our discipline. As the authors are proponents for engineering education that is done well, they …

Concrete Beam Design: Pouring The Foundation To Engineering In T&E Classrooms, Andrew J. Hughes, Chris Merrill

Educational Leadership & Technology Faculty Publications

Ask a middle or high school student if they could design a concrete beam that weighs only 20 pounds and is 36” long but must hold 600 pounds without failing. What is the student likely to say? What if the student was told that, with some optimized decision making based on relatively straightforward mathematics, their beam could hold 2400 pounds or more? The focus of this article is not on concrete beam design, it is rather an introduction to engineering principles in beam design using a lab activity. The concepts and skills learned in this article will lead students into …

Analyzing Concrete Beam Design: Verifying Predictions In T&Ee Classrooms, Andrew J. Hughes, Chris Merrill

Educational Leadership & Technology Faculty Publications

Design is often accepted as a fundamental aspect of engineering (Dym, et al., 2005). The design process is frequently portrayed as a set of steps. However, the design process is more complex than just a set of steps in a relatively fixed process. The complex nature of design, design thinking, questioning, and decision-making is exactly what technology and engineering classrooms are well suited to address. When addressing the question—“Why is technology and engineering education (T&EE) so important?”—the authors believe T&EE’s importance relates to our discipline’s ability to solve complex problems by balancing theory and practice in engaging hands-on learning scenarios …

Opportunities In Manufacturing Of Advanced Materials For Second Career-Seeking Students, Oleksandr Kravchenko, Konstantin Cigularov, Tancy J. Vandecar-Burdin

Mechanical & Aerospace Engineering Faculty Publications

Many non-traditional students face similar challenges including lack of institutional support network, challenges to connecting with other students on campus, which may negatively affect degree persistence rates. The lack of financial support has been acknowledged nationwide as a barrier for STEM students including second-career seeking (SCS) students. The term career is defined as an occupation or course, which relates to a range of aspects of an individual’s life, learning and work and is undertaken for a significant period of a person’s life and with opportunities for progress. We target academically talented SCS students at Old Dominion University (ODU) with demonstrated …

Teaching Top-Down Approaches To The Engineering Design Process, Joshua E. Katz, Joshua E. Katz

STAR Program Research Presentations

One of the main focuses of metacognition is to have students think about their learning. By bringing the engineering design process with educational psychology together, it can lead to a society that thinks more in-depth on various topics. The goal of the internship was to utilize and teach top-down educational and instructional objectives. Throughout the project, we followed a modified progression of the System Architecture Methodology to help other interns think in a top-down fashion. The purpose of this procedure is to create and induce new innovative and creative ideas for different projects. As teaching this methodology was tasked, research …

The Legacy Project: Rodney L. Custer, Dte, Rodney L. Custer Dte, Johnny J. Moye Dte

STEMPS Faculty Publications

An interview with vice president of Dept. of Technical Education, Rodney Custer is presented. Topics discussed include interest in technology and engineering education; academic qualification; and experience as university department chair administrator and working with the Center for Math, Science, and Technology (CeMast).

How To Shape Attitudes Toward Stem Careers: The Search For The Most Impactful Extracurricular Clubs, Fethiye Ozis, Ali Osman Pektas, Mustafa Akca, Daniel’Le April Devoss

Journal of Pre-College Engineering Education Research (J-PEER)

It is well known that strong extracurricular STEM programs provide multiple arenas for students to expand on classroom curriculum, complementing STEM skills with creative thinking and open-ended problem solving. It has been shown that there is a relationship between the number of STEM clubs students participated in and their choice of STEM major (Sahin, 2013). Considering financial problems, including budget cuts, it gets really challenging for schools to provide a plethora of clubs. For this reason, it would be very beneficial for K–12 schools to know if certain clubs are more effective in changing attitudes toward STEM majors, and therefore …

Transforming Lives At Sheridan : A Tribute To Dr. Mozammel Khan, Lorraine Fraser, Mozammel Khan, Iain Mcnab, Jack Urowitz, Soumitra Nandi, Srinivas Ganapathyraju, Kam Ho, Daniel Zrymiak

Books and Websites

The original 2017 edition of this title was published in recognition of Dr. Mozammel Khan’s career in quality assurance instruction and positive impact on graduates of Sheridan College’s Quality Assurance Manfacturing Management program (PQUAS), with proceeds from the book supporting the Mozammel Khan scholarship Foundation. Khan, originally from Bangladesh, taught in Singapore before immigrating to Canada in the 1990s, where he founded the first post-secondary QA program of its kind in Ontario at Sheridan College.

Editor Lorraine Fraser collects heartfelt letters of appreciation to Khan from alumni of the PQUAS program, who share memories, successes and challenges from their time …

Developing Critical Collaboration Skills In Engineering Students: Results From An Empirical Study, Pilar Pazos, Nina Magpili, Zikai Zhou, Luis J. Rodriguez

Engineering Management & Systems Engineering Faculty Publications

In highly technical organizations, work is becoming increasingly distributed; requiring practicing engineers to master virtual collaboration skills while acquiring expertise in a range of collaboration technologies. Although there has been great emphasis on developing collaboration competencies in the engineering curriculum, empirical evidence of successful strategies for distributed team settings is scarce. As an attempt to fill this gap this study investigates the impact of a scalable intervention in developing virtual collaboration skills. The intervention, based on instructional scaffolds embedded with collaboration technologies, is aimed at supporting specific processes including planning, goal setting, clarifying goals and expectations, communication, coordination and progress …

Technology And Engineering Education Doctoral Students' Perceptions Of Their Profession, Gene Martin, John Ritz, Michael Kosloski

STEMPS Faculty Publications

The growth and vitality of both technology and engineering education professions rely on the quality of contributions of its new and emerging leaders. Many of these leaders are currently enrolled students in doctoral programs. These students will be challenged to assume leadership roles in which they are not currently engaged (Ehrenberg, Jakubson, Groen, So, & Price, 2007). Some students may choose to focus their careers in developing new curricula; some will become active in grant writing and grant procurement some will choose to serve as officers in their professional organizations; and others will contribute to the body of literature in …

Implementing Tablet Pcs In A Distance Learning Environment, Glenda Scales, Sharon Caraballo, James Groves, Rosalyn Hobson, Linda Vahala, Catherine Amelink

Electrical & Computer Engineering Faculty Publications

(First paragraph) The Commonwealth Graduate Engineering Program (CGEP) is a collaborative distance education program developed by leading Universities in the Commonwealth of Virginia. It is over 25 years old and its main goal is to deliver graduate engineering courses to qualified professionals located across the Commonwealth of Virginia. Traditionally, the courses delivered to students in this program are done through interactive video conferencing (IVC) technology and most students are required to drive to a physical location. However, an increasing number of working professionals are beginning to want more flexibility with the timing and locations of these classes. With these changes …