Electromagnetics and Photonics Commons^™

Ellipsometric Characterization Of Silicon And Carbon Junctions For Advanced Electronics, Alexander G. Boosalis

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

Ellipsometry has long been a valuable technique for the optical characterization of layered systems and thin films. While simple systems like epitaxial silicon dioxide are easily characterized, complex systems of silicon and carbon junctions have proven difficult to analyze. Traditional model dielectric functions for layered silicon homojunctions, a system with a similar structure to modern transistors, often have correlated parameters during ellipsometric data analysis. Similarly, epitaxial graphene as grown from thermal sublimation of silicon from silicon carbide or through chemical vapor deposition, tend to have model dielectric function parameters that correlate with the optical thickness of the graphene due to …

Tungsten Disulphide Based All Fiber Q-Switching Cylindrical-Vector Beam Generation, J. Lin, K. Yan, Yong Zhou, L. X. Xu, C. Gu, Qiwen Zhan

Electro-Optics and Photonics Faculty Publications

We proposed and demonstrated an all fiber passively Q-switching laser to generate cylindrical-vectorbeam, a two dimensional material,tungsten disulphide (WS2), was adopted as a saturable absorber inside the laser cavity, while a few-mode fiber Bragg grating was used as a transverse mode-selective output coupler. The repetition rate of the Q-switching output pulses can be varied from 80 kHz to 120 kHz with a shortest duration of 958 ns. Attributed to the high damage threshold and polarization insensitivity of the WS2 based saturable absorber, the radially polarized beam and azimuthally polarized beam can be easily generated in the Q-switchingfiber laser.

Skin Effect Suppression In Infrared-Laser Irradiated Planar Multi-Walled Carbon Nanotube/ Cu Conductors, Kamran Keramatnejad, Yang Gao, Yunshen Zhou, Hossein Rabiee Glogir, Mengmeng Wang, Yongfeng Lu

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

Skin effect suppression in planar multi-walled carbon nanotube (MWCNT)/Copper (Cu) conductors was realized at the 0-10 MHz frequency range through infrared laser irradiation of MWCNTs, which were coated on the surface of the Cu substrate via the electrophoretic deposition (EPD) method. The effect of laser irradiation and its power density on electrical and structural properties of the MWCNT/Cu conductors was investigated using a wavelength-tunable CO2 laser and then comparing the performance of the samples prepared at different conditions with that of pristine Cu. The irradiation at λ=9.219 μm proved to be effective in selective delivery of energy towards depths close …

Translation Of Rabindranath Tagore's 'Ode To Africa', Monish Ranjan Chatterjee

Electrical and Computer Engineering Faculty Publications

During his illustrious lifetime, Rabindranath Tagore travelled extensively around the world, spreading inspiration and gaining veneration in most destinations as the emissary of the East and of a deeply futuristic Universalist philosophy. An assessment of the intellectuals and cultural icons of the world whom Tagore encountered, interacted with, and influenced, is both astonishing and indeed still waiting to be adequately evaluated. His exchanges with Einstein, Wells, Rolland, Gide, Freud, Durant, Yeats, Rothenstein, Andrews, Noguchi, Gandhi, Radhakrishnan, Nehru, Bose and numerous others are well-documented. Tagore's literary works and public life centered on rejoicing in and celebrating everything unique and artistic in …

Industry-University Collaboration: A University Of Dayton Model, Guru Subramanyam

Electrical and Computer Engineering Faculty Publications

This paper introduces industry-university collaboration activities currently in place at the University of Dayton's School of Engineering. These collaborations are important to prepare industry-ready graduates who excel in technical, entrepreneurial, and leadership skills. One of the key curricular components is the industry-sponsored multidisciplinary projects. Industry involvement in advisory committee, strategic research partnerships, and other forms are discussed.

Spectral And Performance Analysis For The Propagation And Retrieval Of Signals From Modulated Chaos Waves Transmitted Through Modified Von Karman Turbulence, Fathi H.A. Mohamed, Monish Ranjan Chatterjee

Electrical and Computer Engineering Faculty Publications

A transfer function formalism is applied to track propagation of modulated chaos waves through modified von Karman phase turbulence; the demodulated signal is examined vis-à-vis performance relative to turbulence strength in comparison with non-chaotic propagation.

Negative Index In A Lossy Chiral Metamaterial Under First-Order Material Dispersion Using A Drude Model, Tarig A. Algadey, Monish Ranjan Chatterjee

Electrical and Computer Engineering Faculty Publications

Using the Drude model for complex conductivity,phase and group velocities, and indices are calculated under first-order dispersion in chiral metamaterials. Conditions are derived for negative index, and the results compared with parametric analyses.

Creation Of Identical Multiple Focal Spots With Prescribed Axial Distribution, Yanzhong Yu, Qiwen Zhan

Electro-Optics and Photonics Faculty Publications

We present a scheme for the construction of coaxially equidistant multiple focal spots with identical intensity profiles for each individual focus and a predetermined number and spacing. To achieve this, the radiation field from an antenna is reversed and then gathered by high numerical aperture objective lenses. Radiation patterns from three types of line sources, i.e., the electric current, magnetic current and electromagnetic current distributions, with cosine-squared taper are respectively employed to generate predominately longitudinally polarized bright spots, azimuthally polarized doughnuts, and focal spots with a perfect spherically symmetric intensity distribution. The required illuminations at the pupil plane of a …

Directional Ringlet Intensity Feature Transform For Tracking, Evan Krieger, Paheding Sidike, Theus H. Aspiras, Vijayan K. Asari

Electrical and Computer Engineering Faculty Publications

The challenges existing for current intensity-based histogram feature tracking methods in wide area motion imagery include object structural information distortions and background variations, such as different pavement or ground types. All of these challenges need to be met in order to have a robust object tracker, while attaining to be computed at an appropriate speed for real-time processing. To achieve this we propose a novel method, Directional Ringlet Intensity Feature Transform (DRIFT), that employs Kirsch kernel filtering and Gaussian ringlet feature mapping. We evaluated the DRIFT on two challenging datasets, namely Columbus Large Image Format (CLIF) and Large Area Image …

Tailoring Optical Complex Field With Spiral Blade Plasmonic Vortex Lens, Guanghao Rui, Qiwen Zhan, Yiping Cui

Electro-Optics and Photonics Faculty Publications

Optical complex fields have attracted increasing interests because of the novel effects and phenomena arising from the spatially inhomogeneous state of polarizations and optical singularities of the light beam. In this work, we propose a spiral blade plasmonic vortex lens (SBPVL) that offers unique opportunities to manipulate these novel fields. The strong interaction between the SBPVL and the optical complex fields enable the synthesis of highly tunable plasmonic vortex. Through theoretical derivations and numerical simulations we demonstrated that the characteristics of the plasmonic vortex are determined by the angular momentum (AM) of the light, and the geometrical topological charge of …

Vanadium Oxide Thin-Film Variable Resistor-Based Rf Switches, Kuanchang Pan, Weisong Wang, Eunsung Shin, Kelvin Freeman, Guru Subramanyam

Electrical and Computer Engineering Faculty Publications

Vanadium dioxide (VO2) is a unique phase change material (PCM) that possesses a metal-to-insulator transition property. Pristine VO2 has a negative temperature coefficient of resistance, and it undergoes an insulator-to-metal phase change at a transition temperature of 68°C. Such a property makes the VO2 thin-film-based variable resistor (varistor) a good candidate in reconfigurable electronics to be integrated with different RF devices such as inductors, varactors, and antennas. Series single-pole single-throw (SPST) switches with integrated VO2 thin films were designed, fabricated, and tested. The overall size of the device is 380 μm × 600 μm. The SPST switches were fabricated on …

Creation Of Carbon Nanotube Based Biosensors Through Dielectrophoretic Assembly, Nilan S. Mani, Steve Kim, Kaushik Annam, Danielle Bane, Guru Subramanyam

Electrical and Computer Engineering Faculty Publications

Due to their excellent electrical, optical, and mechanical properties, nanosized single wall carbon nanotubes (SWNTs) have attracted significant attention as a transducing element in nano-bio sensor research. Controlled assembly, device fabrication, and bio-functionalization of the SWNTs are crucial in creating the sensors. In this study, working biosensor platforms were created using dielectrophoretic assembly of single wall carbon nanotubes (SWNTs) as a bridge between two gold electrodes. SWNTs in a commercial SDS surfactant solution were dispensed in the gap between the two gold electrodes, followed by applying an ac voltage across the two electrodes. The dielectrophoresis aligns the CNTs and forms …

Automatic Registration Of Optical Aerial Imagery To A Lidar Point Cloud For Generation Of City Models, Bernard Olushola Abayowa, Alper Yilmaz, Russell C. Hardie

Electrical and Computer Engineering Faculty Publications

This paper presents a framework for automatic registration of both the optical and 3D structural information extracted from oblique aerial imagery to a Light Detection and Ranging (LiDAR) point cloud without prior knowledge of an initial alignment. The framework employs a coarse to fine strategy in the estimation of the registration parameters. First, a dense 3D point cloud and the associated relative camera parameters are extracted from the optical aerial imagery using a state-of-the-art 3D reconstruction algorithm. Next, a digital surface model (DSM) is generated from both the LiDAR and the optical imagery-derived point clouds. Coarse registration parameters are then …

Dna Based Electrolyte/Separator For Lithium Battery Application, Jitendra Kumar, Fahima Ouchen-Bouchendouka, Devin A. Smarra, Guru Subramanyam, James Grote

Electrical and Computer Engineering Faculty Publications

In this study, we demonstrated the use of DNA-CTMA (DC) in combination with PolyVinylidene Fluoride (PVDF) as a host matrix or separator for Lithium based electrolyte to form solid polymer/gel like electrolyte for potential application in Li-ion batteries.

The addition of DC provided a better thermal stability of the composite electrolyte as shown by the thermos-gravimetric analysis (TGA). The AC conductivity measurements suggest that the addition of DC to the gel electrolyte had no effect on the overall ionic conductivity of the composite. The obtained films are flexible with high mechanical stretch-ability as compared to the gel type electrolytes only.

Design Method For Wideband Circularly Polarized Slot Antennas, Adam Narbudowicz, Matthias John, Vit Sipal, Xiulong Bao, Max Ammann

Articles

A compact ultrawideband (UWB) circularly polarized (CP) slot antenna is proposed with a methodology for automated reoptimization for packaging with proprietary devices. The slot structure employs a dual-feed with an integrated compact UWB phase shifter. The design process involves an advanced optimization algorithm and demonstrates the use of spline curves for generation of CP signals. These allow easy optimization, while preserving phase coherency across a wideband. The prototyped antennahas a CP bandwidth of 54% (from 3.2 to 6.1 GHz).

Planar Dual-Mode Mimo Antenna With Enhanced Bandwidth, Adam Narbudowicz, Slawomir Koziel, Max Ammann, Dirk Heberling

Conference papers

The paper proposes a dual-port pa MIMO applications, optimized using optimization techniques. The antenna uses two (TM100 and TM200) to generate two indep patterns. To enhance the bandwidth of TM200 ground plane was realized as a meshed surfac approach provides 97 MHz of bandwidth, while profile of 1.5 mm between the patch and the g 3.5). The numerical optimization involved 12 adj parameters.

Secure Transmission And Retrieval Of Images In Conjunction With Steganography Using Chaos In Nonlinear Acousto-Optic Feedback, Monish Ranjan Chatterjee, Fares S. Almehmadi

Electrical and Computer Engineering Faculty Publications

Digital images are encrypted onto a chaotic carrier in a Bragg cell under hybrid nonlinear feedback and secure data is embedded into the system via steganography. System robustness (with and without channel noise) is analyzed vis-a-vis information security.

Towards Circularly Polarized Reconfigurable Huygens Source, Adam Narbudowicz, Max Ammann, Dirk Heberling

Conference papers

The paper investigates an array of two reconfigurable circularly-polarized antennas with omnidirectional radiation pattern. The results are based on a previously reported antenna, which offers a steerable dipolelike radiation pattern. Its capabilities allow reception of a signal from practically any direction with steering realized by rotation of the pattern around a single axis. In this paper we propose to extend this functionality by forming an array of two such antennas oriented as a Huygens source. Simulations demonstrate six distinctive radiation patterns, each illuminating a different sector of the surrounding sphere. This allows increased antenna gain and simplification of the steering …

Emergence Of Negative Index In A Lossy Chiral Metamaterial Under First-Order Material Dispersion, Monish Ranjan Chatterjee, Tarig A. Algadey

Electrical and Computer Engineering Faculty Publications

For a lossless dispersive chiral material, negative index (NIM) occurred only by use of parametric analysis (and not via practical models) to first-order. These findings are re-visited for the lossy problem and the results are compared.

A Transfer Function Based Frequency Model For Propagation Of A Chaos Wave Through Modified Von Karman Turbulence Under Various Chaos And Turbulence Conditions, Monish Ranjan Chatterjee, Fathi H.A. Mohamed

Electrical and Computer Engineering Faculty Publications

Complex phasor fields for electromagnetic wave propagation through von Karman turbulence and acousto-optic RF chaos are derived en route to the effective transfer function between chaos and narrow turbulence. Results are tested for several turbulence and chaos conditions.

Intrinsic Physical Layer Authentication Of Integrated Circuits, William E. Cobb, Michael A. Temple, Rusty O. Baldwin, Eric W. Garcia, Eric D. Lapse

AFIT Patents

A system and method of generating and comparing a fingerprint for an integrated circuit is provided. A sensor module captures electromagnetic emissions from the integrated circuit. A feature extraction module extracts discriminating features from the captured electromagnetic emissions. A classifier training module generates a plurality of authentication fingerprints of the integrated circuit from the extracted discriminating features creating a reference fingerprint template for the integrated circuit. The reference template for the integrated circuit is stored in a database. For authentication, the reference fingerprint template from the database is compared to the generated authentication fingerprint.

Insole Antenna For On-Body Telemetry, Domenico Gaetano, Patrick Mcevoy, Max Ammann, Matthias John, Colm Brannigan, Louise Keating, Frances Horgan

Articles

A 433 MHz antenna is proposed for integration with the insole of footwear for a body area network. The folded dipole design with an asymmetric groundplane radiates from its edges and considers the close proximity of the human foot and ground surfaces. It functions for different ground conductivity conditions and an on-body communication link with an Inverted F Antenna in the upper body area was evaluated on a static and dynamic human subject. The antenna solution was compliant with Specific Absorption Rate requirements, remains matched and links with upper-body nodes regardless of the body posture and node location.

Segmentation Of Pulmonary Nodules In Computed Tomography Using A Regression Neural Network Approach And Its Application To The Lung Image Database Consortium And Image Database Resource Initiative Dataset, Temesguen Messay, Russell C. Hardie, Timothy R. Tuinstra

Electrical and Computer Engineering Faculty Publications

We present new pulmonary nodule segmentation algorithms for computed tomography (CT). These include a fully-automated (FA) system, a semi-automated (SA) system, and a hybrid system. Like most traditional systems, the new FA system requires only a single user-supplied cue point. On the other hand, the SA system represents a new algorithm class requiring 8 user-supplied control points. This does increase the burden on the user, but we show that the resulting system is highly robust and can handle a variety of challenging cases. The proposed hybrid system starts with the FA system. If improved segmentation results are needed, the SA …

Segmentation Of Pulmonary Nodules In Computed Tomography Using A Regression Neural Network Approach And Its Application To The Lung Image Database Consortium And Image Database Resource Initiative Dataset, Temesguen Messay, Russell C. Hardie, Timothy R. Tuinstra

Electrical and Computer Engineering Faculty Publications

We present new pulmonary nodule segmentation algorithms for computed tomography (CT). These include a fully-automated (FA) system, a semi-automated (SA) system, and a hybrid system. Like most traditional systems, the new FA system requires only a single user-supplied cue point. On the other hand, the SA system represents a new algorithm class requiring 8 user-supplied control points. This does increase the burden on the user, but we show that the resulting system is highly robust and can handle a variety of challenging cases. The proposed hybrid system starts with the FA system.

If improved segmentation results are needed, the SA …

Circularly Polarized Solar Antenna For Airborne Communication Nodes, Oisin O’Conchubhair, Adam Narbudowicz, Patrick Mcevoy, Max Ammann

Articles

A circularly polarized solar cell antenna consisting of four sequentially rotated printed inverted-F antennas is proposed. Four multicrystalline silicon solar cells act as the ground plane and the antenna is suitable for low power airborne communication nodes and wireless sensor networks. The antenna design was developed to allow 100% insolation of the cells when directly facing a light source. The low-profile antenna minimises shadowing of the solar cell for oblique angle insolation.

Interstitial Silicon Ions In Rutile Tio2 Crystals, Eric M. Golden, Nancy C. Giles, Shan Yang, Larry E. Halliburton

Faculty Publications

Electron paramagnetic resonance (EPR) is used to identify a new and unique photoactive silicon-related point defect in single crystals of rutile TiO₂. The importance of this defect lies in its assignment to interstitial silicon ions and the unexpected establishment of silicon impurities as a major hole trap in TiO₂. Principal g values of this new S=1/2 center are 1.9159, 1.9377, and 1.9668 with principal axes along the [¯110],[001], and [110] directions, respectively. Hyperfine structure in the EPR spectrum shows the unpaired spin interacting equally with two Ti nuclei and unequally with two Si nuclei. These silicon …

On Pattern Reconfigurable Antennas Steered By Modulation Scheme, Adam Narbudowicz, Max Ammann, Dirk Heberling

Conference papers

The paper demonstrates how a modulation constellation can be used to steer the radiation pattern of a reconfigurable omnidirectional circularly polarized antenna. The proposed approach offers the benefit of digital beamforming while using a single antenna: the steering can be executed by low frequency electronics and independently for each frequency channel. In the proposed study, the antenna is excited by a signal generated by two I/Q modulators. By appropriately changing the I and Q components, a phase shift is generated which effectively steers the radiation pattern. The results were achieved using cosimulation between CST Microwave Studio and CST Design Studio.

Tailoring Optical Complex Fields With Nano-Metallic Surfaces, Guanghao Rui, Qiwen Zhan

Electro-Optics and Photonics Faculty Publications

Recently there is an increasing interest in complex optical fields with spatially inhomogeneous state of polarizations and optical singularities. Novel effects and phenomena have been predicted and observed for light beams with these unconventional states. Nanostructured metallic thin film offers unique opportunities to generate, manipulate and detect these novel fields. Strong interactions between nano-metallic surfaces and complex optical fields enable the development of highly compact and versatile functional devices and systems. In this review, we first briefly summarize the recent developments in complex optical fields. Various nano-metallic surface designs that can produce and manipulate complex optical fields with tailored characteristics …

Uniquely Identifiable Tamper-Evident Device Using Coupling Between Subwavelength Gratings, Ange Marie P. Fievre

FIU Electronic Theses and Dissertations

Reliability and sensitive information protection are critical aspects of integrated circuits. A novel technique using near-field evanescent wave coupling from two subwavelength gratings (SWGs), with the input laser source delivered through an optical fiber is presented for tamper evidence of electronic components. The first grating of the pair of coupled subwavelength gratings (CSWGs) was milled directly on the output facet of the silica fiber using focused ion beam (FIB) etching. The second grating was patterned using e-beam lithography and etched into a glass substrate using reactive ion etching (RIE). The slightest intrusion attempt would separate the CSWGs and eliminate near-field …

Remote Sensing Of Hidden Objects, Mark G. Hoelscher, Michael A. Marciniak

AFIT Patents

An apparatus and method are provided for creating an indirect image of an object. The apparatus includes a light source and an imaging system. Light emitted from the light source is reflected by a first non-specular surface toward the object. Light reflected by the object is further reflected by a second non-specular surface toward the imaging system. The imaging system is configured to create the indirect image from the reflected light.