Electromagnetics and Photonics Commons^™

Vanadium Oxide Thin-Film Variable Resistor-Based Rf Switches, Kuanchang Pan, Weisong Wang, Eunsung Shin, Kelvin Freeman, Guru Subramanyam

Guru Subramanyam

Vanadium dioxide (VO2) is a unique phase change material (PCM) that possesses a metal-to-insulator transition property. Pristine VO2 has a negative temperature coefficient of resistance, and it undergoes an insulator-to-metal phase change at a transition temperature of 68°C. Such a property makes the VO2 thin-film-based variable resistor (varistor) a good candidate in reconfigurable electronics to be integrated with different RF devices such as inductors, varactors, and antennas. Series single-pole single-throw (SPST) switches with integrated VO2 thin films were designed, fabricated, and tested. The overall size of the device is 380 μm × 600 μm. The SPST switches were fabricated on …

A High Performance Ceramic-Polymer Separator For Lithium Batteries, Jitendra Kumar, Padmakar Kichambare, Amarendra K. Rai, Rabi Bhattacharya, Stanley J. Rodrigues, Guru Subramanyam

Guru Subramanyam

A three-layered (ceramic-polymer-ceramic) hybrid separator was prepared by coating ceramic electrolyte [lithium aluminum germanium phosphate (LAGP)] over both sides of polyethylene (PE) polymer membrane using electron beam physical vapor deposition (EB-PVD) technique. Ionic conductivities of membranes were evaluated after soaking PE and LAGP/PE/LAGP membranes in a 1 Molar (1M) lithium hexafluroarsenate (LiAsF6) electrolyte in ethylene carbonate (EC), dimethyl carbonate (DMC) and ethylmethyl carbonate (EMC) in volume ratio (1:1:1). Scanning electron microscopy (SEM) and X-ray diffraction (XRD) techniques were employed to evaluate morphology and structure of the separators before and after cycling performance tests to better understand structure-property correlation. As compared …

Industry-University Collaboration: A University Of Dayton Model, Guru Subramanyam

Guru Subramanyam

This paper introduces industry-university collaboration activities currently in place at the University of Dayton's School of Engineering. These collaborations are important to prepare industry-ready graduates who excel in technical, entrepreneurial, and leadership skills. One of the key curricular components is the industry-sponsored multidisciplinary projects. Industry involvement in advisory committee, strategic research partnerships, and other forms are discussed.

Scaled Synthetic Aperture Radar System Development, Ryan K. Green

Master's Theses

Synthetic Aperture Radar (SAR) systems generate two dimensional images of a target area using RF energy as opposed to light waves used by cameras. When cloud cover or other optical obstructions prevent camera imaging over a target area, SAR can be substituted to generate high resolution images. Linear frequency modulated signals are transmitted and received while a moving imaging platform traverses a target area to develop high resolution images through modern digital signal processing (DSP) techniques. The motivation for this joint thesis project is to design and construct a scaled SAR system to support Cal Poly radar projects. Objectives include …

Sensitivity Improvement Of A 1-Μm Ladar System Incorporating An Active Optical Fiber Preamplifier, Michael S. Salisbury, Paul F. Mcmanamon, Bradley D. Duncan

Bradley D. Duncan

In an effort to increase the SNR of a continuous wave, 1-μm all solid state ladar system, a rare-earth-doped optical fiber amplifier is investigated as a preamplifier for ladar return signals. The experimental system is detailed and a theoretical analysis of the fiber amplifier's effect on both heterodyne and direct detection schemes is provided. Beginning with the optical powers incident on the detector, the signal and noises are analyzed, through the detector electronics, to predict the SNR. The SNR is then plotted as a function of the return signal power, and a SNR threshold is defined to determine a minimum …

Adaptive Beam Director For A Tiled Fiber Array, Mikhail Vorontsov, Jim F. Riker, Ernst Polnau, Svetlana Lachinova, Venkata S. Rao Gudimetla

Mikhail Vorontsov

We present the concept development of a novel atmospheric compensation system based on adaptive tiled fiber array architecture operating with target-in-the-loop scenarios for directed beam applications. The adaptive tiled fiber array system is integrated with adaptive beam director (ABD). Wavefront control and sensing functions are performed directly on the beam director telescope primary mirror. The beam control of the adaptive tiled fiber array aims to compensate atmospheric turbulence-induced dynamic phase aberrations and results in a corresponding brightness increase on the illuminated extended object. The system is specifically designed for tiled fiber system architectures operating in strong intensity scintillation and speckle-modulation …

Characterization Of Atmospheric Turbulence Effects Over 149 Km Propagation Path Using Multi-Wavelength Laser Beacons, Mikhail Vorontsov, Gary W. Carhart, Venkata S. Rao Gudimetla, Thomas Weyrauch, Eric Stevenson, Svetlana Lachinova, Leonid A. Beresnev, Jony Jiang Liu, Karl Rehder, Jim F. Riker

Mikhail Vorontsov

We describe preliminary results of a set of laser beam propagation experiments performed over a long (149 km) near-horizontal propagation path between Mauna Loa (Hawaii Island) and Haleakala (Island of Maui) mountains in February 2010. The distinctive feature of the experimental campaign referred to here as the Coherent Multi-Beam Atmospheric Transceiver (COMBAT) experiments is that the measurements of the atmospheric-turbulence induced laser beam intensity scintillations at the receiver telescope aperture were obtained simultaneously using three laser sources (laser beacons) with different wavelengths (λ1 = 0.53 μm, λ2 = 1.06 μm, and λ3 = 1.55 μm). The presented experimental results on …

Comparison Of Turbulence-Induced Scintillations For Multi-Wavelength Laser Beacons Over Tactical (7 Km) And Long (149 Km) Atmospheric Propagation Paths, Mikhail Vorontsov, Venkata S. Rao Gudimetla, Gary W. Carhart, Thomas Weyrauch, Svetlana Lachinova, Ernst Polnau, Joseph Rierson, Leonid A. Beresnev, Jony Jiang Liu, Jim F. Riker

Mikhail Vorontsov

We report results of the experimental analysis of atmospheric effects on laser beam propagation over two distinctive propagation paths: a long-range (149 km) propagation path between Mauna Loa (Island of Hawaii) and Haleakala (Island of Maui) mountains, and a tactical-range (7 km) propagation path between the roof of the Dayton Veterans Administration Medical Center (VAMC) and the Intelligent Optics Laboratory (IOL/UD) located on the 5th floor of the University of Dayton College Park Center building. Both testbeds include three laser beacons operating at wavelengths 532 nm, 1064 nm, and 1550 nm and a set of identical optical receiver systems with …

Atmospheric Turbulence Compensation Of Point Source Images Using Asynchronous Stochastic Parallel Gradient Descent Technique On Amos 3.6 M Telescope, Mikhail Vorontsov, Jim F. Riker, Gary W. Carhart, Venkata S. Rao Gudimetla, Leonid A. Beresnev, Thomas Weyrauch

Mikhail Vorontsov

The Stochastic Parallel Gradient Descent Technique-based Adaptive Optics (SPGD-AO) system described in this presentation does not use a conventional wavefront sensor. It uses a metric signal collected by a single pixel detector placed behind a pinhole in the image plane to drive three deformable mirrors (DMs). The system is designed to compensate the image for turbulence effects. The theory behind this method is described in detail in [1]. However this technique, while widely simulated and tested in the laboratory, was not yet verified in astronomical field site experiments. During the month of May 2007, a series of experiments with SPGD-AO …

Pocket Deformable Mirror For Adaptive Optics Applications, Leonid A. Beresnev, Mikhail Vorontsov, Peter Wangsness

Mikhail Vorontsov

Adaptive/active optical elements are designed to improve optical system performance in the presence of phase aberrations. For atmospheric optics and astronomical applications, an ideal deformable mirror should have sufficient frequency bandwidth for compensation of fast changing wave front aberrations induced by either atmospheric turbulences or by turbulent air flows surrounding a flying object (air optical effects). In many applications, such as atmospheric target tracking, remote sensing from flying aircraft, boundary layer imaging, laser communication and laser beam projection over near horizontal propagation paths the phase aberration frequency bandwidth can exceed several kHz. These fast-changing aberrations are currently compensated using relatively …

Adaptive Optics Performance Over Long Horizontal Paths: Aperture Effects In Multi-Conjugate Adaptive Optical Systems, Miao Yu, Mikhail Vorontsov, Svetlana Lachinova, Jim F. Riker, Venkata S. Rao Gudimetla

Mikhail Vorontsov

We analyze various scenarios of the aperture effects in adaptive optical receiver-type systems when inhomogeneities of the wave propagation medium are distributed over long horizontal propagation path, or localized in a few thin layers remotely located from the receiver telescope pupil. Phase aberration compensation is performed using closed-loop control architectures based on phase conjugation and decoupled stochastic parallel gradient descent (DSPGD) control algorithms. Both receiver system aperture diffraction effects and the impact of wave-front corrector position on phase aberration compensation efficiency are analyzed for adaptive systems with single or multiple wave-front correctors.

Translation Of Rabindranath Tagore's 'Ode To Africa', Monish Ranjan Chatterjee

Electrical and Computer Engineering Faculty Publications

During his illustrious lifetime, Rabindranath Tagore travelled extensively around the world, spreading inspiration and gaining veneration in most destinations as the emissary of the East and of a deeply futuristic Universalist philosophy. An assessment of the intellectuals and cultural icons of the world whom Tagore encountered, interacted with, and influenced, is both astonishing and indeed still waiting to be adequately evaluated. His exchanges with Einstein, Wells, Rolland, Gide, Freud, Durant, Yeats, Rothenstein, Andrews, Noguchi, Gandhi, Radhakrishnan, Nehru, Bose and numerous others are well-documented. Tagore's literary works and public life centered on rejoicing in and celebrating everything unique and artistic in …

Industry-University Collaboration: A University Of Dayton Model, Guru Subramanyam

Electrical and Computer Engineering Faculty Publications

This paper introduces industry-university collaboration activities currently in place at the University of Dayton's School of Engineering. These collaborations are important to prepare industry-ready graduates who excel in technical, entrepreneurial, and leadership skills. One of the key curricular components is the industry-sponsored multidisciplinary projects. Industry involvement in advisory committee, strategic research partnerships, and other forms are discussed.

Spectral And Performance Analysis For The Propagation And Retrieval Of Signals From Modulated Chaos Waves Transmitted Through Modified Von Karman Turbulence, Fathi H.A. Mohamed, Monish Ranjan Chatterjee

Electrical and Computer Engineering Faculty Publications

A transfer function formalism is applied to track propagation of modulated chaos waves through modified von Karman phase turbulence; the demodulated signal is examined vis-à-vis performance relative to turbulence strength in comparison with non-chaotic propagation.

Negative Index In A Lossy Chiral Metamaterial Under First-Order Material Dispersion Using A Drude Model, Tarig A. Algadey, Monish Ranjan Chatterjee

Electrical and Computer Engineering Faculty Publications

Using the Drude model for complex conductivity,phase and group velocities, and indices are calculated under first-order dispersion in chiral metamaterials. Conditions are derived for negative index, and the results compared with parametric analyses.

Monoclinic Optical Constants, Birefringence, And Dichroism Of Slanted Titanium Nanocolumns Determined By Generalized Ellipsometry, Daniel Schmidt, Benjamin Booso, Tino Hofmann, Eva Schubert, Andrew Sarangan, Mathias Schubert

Andrew Sarangan

Generalized spectroscopic ellipsometry determines the principal monoclinic optical constants of thin films consisting of slanted titanium nanocolumns deposited by glancing angle deposition under 85° incidence and tilted from the surface normal by 47°. Form birefringence measured for wavelengths from 500 to 1000 nm renders the Ti nanocolumns monoclinic absorbing crystals with c-axis along the nanocolumns, b-axis parallel to the film interface, and 67.5° monoclinic angle between the aand c-axes. The columnar thin film reveals anomalous optical dispersion, extreme birefringence, strong dichroism, and differs completely from bulk titanium. Characteristic bulk interband transitions are absent in the spectral range investigated.

Charging Level And Deposition Of Droplets In Electrostatic Painting, Husam Osman

Electronic Thesis and Dissertation Repository

The process of electrostatic painting has become a very important method of coating in a wide range of industrial applications including those used in the automobile industry. The general principle of spray coating is to deposit liquid droplets or solid powder particles on coated targets having various shapes. The electrostatic coating process consists of three main stages: droplet formation and charging, transportation and deposition. The complication of this process is caused by various factors, such as the physical properties of the material to be used, the appropriate electrical and mechanical conditions and the target surface to be coated, which affects …

Vanadium Oxide Thin-Film Variable Resistor-Based Rf Switches, Kuanchang Pan, Weisong Wang, Eunsung Shin, Kelvin Freeman, Guru Subramanyam

Electrical and Computer Engineering Faculty Publications

Vanadium dioxide (VO2) is a unique phase change material (PCM) that possesses a metal-to-insulator transition property. Pristine VO2 has a negative temperature coefficient of resistance, and it undergoes an insulator-to-metal phase change at a transition temperature of 68°C. Such a property makes the VO2 thin-film-based variable resistor (varistor) a good candidate in reconfigurable electronics to be integrated with different RF devices such as inductors, varactors, and antennas. Series single-pole single-throw (SPST) switches with integrated VO2 thin films were designed, fabricated, and tested. The overall size of the device is 380 μm × 600 μm. The SPST switches were fabricated on …

Creation Of Carbon Nanotube Based Biosensors Through Dielectrophoretic Assembly, Nilan S. Mani, Steve Kim, Kaushik Annam, Danielle Bane, Guru Subramanyam

Electrical and Computer Engineering Faculty Publications

Due to their excellent electrical, optical, and mechanical properties, nanosized single wall carbon nanotubes (SWNTs) have attracted significant attention as a transducing element in nano-bio sensor research. Controlled assembly, device fabrication, and bio-functionalization of the SWNTs are crucial in creating the sensors. In this study, working biosensor platforms were created using dielectrophoretic assembly of single wall carbon nanotubes (SWNTs) as a bridge between two gold electrodes. SWNTs in a commercial SDS surfactant solution were dispensed in the gap between the two gold electrodes, followed by applying an ac voltage across the two electrodes. The dielectrophoresis aligns the CNTs and forms …

Automatic Registration Of Optical Aerial Imagery To A Lidar Point Cloud For Generation Of City Models, Bernard Olushola Abayowa, Alper Yilmaz, Russell C. Hardie

Electrical and Computer Engineering Faculty Publications

This paper presents a framework for automatic registration of both the optical and 3D structural information extracted from oblique aerial imagery to a Light Detection and Ranging (LiDAR) point cloud without prior knowledge of an initial alignment. The framework employs a coarse to fine strategy in the estimation of the registration parameters. First, a dense 3D point cloud and the associated relative camera parameters are extracted from the optical aerial imagery using a state-of-the-art 3D reconstruction algorithm. Next, a digital surface model (DSM) is generated from both the LiDAR and the optical imagery-derived point clouds. Coarse registration parameters are then …

Dna Based Electrolyte/Separator For Lithium Battery Application, Jitendra Kumar, Fahima Ouchen-Bouchendouka, Devin A. Smarra, Guru Subramanyam, James Grote

Electrical and Computer Engineering Faculty Publications

In this study, we demonstrated the use of DNA-CTMA (DC) in combination with PolyVinylidene Fluoride (PVDF) as a host matrix or separator for Lithium based electrolyte to form solid polymer/gel like electrolyte for potential application in Li-ion batteries.

The addition of DC provided a better thermal stability of the composite electrolyte as shown by the thermos-gravimetric analysis (TGA). The AC conductivity measurements suggest that the addition of DC to the gel electrolyte had no effect on the overall ionic conductivity of the composite. The obtained films are flexible with high mechanical stretch-ability as compared to the gel type electrolytes only.

Design Method For Wideband Circularly Polarized Slot Antennas, Adam Narbudowicz, Matthias John, Vit Sipal, Xiulong Bao, Max Ammann

Articles

A compact ultrawideband (UWB) circularly polarized (CP) slot antenna is proposed with a methodology for automated reoptimization for packaging with proprietary devices. The slot structure employs a dual-feed with an integrated compact UWB phase shifter. The design process involves an advanced optimization algorithm and demonstrates the use of spline curves for generation of CP signals. These allow easy optimization, while preserving phase coherency across a wideband. The prototyped antennahas a CP bandwidth of 54% (from 3.2 to 6.1 GHz).

Secure Transmission And Retrieval Of Images In Conjunction With Steganography Using Chaos In Nonlinear Acousto-Optic Feedback, Monish Ranjan Chatterjee, Fares S. Almehmadi

Electrical and Computer Engineering Faculty Publications

Digital images are encrypted onto a chaotic carrier in a Bragg cell under hybrid nonlinear feedback and secure data is embedded into the system via steganography. System robustness (with and without channel noise) is analyzed vis-a-vis information security.

Veloelectric: Creating A Device That Harvests Energy From Bicycles, Austin Hall, Daniel Stohr, Tj Fox

Mechanical Engineering

Long distance mountain bikers, bike-packers, and many bikers in developing countries rely on electrical devices for safety and communication. These specific groups of people operate in areas with little to no electricity, and often times have no power to sustain their devices. The purpose of this Cal Poly senior project, VeloElectric, was to design, build, and test a kinetic energy harvester for bicycles that can be used to charge common mobile devices via USB. This senior project team created a device that attaches directly to a bicycle and uses vibrations to generate energy, which in turn powers a variety of …

Emergence Of Negative Index In A Lossy Chiral Metamaterial Under First-Order Material Dispersion, Monish Ranjan Chatterjee, Tarig A. Algadey

Electrical and Computer Engineering Faculty Publications

For a lossless dispersive chiral material, negative index (NIM) occurred only by use of parametric analysis (and not via practical models) to first-order. These findings are re-visited for the lossy problem and the results are compared.

A Transfer Function Based Frequency Model For Propagation Of A Chaos Wave Through Modified Von Karman Turbulence Under Various Chaos And Turbulence Conditions, Monish Ranjan Chatterjee, Fathi H.A. Mohamed

Electrical and Computer Engineering Faculty Publications

Complex phasor fields for electromagnetic wave propagation through von Karman turbulence and acousto-optic RF chaos are derived en route to the effective transfer function between chaos and narrow turbulence. Results are tested for several turbulence and chaos conditions.

The Electric Reel For Soccer Fields, Stephen Taylor

Electrical Engineering

Painting a soccer field consumes too much time. The process of reeling the string after laying out string along the field needs to improve. As a result, my project addresses improvements in how the workers retrieve the string through the production of an electric reel. This electric reel allows the worker to have control of the speed, direction, and on/off state of the device. Direction control allows the user ability to reel and unwind the string. Variable speed allows the user to control how fast the reel unwinds and reels the string. The device gathers string in an orderly manner …

Reducing Radio Frequency Susceptibilities In Commercial-Off-The-Shelf Camera Equipment For Use In Electromagnetic Compatibility Testing, Kevin Mainini

Electronic Theses and Dissertations

The Technical Testing and Analysis Center (TTAC) Group at Oak Ridge National Laboratory performs electromagnetic compatibility testing on various radiation detection units. These tests require remote viewing of the equipment’s display to monitor its compliance with national and international standards. The Commercial-Off-the-Shelf (COTS) camera equipment that is used to monitor the displays exhibits radio frequency susceptibilities causing issues when determining the actual susceptibilities of the device under test. In order to mitigate this issue, a COTS camera was placed in two common test positions and cycled through three angled orientations with various radio frequency shielding methods applied. The development of …

Segmentation Of Pulmonary Nodules In Computed Tomography Using A Regression Neural Network Approach And Its Application To The Lung Image Database Consortium And Image Database Resource Initiative Dataset, Temesguen Messay, Russell C. Hardie, Timothy R. Tuinstra

Electrical and Computer Engineering Faculty Publications

We present new pulmonary nodule segmentation algorithms for computed tomography (CT). These include a fully-automated (FA) system, a semi-automated (SA) system, and a hybrid system. Like most traditional systems, the new FA system requires only a single user-supplied cue point. On the other hand, the SA system represents a new algorithm class requiring 8 user-supplied control points. This does increase the burden on the user, but we show that the resulting system is highly robust and can handle a variety of challenging cases. The proposed hybrid system starts with the FA system. If improved segmentation results are needed, the SA …

Segmentation Of Pulmonary Nodules In Computed Tomography Using A Regression Neural Network Approach And Its Application To The Lung Image Database Consortium And Image Database Resource Initiative Dataset, Temesguen Messay, Russell C. Hardie, Timothy R. Tuinstra

Electrical and Computer Engineering Faculty Publications

We present new pulmonary nodule segmentation algorithms for computed tomography (CT). These include a fully-automated (FA) system, a semi-automated (SA) system, and a hybrid system. Like most traditional systems, the new FA system requires only a single user-supplied cue point. On the other hand, the SA system represents a new algorithm class requiring 8 user-supplied control points. This does increase the burden on the user, but we show that the resulting system is highly robust and can handle a variety of challenging cases. The proposed hybrid system starts with the FA system.

If improved segmentation results are needed, the SA …