Electrical and Electronics Commons^™

Design Of High Efficiency Doherty Power Amplifier, Kobi G. Kelly, Severin Pindell

Electrical Engineering

The project includes design and fabrication of a high efficiency power amplifier for a student design competition held at International Microwave Symposium (IMS) 2023. Efficient power amplifiers are critical for base station communication requiring efficient use of available power. The final design optimizes power added efficiency (PAE) and linearity. The amplifier will operate at 2.45 GHz. Competitive PAE above 50%, and C/I above 30 dB is achieved by leveraging a Doherty class amplifier using accurate discrete CGH4006P transistor models to simulate an efficient and linear design. Unique design features include optimal transistor bias point selection and power split ratios between …

Plc Course Development, Leonard Hernandez, Jacqueline Grace Radding

Electrical Engineering

The goal of this project is to design and construct the first lab experiment for the newly developed EE435 laboratory course. The experiment entails PLC programming to automate LED lighting in a simulated building. Starting with why PLCs are used, how to use the interface of EcoStruxure Control Expert V15.0 and practice using logic to control the dimming of a Light Emitting Diode (LED) to sustain a certain number of lumens consistent in a zone. Through the lab manual developed in this project, students will gain experience of creating logic designs using Function Block Diagram (FBD) and learn the layout …

Improvements Of Hybrid Ac/Dc House Prototype, Arden Abude

Electrical Engineering

This is an iteration from previous designs of the Hybrid AC/DC House with a systematic addition of a portable AC power supply unit. This iteration for the Hybrid AC/DC House is an innovation of independence for sustainable housing solutions. It will serve as an alternative for rural communities needing power to rely on self-sustainable microgrids rather than large-scale AC electric grids. The addition of a portable AC power supply would allow the microgrid to remove its reliance on AC power from the larger grid and would elevate the system to complete energy independence. The microgrid has DC power generated from …

Hybrid Wall Outlet For Ac Or Dc Power Delivery, Garrett Knoller, Kerr Allan, Greg Perini

Electrical Engineering

The goal of this project is to develop hybrid DC and AC wall outlets for an efficient, flexible power interface. A DC plug standard is also proposed to allow DC devices to be safely powered by the outlet with the correct DC voltage for each device. The primary objective is to create a power outlet compatible with the proposed DC plug as well as NEMA 5-15 AC plugs, enabling the same outlet to power both types of load as needed. The outlet is intended for buildings and systems transitioning to an isolated DC grid to encourage DC development and adoption. …

Low-Cost Portable Laser Communication Device, Tom Elkayam, Basile Louis Scoffie

Electrical Engineering

The portable laser communication device (PLCD), is a low cost system used to set up networks in data isolated regions via an optical line-of-sight communications protocol. In this manner the PLCD transmits at 9600 baud using UART protocol over the visible light band at 635nm. The device is intended to operate in indoor conditions and be semi-permanent until redeployed. The PLCD is built as a transmitter, receiver pair and when installed, utilizes tracking to find each other and automatically set up communication within a window of 30° laterally and 10° vertically. Each side of the system is less than 15 …

Hvac Fan Cooling System Using Modicon M580, Ogbonnaya Okoronkwo Okorie, Nicolas Jens Fache

Electrical Engineering

A common problem that many devices have when operating is overheating. Whether it is operating at full capacity or idle, those devices that we use exert heat to some type of extent. The physical and electronic components of the device can only withstand so much heat before the component becomes damaged. This product provides a method of preventing overheating by being a cooling system for your device. A solution for preventing overheating of the components in these electronic devices is by having some sort of cooling system. Our product’s cooling system will be based on energy efficiency, which means that …

Analog Circuits For Computing, Nicole Christine Pickett, Lauren Cathy Sueko Chun, Dillon Ryan Nguyen

Electrical Engineering

This project entails designing, simulating, and verifying analog circuits that can perform essential computing functions for power systems applications. The project aims to remedy critical challenges associated with handling calculations digitally, namely, time and power. This project's scope includes creating a library of circuits in SPICE that can be used to model and simulate complex mathematical equations. From these SPICE models, the circuit can be constructed physically, where the solution can be generated in less time using less power than doing the computation digitally. The performance and efficiency of analog computing will be measured and compared to conventional digital methods.

Vr Force Feedback Gloves, Mark Wu, Claire Chen

Electrical Engineering

The goal of this project is to produce a manufacturing plan for a consumer VR glove. The total addressable market of VR is over 170 million global users as of 2022 (Kolmar , 2022) with a serviceable available market of 300,000 users on Meta’s own social platform (Heath, 2022). The targeted Quest 2 platform utilizes handheld controllers, which causes a lack of immersivity in social settings and gaming scenarios. One common use of the platform involves social platforms such as “Horizons” where users meet in a virtual world to interact; handheld controllers don’t allow users to shake hands, make finger …

Cubicom: Noisy Office Environment Communication Device, Nicholas Alan Maley, Joshua Michael Heeren, Alejandro Peña

Electrical Engineering

The CubiCom is a system that enables secure and clear communication between users in a noisy office space. It can function in any small cubicle within a 12 foot radius. The system consists of a series of wireless headsets for 6 users to transmit and receive audio, and a communication box that facilitates this process. These headsets are noise-dampening, preventing ambient sounds from interrupting conversation and making sure that all parties can hear each other clearly. Line-of-sight (L.O.S.) with each headset is required to have proper communication between users. This feature ensures no one outside of the room can eavesdrop, …

Instrumented Control Column For Optionally Piloted Aircraft, Andrew J. Klein

Electrical Engineering

Natilus, an aerospace company that is rapid-prototyping optionally piloted aircraft (OPA) for the shipping industry, needs a system that retrieves control column position data in order to manipulate flight simulator parameters in software. At present, a universally compatible system for all aircraft does not exist. Typically, established aerospace companies will sink significant time and money into developing proprietary systems for control column data retrieval as every aircraft is unique in its layout and linkage design. However, as a startup developing their first aircraft, Natilus does not have the privilege of modifying an existing sensor system to work with their HIL …

Diy Cell Incubator, Hayden James Jeanor

Electrical Engineering

The purpose of creating a cell Incubator is for the development of cell and tissue production in laboratory settings. Large scale research projects and the medical community grow cells for various reasons, including experiments and creating tissue for patients. However, they cannot simply depend on growing cells in a petri dish that sit on a rack at room temperature. To grow heathy cells in the fastest way possible, they use cell incubators. Cell incubators create an atmosphere within the incubation bay that is designed to promote cell growth. The three main components that need to be constantly regulated, using a …

Smart Usb-C Wall Plug For The Dc House Project, Ridge Lahti, Dino Maslic

Electrical Engineering

DC operated devices and appliances powered by AC systems suffer inefficiencies resulting from the losses of converting AC energy into DC energy. At Cal Poly, the DC House Project aims to minimize the need for AC electricity in homes and encourage the use of renewable energy systems. The DC House uses a 48V DC bus that must be stepped down for use with increasing number of DC loads in a typical home. In this project, a Smart USB-C Wall Plug is designed to work with USB Power Delivery to provide a variable voltage output for use with these DC loads …

Smartphone Control Of Rc Cars, Weston R. Fitzgerald

Electrical Engineering

The smartphone-controlled RC (remote-controlled) car is an inexpensive remote-controlled car designed to be fast and portable. Instead of manufacturing, packaging, and shipping a separate controller, the remote control is implemented in a phone application, which saves time and money in both the design process and the manufacturing process. Utilizing the user’s smartphone is more cost-effective since mobile devices are a common recurrence, and packaging fewer devices results in overall better portability of the product.

This smartphone-controlled car is speedy and intuitive to learn for typical smartphone users. The user can change the car’s speed and direction wirelessly using their phone; …

Behind The Ear (Bte) Hearing Aid, Marco Gaitan, Jaclyn Kimoto, Lawrence Lai, Billy Pho

Electrical Engineering

The product is a Behind The Ear (BTE) hearing aid with the capability to improve the quality of life for people with mild to severe hearing loss and caters to a different consumer through bold exterior design to increase awareness of deafness and normalize hearing loss. In comparison to In The Ear (ITE) and In The Canal (ITC) hearing aids, the BTE hearing aid provides the best amplification while retaining an affordable price. Sound amplification depends on two or more directional microphones embedded in the product to give users the ability to discern the direction of incoming sound easily in …

Microgrid Energy Storage Branch, Evan Luu, Jeffrey Shieh

Electrical Engineering

The microgrid is the future for the electrical utility system. Because of this, future power engineers need to be well-versed in this topic when they go into industry. Cal Poly has created a microgrid laboratory for this very purpose. However, it is missing its battery based energy storage branch. Due to safety concerns, a traditional chemical battery is not suitable for student use. In order to maintain Cal Poly’s learn-by-doing approach, an alternative solution must be implemented. A regenerative power supply meets the criteria for student use. It is capable of simulating the sinking and sourcing capabilities of a battery …

Hvac Hardware Modeling Using Programmable Automatic Controller, Panthil Ketan Patel, Lumanti Tuladhar

Electrical Engineering

The primary purpose of this project is to use the donated programmable logic controllers (PLC) from Schneider Electric to develop experiments for a future lab class at Cal Poly. Our goal as the first group working on this project is to develop an experiment where the PLC can control the HVAC system based on temperature and humidity sensors and user inputs to maintain a desired consistent temperature. The PLC will be controlled using Unity Pro XLS/Control Expert software for simulations. The overall purpose of the experiments will be to demonstrate the potential of the PLC to minimize manual intervention while …

Load Slammer Design For Dc-Dc Converter Testing, Jonathan Hidalgo, Quinton Lacomb

Electrical Engineering

In this work, we dive into the detailed design of a test load or load slammer circuit for DC/DC converters to ensure their correct functioning. This is accomplished through quick variations in frequency, amplitude, and duty cycle of the current being drawn by the converter into the load. Computer simulations of the design were performed using LTSpice and the results show that the load current could be varied per design objectives. Hardware implementation of the design was also conducted and then tested. Results were then compared with the design requirements at lower currents to evaluate the validity of the design. …

Reverse Engineering And Enhancement Of Automobile Infotainment System, Cole Brinsfield

Electrical Engineering

In 2011, luxury cars were released with displays built into the center. With modern computing power and technology such as Android Auto or Apple CarPlay, these older infotainment systems degrade the value of cars that are otherwise comparable to 2021 models. This project upgrades the infotainment system of one such car, a 2011 Infiniti G37. Through use of an additional microcomputer in the car, an infotainment upgrade can be achieved. This upgraded infotainment adds navigation, wireless audio, and data display capabilities to the car, while maintaining the functionality of the stock infotainment. While customized for the 2011 Infiniti G37, the …

Checkerbot, Sean P. Whitty

Electrical Engineering

This product is able to play a game of checkers against the customer at three different preset difficulties. It can process the board on its turn, and displays its next turn to its opponent by updating the board state via the LEDs. It consists of a laptop screen display, and a computer chip with the programmed ability to process the checkers board and decide its next move. It provides the customer with an opponent that can be modified in difficulty so it can provide however much of a challenge as the customer desires, as well as allowing for a 2 …

Ac/Dc Led Light Bulb Adaptor With Internal Rechargeable Batteries, Esteban A. Rubio, Matthew R. Delaby

Electrical Engineering

To make a sustainable product and provide a temporary source of lights on during emergencies, this project aims to create a small unit that can be attached to a light bulb of any variety and connect it to a socket. Within the device is a rechargeable battery that, when the device is not connected to an 120V AC, 240V AC, or 48V DC power source, will power the light for a short period of time. The battery can be charged during the standard operation of the device and can be powered by the US and EU standard outlet voltages as …

Buck Converter With Voltage Foldback Protection, Fabian Aaron Enriquez, Pedro Rincon Rosales

Electrical Engineering

In this work, we implemented the idea of current foldback protection onto a buck converter. Current foldback protection essentially helps reduce the power dissipation which may be caused by a short circuit or overload scenario. To achieve the goal of this project, we used a combination of comparators, operational amplifiers and MOSFETs to create a current foldback sub controller. This controller would then serve as a feedback device between the output of the converter and the main controller to detect if a fault condition has occurred. Following the design, we performed simulation of the current foldback controller using PSpice and …

Power Line Coupling Power Supply Design, Janine Gian Christii C. Darato, Jeni K. Kawate, Nicholas A. Marta

Electrical Engineering

In this project, a power supply was designed for a startup company, Perch Sensing, to detect wildfires with the use of distributed sensors across power lines. The purpose of the power supply is to provide 15W of power to a microcontroller, which controls the sensor nodes. The power supply hangs from power lines and draws energy by inductively coupling to these lines. Our design starts with a current transformer that steps down the current from the power line, which is fed into a shunting mechanism as a safety precaution when the load is absent, then to the power supply itself. …

Tractor Hacking, Jin Huang, Kyle B. Kesler

Electrical Engineering

Tractor hacking arose from tractor owners' desire for full control over the tractors they purchase. Tractor manufacturers set strict security on the electrical components of their tractors, making it difficult for tractor owners to diagnose and monitor their tractors on their own. The UltraBlue Tractor Hacking project is a solution to this problem, allowing tractor owners to perform diagnostics and monitor the equipment they purchased without having to go through dealerships. From talking to farmers, we found that they valued a diagnostic tool that allows for clearing and resetting Diagnostic Trouble Codes (DTCs), viewing diagnostic data pertaining to a specific …

Led-Based Solar Simulator, Jonathan E. Honrada

Electrical Engineering

Solar simulators are great laboratory tools that help users conduct tests with solar cells indoors. Conventional solar simulators typically use xenon arc bulbs as a light source, which can have considerable disadvantages. Recent projects have sought to design and implement LED-based solar simulators, as they are more power-efficient, inexpensive, and durable.

Based on these advantages, the goal of this project is to create an LED-based solar simulator that can replicate the characteristics of solar light, but also be tunable with controls. This broadens the testing capabilities of the device, allowing users to conduct tests with more narrow spectrums of light …

Pilltank, Lucas Chang, Hayden Tam, Aaron Teh, Krista Round

Electrical Engineering

Imagine an elderly family member, going through their daily routine of taking their pills. They find their pill box; however, they are having trouble identifying all the pills in there. Is there a name on the tablet? Can they read what it says? Do they just trust that the medication in their box is correct? How can they properly take care of themselves if they can not even confirm that what they are taking is the right medication? To combat this issue that many face, we present PillTank.

To decrease the risk of consuming the wrong medication, PillTank identifies the …

Development Of A Low-Cost Hybrid Music Synthesizer, Spencer Rollins Drewry

Electrical Engineering

Until recently, affordable music equipment has always been seen as “budget”, providing a poor user experience. Inexpensive equipment was plagued with audible noise, signal integrity issues, and convoluted user interfaces. Companies like Teenage Engineering have proven that this does not have to be the case, in 2019 introducing their "Pocket Operator” series for $89. Due to the modern availability of low cost, high quality, consumer off the shelf [COTS] analog and digital components as well as creative engineering, the quality of inexpensive audio equipment has increased significantly. Despite these industry advances, the market is relatively small and shows a great …

Dc-Dc Buck Boost Converter Using The Lt8390 Controller And Gan High Electron Mobility Transistors, Juan Manuel Urbano Jr, Brian Thongchai Keokot

Electrical Engineering

California Polytechnic State University, San Luis Obispo’s ongoing Energy Harvesting from Exercise Machines (EHFEM) project creates a sustainable energy source by converting physical exercise from exercise machines into renewable electricity. Implementing energy harvesting technology into the Recreation Center’s exercise machines helps Cal Poly make progress on its goal of carbon neutrality by 2050 [1]. An improvement to the system with new technology increases Cal Poly Recreation Center’s ability to save money and improve sustainability.

The focus of this project improves the design of Nicholas Serres, who used the LT8390 controller in his buck boost DC-DC converter [2]. This project improves …

Wildfire Early Detection System (Weds), Mason Mciver, Vincent Liang, Jeanreno Racines

Electrical Engineering

With climate change causing an increase in temperature over the past several decades, wildfires have been burning hotter and moving quicker leaving a trail of destruction in their path. Detecting a wildfire early allows firefighters to respond efficiently and effectively to ensure containment. With the rise of advanced computer vision and algorithms, autonomous systems can be used to monitor and report any fire activity. Having multiple devices spread out across a large area will allow first responders to map out the fire location and track the fire. By utilizing smart technologies, property damage can be minimized and residents living in …

Miniaturized Ultraviolet Imager High Voltage Power Supply, Nicholas Palmer, Jason Thomas Heil

Electrical Engineering

Sending satellites into orbit becomes exponentially more expensive with weight and size, so designing high-voltage DC-DC converters that can achieve kilovolt level outputs in a small form factor is crucial to reducing costs. The Miniaturized Ultraviolet Imager (MUVI) aims to monitor Earth’s ionosphere and report weather patterns to climate scientists within a 2U cube satellite footprint. The imaging equipment consists of a microchannel plate and phosphor screen that require 2.5kV and 5.5kV respectively at microamp level currents. This report explains the implementation of a high voltage boost cascaded flyback converter to meet all of the MUVI satellite output voltage requirements. …

Portable Ventilator, Bradley C. Weeks, Jack W. Brewer, Sanders Sanabria

Electrical Engineering

The current COVID-19 pandemic has heavily impacted the healthcare system in the United States and elsewhere. The need for patients to have access to a hospital with a ventilator along with a shortage of ventilators for recovery and at-home care as a result of minimal hospital vacancy for patients has been greatly stressed. The presented problem is both an unmet demand and supply of portable and effective ventilators. Existing ventilators have many shortcomings that should be addressed: size, weight, cost, and complexity of current ventilators confines users to stay in a medical facility whilst being monitored by professionals. This both …