Electrical and Electronics Commons^™

Isolation And Characterization Of Caffeine-Degrading Bacteria From Coffee Plantation Areas In Malaysia, Elvina Clarie Dullah, Mohd Fazli Farida Asras

Makara Journal of Technology

Decaffeination by microbial degradation is currently the most optimal and low-cost approach, involving only microbial cells and/or their enzymes. The bacterium was characterized using a series of biochemical tests. Positive results were obtained from carbohydrate fermentation, citrate utilization, and catalase tests, while negative results were obtained from Voges-Proskauer (VP) and indole tests. Three different caffeine concentrations of 0.25%, 0.4%, and 2% were tested and measured through Gas Chromatography-Mass Spectrophotometry (GC-MS) analysis. The highest caffeine reduction (89.25%) was found when 0.25% caffeine was used in the media. Only a small amount of caffeine was reduced to 0.4% and 2%, with 34.78% …

Optimization Of The Building Envelope And Roof Shading To Reduce The Energy Consumption Of College Low-Rise Buildings In Indonesia, Nasruddin Nasruddin, Azimil Gani Alam, Mohammad Imroz Sohel

Makara Journal of Technology

Energy consumption in buildings is a crucial concern globally, prompting researchers to explore innovative solutions to mitigate its impact. This study investigates the optimization of building envelopes and roof shading systems of existing buildings in Indonesia to realize notable energy savings. Multiple scenarios were explored, with modifications to building envelopes and roof shading, highlighting the overall thermal transfer value as a key parameter. Using EnergyPlus simulations, the efficacy of natural ventilation in corridors and roof shading modifications was assessed in reducing energy consumption. The findings revealed that renovating existing buildings by optimization of the building envelope and roof shading by …

Low-Power, Event-Driven System On A Chip For Charge Pulse Processing Applications, Joseph A. Schmitz

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

This dissertation presents an electronic architecture and methodology capable of processing charge pulses generated by a range of sensors, including radiation detectors and tactile synthetic skin. These sensors output a charge signal proportional to the input stimulus, which is processed electronically in both the analog and digital domains. The presented work implements this functionality using an event-driven methodology, which greatly reduces power consumption compared to standard implementations. This enables new application areas that require a long operating time or compact physical dimensions, which would not otherwise be possible. The architecture is designed, fabricated, and tested in the aforementioned applications to …

A Modular Framework For Surface-Embedded Actuation And Optical Sensing In Soft Robots., Paul Bupe Jr

Electronic Theses and Dissertations

This dissertation explores the development and integration of modular technologies in soft robotics, with a focus on the OptiGap sensor system. OptiGap serves as a simple, flexible, cost-effective solution for real-time sensing of bending and deformation, validated through simulation and experimentation. Working as part of an emerging category of soft robotics called Soft, Curved, Reconfigurable, Anisotropic Mechanisms, or SCRAMs, this research also introduces the Thermally-Activated SCRAM Limb (TASL) technology, which employs shape-memory alloy (SMA) wire embedded in curved sheets for surface actuation and served as the initial inspiration for OptiGap. In addition, the EneGate system is presented as a complementary …

Challenges In Optimization For The Performance On Sustainability Dimensions In Reverse Logistics Social Responsibility, Sumarsono Sudarto, Katsuhiko Takahashi, Mochammad Dewo

Makara Journal of Technology

Reverse logistics social responsibility is preferred as the most acceptable solution for addressing the challenges in stakeholders’ debate regarding social responsibility in supply chains because it involves as many actors as possible in the supply chain to perform social responsibility to achieve sustainability. This paper explores the challenges in achieving optimal policies in sustainability dimensions for collection and recycling facilities in reverse logistics. Sustainability dimensions include economic, environmental, and social aspects. The reverse logistics is modeled on System Dynamics, and a simplified statistical analysis using a contour chart is employed in numerical experiments. Results show a narrow area of optimal …

Development Of A Soft Robotic Approach For An Intra-Abdominal Wireless Laparoscopic Camera, Hui Liu

Doctoral Dissertations

In Single-Incision Laparoscopic Surgery (SILS), the Magnetic Anchoring and Guidance System (MAGS) arises as a promising technique to provide larger workspaces and field of vision for the laparoscopes, relief space for other instruments, and require fewer incisions. Inspired by MAGS, many concept designs related to fully insertable magnetically driven laparoscopes are developed and tested on the transabdominal operation. However, ignoring the tissue interaction and insertion procedure, most of the designs adopt rigid structures, which not only damage the patients' tissue with excess stress concentration and sliding motion but also require complicated operation for the insertion. Meanwhile, lacking state tracking of …

Virtual Prototyping Of Pebb Based Power Electronics System For Ground Vehicles, Yi Li

All Theses

Power electronics are heavily involved in power and energy systems in plenty of applications nowadays. The increase of demand brings more challenges into simulations for development. Considering the complexity of the systems and high frequency operational conditions, this paper presents comprehensive research on modeling, simulating, and validation on ground vehicle propulsion system applications.

To reduce the computational burden, the Power Electronics Building Blocks concept is utilized to simplify the structure of modeling under different conversion scenarios in ground vehicle systems. In addition, the Average and Switching versions models are included. To speedup the simulation, the engagement of advanced computing technique …

Round Trip Time Measurement Over Microgrid Power Network, Yasin Emir Kutlu, Ruairí De Fréin, Malabika Basu, Ali Malik

Conference papers

A focus of the Power Systems and Networking communities is the design and deployment of Microgrid (MG) integration systems that ensure that quality of service targets are met for load sharing systems at different endpoints. This paper presents an integrated Microgrid testbed that allows Microgrids endpoints to share their current, voltage and power values using a Network Published Shared Variable (NPSV) approach. We present Round Trip Time (RTT) measurements for time sensitive Microgrid control traffic in the presence of varying background traffic as an example quality of service measurement. Numerical results are presented using a range of different background traffic …

Vr Force Feedback Gloves, Mark Wu, Claire Chen

Electrical Engineering

The goal of this project is to produce a manufacturing plan for a consumer VR glove. The total addressable market of VR is over 170 million global users as of 2022 (Kolmar , 2022) with a serviceable available market of 300,000 users on Meta’s own social platform (Heath, 2022). The targeted Quest 2 platform utilizes handheld controllers, which causes a lack of immersivity in social settings and gaming scenarios. One common use of the platform involves social platforms such as “Horizons” where users meet in a virtual world to interact; handheld controllers don’t allow users to shake hands, make finger …

Using An Embedded System For A Quality Cup Of Coffee, Evan Powers, Joshua Stermer, Tsion Yohannes

2023 Symposium

Many coffee lovers spend up to $5 on a cup of coffee everyday. To save money one could make them at home, but a quality machine with PIDs start at $1000. Using an embedded system one could spend less than $50 and a few hours implement PIDs into an existing $400 machine that will last a lifetime. microcontroller. Learning C language combined with hardware implementation applied to cheap and simple everyday objects can improve everyday quality of life and save money.

This is challenging because we have to incorporate the additional circuitry into a pre established circuit with limited space, …

Vi Energy-Efficient Memristor-Based Neuromorphic Computing Circuits And Systems For Radiation Detection Applications, Jorge Iván Canales Verdial

Electrical and Computer Engineering ETDs

Radionuclide spectroscopic sensor data is analyzed with minimal power consumption through the use of neuromorphic computing architectures. Memristor crossbars are harnessed as the computational substrate in this non-conventional computing platform and integrated with CMOS-based neurons to mimic the computational dynamics observed in the mammalian brain’s visual cortex. Functional prototypes using spiking sparse locally competitive approximations are presented. The architectures are evaluated for classification accuracy and energy efficiency. The proposed systems achieve a 90% true positive accuracy with a high-resolution detector and 86% with a low-resolution detector.

Power Amplifier Based On Composite Injection-Voltaic Transistors, Nodira Batirdjanovna Alimova

Chemical Technology, Control and Management

The problem of high-current radio engineering devices is related to the fact that the use of high-power transistors and other semiconductor devices is limited by such a phenomenon as a secondary breakdown, in which there is a sharp decrease in the voltage on the device with simultaneous internal current lacing, and the device fails. To solve the problem of secondary breakdown, schemes have been proposed that operate stably at reverse voltage values 4-5 times higher than usual and at power dissipation 2-3 times higher than the maximum allowable power for an individual device. The problem is proposed to be solved …

Implementation Of Static Rfid Landmarks In Slam For Planogram Compliance, Brennan L. Drake

Honors College Theses

Autonomous robotic systems are becoming increasingly prevalent in everyday life and exhibit robust solutions in a wide range of applications. They face many obstacles with the foremost of which being SLAM, or Simultaneous Localization and Mapping, that encompasses both creation of the map of an unknown environment and localization of the robot in said environment. In this experiment, researchers propose the use of RFID tags in a semi-dynamic commercial environment to provide concrete landmarks for localization and mapping in pursuit of increased locational certainty. With this obtained, the ultimate goal of the research is to construct a robotics platform for …

Energy-Aware Ai-Driven Framework For Edge-Computing-Based Iot Applications, Muhammad Zawish, Nouman Ashraf, Rafay Iqbal Ansari, Steven Davy

Conference papers

The significant growth in the number of Internet of Things (IoT) devices has given impetus to the idea of edge computing for several applications. In addition, energy harvestable or wireless-powered wearable devices are envisioned to empower the edge intelligence in IoT applications. However, the intermittent energy supply and network connectivity of such devices in scenarios including remote areas and hard-to-reach regions such as in-body applications can limit the performance of edge computing-based IoT applications. Hence, deploying state-of-the-art convolutional neural networks (CNNs) on such energy-constrained devices is not feasible due to their computational cost. Existing model compression methods, such as network …

Optimising Electric Vehicle Charging Infrastructure In Dublin Using Geecharge, Alexander Mutua Mutiso, Ruairí De Fréin, Ali Malik, Eliel Kibanza, Marco Sahbane, Maxime Pantel

Conference papers

Range anxiety poses a hurdle to the adoption of Electric Vehicles (EVs), as drivers worry about running out of charge without timely access to a Charging Point (CP). We present novel methods for optimising the distribution of CPs, namely, EV portacharge and GEECharge. These solutions distribute CPs in Dublin, in this paper, by considering the population density and Points Of Interest (POIs) or road traffic. The object of this paper is to (1) develop and evaluate methods to distribute CPs in Dublin city; (2) optimise CP allocation; (3) visualise paths in the graph network to show the most used roads …

Co-Design Of An Interactive Wellness Park: Exploring Design Requirements For A Multimodal Outdoor Physical Web Installation With Older Adults, Fatima Badmos

Academic Posters Collection

The global demographic landscape is experiencing a notable shift, characterised by a growing proportion of adults over 60. According to projections, the proportion of individuals aged 60 and above is expected to reach one-sixth of the global population by 2030. Furthermore, by 2050, this demographic is projected to exceed a staggering two billion people. Amidst this shift, there is an urgent need to develop interactive and innovative solutions to address older adults' unique challenges, particularly in outdoor physical activity.

A co-design methodology involving older adults’ participation from the idea generation to the application development process will be adopted to address …

Wifi Sensing At The Edge Towards Scalable On-Device Wireless Sensing Systems, Steven M. Hernandez

Theses and Dissertations

WiFi sensing offers a powerful method for tracking physical activities using the radio-frequency signals already found throughout our homes and offices. This novel sensing modality offers continuous and non-intrusive activity tracking since sensing can be performed (i) without requiring wearable sensors, (ii) outside the line-of-sight, and even (iii) through the wall. Furthermore, WiFi has become a ubiquitous technology in our computers, our smartphones, and even in low-cost Internet of Things devices. In this work, we consider how the ubiquity of these low-cost WiFi devices offer an unparalleled opportunity for improving the scalability of wireless sensing systems. Thus far, WiFi sensing …

Assessing The Performance Of A Particle Swarm Optimization Mobility Algorithm In A Hybrid Wi-Fi/Lora Flying Ad Hoc Network, William David Paredes

UNF Graduate Theses and Dissertations

Research on Flying Ad-Hoc Networks (FANETs) has increased due to the availability of Unmanned Aerial Vehicles (UAVs) and the electronic components that control and connect them. Many applications, such as 3D mapping, construction inspection, or emergency response operations could benefit from an application and adaptation of swarm intelligence-based deployments of multiple UAVs. Such groups of cooperating UAVs, through the use of local rules, could be seen as network nodes establishing an ad-hoc network for communication purposes.

One FANET application is to provide communication coverage over an area where communication infrastructure is unavailable. A crucial part of a FANET implementation is …

Design And Fabrication Of A Force-Displacement Control Mechanism For Bone-Surgical Tool Testing, Kenneth Nwagu

Electronic Theses and Dissertations

This project focuses on the design and fabrication of an experimental setup for orthopedic-tool testing, tailored for a surgical instrumentation company. The multifaceted project encompasses a literature review, conceptual design, prototyping, and rigorous testing, resulting in a versatile control system capable of assessing various orthopedic tools, including bone drills, saws, burrs, and power handpieces.

Orthopedic surgical procedures (which include cutting and/or drilling into bone) often need to be performed on bones for faster recovery. The drilling and cutting process can cause an increase in temperature at the cutting site which can cause bone necrosis. The tools also need to be …

Enhancing Traffic Safety In Unpredicted Environments With Integration Of Adas Features With Sensor Fusion In Intelligent Electric Vehicle Platform With Implementation Of Environmental Mapping Technology, David S. Obando Ortegon

Electronic Theses and Dissertations

A major objective on society is to reduce the number of accidents and fatalities on the road for drivers, and pedestrians. Therefore, the automotive engineering field is working on this problem through the development and integration of safety technologies such as advanced driving assistance systems. For this reason, this work was intended to develop and evaluate the performance of different ADAS features and IV technologies under unexpected scenarios. This by the development of safety algorithms applied to the intelligent electric vehicle designed and built in this work, through the use of ADAS sensors based on sensor fusion. Evaluation of AEB, …