Controls and Control Theory Commons^™

Crazyflie 2.1 Quadcopter Nonlinear System Identification, Nhat V. Nguyen, Hope Storro, John Plimpton

2023 Symposium

Quadcopters (quad) are used widely in many industries with crucial applications such as infrastructure inspection or package delivery. The Crazyflie 2.1 quad from Bitcraze provides an excellent platform for research and development. In this project, our goal is to perform system identification on the Crazyflie to propose a complete model. A gray box method is explored, which includes leveraging the parameters that are already known, to develop a set of equations. Through theory, simulations, and measurements, a complete quadcopter model is developed.

Design And Fabrication Of A Force-Displacement Control Mechanism For Bone-Surgical Tool Testing, Kenneth Nwagu

Electronic Theses and Dissertations

This project focuses on the design and fabrication of an experimental setup for orthopedic-tool testing, tailored for a surgical instrumentation company. The multifaceted project encompasses a literature review, conceptual design, prototyping, and rigorous testing, resulting in a versatile control system capable of assessing various orthopedic tools, including bone drills, saws, burrs, and power handpieces.

Orthopedic surgical procedures (which include cutting and/or drilling into bone) often need to be performed on bones for faster recovery. The drilling and cutting process can cause an increase in temperature at the cutting site which can cause bone necrosis. The tools also need to be …

Design Of Control System With Feedback Loop For A Pulsatile Pump, Ian Scott Sanders

Graduate Theses and Dissertations

This paper describes the design and implementation of a closed-loop proportional, integral, differential (PID) control system for a custom in-house pulsatile pump apparatus for the University of Arkansas Biomedical Department. The control system is designed to control a MOONS’ PL34HD0L8500 hybrid stepper motor using a dual H-bridge motor driver network with four pulse-width modulated (PWM) inputs to drive a pulsatile pump apparatus at motor stepping frequencies up to 2kHz. The speed of the motor is controlled from a pressure profile transmitted from an external source over RS-232 communication that specifies the motor speed, number of datapoints, and an array of …

Local And Central Controllers For Microgrids, Edgar Ariel Escala Calame

Graduate Theses and Dissertations

The main objective of this thesis is to serve as a guide, so readers are able to learn about microgrids and to design simple controllers for different AC microgrid applications. In addition, this thesis has the objective to provide examples of simulation cases for the hierarchical structure of a basic AC microgrid which can be used as a foundation to build upon, and achieve more complex microgrid structures as well as more sophisticated power-converter control techniques.

To achieve these objectives, the modeling of voltage source converters and control design in the z-domain are presented. Moreover, the implementation and transient analysis …

Modeling And Design Of A Low-Level Rf Control System For The Accumulator Ring At Spallation Neutron Source, Michael G. Trout

Masters Theses

Since its commissioning in 2006, Spallation Neutron Source (SNS) at Oak Ridge National Laboratory has greatly contributed to the field of neutron science, but some critical systems are reaching end-of-life. This obsolescence must be addressed for the accelerator to continue providing world-class research capabilities. One such system needing redesign is the low-level RF (LLRF) control system for the proton accumulator ring. While this system has performed acceptably for over a decade, it is sparsely documented and robust operational models are unavailable. To ensure the new design meets or exceeds current performance metrics, we analyzed the existing LLRF control system and …

Inter-Row Robot Navigation Using 1d Ranging Sensors, Tyler A. Troyer, Santosh Pitla, Ethan Nutter

Biological Systems Engineering: Papers and Publications

In this paper a fuzzy logic navigation controller for an inter-row agricultural robot is developed and evaluated in laboratory settings. The controller receives input from one-dimensional (1D) ranging sensors on the robotic platform, and operated on ten fuzzy rules for basic row-following behavior. The control system was implemented on basic hardware for proof of concept and operated on a commonly available microcontroller development platform and open source software libraries. The robot platform used for experimentation was a small tracked vehicle with differential steering control. Fuzzy inferencing and defuzzification, step response and cross track error were obtained from the test conducted …

Characterization Of Optimal Cyber Attacks On Control Systems, Anis Drira

Doctoral Dissertations

Securing control systems which manage the nation's critical physical infrastructures and key resources is becoming one of the highest priorities and can no longer be ignored. Several researches and incidents have confirmed the real vulnerability of these systems. Due to the vital role of control systems, the study and the development of advanced strategies to overcome these cyber-security breaches are very important. Control systems are mainly composed of sensors and actuators, which cyber-security is vital for the security of the whole control system.

Characterizing and guarding against worst case attack scenarios is important to secure control systems. This dissertation proposes …

The Wireless Control Network: Synthesis And Robustness, Miroslav Pajic, Shreyas Sundaram, Jerome Le Ny, George J. Pappas, Rahul Mangharam

Rahul Mangharam

We consider the problem of stabilizing a plant with a network of resource constrained wireless nodes. Traditional networked control schemes are designed with one of the nodes in the network acting as a dedicated controller, while the other nodes simply route information to and from the controller and the plant. We introduce the concept of a Wireless Control Network (WCN) where the entire network itself acts as the controller. Specifically, at each time-step, each node updates its internal state to be a linear combination of the states of the nodes in its neighborhood. We show that this causes the entire …

The Wireless Control Network: Synthesis And Robustness, Miroslav Pajic, Shreyas Sundaram, Jerome Le Ny, George J. Pappas, Rahul Mangharam

George J. Pappas

We consider the problem of stabilizing a plant with a network of resource constrained wireless nodes. Traditional networked control schemes are designed with one of the nodes in the network acting as a dedicated controller, while the other nodes simply route information to and from the controller and the plant. We introduce the concept of a Wireless Control Network (WCN) where the entire network itself acts as the controller. Specifically, at each time-step, each node updates its internal state to be a linear combination of the states of the nodes in its neighborhood. We show that this causes the entire …

The Wireless Control Network: Synthesis And Robustness, Miroslav Pajic, Shreyas Sundaram, Jerome Le Ny, George J. Pappas, Rahul Mangharam

George J. Pappas

We consider the problem of stabilizing a plant with a network of resource constrained wireless nodes. Traditional networked control schemes are designed with one of the nodes in the network acting as a dedicated controller, while the other nodes simply route information to and from the controller and the plant. We introduce the concept of a Wireless Control Network (WCN) where the entire network itself acts as the controller. Specifically, at each time-step, each node updates its internal state to be a linear combination of the states of the nodes in its neighborhood. We show that this causes the entire …

The Wireless Control Network: Synthesis And Robustness, Miroslav Pajic, Shreyas Sundaram, Jerome Le Ny, George J. Pappas, Rahul Mangharam

George J. Pappas

We consider the problem of stabilizing a plant with a network of resource constrained wireless nodes. Traditional networked control schemes are designed with one of the nodes in the network acting as a dedicated controller, while the other nodes simply route information to and from the controller and the plant. We introduce the concept of a Wireless Control Network (WCN) where the entire network itself acts as the controller. Specifically, at each time-step, each node updates its internal state to be a linear combination of the states of the nodes in its neighborhood. We show that this causes the entire …