Controls and Control Theory Commons^™

Fair Fault-Tolerant Approach For Access Point Failures In Networked Control System Greenhouses, Mohammed Ali Yaslam Ba Humaish

Theses and Dissertations

Greenhouse Networked Control Systems (NCS) are popular applications in modern agriculture due to their ability to monitor and control various environmental factors that can affect crop growth and quality. However, designing and operating a greenhouse in the context of NCS could be challenging due to the need for highly available and cost-efficient systems. This thesis presents a design methodology for greenhouse NCS that addresses these challenges, offering a framework to optimize crop productivity, minimize costs, and improve system availability and reliability. It contributes several innovations to the field of greenhouse NCS design. For example, it recommends using the 2.4GHz frequency …

Improving Intelligent Transportation Safety And Reliability Through Lowering Costs, Integrating Machine Learning, And Studying Model Sensitivity, Cavender Holt

All Theses

As intelligent transportation becomes increasingly prevalent in the domain of transportation, it is essential to understand the safety, reliability, and performance of these systems. We investigate two primary areas in the problem domain. The first area concerns increasing the feasibility and reducing the cost of deploying pedestrian detection systems to intersections in order to increase safety. By allowing pedestrian detection to be placed in intersections, the data can be better utilized to create systems to prevent accidents from occurring. By employing a dynamic compression scheme for pedestrian detection, we show the reduction of network bandwidth improved by 2.12× over the …

Evaluating Testing Procedures For Openflow Controller Network Re-Provisioning Time, Steven J. Jensen

Theses and Dissertations

Software-Defined Networking promises several advantages over traditional networking architectures, but has seen little adoption. Recently codified controller evaluation methodologies have seen little validation without strong statistical analysis of the results. The research developed an environment testing implementing a published Network Re-provisioning Time methodology to evaluate five OpenFlow controllers. The methodology is strong with required parameters but had issues with some edge cases. Further refinement and adding a convergence metric may close the gaps.

A General Framework For Characterizing And Evaluating Attacker Models For Cps Security Assessment, Christopher S. Deloglos, Christopher Deloglos

Theses and Dissertations

Characterizing the attacker’s perspective is essential to assessing the security posture and resilience of cyber-physical systems. The attacker’s perspective is most often achieved by cyber-security experts (e.g., red teams) who critically challenge and analyze the system from an adversarial stance. Unfortunately, the knowledge and experience of cyber-security experts can be inconsistent leading to situations where there are gaps in the security assessment of a given system. Structured security review processes (such as TAM, Mission Aware, STPA-SEC, and STPA-SafeSec) attempt to standardize the review processes to impart consistency across an organization or application domain. However, with most security review processes, the …

Light Loaded Automated Guided Vehicle, Marcus Radtka, Nazar Paramashchuk, Lawrence Shevock

Williams Honors College, Honors Research Projects

The objective of the locomotion system was to design and implement the mechanical, electrical, and software related functions to ensure the LLAGV had the capability of maneuvering its surroundings. The LLAGV’s motors were represented in an open loop transfer function to utilize RPM feedback and a compensator when needed. The modeled compensator helped control the LLAGV’s speed and acceleration, enabling further control of the LLAGV. The internal circuitry has the means to properly distributed power to all components and allowed the user to control the LLAGV to their desire. The application software within the LLAGV locomotion system (LLAGV-LS) had consideration …

Integration Of Robotic And Electro-Pneumatic Systems Using Advanced Control And Communication Schemes, Chinmay Kondekar

Dissertations, Master's Theses and Master's Reports

Modern industrial automation systems are designed by interconnecting various subsystems which work together to perform a process. The thesis project aims to integrate fragmented subsystems into a flexible and reconfigurable system through advanced communication protocols and perform a process to demonstrate the effectiveness of interconnected systems.

The system consists of three six-axis robots, one electro-pneumatic robot, and two conveyors connected using EthernetIP communication and hardwired connections. The interconnected system works together to perform machining of a workpiece using advanced control methods of CAD to robot path generation, central control through a PLC, and process control through HMI.

Standardized programming blocks …

Digital, Automated Reactive Target System, Nicholas Haas, Saipranay Vellala, Trandon Ware, Thomas Martin

Williams Honors College, Honors Research Projects

In this era, technology is woven into almost every facet of our leisure activities. Although technology has innovated hobbies ranging from chess to soccer, the art of shooting has been neglected. Unnecessary insufficiency such as bullet ricochets off of mechanical steel targets, ineffective progress tracking, and general inaccessibility to outdoor training facilities are all improvable areas of this sport. The Dynamic Automated Reactive Target (D.A.R.T) System aims to fill some of these gaps and help modernize recreational marksmanship. Modeling the system after a dueling tree will optimize the use of the system and allow for different training models to challenge …

Resource Optimization In Wireless Sensor Networks For An Improved Field Coverage And Cooperative Target Tracking, Husam Sweidan

Dissertations, Master's Theses and Master's Reports

There are various challenges that face a wireless sensor network (WSN) that mainly originate from the limited resources a sensor node usually has. A sensor node often relies on a battery as a power supply which, due to its limited capacity, tends to shorten the life-time of the node and the network as a whole. Other challenges arise from the limited capabilities of the sensors/actuators a node is equipped with, leading to complication like a poor coverage of the event, or limited mobility in the environment. This dissertation deals with the coverage problem as well as the limited power and …

Automation In Entertainment: Concept, Design, And Application, Ryan Thally

Undergraduate Honors Theses

The focus of this thesis is to explore the automation technology used in the modern entertainment industry. Upon completion of my thesis, I will deliver a working prototype of the chosen technology and present its capabilities in a choreographed show.

A Framework For Categorization Of Industrial Control System Cyber Training Environments, Evan G. Plumley

Theses and Dissertations

First responders and professionals in hazardous occupations undergo training and evaluations for the purpose of mitigating risk and damage. For example, helicopter pilots train with multiple categorized simulations that increase in complexity before flying a real aircraft. However in the industrial control cyber incident response domain, where incident response professionals help detect, respond and recover from cyber incidents, no official categorization of training environments exist. To address this gap, this thesis provides a categorization of industrial control training environments based on realism. Four levels of environments are proposed and mapped to Blooms Taxonomy. This categorization will help organizations determine which …

Contributions To Edge Computing, Vernon K. Bumgardner

Theses and Dissertations--Computer Science

Efforts related to Internet of Things (IoT), Cyber-Physical Systems (CPS), Machine to Machine (M2M) technologies, Industrial Internet, and Smart Cities aim to improve society through the coordination of distributed devices and analysis of resulting data. By the year 2020 there will be an estimated 50 billion network connected devices globally and 43 trillion gigabytes of electronic data. Current practices of moving data directly from end-devices to remote and potentially distant cloud computing services will not be sufficient to manage future device and data growth.

Edge Computing is the migration of computational functionality to sources of data generation. The importance of …

Forest Sign Maker, Victor Espinosa Iii, Kevin Ly, Lisa Yip

Mechanical Engineering

Executive Summary:

The Inyo National Forest is arguably one of the most beautiful locations in California, containing natural masterpieces such as Mount Whitney and the Ancient Bristlecone Pine Forest. Despite its magnificence, the Inyo National Forest can be a treacherous region. The Friends of the Inyo take pride in being able to facilitate the viewing experience for all outdoorsmen by maintaining the mountain trails, which includes providing adequate trail signage.

Unfortunately, there is a fundamental issue with the recent state of trail signage in the Inyo National Forest: the rate at which signs are being vandalized or naturally destroyed is …

Interpreting, Stephanie Jo Kent

Doctoral Dissertations

What do community interpreting for the Deaf in western societies, conference interpreting for the European Parliament, and language brokering in international management have in common? Academic research and professional training have historically emphasized the linguistic and cognitive challenges of interpreting, neglecting or ignoring the social aspects that structure communication. All forms of interpreting are inherently social; they involve relationships among at least three people and two languages. The contexts explored here, American Sign Language/English interpreting and spoken language interpreting within the European Parliament, show that simultaneous interpreting involves attitudes, norms and values about intercultural communication that overemphasize information and discount …

Neuromodulation Based Control Of Autonomous Robots On A Cloud Computing Platform, Cameron Muhammad

Electronic Theses and Dissertations

In recent years, the advancement of neurobiologically plausible models and computer networking has resulted in new ways of implementing control systems on robotic platforms. The work presents a control approach based on vertebrate neuromodulation and its implementation on autonomous robots in the open-source, open-access environment of robot operating system (ROS). A spiking neural network (SNN) is used to model the neuromodulatory function for generating context based behavioral responses of the robots to sensory input signals. The neural network incorporates three types of neurons- cholinergic and noradrenergic (ACh/NE) neurons for attention focusing and action selection, dopaminergic (DA) neurons for rewards- and …

Design Of An Energy Efficient Virtual End Node Client Using Openadr2.0a And Smap, Kevin Navero

BioResource and Agricultural Engineering

Demand Response (DR) describes the set of actions taken to impose a reduction in electrical loads to stabilize the power grid and decrease costs. It is used when power grid emergencies or extremely high demand and congestion, threaten the electricity supply-demand balance. Automated Demand Response (ADR) describes a web-based control system that triggers DR events automatically by signaling other pre-programmed control systems. This project intends to use the OpenADR2.0 specifications provided by the OpenADR Alliance to construct an open source Virtual End Node (VEN) client to retrieve DR signals. The Simple Measurement and Actuation Profile (sMAP) software is also used …

Emulation Of Industrial Control Field Device Protocols, Robert M. Jaromin

Theses and Dissertations

It has been shown that thousands of industrial control devices are exposed to the Internet, however, the extent and nature of attacks on such devices remains unknown. The first step to understanding security problems that face modern supervisory control and data acquisition (SCADA) and industrial controls networks is to understand the various attacks launched on Internet-connected field devices. This thesis describes the design and implementation of an industrial control emulator on a Gumstix single-board computer as a solution. This emulator acts as a decoy field device, or honeypot, intended to be probed and attacked via an Internet connection. Evaluation techniques …

Frg Turbojet, Tyler Vitti

Computer Engineering

Members of the Cal Poly SLO campus club FRG work together with students of several different disciplines to build a functional turbojet engine. Engineering approaches include design, fabrication, testing, and computer sensing, control, and integration. The goal of the project is to produce a running turbojet engine monitored and controlled by embedded hardware and specialized PC software. This project is to be used by later groups for further research and development.

Creating A Network Model For The Integration Of Dynamic And Static Supervisory Control And Data Acquisition (Scada) Test Environment, Marlon Coerbell

Theses and Dissertations

Since 9/11 protecting our critical infrastructure has become a national priority. Presidential Decision Directive 63 mandates and lays a foundation for ensuring all aspects of our nation's critical infrastructure remain secure. Key in this debate is the fact that much of our electrical power grid fails to meet the spirit of this requirement. My research leverages the power afforded by Electric Power and Communication Synchronizing Simulator (EPOCHS) developed with the assistance of Dr. Hopkinson, et al. The power environment is modeled in an electrical simulation environment called PowerWorld©. The network is modeled in OPNET® and populated with self-similar network and …

Decisive Routing And Admission Control According To Quality Of Service Constraints, Cindy C. Reese

Theses and Dissertations

This research effort examines, models, and proposes options to enhance command and control for decision makers when applied to the communications network. My goal is to research the viability of combining three students’ past research efforts and expanding and enhancing those efforts. The area of this research is predicting a snapshot of the communications network, context-aware routing between network nodes, and Quality of Service-based routing optimization in order to create an intelligent routing protocol platform. It will consolidate efforts from an Intelligent Agent Based Framework to Maximize Information Utility by Captain John Pecarina, Dialable Cryptography for Wireless Networks by Major …

Stochastic Estimation And Control Of Queues Within A Computer Network, Mingook Kim

Theses and Dissertations

Captain Nathan C. Stuckey implemented the idea of the stochastic estimation and control for network in OPNET simulator. He used extended Kalman filter to estimate packet size and packet arrival rate of network queue to regulate queue size. To validate stochastic theory, network estimator and controller is designed by OPNET model. These models validated the transient queue behavior in OPNET and work of Kalman filter by predicting the queue size and arrival rate. However, it was not enough to verify a theory by experiment. So, it needed to validate the stochastic control theory with other tools to get high validity. …

Adaptive Control Of Woofer-Tweeter Adaptive Optics, Jimmie J. Perez

Theses and Dissertations

Adaptive optics applies advanced sensing and control to improve the ability of optical systems to collect images through a turbulent atmosphere. The results of this research effort demonstrate that the combination of two recent approaches improves the performance of adaptive optics in directed energy and laser communication scenarios. The first approach is adaptive control, which offers improved performance over fixed-gain controllers in the presence of rapidly changing turbulence. The second approach incorporated into the study is a dual-mirror system. The two mirrors are a high-bandwidth, low-actuator-stroke (tweeter) mirror and a low-bandwidth, large actuator-stroke (woofer) mirror. The woofer-tweeter combination allows for …