Controls and Control Theory Commons^™

Evaluating Eeg–Emg Fusion-Based Classification As A Method For Improving Control Of Wearable Robotic Devices For Upper-Limb Rehabilitation, Jacob G. Tryon

Electronic Thesis and Dissertation Repository

Musculoskeletal disorders are the biggest cause of disability worldwide, and wearable mechatronic rehabilitation devices have been proposed for treatment. However, before widespread adoption, improvements in user control and system adaptability are required. User intention should be detected intuitively, and user-induced changes in system dynamics should be unobtrusively identified and corrected. Developments often focus on model-dependent nonlinear control theory, which is challenging to implement for wearable devices.

One alternative is to incorporate bioelectrical signal-based machine learning into the system, allowing for simpler controller designs to be augmented by supplemental brain (electroencephalography/EEG) and muscle (electromyography/EMG) information. To extract user intention better, sensor …

Tank Level Controller Plc Lab, Siddhi Upadhyaya, Teghvir Grewal

Electrical Engineering

The California Polytechnic State University San Luis Obispo’s Electrical Engineering Department is currently developing lab experiments for the new EE435 (Industrial Power Control and Automation) class. In order to support these efforts, fourth year Cal Poly students are expected to develop laboratory experiments that will be conducted during this new class for the semester system. The lab experiment focused on in this project is called the Tank Level Controller. This experiment will introduce EE 435 students to Schneider Electric Programmable Logic Controller (PLC) hardware and software, which is prominent in the automation industry.
This experiment will require students to develop …

Design And Fabrication Of A Force-Displacement Control Mechanism For Bone-Surgical Tool Testing, Kenneth Nwagu

Electronic Theses and Dissertations

This project focuses on the design and fabrication of an experimental setup for orthopedic-tool testing, tailored for a surgical instrumentation company. The multifaceted project encompasses a literature review, conceptual design, prototyping, and rigorous testing, resulting in a versatile control system capable of assessing various orthopedic tools, including bone drills, saws, burrs, and power handpieces.

Orthopedic surgical procedures (which include cutting and/or drilling into bone) often need to be performed on bones for faster recovery. The drilling and cutting process can cause an increase in temperature at the cutting site which can cause bone necrosis. The tools also need to be …

Smartphone Control Of Rc Cars, Weston R. Fitzgerald

Electrical Engineering

The smartphone-controlled RC (remote-controlled) car is an inexpensive remote-controlled car designed to be fast and portable. Instead of manufacturing, packaging, and shipping a separate controller, the remote control is implemented in a phone application, which saves time and money in both the design process and the manufacturing process. Utilizing the user’s smartphone is more cost-effective since mobile devices are a common recurrence, and packaging fewer devices results in overall better portability of the product.

This smartphone-controlled car is speedy and intuitive to learn for typical smartphone users. The user can change the car’s speed and direction wirelessly using their phone; …

Integration Of Blockchain Technology Into Automobiles To Prevent And Study The Causes Of Accidents, John Kim

Electronic Theses, Projects, and Dissertations

Automobile collisions occur daily. We now live in an information-driven world, one where technology is quickly evolving. Blockchain technology can change the automotive industry, the safety of the motoring public and its surrounding environment by incorporating this vast array of information. It can place safety and efficiency at the forefront to pedestrians, public establishments, and provide public agencies with pertinent information securely and efficiently. Other industries where Blockchain technology has been effective in are as follows: supply chain management, logistics, and banking. This paper reviews some statistical information regarding automobile collisions, Blockchain technology, Smart Contracts, Smart Cities; assesses the feasibility …

Dual-Axis Solar Tracker, Bryan Kennedy

All Undergraduate Projects

Renewable energies, and fuels that are not fossil fuel-based, are one of the prolific topics of debate in modern society. With climate change now becoming a primary focus for scientists and innovators of today, one of the areas for the largest amount of potential and growth is that of the capturing and utilization of Solar Energy. This method involves using a mechanical system to track the progression of the sun as it traverses the sky throughout the day. A dual-axis solar tracker such as the one designed and built for this project, can follow the sun both azimuthally and in …

An Exact Analysis For Four-Order Acousto-Optic Bragg Diffraction Which Incorporates Both Incident Light Angle And Sound Frequency Dependencies, Adeyinka Sunday Ademola

Electrical Engineering Theses

This thesis extends the prior work which produced an exact solution to the four-order acousto-optic (AO) Bragg cell with assumed fixed center frequency and with exact Bragg angle incident light. The extension predicts the model that incorporates the dependencies of both the input angle of light and the sound frequency. Specifically, a generalized 4^th order linear differential equation (DE), is developed from a simultaneous analysis of four coupled AO system of DEs. Through standard methods, the characteristic roots, which requires solving a quartic equation, is produced. Subsequently, a derived system of homogeneous solutions, which absorbs the roots obtained using …

Development Of Instrumentation And Control Systems For An Integral Large Scale Pressurized Water Reactor, Matthew Rowland Morrow Lish

Doctoral Dissertations

Small and large scale integral light water reactors are being developed to supply electrical power and to meet the needs of process heat, primarily for water desalination. This dissertation research focuses on the instrumentation and control of a large integral inherently safe light water reactor (designated as I²S-LWR) which is being designed as part of a grant by the U.S. Department of Energy Integrated Research Project (IRP). This 969 MWe integral pressurized water reactor (PWR) incorporates as many passive safety features as possible while maintaining competitive costs with current light water reactors. In support of this work, the …

Developing And Testing An Anguilliform Robot Swimming With Theoretically High Hydrodynamic Efficiency, John B. Potts Iii

University of New Orleans Theses and Dissertations

An anguilliform swimming robot replicating an idealized motion is a complex marine vehicle necessitating both a theoretical and experimental analysis to completely understand its propulsion characteristics. The ideal anguilliform motion within is theorized to produce ``wakeless'' swimming (Vorus, 2011), a reactive swimming technique that produces thrust by accelerations of the added mass in the vicinity of the body. The net circulation for the unsteady motion is theorized to be eliminated.

The robot was designed to replicate the desired, theoretical motion by applying control theory methods. Independent joint control was used due to hardware limitations. The fluid velocity vectors in the …

Electromechanics Of An Ocean Current Turbine, Vasileios Tzelepis

University of New Orleans Theses and Dissertations

The development of a numeric simulation for predicting the performance of an Ocean Current Energy Conversion System is presented in this thesis along with a control system development using a PID controller for the achievement of specified rotational velocity set-points. In the beginning, this numeric model is implemented in MATLAB/Simulink® and it is used to predict the performance of a three phase squirrel single-cage type induction motor/generator in two different cases. The first case is a small 3 meter rotor diameter, 20 kW ocean current turbine with fixed pitch blades, and the second case a 20 …

Interpreting, Stephanie Jo Kent

Doctoral Dissertations

What do community interpreting for the Deaf in western societies, conference interpreting for the European Parliament, and language brokering in international management have in common? Academic research and professional training have historically emphasized the linguistic and cognitive challenges of interpreting, neglecting or ignoring the social aspects that structure communication. All forms of interpreting are inherently social; they involve relationships among at least three people and two languages. The contexts explored here, American Sign Language/English interpreting and spoken language interpreting within the European Parliament, show that simultaneous interpreting involves attitudes, norms and values about intercultural communication that overemphasize information and discount …

Neuromodulation Based Control Of Autonomous Robots On A Cloud Computing Platform, Cameron Muhammad

Electronic Theses and Dissertations

In recent years, the advancement of neurobiologically plausible models and computer networking has resulted in new ways of implementing control systems on robotic platforms. The work presents a control approach based on vertebrate neuromodulation and its implementation on autonomous robots in the open-source, open-access environment of robot operating system (ROS). A spiking neural network (SNN) is used to model the neuromodulatory function for generating context based behavioral responses of the robots to sensory input signals. The neural network incorporates three types of neurons- cholinergic and noradrenergic (ACh/NE) neurons for attention focusing and action selection, dopaminergic (DA) neurons for rewards- and …

The Modeling, Analysis And Control Of Resilient Manufacturing Enterprises, Yao Hu

Theses and Dissertations--Electrical and Computer Engineering

The resilience of manufacturing enterprises is an important research topic, since disruptions have severe effects on the normal operation of manufacturing enterprises, especially as manufacturing supply chains become global. Although many case studies have been carried out to address resilience in organizations, a systematic method to model and analyze the resilience dynamics in manufacturing enterprises is not well developed. This study is intended to conduct research on quantitative analysis and control for resilience.

After reviewing the literature addressing resilience, a modeling framework is presented to characterize the resilience of a manufacturing enterprise responding to disruptive events, which includes inventory ow …

Multi-Modular Integral Pressurized Water Reactor Control And Operational Reconfiguration For A Flow Control Loop, Sergio Ricardo Pereira Perillo

Doctoral Dissertations

This dissertation focused on the IRIS design since this will likely be one of the designs of choice for future deployment in the U.S and developing countries. With a net 335 MWe output IRIS novel design falls in the “medium” size category and it is a potential candidate for the so called modular reactors, which may be appropriate for base load electricity generation, especially in regions with smaller electricity grids, but especially well suited for more specialized non-electrical energy applications such as district heating and process steam for desalination. The first objective of this dissertation is to evaluate and quantify …

Guidelines For Deploying Wireless Sensor Network In Manufacturing: Star Topology Study Using The Rssi To Test The Network Performance, A. Hameed Madwar

Dissertations and Theses @ UNI

Wireless Sensor Networks (WSNs) are varying in kinds and can be used for many purposes. It can be extensively used in monitoring, reporting, and decision routines. Therefore, WSNs are very important to integrate with manufacturing since they can help not only in monitoring and decision making but also they can increase productivity and decrease the wiring costs. However, WSNs are facing some challenges in manufacturing as they need to resist the interferences that could be generated by the electrical and mechanical fields created during the manufacturing processes. Some of these interferences could be due to the high temperatures, blocks of …

An Investigation Into Manufacturing Execution Systems, K. W. Duley

Theses : Honours

Hardware and software developments of this decade have exposed an hiatus between business/management applications and process control in heavy industry in the implementation of computer technology. This document examines the development of discrete manufacturing and of relevant implementations of computing. It seeks to examine and to clarify the issues involved in a perceived current drive to bridge this gap, to integrate all the systems in a manufacturing enterprise in a Manufacturing Execution System (MES) in order to address two hypotheses: I) That overseas trends towards the development of manufacturing execution systems have application in the Australian industrial context. 2) That …