Controls and Control Theory Commons^™

Z-Source Inverter For Automotive Applications, Omar Ellabban, Joeri Van Mierlo

Omar Ellabban

No abstract provided.

Capacitor Voltage Control Techniques Of The Z-Source Inverter: A Comparative Study, Omar Ellabban, Joeri Van Mierlo, Philippe Lataire

Omar Ellabban

The Z-source inverter (ZSI) is a recently proposed single-stage power conversion topology. It adds voltage boost capability for complementing the usual voltage buck operation of a traditional voltage source inverter (VSI) with improved reliability. In this paper, a single-loop and dual-loop capacitor voltage control techniques for the ZSI are digitally designed based on a third order small signal model of the ZSI, implemented using a digital signal processor (DSP) and compared. Simulation and experimental results of a 30 kW ZSI during input voltage changes, load disturbances and steady state operations are presented and compared. The results show that the dual-loop …

Smart Wall Plug Design For The Dc House Project, Edward Constant Sibal

Master's Theses

The DC House project at Cal Poly State University faces a challenge of supplying DC voltage to household appliances. Each appliance in the DC House constitutes a DC load that has a unique voltage and power rating, hence the need to develop a smart DC wall plug that will automatically adjust to the operating voltage required by any DC load. This thesis entails a proof of concept design of the smart DC wall plug which can automatically detect an appliance’s voltage rating. The design employs a dc-dc converter in conjunction with a microcontroller to sense load current to properly adjust …

A Simple Distributed Method For Control Over Wireless Networks, Miroslav Pajic, Shreyas Sundaram, George Pappas, Rahul Mangharam

Rahul Mangharam

We present a distributed scheme used for control over wireless networks. In our previous work, we introduced the concept of a Wireless Control Network (WCN), where the network itself, with no centralized node, acts as the controller. In this work, we show how the WCN can be modified to include observer style updates which substantially improves robustness of the closed-loop system to link failures. In addition, we analyze how the WCN simplifies extraction of the communication and computation schedules and enables system compositionality and scalability.

The Wireless Control Network: A New Approach For Control Over Networks, Miroslav Pajic, Shreyas Sundaram, George Pappas, Rahul Mangharam

Rahul Mangharam

We present a method to stabilize a plant with a network of resource constrained wireless nodes. As opposed to traditional networked control schemes where the nodes simply route information to and from a dedicated controller (perhaps performing some encoding along the way), our approach treats the network itself as the controller. Specifically, we formulate a strategy for each node in the network to follow, where at each time-step, each node updates its internal state to be a linear combination of the states of the nodes in its neighborhood. We show that this causes the entire network to behave as a …

Closing The Loop: A Simple Distributed Method For Control Over Wireless Networks, Miroslav Pajic, Shreyas Sundaram, Jerome Le Ny, George J. Pappas, Rahul Mangharam

Rahul Mangharam

We present a distributed scheme used for control over a network of wireless nodes. As opposed to traditional networked control schemes where the nodes simply route information to and from a dedicated controller (perhaps performing some encoding along the way), our approach, Wireless Control Network (WCN), treats the network itself as the controller. In other words, the computation of the control law is done in a fully distributed way inside the network. We extend the basic WCN strategy, where at each time-step, each node updates its internal state to be a linear combination of the states of the nodes in …

Topological Conditions For Wireless Control Networks, Miroslav Pajic, Shreyas Sundaram, George J. Pappas, Rahul Mangharam

Rahul Mangharam

We study the problem of stabilizing a linear system over a wireless control network. We propose a scheme where each wireless node maintains a scalar state, and periodically updates it as a linear combination of neighboring plant outputs and node states. We make connections to decentralized fixed modes and structured system theory to provide conditions on the network topology that allow the system to be stabilized. Our analysis provides the minimal number of feedback edges that have to be introduced to stabilize the system over a network, and shows that as long as the network connectivity is larger than the …

Switch Yard Operation In Thermal Power Plant(Katpp Jhalawar Rajasthan), Radhey Shyam Meena Er.

Radhey Shyam Meena

Switchyard Provides the facilities for switching ,protection & Control of electric power. To handle high Voltage power with proper Safety measures. To isolate the noises coming from the grid with true 50Hz power SWITCH YARD IS IMPORTANT PART IN THERMAL PLANT. IN KALISINDH THERMAL 400KV AND 220KV SWITCH YARD LOCATED.

Monitoring And Regression Based Modelling Of End Winding Vibration In Large Synchronous Generators., David Shally

Masters

This research project was set up to monitor, on an ongoing basis, the condition of the end windings and their support structures of a 288 MVA 2-pole synchronous generator with a known end winding vibration problem Excessive vibration at the end windings was caused by the natural frequencies of individual end bars (local) and of the entire end winding structure (global) being at or close to the magnetic forcing frequency of 100 Hz. Resonant vibration such as this has been a cause of major failures in machines of the same type in the past, resulting in significant down time ranging …

Topological Conditions For Wireless Control Networks, Miroslav Pajic, Shreyas Sundaram, George J. Pappas, Rahul Mangharam

George J. Pappas

We study the problem of stabilizing a linear system over a wireless control network. We propose a scheme where each wireless node maintains a scalar state, and periodically updates it as a linear combination of neighboring plant outputs and node states. We make connections to decentralized fixed modes and structured system theory to provide conditions on the network topology that allow the system to be stabilized. Our analysis provides the minimal number of feedback edges that have to be introduced to stabilize the system over a network, and shows that as long as the network connectivity is larger than the …

A Simple Distributed Method For Control Over Wireless Networks, Miroslav Pajic, Shreyas Sundaram, George Pappas, Rahul Mangharam

George J. Pappas

We present a distributed scheme used for control over wireless networks. In our previous work, we introduced the concept of a Wireless Control Network (WCN), where the network itself, with no centralized node, acts as the controller. In this work, we show how the WCN can be modified to include observer style updates which substantially improves robustness of the closed-loop system to link failures. In addition, we analyze how the WCN simplifies extraction of the communication and computation schedules and enables system compositionality and scalability.

The Wireless Control Network: A New Approach For Control Over Networks, Miroslav Pajic, Shreyas Sundaram, George Pappas, Rahul Mangharam

George J. Pappas

We present a method to stabilize a plant with a network of resource constrained wireless nodes. As opposed to traditional networked control schemes where the nodes simply route information to and from a dedicated controller (perhaps performing some encoding along the way), our approach treats the network itself as the controller. Specifically, we formulate a strategy for each node in the network to follow, where at each time-step, each node updates its internal state to be a linear combination of the states of the nodes in its neighborhood. We show that this causes the entire network to behave as a …

Topological Conditions For Wireless Control Networks, Miroslav Pajic, Shreyas Sundaram, George J. Pappas, Rahul Mangharam

George J. Pappas

We study the problem of stabilizing a linear system over a wireless control network. We propose a scheme where each wireless node maintains a scalar state, and periodically updates it as a linear combination of neighboring plant outputs and node states. We make connections to decentralized fixed modes and structured system theory to provide conditions on the network topology that allow the system to be stabilized. Our analysis provides the minimal number of feedback edges that have to be introduced to stabilize the system over a network, and shows that as long as the network connectivity is larger than the …

A Simple Distributed Method For Control Over Wireless Networks, Miroslav Pajic, Shreyas Sundaram, George Pappas, Rahul Mangharam

George J. Pappas

We present a distributed scheme used for control over wireless networks. In our previous work, we introduced the concept of a Wireless Control Network (WCN), where the network itself, with no centralized node, acts as the controller. In this work, we show how the WCN can be modified to include observer style updates which substantially improves robustness of the closed-loop system to link failures. In addition, we analyze how the WCN simplifies extraction of the communication and computation schedules and enables system compositionality and scalability.

The Wireless Control Network: A New Approach For Control Over Networks, Miroslav Pajic, Shreyas Sundaram, George Pappas, Rahul Mangharam

George J. Pappas

We present a method to stabilize a plant with a network of resource constrained wireless nodes. As opposed to traditional networked control schemes where the nodes simply route information to and from a dedicated controller (perhaps performing some encoding along the way), our approach treats the network itself as the controller. Specifically, we formulate a strategy for each node in the network to follow, where at each time-step, each node updates its internal state to be a linear combination of the states of the nodes in its neighborhood. We show that this causes the entire network to behave as a …

Topological Conditions For Wireless Control Networks, Miroslav Pajic, Shreyas Sundaram, George J. Pappas, Rahul Mangharam

George J. Pappas

We study the problem of stabilizing a linear system over a wireless control network. We propose a scheme where each wireless node maintains a scalar state, and periodically updates it as a linear combination of neighboring plant outputs and node states. We make connections to decentralized fixed modes and structured system theory to provide conditions on the network topology that allow the system to be stabilized. Our analysis provides the minimal number of feedback edges that have to be introduced to stabilize the system over a network, and shows that as long as the network connectivity is larger than the …

A Simple Distributed Method For Control Over Wireless Networks, Miroslav Pajic, Shreyas Sundaram, George Pappas, Rahul Mangharam

George J. Pappas

We present a distributed scheme used for control over wireless networks. In our previous work, we introduced the concept of a Wireless Control Network (WCN), where the network itself, with no centralized node, acts as the controller. In this work, we show how the WCN can be modified to include observer style updates which substantially improves robustness of the closed-loop system to link failures. In addition, we analyze how the WCN simplifies extraction of the communication and computation schedules and enables system compositionality and scalability.

The Wireless Control Network: A New Approach For Control Over Networks, Miroslav Pajic, Shreyas Sundaram, George Pappas, Rahul Mangharam

George J. Pappas

We present a method to stabilize a plant with a network of resource constrained wireless nodes. As opposed to traditional networked control schemes where the nodes simply route information to and from a dedicated controller (perhaps performing some encoding along the way), our approach treats the network itself as the controller. Specifically, we formulate a strategy for each node in the network to follow, where at each time-step, each node updates its internal state to be a linear combination of the states of the nodes in its neighborhood. We show that this causes the entire network to behave as a …

Dynamic Modeling Of Solid Oxide Fuel Cell Stack Based On Local Linear Model Tree Algorithm, Hesamoddin Marzooghi, M. Raoofat, M. Dehghani, G. H. Elahi

Hesamoddin Marzooghi

This paper presents a dynamic model for Solid Oxide Fuel Cell (SOFC) stack using Local Linear Model Tree (LOLIMOT) algorithm which is useful for both dynamic and steady-state studies. Most of conventional SOFC models require a large number of parameters and factors, which are difficult to be determined or estimated. In this paper, a LOLIMOT-based model, which does not require the parameters of fuel cell, is proposed for each operation mode of SOFC. In these models, decision tree-based feature selection approach is exploited to select inputs of the LOLIMOT. The proposed models are trained in a short time and they …

Polar Field Oriented Control With 3rd Harmonic Injection, Martin Todd Hess

Master's Theses

Abstract

POLAR FIELD-ORIENTED CONTROL

with

3^RD HARMONIC INJECTION

Martin Todd Hess

Field Oriented Control (FOC), also known as vector control, is a widely used and well documented method for controlling Permanent-Magnet Synchronous Motors (PMSM) and induction motors. Almost invariably the orientation of the stator and rotor (field) fluxes are described in rectangular coordinates. In this thesis we explore the practicality of using polar coordinates.

Third harmonic injection is also a well-known technique that allows full utilization of the bus (DC-link), thus allowing the motor to run to full base speed without the use of field weakening. This technique potentially …

Modeling And Simulation Of Z-Source Inverter, Suresh L

suresh L

Z – source inverters have been recently proposed as an alternative power conversion concept as they have both voltage buck and boost capabilities. These inverters use a unique impedance network, coupled between the power source and converter circuit, to provide both voltage buck and boost properties, which cannot be achieved with conventional voltage source and current source inverters. To facilitate understanding of Z – source inverter, this paper presents a detailed analysis, showing design of impedance network, implementation of simple Boost control PWM technique and simulation of Z – source inverter for different values of modulation indices.