Computer Engineering Commons^™

Modeling, Simulation And Control Of Microrobots For The Microfactory., Zhong Yang

Electronic Theses and Dissertations

Future assembly technologies will involve higher levels of automation in order to satisfy increased microscale or nanoscale precision requirements. Traditionally, assembly using a top-down robotic approach has been well-studied and applied to the microelectronics and MEMS industries, but less so in nanotechnology. With the boom of nanotechnology since the 1990s, newly designed products with new materials, coatings, and nanoparticles are gradually entering everyone’s lives, while the industry has grown into a billion-dollar volume worldwide. Traditionally, nanotechnology products are assembled using bottom-up methods, such as self-assembly, rather than top-down robotic assembly. This is due to considerations of volume handling of large …

A Structured Narrative Prompt For Prompting Narratives From Large Language Models: Sentiment Assessment Of Chatgpt-Generated Narratives And Real Tweets, Christopher J. Lynch, Erik J. Jensen, Virginia Zamponi, Kevin O'Brien, Erika Frydenlund, Ross Gore

VMASC Publications

Large language models (LLMs) excel in providing natural language responses that sound authoritative, reflect knowledge of the context area, and can present from a range of varied perspectives. Agent-based models and simulations consist of simulated agents that interact within a simulated environment to explore societal, social, and ethical, among other, problems. Simulated agents generate large volumes of data and discerning useful and relevant content is an onerous task. LLMs can help in communicating agents' perspectives on key life events by providing natural language narratives. However, these narratives should be factual, transparent, and reproducible. Therefore, we present a structured narrative prompt …

Assessment Of Simulated And Real-World Autonomy Performance With Small-Scale Unmanned Ground Vehicles, William Peyton Johnson

Theses and Dissertations

Off-road autonomy is a challenging topic that requires robust systems to both understand and navigate complex environments. While on-road autonomy has seen a major expansion in recent years in the consumer space, off-road systems are mostly relegated to niche applications. However, these applications can provide safety and navigation to dangerous areas that are the most suited for autonomy tasks. Traversability analysis is at the core of many of the algorithms employed in these topics. In this thesis, a Clearpath Robotics Jackal vehicle is equipped with a 3D Ouster laser scanner to define and traverse off-road environments. The Mississippi State University …

A Monte Carlo Framework For Incremental Improvement Of Simulation Fidelity, Damian M. Lyons, James Finocchiaro, Misha Novitzky, Chris Korpela

Faculty Publications

Robot software developed in simulation often does not be- have as expected when deployed because the simulation does not sufficiently represent reality - this is sometimes called the `reality gap' problem. We propose a novel algorithm to address the reality gap by injecting real-world experience into the simulation. It is assumed that the robot program (control policy) is developed using simulation, but subsequently deployed on a real system, and that the program includes a performance objective monitor procedure with scalar output. The proposed approach collects simulation and real world observations and builds conditional probability functions. These are used to generate …

A Monte Carlo Framework For Incremental Improvement Of Simulation Fidelity, Damian Lyons, James Finocchiaro, Misha Novitsky, Chris Korpela

Faculty Publications

Robot software developed in simulation often does not be- have as expected when deployed because the simulation does not sufficiently represent reality - this is sometimes called the `reality gap' problem. We propose a novel algorithm to address the reality gap by injecting real-world experience into the simulation. It is assumed that the robot program (control policy) is developed using simulation, but subsequently deployed on a real system, and that the program includes a performance objective monitor procedure with scalar output. The proposed approach collects simulation and real world observations and builds conditional probability functions. These are used to generate …

Therapeutic Mechanical Horse, Cade M. Liberty, Aleya Dolorfino, Peter Philips, Zuzanna Dominik, Luke Watts

Mechanical Engineering

Jack's Helping Hand and its hippotherapy participants required a device to serve as an alternative to a live horseback riding experience that could also increase the range of riders. This would provide more clients with equine-assisted therapy that has proven to better the lives of people with both physical and mental disabilities. Horses can be unpredictable, tall, and sometimes anxiety-inducing, especially for new riders. Our group’s aim was to develop a mechanical horse that will be able to reduce these issues for equine therapy centers and the riders they help. When a rider gets to practice sitting on the horse …

Off Road Autonomous Vehicle Modeling And Repeatability Using Real World Telemetry Via Simulation, Matthew Paul Spencer

Dissertations, Master's Theses and Master's Reports

One approach to autonomous control of high mobility ground vehicle platforms operating on challenging terrain is with the use of predictive simulation. Using a simulated or virtual world, an autonomous system can optimize use of its control systems by predicting interaction between the vehicle and ground as well as the vehicle actuator state. Such a simulation allows the platform to assess multiple possible scenarios before attempting to execute a path. Physically realistic simulations covering all of these domains are currently computationally expensive, and are unable to provide fast execution times when assessing each individual scenario due to the use of …

Modeling Of Complex Parts For Industrial Waterjet Cleaning, Braden James

Graduate Theses and Dissertations

Industrial high-pressure waterjet cleaning is common to many industries. The modeling in this paper functions inside a collaborative robotic framework for high mix, low volume processes where human robot collaboration is beneficial. Automation of pressure washing is desirable for economic and ergonomic reasons. An automated cleaning system needs path simulation and analysis to give the operator insight into the predicted cleaning performance of the system. In this paper, ablation, the removal of a substrate coating by waterjet, is modeled for robotic cleaning operations. The model is designed to work with complex parts often found in spray cleaning operations, namely parts …

A Scalable, Chunk-Based Slicer For Cooperative 3d Printing, Jace J. Mcpherson

Computer Science and Computer Engineering Undergraduate Honors Theses

Cooperative 3D printing is an emerging technology that aims to increase the 3D printing speed and to overcome the size limit of the printable object by having multiple mobile 3D printers (printhead-carrying mobile robots) work together on a single print job on a factory floor. It differs from traditional layer-by-layer 3D printing due to requiring multiple mobile printers to work simultaneously without interfering with each other. Therefore, a new approach for slicing a digital model and generating commands for the mobile printers is needed, which has not been discussed in literature before. We propose a chunk-by-chunk based slicer that divides …

System Identification Of A Circulation Control Unmanned Aerial Vehicle, Mohammed Agha

Electronic Theses and Dissertations

The advancement in automation and sensory systems in recent years has led to an increase the demand of UAV missions. Due to this increase in demand, the research community has gained interest in investigating UAV performance enhancing systems. Circulation Control (CC), which is an active control flow method used to enhance UAV lift, is a performance enhancing system currently studied. In prior research, experimental studies have shown that Circulation Control wings (CCW) implemented on class-I UAVs can reduce take-off distance by 54%. Wind tunnel tests reveal that CC improves aircraft payload capabilities through lift enhancement. Increasing aircraft payload capabilities causes …

A Simulation-Based Layered Framework Framework For The Development Of Collaborative Autonomous Systems, Ioannis Sakiotis

Computational Modeling & Simulation Engineering Theses & Dissertations

The purpose of this thesis is to introduce a simulation-based software framework that facilitates the development of collaborative autonomous systems. Significant commonalities exist in the design approaches of both collaborative and autonomous systems, mirroring the sense, plan, act paradigm, and mostly adopting layered architectures. Unfortunately, the development of such systems is intricate and requires low-level interfacing which significantly detracts from development time. Frameworks for the development of collaborative and autonomous systems have been developed but are not flexible and center on narrow ranges of applications and platforms. The proposed framework utilizes an expandable layered structure that allows developers to define …

Formal Specification And Refinement Of The Navigation Tasks Of Autonomous Robots, Eman Rabiah Rabiah

Theses

Autonomous robots are hybrid systems whose role in our daily life is becoming increasingly critical. They are tasked with various activities requiring reliability, safety, and correctness of their software-controlled behavior. Formal methods have been proved effective in addressing development issues associated with these software qualities. However, even though autonomous robot navigation is a primordial function, there is no research dealing with enhancing reliability of the navigation algorithms. Thus, our focus is to investigate this type of algorithms, and specifically path planning, a fundamental and critical functionality supporting autonomy. We formally address the issue of enhancing reliability of the widely-used A* …

An Embodied Approach To Evolving Robust Visual Classifiers, Karol Zieba

Graduate College Dissertations and Theses

From the very creation of the term by Czech writer Karel Capek in 1921, a "robot" has been synonymous with an artificial agent possessing a powerful body and cogitating mind. While the fields of Artificial Intelligence (AI) and Robotics have made progress into the creation of such an android, the goal of a cogitating robot remains firmly outside the reach of our technological capabilities. Cognition has proved to be far more complex than early AI practitioners envisioned. Current methods in Machine Learning have achieved remarkable successes in image categorization through the use of deep learning. However, when presented with novel …

A Relaxed Fusion Of Information From Real And Synthetic Images To Predict Complex Behavior, Damian M. Lyons, D. Paul Benjamin

Faculty Publications

An important component of cognitive robotics is the ability to mentally simulate physical processes and to compare the expected results with the information reported by a robot's sensors. In previous work, we have proposed an approach that integrates a 3D game-engine simulation into the robot control architecture. A key part of that architecture is the Match-Mediated Difference (MMD) operation, an approach to fusing sensory data and synthetic predictions at the image level. The MMD operation insists that simulated and predicted scenes are similar in terms of the appearance of the objects in the scene. This is an overly restrictive constraint …

Asymmetric Passive Dynamic Walker Used To Examine Gait Rehabilitation Methods, John Sushko

USF Tampa Graduate Theses and Dissertations

Testing gait rehabilitation devices on humans can be a difficult task, due to the effects of the neurological controls of the human body. This thesis advances the use of a passive dynamic walker (PDW) tuned to have asymmetric gait patterns similar to those with physical impairments to test rehabilitation devices. A passive dynamic walker is a multipendulum system that has a stable gait pattern when walking down a slope without any energy inputs except the forces due to gravity. A PDW model is better suited for testing rehabilitation devices because it has been shown to resemble human gait and separates …

Integrating Perception And Problem Solving To Predict Complex Object Behaviors, Damian M. Lyons, Sirhan Chaudhry, Marius Agica, John Vincent Monaco

Faculty Publications

One of the objectives of Cognitive Robotics is to construct robot systems that can be directed to achieve realworld goals by high-level directions rather than complex, low-level robot programming. Such a system must have the ability to represent, problem-solve and learn about its environment as well as communicate with other agents. In previous work, we have proposed ADAPT, a Cognitive Architecture that views perception as top-down and goaloriented and part of the problem solving process.

Our approach is linked to a SOAR-based problem-solving and learning framework. In this paper, we present an architecture for the perceptive and world modelling components …