Computer Engineering Commons^™

Real Time And High Fidelity Quadcopter Tracking System, Tyler Mckay Hall

Computer Engineering

This project was conceived as a desired to have an affordable, flexible and physically compact tracking system for high accuracy spatial and orientation tracking. Specifically, this implementation is focused on providing a low cost motion capture system for future research. It is a tool to enable the further creation of systems that would require the use of accurate placement of landing pads, payload acquires and delivery. This system will provide the quadcopter platform a coordinate system that can be used in addition to GPS.

Field research with quadcopter manufacturers, photographers, agriculture and research organizations were contact and interviewed for information …

Magneto-Electric Approximate Computational Framework For Bayesian Inference, Sourabh Kulkarni

Masters Theses

Probabilistic graphical models like Bayesian Networks (BNs) are powerful artificial-intelligence formalisms, with similarities to cognition and higher order reasoning in the human brain. These models have been, to great success, applied to several challenging real-world applications. Use of these formalisms to a greater set of applications is impeded by the limitations of the currently used software-based implementations. New emerging-technology based circuit paradigms which leverage physical equivalence, i.e., operating directly on probabilities vs. introducing layers of abstraction, promise orders of magnitude increase in performance and efficiency of BN implementations, enabling networks with millions of random variables. While majority of applications with …

Multiple Camera Control Using An Octaplexer In A 5.8 Ghz Video System, Uciel Garcia Olmedo, Skylar Tamke

2017 Academic High Altitude Conference

One of the greatest challenges with camera systems on High-Altitude Balloons (HAB) is to control the direction that they point. This is because the payload boxes constantly rotate during the flight. While mechanical gambles are normally used, an electronic gambled was designed using multiple cameras and a series of multiplexers. The design consists of 8 version 1 pi cameras, connected through a series of multiplexers and interfacing with an IMU to tell the direction the cameras are facing. This design attaches to the Raspberry Pi through the GPIO pins. The multiplexers turn on the camera facing the orientation desired and …

University Of Maine High Altitude Ballooning Eclipse Experience, Kent Seneres, Derek Haas, William Bessette, Richard Eason

2017 Academic High Altitude Conference

The University of Maine High Altitude Ballooning (UMHAB) team launched two balloons during the August 21, 2017 total solar eclipse, producing a consistent online video stream of the eclipse to an altitude of 110,000 feet. This paper discusses the key factors that lead to a successful launch and recovery, such as thorough testing procedures, redesign of components, choice of launch site, and a touch of luck. In preparation for the event, the team tested the equipment and code over eleven balloon launches. Airplane based testing and land testing were conducted for the tracking and video stream components. The payloads and …

Answering Food Insecurity: Serving The Community With Food And Knowledge Using Technology, Courtney Simpson

Purdue Journal of Service-Learning and International Engagement

The courses of Tech120, CGT110, and ENGT 180/181 and Red Gold at Purdue collaborated to design a robot that would plant and water a garden for a local community charter school. The students centered the project on the users’ needs for fresh food, nutrition education, and early exposure to STEM for children. The school, Anderson Preparatory Academy (APA), is comprised of many children who come from low-income families and are in the free or reduced lunch program. Inspired from “Farm Bot,” a similar system that allows for almost hands-free gardening, the “Boiler Bot” is designed to be scalable so children …

Event And Time-Triggered Control Module Layers For Individual Robot Control Architectures Of Unmanned Agricultural Ground Vehicles, Tyler Troyer

Department of Agricultural and Biological Systems Engineering: Dissertations, Theses, and Student Research

Automation in the agriculture sector has increased to an extent where the accompanying methods for unmanned field management are becoming more economically viable. This manifests in the industry’s recent presentation of conceptual cab-less machines that perform all field operations under the high-level task control of a single remote operator. A dramatic change in the overall workflow for field tasks that historically assumed the presence of a human in the immediate vicinity of the work is predicted. This shift in the entire approach to farm machinery work provides producers increased control and productivity over high-level tasks and less distraction from operating …

Parallel Computation Using Mems Oscillator-Based Computing System, Xinrui Wang, Ilias Bilionis, Salar Safarkhani

The Summer Undergraduate Research Fellowship (SURF) Symposium

In recent years, parallel computing systems such as artificial neural networks (ANNs) have been of great interest. In these systems which emulate the behavior of human brains, the processing is carried out simultaneously. However, it is still a challenging engineering problem to design highly efficient hardware for parallel computing systems. We will study the properties of networks of Microelectromechanical System (MEMS) oscillators to explore their capabilities as parallel computing infrastructure. Furthermore, we simulate the time-variant states of MEMS oscillators network under various initial conditions and performance of certain tasks. Recent theoretical results show that networks of MEMS oscillators have some …

Scalable High-Speed Communications For Neuromorphic Systems, Aaron Reed Young

Masters Theses

Field-programmable gate arrays (FPGA), application-specific integrated circuits (ASIC), and other chip/multi-chip level implementations can be used to implement Dynamic Adaptive Neural Network Arrays (DANNA). In some applications, DANNA interfaces with a traditional computing system to provide neural network configuration information, provide network input, process network outputs, and monitor the state of the network. The present host-to-DANNA network communication setup uses a Cypress USB 3.0 peripheral controller (FX3) to enable host-to-array communication over USB 3.0. This communications setup has to run commands in batches and does not have enough bandwidth to meet the maximum throughput requirements of the DANNA device, resulting …

Introduction To Signal Timing & Traffic Control, Sarah V. Hernandez, Mariah Crew, Karla Diaz-Corro, Taslima Akter

Civil Engineering Teaching and Learning

The purpose of these lesson plans is to introduce students to traffic signalization basics. Students will be lead through a series of mini-lectures on traffic control and signalization including a discussion on the limitations and benefits of traffic signalization. The lesson plans compliment a computer simulation “game” in which students act as manual operators for a single up to four by four gridded intersection. Students attempt to control the progression of signals to understand the relationship between signal timing and user delay. Through experimentation with the simulation, students generate a presentation discussing the benefits and drawbacks of signal timing and …

One-To-Cloud One-Time Pad Data Encryption: Introducing Virtual Prototyping With Pspice, Paul Tobin, Lee Tobin, Roberto Gandia Blanquer Dr, Michael Mckeever, Jonathan Blackledge

Conference papers

In this paper, we examine the design and application of a one-time pad encryption system for protecting data stored in the Cloud. Personalising security using a one-time pad generator at the client-end protects data from break-ins, side-channel attacks and backdoors in public encryption algorithms. The one-time pad binary sequences were obtained from modified analogue chaos oscillators initiated by noise and encoded client data locally. Specific ``one-to-Cloud'' storage applications returned control back to the end user but without the key distribution problem normally associated with one-time pad encryption. Development of the prototype was aided by ``Virtual Prototyping'' in the latest version …

Skin Tone Tracking Device (Chromaband), Ziyang Bian

Computer Engineering

It’s long been said that your skin is a window into your health and with many illnesses the first signs of trouble actually show up in your skin. So if we have this natural warning system, then why isn’t anyone able to effectively use it to predict changes in our health? The problem is that currently there is no reliable way to accurately measure the change in skin tone and how these changes may or may not change with variations in health. This project’s aim is to design and develop a device that will record the changes in a user’s …

Blend It Wine Blending Distribution System, Connor Clarry, Russell Temple, Matt Moren

Mechanical Engineering

No abstract provided.

Daily Dose, Ken H. Yasui, Joey M. Angeja

Computer Engineering

The project goal is to develop a medication and vitamin management device that will sort and dispense pre-configured amounts of pills at designated times . The main clientele of this device is the elderly community with a secondary client base of the general public. The entire system is designed from scratch, powered by US standard line voltage. The main functionalities of the device are the ability to store multiple types of pills and the ability to accurately handle user input and data transfer. The two engineering specifications that were not met included the desired pill pick up rate and dimensions …

Joe On The Go, Nico Ledwith, Grayson Meurrens

Computer Engineering

The ultimate goal for this project is to design an automatic, large capacity coffee maker. The system should be able to detect when a cup or mug is in position to receive coffee, then dispense a cup’s worth (~ 8oz) of coffee. When the coffee in the urn is getting low, our system should be able to allow a person to put new coffee grounds in the top, then push a button to start the coffee brewing process. More specifically, we had to accomplish the following tasks in order to meet our goals: solving the issue of transporting water from …

Smartgarden, Samuel S. Lees, Matthew T. Lindly

Computer Engineering

The problem that the SmartGarden project seeks to solve is the challenge of watering succulents correctly and maintaining consistent plant health. Too much water can cause root rot and drowning while too little water can cause dehydration and starvation.
The SmartGarden solves this common problem by configuring a Raspberry Pi to measure soil moisture, store the data to an AWS server in the cloud, and water the succulent when necessary, informing the user by providing both a web-interface and a variety of notifications.

Smartfarm, Nathan A. Oto, Caleb Fink

Computer Engineering

The overall expectation of this product is to create an autonomous Arduino library that accurately and robustly collects plant environment data from the Smart Farm board. The Smart Farm PCB is split into two primary functions: Data Acquisition(DAQ) and Power Control. Each function of the PCB is controlled by an Atmega 328P Microcontroller. The primary concern for this report is the functionality of the DAQ microcontroller.

Mr. Mix: The Automated Home Bartender, Brian Moore, Robert Hulbert

Computer Engineering

No abstract provided.

Micro-Spi Sediment Profile Imaging Micro-Inspector, Andrew P. Corvin, Caleb T. Davies, Matt R. Ferrari

Mechanical Engineering

This project was proposed by Dr. Brian Paavo through a desire to more easily study the benthic sediment layers of the ocean. To do so, he asked us to build a simple and compact machine for use in sediment profile imagery (SPI). Although devices like this already exist, they are all large scale devices that require a ship with a crane to deploy, which is expensive and time consuming. Instead, he desired a “micro” SPI, which is capable of being deployed from a small vessel that can easily navigate shallow waters. Our interpretation of these requirements was as follows: a …

Scan: Multi-Hop Calibration For Mobile Sensor Arrays, Balz Maag, Zimu Zhou, Olga Saukh, Lothar Thiele

Research Collection School Of Computing and Information Systems

Urban air pollution monitoring with mobile, portable, low-cost sensors has attracted increasing research interest for their wide spatial coverage and affordable expenses to the general public. However, low-cost air quality sensors not only drift over time but also suffer from cross-sensitivities and dependency on meteorological effects. Therefore calibration of measurements from low-cost sensors is indispensable to guarantee data accuracy and consistency to be fit for quantitative studies on air pollution. In this work we propose sensor array network calibration (SCAN), a multi-hop calibration technique for dependent low-cost sensors. SCAN is applicable to sets of co-located, heterogeneous sensors, known as sensor …

Demo: Deepmon - Building Mobile Gpu Deep Learning Models For Continuous Vision Applications, Loc Nguyen Huynh, Rajesh Krishna Balan, Youngki Lee

Research Collection School Of Computing and Information Systems

Deep learning has revolutionized vision sensing applications in terms of accuracy comparing to other techniques. Its breakthrough comes from the ability to extract complex high level features directly from sensor data. However, deep learning models are still yet to be natively supported on mobile devices due to high computational requirements. In this paper, we present DeepMon, a next generation of DeepSense [1] framework, to enable deep learning models on conventional mobile devices (e.g. Samsung Galaxy S7) for continuous vision sensing applications. Firstly, Deep-Mon exploits similarity between consecutive video frames for intermediate data caching within models to enhance inference latency. Secondly, …

Solid State Drive, Shaun A. Steele

Electrical Engineering

This project documents the design and implementation of a solid state drive (SSD). SSDs are a non-volatile memory storage device that competes with hard disk drives. SSDs rely on flash memory, a type of non-volatile memory that is electrically erased and programmed. The appeal of SSDs lies in the fact that they allow a fast, reliable, and durable memory storage device. The goal of this project is to have a working external SSD built from scratch.

Open Source Database And Website To Provide Free And Open Access To Inactive U.S. Patents In The Public Domain, Yuenyong Nilsiam, Joshua M. Pearce

Joshua M. Pearce

Although theoretically the patent system is meant to bolster innovation, the current United States Patent and Trademark Office (USPTO) is cumbersome and involves a significant time investment to locate inactive patents less than 20 years old. This article reports on the development of an open source database to find these public domain ideas. First, a search strategy is explained. Then the operation and use of free and open source software are detailed to meet the needs of open hardware innovators. Finally, a case study is presented to demonstrate the utility of the approach with 3-D printing. The results showed how …

Hardware Design Theory (Using Raspberry Pi), Anthony Kelly, Thomas Blum Dr.

Undergraduate Research

The concept for this research proposal is focused on achieving three main objectives:

1) To understand the logic and design behind the Raspberry Pi (RbP) mini-computer model, including: all hardware components and their functions, the capabilities [and limits] of the RbP, and the circuit engineering for these components.

2) To be able to, using the Python high-level language, duplicate, manipulate, and create RbP projects ranging from basic user-input and response systems to the theories behind more intricate and complicated observatory sensors.

3) Simultaneously, in order to combine a mutual shared interest of History and to blend in work done within …

Project Pradio, Trigg T. La Tour

Computer Science and Computer Engineering Undergraduate Honors Theses

This paper examines the design and manufacturing of a device that allows two or more users to share a wireless audio stream. Effectively, this allows a group of people to listen to the same audio in a synchronized manner. The product was unable to be completed in the allotted time. Regardless, significant progress was made and valuable insight into the circuit board design process was gained.

A Hybrid Partially Reconfigurable Overlay Supporting Just-In-Time Assembly Of Custom Accelerators On Fpgas, Zeyad Tariq Aklah

Graduate Theses and Dissertations

The state of the art in design and development flows for FPGAs are not sufficiently mature to allow programmers to implement their applications through traditional software development flows. The stipulation of synthesis as well as the requirement of background knowledge on the FPGAs' low-level physical hardware structure are major challenges that prevent programmers from using FPGAs. The reconfigurable computing community is seeking solutions to raise the level of design abstraction at which programmers must operate, and move the synthesis process out of the programmers' path through the use of overlays. A recent approach, Just-In-Time Assembly (JITA), was proposed that enables …

Eareeg Final Report, Tyler Stuessi, Jeremy Herwig, Dillon Hunneke, Evan Goble, Arthur Vidineyev

Chancellor’s Honors Program Projects

No abstract provided.

Automation In Entertainment: Concept, Design, And Application, Ryan Thally

Undergraduate Honors Theses

The focus of this thesis is to explore the automation technology used in the modern entertainment industry. Upon completion of my thesis, I will deliver a working prototype of the chosen technology and present its capabilities in a choreographed show.

Transportation Engineering: Traffic Control Simulator, Sarah V. Hernandez, Karla Diaz-Corro, Taslima Akter, Magdalena Asborno, Fu Durandal

Civil Engineering Teaching and Learning

The purpose of these lesson plans is to introduce students to traffic signalization basics. Students will be lead through a series of mini-lectures on traffic control and signalization including a discussion on the limitations and benefits of traffic signalization. The lesson plans compliment a computer simulation “game” in which students act as manual operators for a single up to four by four gridded intersection. Students attempt to control the progression of signals to understand the relationship between signal timing and user delay. Through experimentation with the simulation, students generate a presentation discussing the benefits and drawbacks of signal timing and …

Network-On-Chip Based H.264 Video Decoder On A Field Programmable Gate Array, Ian Barge

Master's Theses (2009 -)

This thesis develops the first fully network-on-chip (NoC) based h.264 video decoder implemented in real hardware on a field programmable gate array (FPGA). This thesis starts with an overview of the h.264 video coding standard and an introduction to the NoC communication paradigm. Following this, a series of processing elements (PEs) are developed which implement the component algorithms making up the h.264 video decoder. These PEs, described primarily in VHDL with some Verilog and C, are then mapped to an NoC which is generated using the CONNECT NoC generation tool. To demonstrate the scalability of the proposed NoC based design, …

A Novel Approach To Complex Human Activity Recognition, Md Osman Gani

Dissertations (1934 -)

Human activity recognition is a technology that offers automatic recognition of what a person is doing with respect to body motion and function. The main goal is to recognize a person's activity using different technologies such as cameras, motion sensors, location sensors, and time. Human activity recognition is important in many areas such as pervasive computing, artificial intelligence, human-computer interaction, health care, health outcomes, rehabilitation engineering, occupational science, and social sciences. There are numerous ubiquitous and pervasive computing systems where users' activities play an important role. The human activity carries a lot of information about the context and helps systems …