Computer Engineering Commons^™

Real-Time Audio-Midi Controller, Brian Shino Balberchak

Computer Engineering

Most MIDI controllers used in music production use a regular keyboard to generate the MIDI notes that are sent to the synthesizer. This project aims to provide the user with a different way of generating MIDI data: by playing an instrument of their choice with a passive electronic pickup to generate MIDI notes that correspond with the fundamental frequency of the musical pitch being played. The pitch-detecting algorithm used in this application utilizes a modified form of auto-correlation.

As an embedded systems project that uses signal-processing techniques, the knowledge of topics from the following courses was essential:

EE 211: Op-Amp …

Real Time And High Fidelity Quadcopter Tracking System, Tyler Mckay Hall

Computer Engineering

This project was conceived as a desired to have an affordable, flexible and physically compact tracking system for high accuracy spatial and orientation tracking. Specifically, this implementation is focused on providing a low cost motion capture system for future research. It is a tool to enable the further creation of systems that would require the use of accurate placement of landing pads, payload acquires and delivery. This system will provide the quadcopter platform a coordinate system that can be used in addition to GPS.

Field research with quadcopter manufacturers, photographers, agriculture and research organizations were contact and interviewed for information …

Skin Tone Tracking Device (Chromaband), Ziyang Bian

Computer Engineering

It’s long been said that your skin is a window into your health and with many illnesses the first signs of trouble actually show up in your skin. So if we have this natural warning system, then why isn’t anyone able to effectively use it to predict changes in our health? The problem is that currently there is no reliable way to accurately measure the change in skin tone and how these changes may or may not change with variations in health. This project’s aim is to design and develop a device that will record the changes in a user’s …

Blend It Wine Blending Distribution System, Connor Clarry, Russell Temple, Matt Moren

Mechanical Engineering

No abstract provided.

Daily Dose, Ken H. Yasui, Joey M. Angeja

Computer Engineering

The project goal is to develop a medication and vitamin management device that will sort and dispense pre-configured amounts of pills at designated times . The main clientele of this device is the elderly community with a secondary client base of the general public. The entire system is designed from scratch, powered by US standard line voltage. The main functionalities of the device are the ability to store multiple types of pills and the ability to accurately handle user input and data transfer. The two engineering specifications that were not met included the desired pill pick up rate and dimensions …

Joe On The Go, Nico Ledwith, Grayson Meurrens

Computer Engineering

The ultimate goal for this project is to design an automatic, large capacity coffee maker. The system should be able to detect when a cup or mug is in position to receive coffee, then dispense a cup’s worth (~ 8oz) of coffee. When the coffee in the urn is getting low, our system should be able to allow a person to put new coffee grounds in the top, then push a button to start the coffee brewing process. More specifically, we had to accomplish the following tasks in order to meet our goals: solving the issue of transporting water from …

Smartgarden, Samuel S. Lees, Matthew T. Lindly

Computer Engineering

The problem that the SmartGarden project seeks to solve is the challenge of watering succulents correctly and maintaining consistent plant health. Too much water can cause root rot and drowning while too little water can cause dehydration and starvation.
The SmartGarden solves this common problem by configuring a Raspberry Pi to measure soil moisture, store the data to an AWS server in the cloud, and water the succulent when necessary, informing the user by providing both a web-interface and a variety of notifications.

Smartfarm, Nathan A. Oto, Caleb Fink

Computer Engineering

The overall expectation of this product is to create an autonomous Arduino library that accurately and robustly collects plant environment data from the Smart Farm board. The Smart Farm PCB is split into two primary functions: Data Acquisition(DAQ) and Power Control. Each function of the PCB is controlled by an Atmega 328P Microcontroller. The primary concern for this report is the functionality of the DAQ microcontroller.

Mr. Mix: The Automated Home Bartender, Brian Moore, Robert Hulbert

Computer Engineering

No abstract provided.

Micro-Spi Sediment Profile Imaging Micro-Inspector, Andrew P. Corvin, Caleb T. Davies, Matt R. Ferrari

Mechanical Engineering

This project was proposed by Dr. Brian Paavo through a desire to more easily study the benthic sediment layers of the ocean. To do so, he asked us to build a simple and compact machine for use in sediment profile imagery (SPI). Although devices like this already exist, they are all large scale devices that require a ship with a crane to deploy, which is expensive and time consuming. Instead, he desired a “micro” SPI, which is capable of being deployed from a small vessel that can easily navigate shallow waters. Our interpretation of these requirements was as follows: a …

Solid State Drive, Shaun A. Steele

Electrical Engineering

This project documents the design and implementation of a solid state drive (SSD). SSDs are a non-volatile memory storage device that competes with hard disk drives. SSDs rely on flash memory, a type of non-volatile memory that is electrically erased and programmed. The appeal of SSDs lies in the fact that they allow a fast, reliable, and durable memory storage device. The goal of this project is to have a working external SSD built from scratch.

Evergreen: A Senior Project, Ashley Grover

Computer Engineering

No abstract provided.

Android Drone: Remote Quadcopter Control With A Phone, Aubrey John Russell

Computer Engineering

The purpose of the “Android Drone” project was to create a quadcopter that can be controlled by user input sent over the phone’s Wi-Fi connection or 4G internet connection. Furthermore, the purpose was also to be able to receive live video feedback over the internet connection, thus making the drone an inexpensive option compared to other, equivalent drones that might cost thousands of dollars. Not only that, but the Android phone also has a host of other useful features that could be utilized by the drone: this includes GPS, pathing, picture taking, data storage, networking and TCP/IP, a Java software …

Teaching The Internet Of Things: Bridging A Path From Cpe329, Steven Han, Rafael Lopez

Computer Engineering

“The ability to connect, communicate with, and remotely manage an incalculable number of networked, automated devices via the Internet is becoming pervasive, from the commercial kitchen to the residential basement room to the arm of the fitness buff.” - WSO2

In this report, we will investigate procedures and technologies used in IoT. A variety of cloud platforms will be described to demonstrate its strengths and usage on IoT applications. Furthermore, demonstrate the most popular hardware being used in several of these applications. This report is aimed to give a good understanding on what it takes to put together an IoT …

Autonomous Golf Cart Firmware, Gerik Kubiak

Computer Engineering

The Autonomous Golf Cart Project is a project sponsored by the Cal Poly Robotics Club. The multidisciplinary team is adding sensors and electronics to a regular golf cart with the goal to drive the golf cart around campus without and human input. This task requires a plethora of hardware and firmware to control that hardware. The firmware provides an interface for higher level software to then control the hardware and therefore drive the golf cart. This report is focused on the hardware modifications and the firmware used in order to drive the golf cart from a computer.

Studying The Effects Of Serpentine Soil On Adapted And Non-Adapted Species Using Arduino Technology, Kiana Saniee, Edward Himelblau, Brian Paavo

STAR Program Research Presentations

Abstract: Serpentine soils are formed from ultramafic rocks and are represent an extreme environment for plants. Serpentine soils are unique in that they carry high concentrations of heavy metals, are nutrient deficient, particularly in calcium, and have poor water retention capabilities. Although these soils constitute harsh conditions for plant growth, there are a number of species that are adapted and even endemic to serpentine soil. Water retention by commercial potting mix was compared with serpentine soil. Also, serpentine adapted and non-adapted species were grown in both soil treatments and physiological data were collected. We used the Arduino electronic platform to …

Duck Watch: A Smart System For Public Lap Pools, Daniel Griffith, Jill Thetford

Computer Engineering

This paper presents Duck Watch, a proof of concept for a smart swimming pool. With our system, a swimmer will be able to log on to our website prior to leaving his or her house to help them decide if the conditions are favorable to go to a public lap swimming pool. Our system will inform the user of a number of environmental factors such as water temperature, exterior temperature, and humidity, as well as whether or not there are any open lanes currently.

Oluso, Diego Fernandez, Tyler Heucke, Nishant Mattu, Michael Roesch

Computer Engineering

Oluso is a new startup offering affordable, inexpensive technology to empower the individual. Our product is designed to keep the user in contact with someone close to them in emergency situations. Over the course of the past several months we have performed interviews with both individuals who may be interested in this product as well as organizations who may be interested in purchasing this product for their members. Our product is nearing completion and all of the companies we have interviewed have displayed a significant amount of interest in our product. The combination of easy communication and peace of mind …

El Capitán: Cal Poly Rose Float Digital Drive System, Gregory Raffi Baghdikian

Computer Engineering

In today’s world of smartphones, self-driving cars, and internet-connected coffee makers, it seems as if computers are contained in everything around us. These “embedded systems” have become critical components of our lives, improving everything about the things they control, from cost, to speed, to simplicity. One area that embedded systems has hardly gained a foothold is in the world of floatbuilding. Most of the floats in the Tournament of Roses Parade, including the one built jointly by Cal Poly San Luis Obispo and Cal Poly Pomona, are technologically very simple, using mostly analog components and rudimentary discrete digital logic to …

Senior Project: Control System For An Underwater Remotely Operated Vehicle, Tyler Mau, Joseph Mahoney

Computer Engineering

No abstract provided.

Pet Food Monitor Using The Raspberry Pi, Kimberly Aguero

Computer Engineering

Computer system built on a Raspberry Pi that will monitor the levels of food in a pet food bowl. If it detects that there is no food in the bowl, it will notify the user via email or text.

Rapid Battery Exchange Automation, Andrea Everson

Computer Engineering

With the drastic threat of exhausting the world’s fossil fuels, society has been scrambling to find alternative forms of energy for transportation. One of these viable options is an electric vehicle powered by batteries. While this idea is fairly viable, consumers are looking to have the same experience with an electric car than they would with a gas-powered vehicle. One of their major concerns is the lack of range in an electric vehicle.

This project aims to present a solution that would extend the range by allowing users to quickly go from low battery to fully charged battery by performing …

Pinpoint: Location Beacon And Tracking, Ezequiel Lopez Iii

Computer Engineering

The purpose of Pinpoint was to create a device that can collect and transmit location information for multiple users on a wireless network. The device would be used to keep track of and communicate with other users nearby. The final design includes a touchscreen display as a graphical user interface (GUI), an XBee RF module for wireless networking, a GPS receiver for location tracking, and a Programmable System on a Chip (PSoC) to control the modules.

Stand, Lisa Yip

Computer Engineering

With busy lives, people sometimes forget to take breaks for multiple hours at a time. The purpose of this project is to remind the user to move around every hour if they have not already. To do so, stand will be a light weight fitness tracker that will detect the number of steps made within an hour. If the step count, dependent on goals, is not met then a vibration motor will gently remind them to take a break and walk. The data throughout the day will be shown on an iOS application where the user will be able to …

Micronaut: A 2d Action Side Scrolling Platformer For The Apple Tv, Christopher Michael Williams

Computer Science and Software Engineering

Micronaut is a 2D side scrolling platformer video game application developed for the Apple TV with the tvOS SDK version 9.1. It explores human­computer interaction of platformer video games on the Apple TV and aims to give the player the most control to maximize enjoyment. Micronaut features five engaging levels with each level designed to focus on teaching the player the mechanics one at a time. Micronaut has been submitted and is undergoing submission for the Apple TV App Store at the time of this paper. Christopher Williams managed the software development and design, and Jacob Johannesen created the graphical …

Cal Poly Supermileage Electronic Fuel Injection, Alexander Pink

Electrical Engineering

Cal Poly Supermileage is a student-run engineering club that builds prototype gasoline vehicles optimized maximum fuel-efficiency. To power their vehicles, the Supermileage team makes use of single-cylinder, 4-stroke, electronically fuel-injected (EFI) gasoline engines. This report details the development, iterative design & test cycles, and integration of an EFI system for the Supermileage club. This project develops an EFI system that interfaces to the most common types of sensors found in the low-power Supermileage-range of engines, including throttle-position sensors, manifold absolute pressure sensors, gear-tooth hall-effect sensors, variable-reluctance position sensors, engine coolant temperature sensors, intake air temperature sensors, and exhaust oxygen sensors. …

Microcontroller Application For Linear And Rotational Motion Sensing, Zachary Mintzer

Computer Engineering

No abstract provided.

Power Supply For Driving High Power Leds With Wireless Control, Joshua C. Avery

Computer Engineering

This project is the design of a power supply for driving high power light emitting diodes (LEDs) with wireless control. The project is divided into two sections, the power supply for driving the LED lights, and the wireless control and fan power supply.

Printed Circuit Board For Introductory Animatronics Course, Preston Brown

Computer Engineering

For many years, freshmen Computer Engineering students at California Polytechnic State University have taken a course that introduces them to the “processes of electronics manufacturing. They are lectured on concepts such as CAD/CAM design, Design for Manufacture (DFM), documentation requirements, prototyping and production planning”. The laboratory portion of the course allows students to “use hands-on techniques to solidify knowledge of project planning, soldering, automation, hand tool usage and production methods” by manufacturing their own power supply, starting with aluminum sheets, a bag of components, and and an unassembled printed circuit board (PCB).

While the project is popular among students, department …

Universal Uav Payload Interface, Nolan Reker, David Troy Jr, Drew Troxell

Computer Engineering

Unmanned Aerial Vehicle (UAV) technology is becoming increasingly accessible for civilian use. Both open-source and commercial-purpose UAVs can be obtained affordably or even built. However, the platforms available are very segmented in their customization to a specific application (i.e. land surveying, payload delivery). This project aims to create a Universal Payload Interface (UPI) mounted to the underside of multi-rotors or other UAVs to enable the attachment of customizable sensor payloads. These payloads allow a single UAV to be rapidly reconfigured to perform a multitude of tasks.

The Universal Payload Interface facilitates communication between the payload, onboard flight controller, and operator …