Construction Engineering and Management Commons^™

Slope Stability Enhancement Of An Upstream Tailings Dam: Laboratory Testing And Numerical Modelling, Yazeed A. Alsharedah

Electronic Thesis and Dissertation Repository

Mine tailings are the byproduct of mining activities, which need to be disposed of once the ore is extracted. They can be disposed of in either dry or wet forms. The latter is most common with the tailings being disposed of in the form of slurry inside retention structures. The retention structure may be a natural, manmade, or built dam, which is the case in most of nowadays mining locations. In this thesis, improving the stability of an upstream tailings dam using soil additives is investigated. The experimental phase of this study involved laboratory tests conducted to characterize mine tailings …

Design And Construction Process Management, David Brown

David C. Brown

New approaches for improving design and construction processes have been used recently. Innovative methods for managing the requirements and quality of these processes will be discussed. A systematic data centric approach will be discussed as well as the processes of separating progress from performance. It discusses the integration of these processes in the planning, risk analysis, design, submission, construction, inspection, quality control and documentation phases.

Comparative Analysis Of Buckling-Restrained Braced Frames In Eccentric Configuration (Brbf-Es) And Eccentrically Braced Frames (Ebfs), Peter T. Vayda

Civil Engineering Undergraduate Honors Theses

Continuing on the findings of “Using Buckling-Restrained Braced Frames in Eccentric Configuration,” by Dr. Gary S. Prinz, P.E., which determined that, from a performance standpoint, BRBF-Es could be a viable alternative for EBFs. A comparative analysis was conducted on the design procedures and initial cost estimates of BRBF-Es and EBFs. Upon designing four 12-Story buildings (two BRBF-Es and two EBFs), it was determined that BRBF-Es were easier to design due to the statically determinant system. The initial costs estimates of BRBF-Es; however, ranged upwards of 30% more cost than EBFs. Therefore, the initial investment of more intensive structural engineering design …

Correlation Of Engineering Parameters Of The Presumpscot Formation To The Seismic Cone Penetration Test (Scptu), Mathew Hardison

Electronic Theses and Dissertations

The seismic cone penetration test with pore pressure measurement (SCPTu) is a geotechnical investigation technique which involves pushing a sensitized cone into the subsurface at a constant rate while continuously measuring tip resistance, sleeve friction, and pore pressure resulting from soil shearing. Additionally, shear wave velocity measurements can be collected at discrete intervals throughout the test. Empirical and theoretical correlations have been developed between these measurements and soil engineering properties such as preconsoldiation pressure and undrained shear strength. Soil classification, location of silt/sand seams, seismic design parameters, and liquefaction potential can also be obtained from SCPTu results.

The objective of …

Bs News November/December

Building Services Engineering

No abstract provided.

Diseño De Edificaciones Aporticadas Por Medio Del Método De Diseño Sísmico Directo Basado En Desplazamientos Ddbd, Ejemplo De Aplicación, Luisa Fernanda Montañez Moreno

Ingeniería Civil

No abstract provided.

A Semantics-Based Approach To Construction Cost Estimating, Mehrdad Niknam

Dissertations (1934 -)

A construction project requires collaboration of different organizations such as owner, designer, contractor, and resource suppliers. These organizations need to exchange information to improve their teamwork. Understanding the information created in other organizations requires specialized human resources. Construction cost estimating is one of the processes that requires information collected from several sources including a building information model (BIM) created by designers, estimating assembly and work item information maintained by contractors, and construction resource cost information provided by resource suppliers. Currently, it is not easy for computers to integrate the information for construction cost estimating over the Internet. This study discusses …

Use Of Coconut Shell As An Aggregate In Concrete: A Review, Sourav Ghosal, S. C. Moulik

Innovative Research Publications IRP India

Now-a-days, the rising cost of building materials for construction purposes is a factor of great concern. The price of building materials is rising day by day. Now, most of the researchers are paying much attention on the suitable materials which can reduce the cost of construction as well as increase the strength properties of concrete. Mainly gravel and sand are used in the preparation of conventional concrete. While the use of an agricultural by-product i.e. coconut shell as a partial replacement with conventional coarse aggregates is expected to serve the purpose of encouraging housing developers in building construction. Environmental impact …

Bs News September/October

Building Services Engineering

No abstract provided.

Comparisons Of Linear Regression Models For Properties Of Alkaliactivated Binder Concrete, Arkamitra Kar, Udaya B. Halabe, Indrajit Ray, Avinash Unnikrishnan

Civil and Environmental Engineering Faculty Publications and Presentations

Concrete with alkali-activated binder (AAB) is increasingly considered as a better alternative to conventional portland cement (PC) concrete due to its superior sustainable and green properties. In order to promote the practical usage of AAB concrete, a previous study by the present authors proposed models on correlations among their mechanical and nondestructive properties. The present study extends the previous knowledge by proposing new improved models using linear regressions to predict compressive strengths and modulus of elasticity from ultrasonic pulse velocities. The models are developed for both unstressed and stressed AAB concrete with different curing temperatures. The accuracies of the models …

A Computer Program For Optimal Control Of Water Supply Pump Stations: Development And Testing, Donald V. Chase

Donald V. Chase

This report presents an optimal control methodology designed to reduce the electrical consumption and operating costs at Army water supply pumping stations. The methodology, contained in a computer program called Optimal Control of Pumping Stations (OCOPS), enables water utility managers and operators to reduce the electrical consumption at pumping stations while maintaining adequate storage and system pressures for fire protection. OCOPS can be applied to any water distribution system and is not limited to any number of pumps, pump stations, or storage tanks within the system. The optimal control strategy developed is based on electricity unit charges, but can be …

Water Distribution Modeling, Thomas M. Walski, Donald V. Chase, Dragan A. Savic

Donald V. Chase

To effectively use water distribution models, the engineer must be able to link knowledge of basic hydraulic theory and the mechanics of the program with that of the operation of real-world systems. Water Distribution Modeling does just that. Written by industry experts, it provides a practical resource for engineers and modelers that goes well beyond being a how-to guide for typing data into a computer program. It contains straightforward answers to common questions related both to modeling and to distribution systems in general. This textbook walks the practicing engineer or student through the modeling process from start to finish — …

Post-Tensioned Concrete Shear Wall, Purdue Ect Team

ECT Fact Sheets

The post-tension concrete shear wall by Tipping Mar will replace the conventional concrete shear wall in earthquake prone areas in many instances, depending on the height and scale of the building.

Rapid Drying Concrete, Purdue Ect Team

ECT Fact Sheets

One of the essential problems that are faced during construction is the drying of concrete and the presence of moisture which affects floor coverings that need to be placed. The rapid-drying characteristic in Aridusâ concrete allows for the quick reduction of moisture vapor that travels through the concrete pores of the concrete.

Ap Alternatives Modular Solar Racking, Purdue Ect Team

ECT Fact Sheets

Solar panels have been used to generate and supply electricity in various applications such as residential and commercial buildings. Therefore, a need for a quicker approach to installation as well as the need to reduce workmanship to speed up the process is needed. Solar racks are developed through the use of automated equipment to “preassemble the racking hardware, pre-install the solar modules, and drive helical anchors into the ground rapidly”. So instead of installing one panel at a time, AP Alternatives has created a new method that uses machines to make the process easier. This new automation of the installation …

Prefabricated Building, Purdue Ect Team

ECT Fact Sheets

With the continuous demand for construction of new buildings, an easier, more sustainable, energy-efficient and environmentally friendly building method is necessary to save time, energy and cost. Hence, there has been an increasing need for a system such as BROAD sustainable building (BSB). A form of prefabricated building by BROAD Sustainable Building Co., LTD (BSB). It consists of flooring and ceiling, embedded shafts of ventilation, water supply & drainage, electricity and lighting. Other items include pillars, diagonal bracings, doors, windows, walls and sanitary wares, air conditioning, air quality products, lifts, building thermal insulations.

Vertical Icf Wall System, Purdue Ect Team

ECT Fact Sheets

Traditional ICF systems’ installation is tedious and labor intensive resulting in out of level, bowing, and snaking walls with a significant amount of bracing adding to the cost. ICF (Insulated Concrete Form) walls are a form of structural walls used for construction. Hobbs Vertical ICF system uses less concrete, more recycled material and requires less labor for construction. The furring assemblies and retainer clips of the Hobbs VICF system are made from 100% recycled post-industrial waste.

3d Printing For Bricks, Purdue Ect Team

ECT Fact Sheets

Building Bytes, by Brian Peters, is a project that uses desktop 3D printers to print bricks for architecture. Instead of using an expensive custom-made printer, it uses a normal standard 3D printer which is available for everyone and makes it more accessible and also easier for fabrication.

Influence Of Warping On Stress For Restrained Concrete Slabs: For Application To Crcp, Corey M. Beck, W. Jason Weiss, Nathan T. Todd

The Summer Undergraduate Research Fellowship (SURF) Symposium

Continuously-reinforced concrete pavement (CRCP) is widely used in transportation system because of its low maintenance requirement. However, the need for large volumes of steel creates a high cost for new construction. The Illinois Tollway is preparing to substantially renovate highways in and around Chicago and this work seeks to understand how concretes of varying mixture designs can be made thinner by reducing the amount of built-in stress. The experiment examines warping in beams subjected to various degrees of restraint, in an effort to assess effectiveness at reducing warping in continuously reinforced concrete pavements. Value added methodologies such as internal curing …

Mudflow Disaster Damage Job Opportunity, Disrupt Social Life And Settlement, Thus Requiring Resettlement. Need To Understand Whether Physical Condition Of Resettlement Is In Accordance With Background And Housing Preference Of Victim, Due To Significant Differences Of Housing Design. Aspects Studied Were Characteristic Of Resettlement, Physical Condition Of House And Socio-Economic Mobility. Research Was Done Using Qualitative Method. Technique Of Data Collection Was Used Retrospective Interviews And Observation. This Research Result Indicates That Most Participants Experienced Conformity In House Physical Condition And Socioeconomic Mobility. Reason Of Unconformity Condition Is Housing Facility Which Has Not Meet Housing Standard., Gitanjali Biranga, S V. . Admane, S S. Shinde

Innovative Research Publications IRP India

Energy efficiency has nowadays become one of the most challenging tasks and this has boosted research on fresh fields, such as Ambient Intelligence. Energy consumption in the housing and tertiary sectors is especially high in developed countries. There is a great potential for energy savings in these sectors. Energy conservation measures are developed for newly constructed buildings and for buildings under restoration. However, to achieve a significant diminution in energy consumption apart from the standard energy-efficiency methods, pioneering technologies should be implemented, including renewable energy. Now, buildings are increasingly anticipated to meet higher and more complex performance requirements. Among these …

Bs News July/August

Building Services Engineering

No abstract provided.

Identification Of Risk Factors Associated With Motorcycle-Related Fatalities In Ohio, Deogratias Eustace, Vamsi Krishna Indupuru, Peter W. Hovey

Peter Hovey

Out of the 7,138,476 motorcycles operating on U.S. roads, 346,925 were registered in the state of Ohio in the year 2007. Although motorcycles represent only 2.8% of all registered vehicles in the state of Ohio, motorcycling accounts for more than 13% of Ohio highway traffic fatalities. Since 2005, Ohio has had a distressing distinction of being among the fifteen states that have sustained more than half of all motorcycle fatalities recorded in the USA (NHTSA 2007; NHTSA 2008a). For the past ten years, the overall motorcycle crash fatalities have been increasing while the motor vehicle occupant crash fatalities have been …

Performance Comparison Of A Roundabout Versus Two-Way Stop Controlled (Twsc) Intersections, Deogratias Eustace

Deogratias Eustace

The superior safety record of modern roundabouts is well known in Western Europe, Australia and in most British-influenced countries around the world. The experience from a single modern roundabout installed in the City of Manhattan, Kansas, some three years ago, also shares the same experience. A major study of the performance of Manhattan, Kansas, modern roundabout was conducted at Kansas State University (KSU) and was co-sponsored by Mac-Blackwell National Rural Transportation Study Center, Kansas State University, and the City of Manhattan. The study examined three intersections, one modern roundabout and two Two-Way Stop Controlled (TWSC) intersections with similar traffic conditions. …

Identification Of Risk Factors Associated With Motorcycle-Related Fatalities In Ohio, Deogratias Eustace, Vamsi Krishna Indupuru, Peter W. Hovey

Deogratias Eustace

Out of the 7,138,476 motorcycles operating on U.S. roads, 346,925 were registered in the state of Ohio in the year 2007. Although motorcycles represent only 2.8% of all registered vehicles in the state of Ohio, motorcycling accounts for more than 13% of Ohio highway traffic fatalities. Since 2005, Ohio has had a distressing distinction of being among the fifteen states that have sustained more than half of all motorcycle fatalities recorded in the USA (NHTSA 2007; NHTSA 2008a). For the past ten years, the overall motorcycle crash fatalities have been increasing while the motor vehicle occupant crash fatalities have been …

A Simplified Method For Analyzing Factors Contributing To Motorcyclists’ Fatal Injuries In Ohio, Deogratias Eustace, Vamsi Krishna Indupuru

Deogratias Eustace

The aim of this paper was to analyze traffic crash data by using a simplified method in determining significant factors that increase the risk of a motorcyclist being fatally injured once involved in a motorcycle crash in Ohio. The concept of overrepresentation, which is similar to relative risk, was used in identifying significant variables associated with the elevated risk of a motorcycle crash resulting into a fatality. The overrepresentation factor (ORF) was calculated for each variable of interest. The ORF offers a simple but powerful procedure of determining whether a certain factor significantly occurs more or less frequently in one …

A Microscopic Simulation Approach To Performance Evaluation Of Intelligent Transportation System Corridors: A Case In Michigan, Matthew Levi Clark

Masters Theses

A cost and benefit evaluation of the Michigan Department of Transportation’s (MDOT) Intelligent Transportation Systems (ITS) is performed through integration of analytical techniques and microscopic traffic microsimulation. Observed freeway corridor incident logs and characteristics are studied to determine representative incident management patterns on choice study corridors. The Quadstone Paramics microsimulation traffic package is used to model the selected corridors during various analysis scenarios and investigate the effects of ITS on freeway incident management performance.

Criticality And Risk Assessment For Pipe Rehabilitation In The City Of Santa Barbara Sewer System, Rossi Carmelo Rossi Ii

Master's Theses

Aging sewer infrastructure is posing greater and greater risk to the health and well-being of City residents. Issues can range from pipe blockages in sewer laterals to Sanitary Sewer Overflows. This thesis develops a risk analysis method that can be used by municipalities to maintain and rehabilitate sewer assets. Risk combines the effect of Likelihood of Failure (LOF) and Consequence of Failure (COF) to perform a complete two-dimensional analysis that allows for relative comparison between different pipes in the system. The LOF rating has been equated to pipe integrity while the COF rating was related to the environmental, economic, and …

Nawic Focus (May 2015), National Association Of Women In Construction - Maine Chapter Staff

Maine Women's Publications - All

No abstract provided.

Bs News May/June

Building Services Engineering

No abstract provided.

Cleveland Sidewalk Studies: Plan For Blythe Avenue Area Sidewalk Extension To 20th Street Se And Plan For Neighborhood Connector Sidewalks To Wildwood Avenue, Thuy Trieu, Kelly Nicholas, Scott Rice, Michael Williams, Heath Sain, Jonathan Reagan

Chancellor’s Honors Program Projects

No abstract provided.