Civil Engineering Commons^™

The Aerodynamic And Dynamic Loading Of A Slender Structure By An Impacting Tornado-Like Vortex: The Influence Of Relative Vortex-To-Structure Size On Structural Loading, Matthew Nicholas Strasser

Graduate Theses and Dissertations

Structural loading produced by an impacting vortex is a hazardous phenomenon that is encountered in numerous applications ranging from the destruction of residences by tornados to the chopping of tip vortices by rotors. Adequate design of structures to resist vortex-induced structural loading necessitates study of the phenomenon that control the structural loading produced by an impacting vortex. This body of work extends the current knowledge base of vortex-structure interaction by evaluating the influence of the relative vortex-to-structure size on the structural loading that the vortex produces. A computer model is utilized to directly simulate the two-dimensional impact of an impinging …

Application Of Polyacrylamide-Based Floc Logs For Turbidity Control At Highway Construction Sites, Kien Ngo

Graduate Theses and Dissertations

Runoff waters generated on highway construction sites can have turbidities in excess of the proposed EPA regulatory standard of 280 NTU due to large areas of exposed soil. The objective of this research was to develop best management practices (BMPs) for the use of anionic polyacrylamide (PAM) based Floc Logs, for turbidity control. Five commercially available types of PAM-based Floc Logs were evaluated in jar tests, using soil excavated from Cato Springs Research Center (CSRC, Fayetteville AR) and six types of clay from the Clay Minerals Society (Chantilly, VA). These results show that no single Floc Log type was suitable …

Alkali Silica Reaction Mitigation Using High Volume Class C Fly Ash, William Joseph Phillips

Graduate Theses and Dissertations

Alkali-Silica Reaction (ASR) is a neutralization reaction that occurs between an acid (silicic acid) and a basic pH pore solution (Calcium Oxide, Potassium Oxide, and Sodium Oxide). ASR causes deleterious expansion within concrete, which can cause durability issues decreasing the life span of concrete. ASR in concrete has been found in increasing quantities since its discovery in 1940 by Stanton. Several cases of ASR have occurred in Arkansas near Fayetteville, Pine Bluff, and Little Rock. The purpose of this research was to develop preventative measures using Class C fly ash in concrete, which contains the moderately reactive aggregates found in …

Value Focused Inland Waterway Infrastructure Investment Decisions, Othman Boudhoum

Graduate Theses and Dissertations

Maritime transportation functions as the backbone of world trade. The U.S. inland waterway transportation system is comprised of 12,000 miles of navigable waterways that connect and move freight between the global supply chain and thirty eight States. When investing in inland waterway infrastructure, we should aim to maximize all benefits associated with the investment including flood protection, water supply, hydropower generation, recreation, and environmental impact benefits. We formulate an initial qualitative value model for the inland waterway infrastructure investment decision based on a value-focused thinking approach which allows us to holistically evaluate project investment alternatives. Given limited resources, a portfolio …

Development Of Best Management Practices For Turbidity Control During Rainfall Events At Highway Construction Sites Using Polyacrylamide, Joanne Johnson

Graduate Theses and Dissertations

In 2009, the United States Environmental Protection Agency (EPA) promulgated a national turbidity standard for runoff water leaving highway construction sites at 280 nephelometric turbidity units (NTU). Meeting this standard can be challenging as turbidities of runoff waters can exceed 15,000 NTU. The objective of this research was to assess polyacrylamide (PAM), a coagulant aid used in water treatment, to help meet the EPA turbidity regulation. Twelve commercially available PAM types were studied, selected on the basis of charge type (cationic, nonionic, anionic), charge density (0-100%), and molecular weight (0.1-28 Mg mol-1). Jar tests were conducted with runoff waters from …

Laboratory Comparison Of Full Depth Reclamation Stabilization Techniques Using Arkansas Field Materials, Chase Aaron Henrichs

Graduate Theses and Dissertations

Full depth reclamation (FDR) is a flexible pavement recycling technique that has not been explored in the state of Arkansas. FDR is unique in that it incorporates the entire flexible pavement section as well as a predetermined portion of the underlying base and sub-base materials with a stabilizer to create a new, stronger stabilized base course. Common stabilization techniques include the addition of asphalt emulsion, asphalt foam, or cement. Using the North Carolina emulsion FDR mix design, the Wirtgen foam FDR mix design, and the Portland Cement Association cement FDR mix design, field materials from four Arkansas highways in the …

Comparing Layer Types For The Use Of Mepdg For Fdr Design, Sadie Smith

Graduate Theses and Dissertations

While Full Depth Reclamation (FDR) has many potential cost and environmental benefits, especially over the lifetime of the pavement, it is necessary to be able to ensure that the recycled pavement will perform adequately. One way in which this can be accomplished is understanding how to best complete the structural design of FDR pavements. Because FDR is a combination of several different layers of material pulverized, mixed, stabilized and re-compacted, it does not fit neatly into any of these predetermined types of materials considered by the Mechanistic Empirical Design Guide (MEPDG). Current practice is to treat FDR as an unbound …

Three Dimensional Simulations Of Tornado Sheltering Effect Of Man-Made Structures, Piotr Gorecki

Graduate Theses and Dissertations

A three dimensional computational fluid dynamics (CFD) model was utilized to investigate tornado-like vortex interactions with wide man-made structures. The tornado-like wind profile was approximated using Rankine vortex model. By utilizing the CFD model, it was explained why tornadoes exhibit less damage on leeward side of large structures. During the preliminary stage of this study, a perpendicular vortex-prism interaction was analyzed. The prism height and the length were equal to the vortex core radius. The prism was also 12 times wider than the vortex core radius. During the vortex-prism interaction, the near-ground portion of the vortex was blocked by the …

Amount Of Uncertainty In The Methods Utilized To Design Drilled Shaft Foundations, Morgan Race

Graduate Theses and Dissertations

In 2001, load and resistance factor design (LRFD) for deep foundations was required by the American Association of State Highway and Transportation Officials (AASHTO). Following implementation of LRFD, localized calibration of resistance factors using data from the states of Colorado, Florida, Kansas, Louisiana/Mississippi, Missouri allowed these states to utilize higher resistance factors during design. However, characterizing the uncertainty in the design of DSF, regarding the geotechnical investigation methods and the utilized software programs, higher values of resistance factors may be calibrated to more efficiently design DSF with the same level of reliability.

Three test sites within the state of Arkansas, …

Measurement Of Transfer And Development Lengths Of 0.7 In. Strands On Pretensioned Concrete Elements, Canh Ngoc Dang

Graduate Theses and Dissertations

The implementation of 0.7 in. (17.8 mm), Grade 270 (1860), low-relaxation prestressing strands in construction is slow regardless of its advantages over the use of 0.6 in. (15.2 mm) and 0.5 in. (12.7 mm) strands. The limited research data and unavailable design guidelines partially account for the slow utilization. This study measured transfer and development length, and evaluated applicable strand spacing of 0.7 in. (17.8 mm) prestressing strands for 24 pretensioned concrete beams. Each beam contained one prestressing strand or two prestressing strands placed at spacing of 2.0 in. (51 mm). The beams were fabricated with high strength, conventional concrete …