Civil Engineering Commons^™

Nondestructive Evaluation Of Structural Defects In Concrete Slabs, Ehsanul Kabir

Electronic Theses and Dissertations

Nondestructive testing (NDT) is a reliable method for determining the structural integrity of new and old construction and understanding the condition of structural defects. It is widely acknowledged that the interpretation of nondestructive evaluation (NDE) has a significant impact on the reliability and consistency of this technology. However, NDT data acquisition remains subjective and heavily dependent on the operator’s knowledge and expertise. As a result, there are still issues to be resolved regarding the imaging and diagnostic procedures for NDT-based concrete inspection. NDT methods such as ground penetrating radar (GPR), and impact-echo (IE), have been extensively used to inspect concrete …

An Analysis Of The Effect Of Temperature On Asphalt Paving In South Dakota, S M Rahat Rashedi

Electronic Theses and Dissertations

Temperature is an important parameter to consider for asphalt paving since this work is generally susceptible to weather due to outdoor construction. The South Dakota Department of Transportation (SDDOT) developed working day weather charts in 1998 to address the expected adverse weather days. This thesis investigated the effect of temperature on adverse weather days for asphalt paving and compared them to the value reported in the 1998 SDDOT study. Moreover, the thesis also examined how closely the maximum temperature data from project sites' weekly progress reports (WPR) matched the data from the closest weather stations. When the maximum temperature (TMAX) …

An Enhanced Framework To Compute Road User Costs Associated With Construction Zones, Jeremiah Adebiyi

Electronic Theses and Dissertations

The monetary quantification of inconveniences caused to the road users by ongoing construction activities is known as the Road Users Costs (RUCs). While the importance of RUCs is widely known, some highway agencies lack an appropriate methodology to compute RUCs. Thus, there is a need to develop a framework to compute RUCs that can be adopted quickly by highway agencies. This study reviewed existing literature and conducted a nationwide survey to identify and summarize the current practices of computing RUCs. It developed an enhanced framework and tool to compute RUCs that balances the effort required to calculate RUCs and the …

New Longitudinal Error Balancing Approaches For Closed Traverses, Jose L. Manzano

Electronic Theses and Dissertations

This study presents two novel approaches to balance the horizontal longitudinal error of closure, E_C, in closed polygonal traverses. The standard procedure to balance E_C is the Compass Rule. This technique reduces E_C to zero by applying corrections in the lengths of all traverse sides. Those corrections are proportional to the corresponding side lengths. That is, this approach is not an error-correcting approach, but an error-balancing procedure.

The proposed new techniques are based on sensitivity analysis of E_C with respect to small variations, Δ_i, in the lengths of all sides i = 1, …

Ultra-High Performance Concrete For Precast Seismic Bridge Column Connection, Titchenda Chan

Electronic Theses and Dissertations

Accelerated bridge construction (ABC) utilizes prefabricated bridge elements constructed off-site, delivered, and assembled on-site to expedite construction time and reduce traffic disruption. ABC has been increasingly used for super- and sub-structure elements in low seismic regions. However, its application in medium and high seismic regions remain limited, particularly for precast columns where connections typically coincide with plastic hinge (PH) regions. Ultra-high performance concrete (UHPC), characterized by high compressive and tensile strength, and superior bond properties, is a potential material that can mitigate PH damage and enhance load transfer. This research proposes a new and simple damage tolerant precast column connection …

Designing And Testing 3-D Printed Wafer-Box With Embedded Pzt Sensors To Identify The Shape Effect On Energy Harvesting, Ahmad Jami Safayet

Electronic Theses and Dissertations

Piezoelectric energy has been recently paid attention in the field of alternative energy. Day by day the traditional energy sources including Coal tar and oils are becoming scarce. People are heading to an alternative energy source to meet the future energy demand. Piezoelectric energy is one of the competitive energy sources compared to the conventional renewable energy sources including solar, wind, and geothermal power and so on. This energy production method bears enormous research potential because it can be used as the roadway for a new method of power generation. This research project aimed to identify which shaped wafer-box produced …

Building Information Modeling (Bim) Impact On Construction Performance, David D. John

Electronic Theses and Dissertations

This study is designed to address the need for having a measure for Construction Performance on BIM-assisted construction projects. Through this study a new Construction Key Performance Indicator (CKPI) matrix is identified and created by the author. The CKPI could be used to assess BIM-assisted projects. Utilizing a sequential mixed methodology approach, academic and practitioner perspectives are assessed. A qualitative content analysis and quantitative descriptive analysis based on demographics are conducted to establish a better understanding of BIM and Construction Performance. The academic perspective is used to assess the relevance of BIMM and CKPI indicators, and the practitioner perspective is …

A Tool To Evaluate Sustainability Of Pavement Maintenance Projects., Yibo Zhang

Electronic Theses and Dissertations

Pavement maintenance activities are widely regarded to be critical elements during pavement life cycle, different maintenance techniques have been used to restore or extend the service lives of pavements. However, the existing maintenance practices on pavement system have problems that impair the economic benefits, disturb the natural environment, and somewhat ignore the needs from stakeholders. To minimize these negative impacts, sustainability is an ideal way because it addresses the problems under Triple Bottom Line (TBL, refers to economy, environment, and society). Sustainability analysis within transportation or pavement industry has been studied in different countries, but the concept of sustainable pavement …

Audio-Based Productivity Forecasting Of Construction Cyclic Activities, Chris A. Sabillon

Electronic Theses and Dissertations

Due to its high cost, project managers must be able to monitor the performance of construction heavy equipment promptly. This cannot be achieved through traditional management techniques, which are based on direct observation or on estimations from historical data. Some manufacturers have started to integrate their proprietary technologies, but construction contractors are unlikely to have a fleet of entirely new and single manufacturer equipment for this to represent a solution. Third party automated approaches include the use of active sensors such as accelerometers and gyroscopes, passive technologies such as computer vision and image processing, and audio signal processing. Hitherto, most …

A Case Study Of Student Veteran Efficacy In The College Of Engineering And Information Technology At Georgia Southern University, Kevin G. Finley

Electronic Theses and Dissertations

This thesis addresses the issues student veterans face in their transition from military to academic life while pursuing an undergraduate degree in the STEM fields (Science, Technology, Engineering, Math) at Georgia Southern University’s College of Engineering and Information Technology (CEIT). Historically this transition has been a difficult one. Through the implementation of a mentorship program comprised of military veterans on the staff and faculty of Georgia Southern University as well as assistance and participation from members of the case study researcher team and primary researcher this program assisted incoming military student veterans as they assimilated into the collegiate atmosphere. The …

Correlation Of Engineering Parameters Of The Presumpscot Formation To The Seismic Cone Penetration Test (Scptu), Mathew Hardison

Electronic Theses and Dissertations

The seismic cone penetration test with pore pressure measurement (SCPTu) is a geotechnical investigation technique which involves pushing a sensitized cone into the subsurface at a constant rate while continuously measuring tip resistance, sleeve friction, and pore pressure resulting from soil shearing. Additionally, shear wave velocity measurements can be collected at discrete intervals throughout the test. Empirical and theoretical correlations have been developed between these measurements and soil engineering properties such as preconsoldiation pressure and undrained shear strength. Soil classification, location of silt/sand seams, seismic design parameters, and liquefaction potential can also be obtained from SCPTu results.

The objective of …

Sustainable Material Solution For Flexible Pavements; Performance Evaluation And Impact Assessment Of Utilizing Multiple Recycled Materials In Hma, Behnam Golestani

Electronic Theses and Dissertations

The demand for pollution-free and recyclable engineering materials has been increased as the cost of energy and environmental concerns have risen. Green material design can lead to better environmental quality and sustainability of civil infrastructure. Road construction is one of the largest consumers of natural resources. Beneficial utilization of recycled materials can result in an important opportunity to save the mining and use of virgin materials, to preserve energy, and to save landfill space. Two main research questions addressed in this study are: (1) How much pollution, energy, natural resources, time and money can be salvaged by applying recycling materials …

Color Removal From Pulp Mill Effluent Using Coal Ash Produced From Georgia Power Coal Combustion Plants, Christopher B. Willett

Electronic Theses and Dissertations

Two environmental concerns currently face Georgia: coal fly ash (CFA) waste from coal power plants, and the effluent generated by pulp mills. Pulp mill effluent discolors surface waters into which it is discharged, and has been proven to negatively impact the dissolved oxygen and carbon necessary for aquatic life. The proposed solution is a cost-effective adsorption treatment using an inexpensive but abundantly available waste material: CFA. CFA possesses beneficial properties that allow it to effectively remove contaminants, and is available at significantly reduced cost. The primary research objective was to define treatment parameters that would result in the maximum removal …

Early-Age Hydration Studies Of Portland Cement, Fengjuan Liu

Electronic Theses and Dissertations

Our current knowledge on cement hydration during setting is based on the discrete observation of hydrated paste. An advanced micro/nano-level technique which can perform the in-situ observation on the continuous hydration of cement paste is demanded. In this study, Raman spectroscopy (RS) was chosen as such a method to continuously investigate wet pastes. The objective of this research is to explore the hydration process and microstructural development of fresh pastes with this technique. This research was conducted in three phases. First, the RS analysis was used to continuously observe the cement hydration from 20 minutes after mixing to 9 hours. …