Civil Engineering Commons^™

Bim Innovation Capability Programme: An Irish Bim Study, Barry Mcauley, Alan Hore, Roger West

Articles

In 2011 the Royal Institute of Architects Ireland (RIAI) conducted a survey which found that BIM adoption within Ireland was quite low at 16%. Over the last five years these figures have risen significantly, with the 2016 Irish Digital Transition Survey reporting that 76% of respondents possess confidence in their organisation’s BIM skills and knowledge. This represents a significant shift of BIM adoption in Ireland over the last five years.

The BIM Innovation Capability Programme (BICP) Irish BIM study, builds on the findings from the BICP Global BIM Study by providing an in depth review of BIM in Ireland with …

Bs News November/December

Building Services Engineering

No abstract provided.

Reflecting Societal Values In Designing Flood Risk Management Strategies, Mark Adamson, John O'Sullivan, Zeinab Bedri

Conference papers

In 2006, the Office of Public Works (OPW) began the National Catchment-based Flood Risk Assessment and Management (CFRAM) Programme through a series of pilot studies. A Multi-Criteria Analysis (MCA) Framework was developed through the pilot studies that integrated a number of objectives related to a wide range of potential impacts and benefits into the core of process of appraising and selecting suitable flood risk management measures for a given area or location, and then for prioritising national investments for different schemes and projects. This MCA Framework, that provides a systematic process of developing a non-monetised but numerical indicator of benefit …

Evaluation Of Slope Stability Quantifying The Effect Of Vegetation, Roberto José Marín, Juan Pablo Osorio

Conference papers

The present study evaluates the shallow landslides susceptibility triggered by rainfall by means of multiple numerical simulations. The simulations integrate a transient rainfall infiltration model with an infinite slope stability model, both of them developed for unsaturated soils in a basin scale. TRIGRS’ infiltration model is used to calculate pore water pressure. The geotechnical model includes the evaluation of two parameters related to vegetation: root reinforcement and tree surcharge due to the weight of the vegetation. These simulations were carried out using multiple values of these parameters so that their behavior is analyzed for the topographic conditions of the watershed …

Bs News September/October

Building Services Engineering

No abstract provided.

Lifelong Housing Design: User Feedback Evaluation Of Smart Objects And Accessible Houses For Healthy Ageing, Matteo Zallio, Niccolò Casiddu

Conference Papers

According to the latest research by the European Community and ISTAT (Italian National Institute of Statistics) surveys, Europe has the highest average age for its population. According to those data, in the near future, it could be necessary to move from a welfare model based on the centralization of care systems, to a system based on the distribution of certain healthcare facilities [1]. This means that the ageing population is ever increasing, thanks to better lifestyles, innovative medical care and wider access to different services. This work seeks to observe and analyse key implications of architectural and interior design features …

Bs News July/August

Building Services Engineering

No abstract provided.

Bs News May/June

Building Services Engineering

No abstract provided.

Bs News March/April

Building Services Engineering

No abstract provided.

Daylighting And Thermo-Electrical Performance Of An Autonomous Suspended Particle Device Evacuated Glazing, Aritra Ghosh

Doctoral

Suspended particle device (SPD) glazing is an AC powered switchable glazing. PV powered SPD evacuated (vacuum) glazing was proposed with the potential of reducing the heating demand, cooling demand and artificial lighting demand of a building. To achieve an autonomous SPD vacuum glazing, semi empirical simulation and outdoor characterisation was explored in this thesis. Transmission of SPD glazing (area 0.058 m2) varied from 5% when opaque to 55% when transparent in the presence of 110 V, 0.07 W AC supply was characterised in outdoor test cell in Dublin. The SPD glazing has variable spectral transmission in the presence of variable …

Evaluating A Microbial Water Quality Prediction Model For Beach Management Under The Revised Eu Bathing Water Directive, Zeinab Bedri, Aisling Corkery, John O'Sullivan, Louise Deering, Katalin Demeter, Wim Meijer, Gregory O'Hare, Bartholomew Masterson

Articles

The revised Bathing Water Directive (2006/7/EC) requires EU member states to minimise the risk to public health from faecal pollution at bathing waters through improved monitoring and management approaches. While increasingly sophisticated measurement methods (such as microbial source tracking) assist in the management of bathing water resources, the use of deterministic predictive models for this purpose, while having the potential to provide decision making support, remains less common.

This study explores an integrated, deterministic catchment-coastal hydro-environmental model as a decision-making tool for beach management which, based on advance predictions of bathing water quality, can inform beach managers on appropriate management …

An Overview Of The Development Of Cement-Based Batteries For The Cathodic Protection Of Embedded Steel In Concrete, Aimee Byrne, Niall Holmes, Brian Norton

Conference papers

This paper presents an overview of the cement-based batteries developed in DIT for use in the cathodic protection of embedded steel in reinforced concrete undergoing chloride-induced corrosion. Cathodic protection delivers an external current (approximately 20mA per m2 of embedded steel) which effectively polarises the internal current generated during corrosion. The batteries developed in DIT comprise of a cement-based electrolyte containing different additives including sand, aggregate, salts, carbon black and plasticiser with protruding anode and cathode metal plates. These batteries produced an initial electrical output of 1.5V and 23mA through a 10 resistor as measured using data acquisition units and a …

Evaluating A New Cem Iii/A Cement For Concretes Exposed To Harsh Acid Rich Environments, David Thompson, Niall Holmes, John Reddy

Conference papers

The Irish Annex to the European specification, performance, production and conformity of concrete, IS EN 206, recommends CEM III/B cement for acid rich environments containing between 66 to 80% GGBS. However, BS 8500, the UK annex to EN 206 and the British Research Establishment (BRE) Special Digest 1, recommends CEM III/A cement with a GGBS range of 36-65%. This project investigated the performance of a new CEM III/A cement produced by Ecocem Ireland in concretes exposed to such environments using an extensive suite of laboratory tests.

In Ireland, up to €5.8bn will be invested to provide fresh drinking water and …

Using Photovoltaics To Power Electrochemical Chloride Extraction From Concrete, Sean Bond, Lynette O'Callaghan, Niall Holmes Dr., Brian Norton

Conference papers

Corrosion of embedded steel in reinforced concrete (RC) is a world-wide problem, that reduces structural performance and lifespan. Chloride attack may be a result of seawater, de-icing salts or contaminated admixtures, brought on by ingress of chlorides into the concrete. Electrochemical Chloride Extraction (ECE) is a non-destructive treatment for contaminated RC structures, that due to uncertainty of treatment times and applied current densities, is only 50% effective. It is often diesel powered has an environmental impact and often very costly due to the long treatment times. To improve the efficiency of ECE the influences of concrete resistance, cement type and …

Structural Control Of Wind Turbines With Soil Structure Interaction Included, Breiffni Fitzgerald, Biswajit Basu

Articles

The importance of considering soil structure interaction in structural control of wind turbines is investigated in this paper. An Euler–Lagrangian wind turbine mathematical model based on an energy formulation was developed for this purpose which considers the structural dynamics of the system and the interaction between in-plane and out-of-plane blade vibrations. Also, the interaction between the blades and the tower including a tuned mass damper (TMD) is considered. The turbine is subject to turbulent aerodynamic loading simulated using a modification to the classic Blade Element Momentum (BEM) theory with turbulence generated from rotationally sampled spectra. The turbine is also subject …

Case Studies Of Cavity And External Wall Insulation Retrofitted Under The Irish Home Energy Saving Scheme: Technical Analysis And Occupant Perspectives, Aimee Byrne, Gerard Byrne, Garrett O'Donnell, Anthony Robinson

Articles

The residential sector represents 27% of primary energy consumption in Ireland. This paper examines the case study of the Irish government’s national grant scheme to encourage energy efficiency retrofit in private housing. That is the Home Energy Saving (HES) Scheme, later rebranded the Better Energy: Homes (BEH) Scheme. The methodology involved monitoring several homes immediately before and after retrofit alongside discussions with occupants. The examination focused on specific measures commonly introduced through the HES/BEH programme − cavity and external wall insulation. It has been found that a significant decrease in heat loss through the walls was measured in all cases. …

Bs News January/February

Building Services Engineering

No abstract provided.