Civil Engineering Commons^™

Statistical Analysis For Water Quality Data Using Anova (Case Study- Lake Burullus Influent Drains), Mohamed Hussein Hegazy

Civil Engineering

Lake Burullus is considered one of the most valuable northern lakes in Egypt due to its unique ecological system and special location. Over the past four decades, the lake has suffered from high contamination levels due to expansion in fish farming and increasing of agricultural drainage water entering the southern side of the lake through eight influent drains. This research aims to assess the current situation of the lake’s influent drains. For this purpose, two types of statistical analysis, Mean average method, and Analysis of Variance (ANOVA) were used. The water quality conditions for six major drains (Therah (Tira), Nashart, …

The Utilization Of Repurposed Whole Textiles To Modify The Mechanical And Hydrogeological Soil Properties: Green Media, Angelis Almanzar-Chevalie, Yehya Elfgeeh, Calvin O. Walters Jr.

Publications and Research

The utilization of repurposed whole textiles to modify the mechanical and hydrogeological soil properties investigates the impact of adding repurposed textiles to lightweight engineered soil, documenting changes in unit weight, water content, and hydraulic conductivity. This study builds upon prior findings, which demonstrated significant alterations in hydrogeological properties when incorporating textile fabric (3% by weight at an aspect ratio of 1:1). Functioning as reinforcement, these fibers enhance the soil's strength, stability, and structural integrity—especially advantageous in erosion-prone areas, regions susceptible to landslides, or locations requiring heightened load-bearing capacity. The outcomes of this parametric study lead to green roof farms playing …

International Information Management And Bim Best Practice Report, Ted Mckenna, Davitt Lamon

Reports

In order to inform the Digital Leadership and Cultural Change pillar of the Build Digital, a study of international best practice in digital adoption within the built environment sector globally was undertaken and is presented here-in. In order to identify key learnings for Ireland in the context of digital transformation, eight countries were included in this study, namely, Denmark, Finland, Netherlands, Germany, United Kingdom (UK), New Zealand, Australia and Singapore. These countries were selected for various reasons, including the level of digital maturity, the scale of the built environment sector and geographic spread. Key data for each country is included …

Sustainability And Circular Economy Horizon Scan And Needs Analysis, Sadaf Dalirazar, Mark Kelly, Derek Sinnott, James O'Donnell

Reports

The construction industry plays a crucial role in addressing the climate crisis as it is the largest global consumer of raw materials and contributes significantly to global energy consumption and emissions. Considering the world’s continuous population growth and the imperative to address infrastructure and housing demands the construction sector needs to adopt further sustainable strategies in its activities to reduce the pressure on natural resources. In addition, the Architecture, Engineering, and Construction (AEC) sector is responsible for generating substantial amount of waste known as Construction and Demolition Waste (CDW), which is projected to increase due to the future construction developments. …

Information Management And Bim Standards And Supports Inventory, Ryan Dempsey, Barry Mcauley, David Burke

Tools

The Digital Standards pillar consists of industry experts who champion the benefits of common rules, guidelines, and workflows that facilitate the improvement of information flow and information management across asset life cycles. Digital standards provide a common language that can be translated to technical specifications enabling clients, designers, contractors, and facilities managers, irrespective of their preferred tools, to communicate efficiently and reduce cost, rework, and disputes. Working closely with the Digital Procurement and Digital Education and Training pillars, this pillar is developing and delivering Irish Information Management/BIM (Digital Construction) guidelines for the sector.

This report summarises existing digital construction standards, …

Digital Construction Annual Survey 2022 Report, Davitt Lamon, Ted Mckenna

Reports

The Annual Survey 2022 was conducted to assess the state of digital transformation in the Irish construction and built environment sector. This report presents the analysis of survey data, with a focus on implications for the Build Digital project and Build Digital’s five pillars: Digital Leadership & Cultural Change, Digital Standards, Digital Education & Training, Digital Procurement, and Sustainability & Circular Economy. Key findings from the survey indicated that a significant number of organisations have started their digital transformation journey, with many identifying themselves as proactive and possessing a clear business-focused strategy. However, a considerable cohort of respondents are keen …

Augmenting External Surface Pressures’ Predictions On Isolated Low-Rise Buildings Using Cfd Simulations, Md Faiaz Khaled, Aly Mousaad Aly

Faculty Publications

The aim of this paper is to enhance the accuracy of predicting time-averaged external surface pressures on low-rise buildings by utilizing Computational Fluid Dynamics (CFD) simulations. To achieve this, benchmark studies of the Silsoe cube and the Texas Tech University (TTU) experimental building are employed for comparison with simulation results. The paper is structured into three main sections. In the initial part, an appropriate domain size is selected based on the precision of mean pressure coefficients on the windward face of the cube, utilizing Reynolds Averaged Navier-Stokes (RANS) turbulence models. Subsequently, recommendations regarding the optimal computational domain size for an …

Unhsc Performance Curve Calculator 3.0, Daniel Macadam

UNH Stormwater Center

No abstract provided.

An Open-Source, Semisupervised Water End-Use Disaggregation And Classification Tool, Nour A. Attallah, Jeffery S. Horsburgh, Camilo J. Bastidas Pacheco

Research Briefs

Research Objective/Summary: Research on individual household water consumption is vital to water management and conservation approaches. Despite a significant number of papers published on end-use disaggregation tools, reproduction and further study of results on water-use behavior is difficult because the data and code are not easily accessible. In order to fulfill this need for open and reproducible tools, we present a new, semisupervised, non-intrusive water end-use disaggregation and classification tool.

Using Bim To Increase The Efficiency Of Energy-Driven Retrofitting Projects, Anne Grego, Shannon Chance, Barry Mcauley

Conference Papers

The building sector is responsible for nearly 40% of global energy consumption. Many existing buildings have poor thermal insulation and low energy performance, hindering sustainability goals. Energy-driven building retrofitting could address this issue and implementing Building Information Modelling (BIM) in retrofitting can reduce process time, costs, and waste associated with such undertakings. Yet, there is a lack of research and insufficient guidance for implementing BIM in energy-driven retrofitting. A BIM framework is presented to enhance decision-making processes during retrofitting. The aims of this study were to (1) identify BIM technologies and methodologies that could address existing barriers and improve efficiency …

Columbus, Nebraska: Southern Housing Development Design Proposal, Ryan Weyers, Caiden Dynek, Alex Papa, Brexton Robertson, Kaden Perala

Honors Theses

The following paper proposes the design and creation of a new housing development in the city of Columbus, Nebraska in a lot to the south of the city and directly north of the Columbus wastewater treatment plant. The goal of this proposal is to provide readers with confidence that our company is the most qualified to complete the project and will create the safest, most comfortable, most efficient, and most cost-effective final design. This proposal seeks to offer a solution to the lack of affordable housing for the growing workforce in Columbus. In order to arrive at this solution, each …

Unhsc Performance Curve Calculator 2.4, Daniel Macadam

UNH Stormwater Center

No abstract provided.

Properties Of Cement Mortar Containing Recycled High-Density Polyethylene (Hdpe), Amany G. Micheal Prof., Esraa Torky, Merna Amir

Centre for Advanced Materials

Millions of tones of plastic waste are generated globally and only less than 10 per cent has been recycled. It is crucial to segregate and circulate plastic waste and repurposing it for countless other uses. There are many ways to repurpose and reuse these discarded plastics. One use that can be examined is the use of plastic as partial sand replacement in mortar. To contribute to this important and valid discourse, the research studies the mechanical and thermal properties of recycled HDPE mortar as an active way of integrating plastic waste into the construction industry to partially eliminate some of …

Hdd Dataset: Optimising Retrofitted Insulation For Irish Residential Building Walls, Rakshit D. Muddu, Aimee Byrne, Anthony James Robinson

Datasets

In this study, a thermal-economic analysis was conducted to determine the optimum insulation thickness of retrofitted insulation walls in different regions in Ireland. This was based on the Heating Degree Day method (HDD). This dataset contains optimum insulation thickness, payback period, cost savings and carbon emission for all 25 counties in the Republic of Ireland

Survey Data: Optimising Retrofitted Insulation For Irish Residential Building Walls, Rakshit D. Muddu, Aimee Byrne, Anthony Robinson Dr.

Datasets

A survey was conducted to determine the preferred set point temperature and heating pattern among Irish households. The survey was sent to 237 people living across Ireland, out of which 32 respondents skipped the survey and 9 surveys were found to be incomplete. Amongst the counties in Ireland 71.1% respondents were from Dublin, 6.34% from Kildare, 5% from Meath, 5% from Wicklow and in all the remaining counties response rate was below 2%. Part 1: This section of the survey recorded information regarding characteristics of the building such as house type, wall type, insulation type, period the house was built. …

The Living Breakwaters Pdr Efforts Econcrete Resource Analysis, Guianina Ferrari, Shervon Stephens, Calvin O. Walters Jr.

Publications and Research

On October 29, 2012, Superstorm Sandy impacted 443,000 people and caused nearly $19 billion (about $58 per person in the US) worth of damage within New York City. As part of the New York City infrastructure reparation plan, the Living Breakwaters project in Tottenville addressed coastal resilience, allocating $100M of public funds to a series of artificial breakwaters by the southwest coast of Staten Island. Each breakwater is constructed and designed to mitigate water flow in storm events. ECOncrete, a primary element of the breakwater, is a specialty cast cementitious product that is marine organism-friendly that encourages biocalcification and photosynthesis. …

Investigation Of Mechanical Properties Of Recycled Fiber-Reinforced Polymer Composites Reinforcing Cement, Caleb Mull, Fnu Archie, Harry Lee, Guyuan Zhang

Discovery Undergraduate Interdisciplinary Research Internship

The usage of fiber-reinforced polymer composites in various fields has increased significantly due to their advantageous physical and mechanical properties. However, the sustainability of composite parts has not been fully solved for a long time. Most end-of-life (EOL) composite parts have been landfilled without recycling due to the recycling cost and lack of application of recycled composites. Mechanical composite recycling that shred the EOL composite part and reuse it for downgraded applications is one of the most commonly used recycling processes for the EOL composite part. In this research, mechanical composite recycling process was demonstrated for the construction application. The …

Minimizing Surface Run-Off, Improving Underground Water Recharging, And On-Site Rain Harvesting In The Kathmandu Valley, Ambika P. Adhikari, Keshav Bhattarai

Himalayan Research Papers Archive

Nepal's political institutions and administrative units were thoroughly restructured in 2015 with the promulgation of the new Constitution. Several rural areas were combined to meet the definition of urban threshold criteria to classify rural areas into urban categories. Accordingly, over 3,900 local political and administrative units were amalgamated into 753 units, of which, 293 units are classified as urban. Within these newly defined urban areas, many natural environments have been converted into impervious surfaces such as paved roads, sidewalks, and building roofs. These impervious surfaces have drastically increased the amount of surface run-offs-often termed as "urban floods"--under increasing precipitation caused …

Optimising Existing Digital Workflow For Structural Engineering Organisations Through The Partnering Of Bim And Lean Processes, John Mclaughlin, Barry Mcauley

Conference Papers

Building Information Modelling (BIM) is now seen as one of the leading transformative processes within the Architectural, Engineering and Construction (AEC) sector and has the potential to assist in streamlining the structural design process. However, its practical implementation can often add another layer to the existing workflow and can result, to its detriment, in the primary objective of optimising structural workflows being hindered. This can lead to structural organisations producing 3D models in tandem with traditional drawings, a lack of human intervention regarding software interoperability, and a reluctance to move away from conventional work methods. This paper will explore how …

Implementation Of Secondary And Tertiary Treated Wastewater In Concrete Manufacturing, Amany G. Micheal Prof., Haidy Abdel Salam, Gouda Ghanem

Civil Engineering

Water scarcity is a problem that faces many regions. In a developing and arid country like Egypt, the need for freshwater is exponentially increasing. This research is an evaluation of the recycled wastewater to be used in concrete manufacturing. The treated wastewater is blended with potable water with percentages of 25%, 50%, and 100%. The mixture of the two types of water is used in concrete mixing and curing. Control specimens with pure potable water are cast for comparison. The setting time for Ordinary Portland Cement is tested using the different water mixes. The hardened concrete is tested in compression …

Efficiency Of Bank Filtration In The Removal Of Cyanotoxins Under Different Levels Of Nutrients, Luke Walkenhorst

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Harmful Algal Blooms (HABs) are an increasing concern not only in Nebraska, but across the world. Increasing global temperatures in conjunction with overuse of synthetic fertilizers are leading causes to the increasing frequency and concern of HABs. In the present work, the effectiveness of simulated bank filtration (BF), as an economical water treatment option, to remove cyanotoxins under different levels of nutrients (nitrates and phosphates) was investigated. Vertical flow-through columns pre-acclimated with two levels of nutrients (e.g., nitrate and phosphate—10 vs. 50 mg/L) were exposed to two different levels of cyanotoxins (10 vs. 75 μg/L). Results from the study confirmed …

Hydrodynamic Limitations To Mangrove Seedling Retention In Subtropical Estuaries, Kelly M. Kibler, Christian Pilato, Linda Walters, Melinda Donnelly, Jyotismita Taye

Flow-biota Interaction and Natural Infrastructure Design

Mangrove forest sustainability hinges upon propagule recruitment and seedling retention. This study evaluates biophysical limitations to mangrove seedling persistence by measuring anchoring force of two mangrove species (Rhizophora mangle and Avicennia germinans). Anchoring force was measured in 362 seedlings via lateral pull-tests administered in mangrove forests of two subtropical estuaries and in laboratory-based experiments. Removal mechanism varied with seedling age: newly-established seedlings failed due to root pull-out while seedlings older than 3 months failed by root breakage. Anchoring force of R. mangle seedlings was consistently and significantly greater than A. germinans (GLM: p = 0.002), however force to …

The Living Breakwaters Pdr Efforts: Conceptual Scheduling, Calvin O. Walters Jr.

Publications and Research

On October 29, 2012, Superstorm Sandy caused nearly $19 billion in damages in New York City including 69,000 residential units across the five boroughs. This disaster precipitated a post-disaster-rebuilding (PDR) project including roughly $4.2 billion in a Community Development Block Grant allocated towards PDR projects. A portion of the grant was used to construct a living breakwater in Tottenville, Staten Island, consisting of a resiliency approach to risk reduction through erosion prevention, wave energy attenuation, and enhancement of ecosystems and social resiliency to improve resistance to storms for the community of Tottenville. The ridges of each breakwater are designed with …

Hydrodynamic Signatures Of Recreational Boat Wakes And Their Influence To Sediment Entrainment Along The Shoreline Of A Shallow Estuary, Kelly M. Kibler

Predicting Boat Wake Bank Erosion Risk

Wave energy from recreational boat wakes is associated with erosion and degradation of shoreline ecotones. However, wake effects are often assumed to be negligible when boating lanes are located far from shore. In this study, field experiments were conducted to characterize hydrodynamics of recreational boat wakes at the shoreline of a shallow estuary as offshore sailing-line distance varied from 50 to 200m. Results indicate that wake events were considerably more energetic than ambient conditions, with an average 20% increase in wave height, 190% increase in near-bed orbital velocity, and 110% increase in wave-induced shear stress. Wake events generated farther from …

Implementation Of Secondary And Tertiary Treated Wastewater In Concrete Manufacturing, Amany G. Micheal Prof., Haidy Abd El Salm, Gouda Ghanem Prof.

Centre for Advanced Materials

Water scarcity is a problem that faces many regions. In a developing and arid country like Egypt, the need for freshwater is exponentially increasing. This research is an evaluation of the recycled wastewater to be used in concrete manufacturing. The treated wastewater is blended with potable water with percentages of 25%, 50%, and 100%. The mixture of the two types of water is used in concrete mixing and curing. Control specimens with pure potable water are cast for comparison. The setting time for Ordinary Portland Cement is tested using the different water mixes. The hardened concrete is tested in compression …

Influence Of Foundation Damping On Offshore Wind Turbine Monopile Design Loads, Wystan Carswell, Sanjay R. Arwade, Jörgen Johansson, Don J. Degroot

Publications

The dynamic behavior of offshore wind turbines (OWTs) must be designed considering stochastic load amplitudes and frequencies from waves and mechanical loads associated with the spinning rotor during power production. The proximity of the OWT natural frequency to excitation frequencies combined with low damping necessitates a thorough analysis of sources of damping; of these sources of damping, least is known about the contributions of damping from soil-structure interaction (foundation damping). This paper studies the influence of foundation damping on cyclic load demand for monopile-supported OWTs considering the design situations of power production, emergency shutdown, and parked conditions. The NREL 5 …

North 14th Street Corridor Improvements Project, Ashley Nguyen, Samantha Corey, Maricela Paramo Reyes, Pooja Rajeev

Honors Theses

The following project report was a study of the North 14^th Street corridor ranging from Adams Street to Virginia Street conducted by University of Nebraska-Lincoln students for a senior design capstone project. Main focuses of the project were the intersection of Adams and 14^th Street and the 14^th Street bridges over Cornhusker Highway and Oak Creek. Study of this area included work in transportation, traffic, structural, geotechnical, water resources, and environmental engineering. However, this report done by students should not take the place of work done by licensed professional engineers.

This project was done in collaboration with …

Maximum Profit Facility Location And Dynamic Resource Allocation For Instant Delivery Logistics, Darshan Chauhan, Avinash Unnikrishnan, Stephen D. Boyles

Civil and Environmental Engineering Faculty Publications and Presentations

Increasing e-commerce activity, competition for shorter delivery times, and innovations in transportation technologies have pushed the industry toward instant delivery logistics. This paper studies a facility location and online demand allocation problem applicable to a logistics company expanding to offer instant delivery service using unmanned aerial vehicles or drones. The problem is decomposed into two stages. During the planning stage, the facilities are located, and product and battery capacity are allocated. During the operational stage, customers place orders dynamically and real-time demand allocation decisions are made. The paper explores a multi-armed bandit framework for maximizing the cumulative reward realized by …

Arise (Certcoin)- Inspiring Demand For Sustainable Energy Skills, Barry Mcauley, Paul Mccormack, Andrew Hamilton, Eduardo Rebelo

Conference papers

The European AEC Sector now faces impending challenges over the next decade concerning escalating climate targets. To reach these targets, it vital that the green economy deliver a better-skilled workforce and develops new competencies and methods of working. Training in the domain of digital construction technologies and processes, such as Building Information Modelling (BIM), are now seen as essential upskilling vehicles that must be embraced if the sector is to transition towards a greener agenda. To assist in meeting these training needs a selection of partners from the BIM EPA will partake in the Horizon 2020 ARISE project, aiming to …

An Exploration Of Lean And Bim Synergies With A Focus On Smes In Construction, Barry Mcauley, Marina Andreou, Alan V. Hore, Avril Behan

Conference papers

Small and Medium Enterprises (SME) account for 99.7% of the Irish Construction Industry and contribute to 68% of all employment in the sector. These organisations now find themselves facing the challenge of returning to productive business post the Covid 19 shutdown. More than ever, SMEs must modernise and adapt their business models to embrace new ways of working, such as Lean Construction and Building Information Modelling (BIM), in the absence of clear business incentives. It has proved difficult to persuade SMEs to change their ways of working due to limited finances, internal resources and above all, the cultural shift required …