Civil Engineering Commons^™

International Information Management And Bim Best Practice Report, Ted Mckenna, Davitt Lamon

Reports

In order to inform the Digital Leadership and Cultural Change pillar of the Build Digital, a study of international best practice in digital adoption within the built environment sector globally was undertaken and is presented here-in. In order to identify key learnings for Ireland in the context of digital transformation, eight countries were included in this study, namely, Denmark, Finland, Netherlands, Germany, United Kingdom (UK), New Zealand, Australia and Singapore. These countries were selected for various reasons, including the level of digital maturity, the scale of the built environment sector and geographic spread. Key data for each country is included …

Sustainability And Circular Economy Horizon Scan And Needs Analysis, Sadaf Dalirazar, Mark Kelly, Derek Sinnott, James O'Donnell

Reports

The construction industry plays a crucial role in addressing the climate crisis as it is the largest global consumer of raw materials and contributes significantly to global energy consumption and emissions. Considering the world’s continuous population growth and the imperative to address infrastructure and housing demands the construction sector needs to adopt further sustainable strategies in its activities to reduce the pressure on natural resources. In addition, the Architecture, Engineering, and Construction (AEC) sector is responsible for generating substantial amount of waste known as Construction and Demolition Waste (CDW), which is projected to increase due to the future construction developments. …

Information Management And Bim Standards And Supports Inventory, Ryan Dempsey, Barry Mcauley, David Burke

Tools

The Digital Standards pillar consists of industry experts who champion the benefits of common rules, guidelines, and workflows that facilitate the improvement of information flow and information management across asset life cycles. Digital standards provide a common language that can be translated to technical specifications enabling clients, designers, contractors, and facilities managers, irrespective of their preferred tools, to communicate efficiently and reduce cost, rework, and disputes. Working closely with the Digital Procurement and Digital Education and Training pillars, this pillar is developing and delivering Irish Information Management/BIM (Digital Construction) guidelines for the sector.

This report summarises existing digital construction standards, …

Digital Construction Annual Survey 2022 Report, Davitt Lamon, Ted Mckenna

Reports

The Annual Survey 2022 was conducted to assess the state of digital transformation in the Irish construction and built environment sector. This report presents the analysis of survey data, with a focus on implications for the Build Digital project and Build Digital’s five pillars: Digital Leadership & Cultural Change, Digital Standards, Digital Education & Training, Digital Procurement, and Sustainability & Circular Economy. Key findings from the survey indicated that a significant number of organisations have started their digital transformation journey, with many identifying themselves as proactive and possessing a clear business-focused strategy. However, a considerable cohort of respondents are keen …

Using Bim To Increase The Efficiency Of Energy-Driven Retrofitting Projects, Anne Grego, Shannon Chance, Barry Mcauley

Conference Papers

The building sector is responsible for nearly 40% of global energy consumption. Many existing buildings have poor thermal insulation and low energy performance, hindering sustainability goals. Energy-driven building retrofitting could address this issue and implementing Building Information Modelling (BIM) in retrofitting can reduce process time, costs, and waste associated with such undertakings. Yet, there is a lack of research and insufficient guidance for implementing BIM in energy-driven retrofitting. A BIM framework is presented to enhance decision-making processes during retrofitting. The aims of this study were to (1) identify BIM technologies and methodologies that could address existing barriers and improve efficiency …

Hdd Dataset: Optimising Retrofitted Insulation For Irish Residential Building Walls, Rakshit D. Muddu, Aimee Byrne, Anthony James Robinson

Datasets

In this study, a thermal-economic analysis was conducted to determine the optimum insulation thickness of retrofitted insulation walls in different regions in Ireland. This was based on the Heating Degree Day method (HDD). This dataset contains optimum insulation thickness, payback period, cost savings and carbon emission for all 25 counties in the Republic of Ireland

Survey Data: Optimising Retrofitted Insulation For Irish Residential Building Walls, Rakshit D. Muddu, Aimee Byrne, Anthony Robinson Dr.

Datasets

A survey was conducted to determine the preferred set point temperature and heating pattern among Irish households. The survey was sent to 237 people living across Ireland, out of which 32 respondents skipped the survey and 9 surveys were found to be incomplete. Amongst the counties in Ireland 71.1% respondents were from Dublin, 6.34% from Kildare, 5% from Meath, 5% from Wicklow and in all the remaining counties response rate was below 2%. Part 1: This section of the survey recorded information regarding characteristics of the building such as house type, wall type, insulation type, period the house was built. …

Optimising Existing Digital Workflow For Structural Engineering Organisations Through The Partnering Of Bim And Lean Processes, John Mclaughlin, Barry Mcauley

Conference Papers

Building Information Modelling (BIM) is now seen as one of the leading transformative processes within the Architectural, Engineering and Construction (AEC) sector and has the potential to assist in streamlining the structural design process. However, its practical implementation can often add another layer to the existing workflow and can result, to its detriment, in the primary objective of optimising structural workflows being hindered. This can lead to structural organisations producing 3D models in tandem with traditional drawings, a lack of human intervention regarding software interoperability, and a reluctance to move away from conventional work methods. This paper will explore how …

Arise (Certcoin)- Inspiring Demand For Sustainable Energy Skills, Barry Mcauley, Paul Mccormack, Andrew Hamilton, Eduardo Rebelo

Conference papers

The European AEC Sector now faces impending challenges over the next decade concerning escalating climate targets. To reach these targets, it vital that the green economy deliver a better-skilled workforce and develops new competencies and methods of working. Training in the domain of digital construction technologies and processes, such as Building Information Modelling (BIM), are now seen as essential upskilling vehicles that must be embraced if the sector is to transition towards a greener agenda. To assist in meeting these training needs a selection of partners from the BIM EPA will partake in the Horizon 2020 ARISE project, aiming to …

An Exploration Of Lean And Bim Synergies With A Focus On Smes In Construction, Barry Mcauley, Marina Andreou, Alan V. Hore, Avril Behan

Conference papers

Small and Medium Enterprises (SME) account for 99.7% of the Irish Construction Industry and contribute to 68% of all employment in the sector. These organisations now find themselves facing the challenge of returning to productive business post the Covid 19 shutdown. More than ever, SMEs must modernise and adapt their business models to embrace new ways of working, such as Lean Construction and Building Information Modelling (BIM), in the absence of clear business incentives. It has proved difficult to persuade SMEs to change their ways of working due to limited finances, internal resources and above all, the cultural shift required …

Digital Construction And Bim Research In Ireland 2016-2020, Barry Mcauley, Roger P. West, Alan V. Hore

Conference papers

As the construction industry opens up post pandemic, new and significant challenges will demand considerable expertise, not least in financial viability, solving the housing crisis and facing the very significant climate change pressures to make the industry less wasteful and less carbon intensive. This presents an excellent opportunity to further inculcate aspects of lean construction, particularly BIM into many aspects of construction not traditionally associated with digital construction, provided the necessary expertise is available and known to exist. Following a well-received recent conference paper summarising BIM-related research published by academics in Ireland’s higher education institutions in 2020, this paper will …

Optimisation Of Retrofit Wall Insulation: An Irish Case Study, Rakshit D. Muddu, D M. Gowda, Anthony James Robinson, Aimee Byrne

Articles

Ireland has one of the highest rates of emissions per capita in the world and its residential sector is responsible for approximately 10% of total national CO2 emissions. Therefore, reducing the CO2 emissions in this sector will play a decisive role in achieving EU targets of reducing emissions by 40% by 2030. To better inform decisions regarding retrofit of the existing building stock, this study proposes Optimum Insulation Thicknesses (OIT) for typical walls in 25 regions in Ireland. The calculation of OIT includes annual heat energy expenditure, CO2 emissions, and material payback period. The approach taken is based on Heating …

A Critical Examination Of Visual Programming And Generative Design For The Compliance Checking Of Open Plan Office Layouts Against Hse Guidelines Post Covid-19., Bim Tudublin, Ronan Byrne

Capstone Reports

The purpose of this study is to explore the feasibility of Visual Programming (VP) and Generative Design (GD) in assisting employers review open plan office layouts against Ireland’s HSE guidelines implemented in May 2020 in response to Covid-19. The pandemic has affected all areas of life with workplace standards requiring a complete overhaul. This study will attempt to ascertain compliance with natural ventilation and social distancing requirements through the completion of an experimental research study, utilising Computational Design (CD) tools. A GD study will be undertaken to provide the designer with numerous office layout design solutions to evaluate and evolve. …

Opportunities In The Irish Reinforced Concrete Industry For Lean And Bim Adoption, Bim Tudublin, Kieran Mcconnell

Capstone Reports

The Irish Reinforced Concrete (RC) sector has yet to realise the full potential of Building Information Modelling (BIM) and Lean construction. The positive impacts and benefits of both BIM and Lean in the wider Architecture, Engineering and Construction sector are widely recognised; many of these are transferable to the RC sector, but there is limited research and knowledge on practical transference, uses and advantages. This research aims to fill some of the existing knowledge gaps by examining BIM and Lean adoption and awareness in the Irish RC sector across sub-sectors, professions, and organisational levels, and by exploring opportunities for increasing …

To What Extent Can Lean Construction Processes And Principles Be Utilised In The Design Stage Of A Bim Project In The Irish Design And Construction Industry, Bim Tudublin, Barry Sheramn

Capstone Reports

Although different in many ways, Building Information Modelling (BIM) and Lean Construction are two processes that are having a significant impact on the Design & Construction Industry. In recent years, the Irish AECO industry has seen a tenfold increase across numerous construction disciplines with the adoption of new workflows and processes centred around both BIM and Lean methodologies. Existing literature identifies a strong synergistic relationship between the two processes and highlights the opportunity for Lean processes and principles to be implemented into the design stage workflow. This paper investigated existing literature relating to several lean processes currently implemented in the …

Should Acoustic Simulation Technology Be Utilised In Architectural Practice? Does It Have The Potential For Bim Integration?, Bim Tudublin, Keith Harvey

Capstone Reports

The research presented in this paper, firstly, aims to convey the importance of our acoustic environment through focusing on the effects of undesirable acoustic conditions on cognitive abilities in spaces where cognitive performance is of the utmost concern, our learning environments. Secondly, it aims to investigate current state-of-the-art acoustic simulation methods, available platforms, and their levels of interoperability with architectural BIM authoring software. Structured interviews were carried out with 7 Irish architects and architectural technologists to determine if a disconnection between architectural design and acoustic performance exists and to identify the advantages and disadvantages of current workflows for acoustic performance …

A Novel Self-Healing System: Towards A Sustainable Porous Asphalt, Shi Xu, Xueyan Liu, Amir Tabakovic, Erik Schlangen

Articles

Self-healing asphalt, aimed to produce a sustainable asphalt pavement using green technology, has been studied in the past two decades. Technologies including encapsulated rejuvenator and induction heating have been proposed, demonstrated in the laboratory, and gradually evaluated in field application. This paper looks into the synergy effect of the above two technologies, where induction heating serves as the asphalt damage repair mechanism, requiring just 2 min heating time and encapsulated rejuvenator will replenish (rejuvenate) aged asphalt binder and reinstate bitumen’s healing ability. Moreover, the increased temperature from induction heating could in turn accelerate the diffusion process of rejuvenator into aged …

Sustainable And Resilient Construction: Current Status And Future Challenges, Niamh Murtagh, Lloyd Scott, Jingli Fan

Articles

The construction industry globally is one of the most environmentally damaging of sectors. Additionally, the resources consumed and the operational energy requirements of buildings are ‘locked-in’, potentially for decades. The Intergovernmental Panel on Climate Change has recognised construction as a sector in which significant improvements can, and indeed must, be made. But the industry is often argued to be unique, in its multiplicity of stakeholders, transient organisational structures, avoidance of risk and impact on society. The current Virtual Special Issue (VSI) sought to bring together a collection of papers on progress and potential for improvement in the construction sector, in …

A Comparative Study Of Cadworx Plant 2018 And Revit 2020 With Ez-Iso Add-In, For The Production Of Piping Isometrics, Bim Tudublin, Killian Lynch

Capstone Reports

BIM software evaluation and selection is a complex process. In this paper, a comparative study of Revit 2020 with Ez-ISO add-in, and CADWorx Plant 2018, was carried out. The aim of this study was to determine if a MEP contractor could consolidate software usage into one package, thereby reducing costs for pipework modelling and isometric production. A comprehensive evaluation was developed based on a literature review. A multicriteria decision-making method was used in conjunction with the software evaluation to ensure sound choices were made. An online survey of senior BIM professionals was conducted to validate the analysis and findings. The …

Steel Model Approval: Can Bim Provide A Drawing-Free Approval Process?, Bim Tudublin, David Reynolds

Capstone Reports

Despite widespread use of Building Information Modelling (BIM) software used within their industry, the approval of steelwork contractor’s design information is largely based on the approval of 2d-drawings. These workflows can be modernised to take advantage of current technology and provide productivity gains, but barriers to change exist. This research is an attempt to answer the research question of if a model-based approval process, which removes the need for drawings, is achievable. To answer this question, a mixed methodology was used. A literature review was performed to understand how the approval process works, what information is required and what BIM …

A Critical Examination Of The Use Of Business Intelligence (Bi) In The Optioneering Of Generative Design Models: A Case Study., Bim Tudublin, Davitt Lamon

Capstone Reports

This research outlines the development of a generative des ign workflow for the architectural space planning of a 1,200 sq.m office located in Dublin, Ireland, and the application of statistical analysis and data visualisation for the optioneering of gen erated models. First, the paper defines a computational desig n model with the potential to generate a variety of office layouts, including circulation routes and desk locations. It then identifies three unique performance metrics that evaluate each design option. Finally, the study applies a multi objective genetic algorithm (MOGA) to explore the high dimensional design space of all potential options and …

Advancement Of Predictive Modeling Of Zeta Potentials (Ζ) In Metal Oxide Nanoparticles With Correlation Intensity Index (Cii), Andrey A. Toropov, Natalia Sizochenko, Alla P. Toropova, Danuta Leszczynska, Jerzy Leszczynski

Articles

It was expected that index of the ideality of correlation (IIC) and correlation intensity index (CII) could be used as possible tools to improve the predictive power of the quantitative model for zeta potential of nanoparticles. In this paper, we test how the statistical quality of quantitative structure-activity models for zeta potentials (ζ, a common measurement that reflects surface charge and stability of nanomaterial) could be improved with the use of these two indexes. Our hypothesis was tested using the benchmark data set that consists of 87 measurements of zeta potentials in water. We used quasi-SMILES molecular representation to take …

Tracing Sources Of Natural Organic Matter, Trihalomethanes And Metals In Groundwater From A Karst Region, Connie O'Driscoll, Eoin Mcgillicuddy, Peter Croot, Pamela Bartley, John Mcmyler, Jerome Sheahan, Liam Morrison

Articles

Groundwater offers an important source for drinking water around the world; however, groundwater quality is under increasing pressure and is particularly vulnerable in karst areas. Total organic carbon (TOC) is significantly related to groundwater quality and when not removed by water treatment processes can give rise to the formation of disinfection by-products trihalomethanes (THMs) above the level of compliance. This study investigated the source of organic matter giving rise to the THM exceedances in a groundwater supply in a karst area. Results highlighted that source water for this groundwater supply was prone to surface water infiltration linked to rainfall events; …

The Viability Of Organic Dyes In Luminescent Down-Shifting Layers For The Enhancement Of Si Solar Cell Efficiency, Aaron Glenn, Conor Mcloughlin, Hind Ahmed, Hoda Akbari, Subhash Chandra, Sarah Mccormack

Articles

The main energy losses in solar cells are related to spectral losses where high energy photons are not used efficiently, and energy is lost via thermalization which reduces the solar cell’s overall efficiency. A way to tackle this is to introduce a luminescent down-shifting layer (LDS) to convert these high energy photons into a lower energy bracket helping the solar cell to absorb them and thus generating a greater power output. In this paper, lumogen dye Violet 570 has been used as LDS coated films of 10μm and 60μm placed on top of Si solar cells. The dye was incorporated …

Improving The Sustainability Of The Built Environment By Training Its Workforce In More Efficient And Greener Ways Of Designing And Constructing Through The Horizon2020 Bimcert Project, Barry Mcauley, Avril Behan

Conference papers

The construction industry consumes up to 50% of mineral resources excavated from nature, generates about 33% of CO2 present in the atmosphere and is responsible for 40% of total global energy through both construction and operation of buildings. The realisation that current pervasive construction practices now face globalization, sustainability, and environmental concerns, as well as ever-changing legislation requirements and new skills needed for the information age has resulted in technologies such as Building Information Modelling (BIM) becoming a key enabler in navigating these barriers. To assist in overcoming these barriers, a number of funding initiatives have been put in place …

Centres Of Excellence And Roadmaps For Digital Transition: Lessons For Ireland’S Construction Industry, Barry Mcauley, Alan Hore, Roger West

Conference papers

Like most sectors in today’s working world, construction businesses are challenged to work in an increasingly digitised world with sophisticated demands from intelligent clients. So much has been written about the inefficiencies of the construction industry, its fragmentation, lack of collaboration, low margins, adversarial pricing, poor productivity, financial fragility, lack of research and development, poor industry image and relatively weak use of digital solutions. The Irish government recognises the importance of digital innovation to address many of the challenges the construction industry faces. With recent high profile reports of escalating spend on signature public sector projects and weak productivity performance …

An Investigation Into Current Procurement Strategies That Promote Collaboration Through Early Contractor Involvement With Regards To Their Suitability For Irish Public Work Projects, Barry Mcauley, Frederic Lefebvre

Conference papers

Previous research has established that multi-disciplinary collaboration will benefit a construction project throughout its lifecycle. While Lean Construction, Building Information Modelling (BIM), and Integrated Project Delivery (IPD) can all be viewed as separate processes which add independent value to a project, they are more effective when used in partnership with each other. In order to ensure the high levels of collaboration expected for these processes to work in unison, the early involvement of the Contractor is paramount. Early contractor involvement within the design process can ensure a more focused integrated project team, improvement of both constructability and cost certainty, as …

From Roadmap To Implementation: Lessons For Ireland’S Digital Construction Programme, Barry Mcauley, Alan Hore, Roger West

Conference papers

As part of their Future of Construction initiative in 2018 the World Economic Forum published an action plan to accelerate Building Information Modelling adoption. The WEF report highlighted actions that companies, industry organisations and governments are advised to implement to accelerate BIM adoption and better capitalise on delivering better project outcomes. According the authors of the report BIM is seen as the centrepiece of the construction industry’s digital transformation, however they acknowledged that BIM adoption globally remain slow. Anecdotal experience would suggest that BIM usage in Ireland is also very low and that a similar initiative or an adaptation of …

Delivering Energy Savings For The Supply Chain Through Building Information Modelling As A Result Of The Horizon 2020 Energy Bimcert Project, Barry Mcauley, Avril Behan

Conference papers

The global buildings sector is now responsible for 40% of final energy consumption as well as accounting for 33% of energy-related carbon dioxide emissions. This has resulted in a growing urgency to address energy and emissions from buildings and construction, to meet restrictive 2020 targets as specified by the European Union (EU). To achieve these targets a number of funding initiatives have been put in place through Horizon 2020 with a focus on BIM, due to it having the potential to rapidly produce energy outputs that enable design teams to analyse and compare the most cost-effective, energy-efficient options. However, despite …

Development Of A Framework To Support The Effective Adoption Of Bim In The Public Sector: Lessons For Ireland, Shiyao Kuang, Alan Hore, Barry Mcauley, Roger West

Conference papers

Building Information Modelling (BIM) has been formally adopted by many countries with the promise of creating greater economic, social and sustainability benefits. Several authors and institutions have presented alternative BIM policies and tactics which have been adopted by developed countries. However, there is evidence to indicate that BIM adoption theories are not well established and, in particular, the linkage between BIM public sector adoption strategy outcomes and their contribution to achieving Government policy objectives are underdeveloped. This paper will present the outcome of the first phase of a systematic literature review of published studies (including journal papers and noteworthy international …