Civil and Environmental Engineering Commons^™

Reducing Food Scarcity: The Benefits Of Urban Farming, S.A. Claudell, Emilio Mejia

Journal of Nonprofit Innovation

Urban farming can enhance the lives of communities and help reduce food scarcity. This paper presents a conceptual prototype of an efficient urban farming community that can be scaled for a single apartment building or an entire community across all global geoeconomics regions, including densely populated cities and rural, developing towns and communities. When deployed in coordination with smart crop choices, local farm support, and efficient transportation then the result isn’t just sustainability, but also increasing fresh produce accessibility, optimizing nutritional value, eliminating the use of ‘forever chemicals’, reducing transportation costs, and fostering global environmental benefits.

Imagine Doris, who is …

Small-Scale Testing Of Passive Fire Protection Systems For Structures On The Wildland-Urban Interface, Makenzie Wilson, Thomas H. Fletcher, Taylor J. Sorensen

Faculty Publications

The average intensity and frequency of wildland fires have been on the rise over the years due to climate change. This, in combination with recent expansion and growth of rural areas, has led to an increased risk of wildfire damage for structures in the Wildland-Urban Interface (WUI). This paper proposes a permanent passive fire protection system that is built into the structure. A flame-resistant material would be attached to the sheathing underneath the roofing and siding material. This system would allow the easily replaceable exterior components of the structure to burn while leaving the interior of the structure protected. Small-scale …

Isogeometric Boundary-Conforming Body-In-White Crash Model Construction, Analysis, And Comparison With Fem Model, Kendrick M. Shepherd

Faculty Publications

In this paper, we discuss model generation to rebuild the body-in-white of a 1996 Dodge Neon finite element model into a isogeometric conforming analysis-suitable crash model. We then perform the first known boundary-fit isogeometric body-in-white crash analysis of the vehicle and compare results achieved by traditional finite element methods. Results indicate the value and potential of high-order meshes in analysis.

Isogeometric Reconstruction And Crash Analysis Of A 1996 Body-In-White Dodge Neon, Kendrick M. Shepherd

Faculty Publications

Isogeometric analysis (IGA) has attracted attention from academia and industry because of its high-fidelity results, ability to represent geometry exactly, and potential to streamline the engineering design-through-analysis process. However, one of the greatest challenges limiting the scope of IGA is the ability to rapidly convert CAD geometry into a set of splines suitable for engineering analysis¾particularly for a wide set of shapes of industrial relevance. In this presentation, we describe a new, mathematically rigorous, potentially automatable framework using Ricci flow and subsequent metric optimization through which surface geometries can be rebuilt as sets of watertight, analysis-suitable, boundary-conforming semistructured NURBS patches. …

Resiliency Of Utah's Road Network: A Logit-Based Approach, Max Evan Barnes

Theses and Dissertations

The Utah Department of Transportation (UDOT) manages and maintains a complex state-wide network of highways. Recent incidents such as the collapse of the I-35W bridge in Min- neapolis, Minnesota, and the I-85/Piedmont Road fire and subsequent bridge collapse in Atlanta, Georgia, have brought identification of transportation network vulnerabilities to the forefront of UDOT’s planning efforts. Traditional estimates of transportation network impacts have focused on increases to user travel time or the volume of affected traffic, but studies of these disasters have revealed that when facing a degraded transportation network, people adjust their trip making in terms of destination, mode, and …

Extending Multi-Beam Sonar With Structure From Motion Data Of Shorelines For Complete Pool Bathymetry Of Reservoirs, Izaak Brandt Cooper

Theses and Dissertations

Bathymetric mapping is an important tool for reservoir management, typically completed before reservoir construction. Historically, bathymetric maps were produced by interpolating between points measured at a relatively large spacing throughout a reservoir, typically on the order of a few, up to 10, meters or more depending on the size of the reservoir. These measurements were made using traditional survey methods before the reservoir was filled, or using sonar surveys after filling. Post-construction issues such as sedimentation and erosion can change a reservoir, but generating updated bathymetric maps is difficult as the areas of interest are typically in the sediment deltas …

Evaluation Of Concrete Bridge Decks Comprising Twisted Steel Micro Rebar, Aubrey Lynne Hebdon

Theses and Dissertations

The objective of this research was to investigate the effects of twisted steel micro rebar (TSMR) fibers on 1) the mechanical properties of concrete used in bridge deck construction and 2) the early cracking behavior of concrete bridge decks. This research involved the evaluation of four newly constructed bridge decks through a series of laboratory and field tests. At each location, one deck was constructed using a conventional concrete mixture without TSMR, and one was constructed using the same conventional concrete mixture with an addition of 40 lb of TSMR per cubic yard of concrete. Regarding laboratory testing, the conventional …

Groundwater Level Mapping Tool: An Open Source Web Application For Assessing Groundwater Sustainability, Steven W. Evans, Norman L. Jones, Gustavious P. Williams, Daniel P. Ames, E. James Nelson

Faculty Publications

Decision makers need an accurate understanding of aquifer storage trends to effectively manage groundwater resources. Groundwater is difficult to monitor and quantify since the data collected from monitoring wells are often available only at irregular and infrequent intervals. We present an open-source web application (app) to visualize groundwater data over time and automatically calculate changes in aquifer storage volume to help managers assess aquifer sustainability. This app uses a novel multi-linear regression (MLR) algorithm to impute missing data for infrequently sampled wells, using correlated data from other wells in the same aquifer. The app uses this MLR-imputed data to spatially …

Exploiting Earth Observation Data To Impute Groundwater Level Measurements With An Extreme Learning Machine, Steven Evans, Gustavious P. Williams, Norman L. Jones, Daniel P. Ames, E. James Nelson

Faculty Publications

Groundwater resources are expensive to develop and use; they are difficult to monitor and data collected from monitoring wells are often sporadic, often only available at irregular, infrequent, or brief intervals. Groundwater managers require an accurate understanding of historic groundwater storage trends to effectively manage groundwater resources, however, most if not all well records contain periods of missing data. To understand long-term trends, these missing data need to be imputed before trend analysis. We present a method to impute missing data at single wells, by exploiting data generated from Earth observations that are available globally. We use two soil moisture …

Polyester Polymer Concrete For Bridge Deck Overlays, Robert James Stevens

Theses and Dissertations

The objectives of this research were to 1) compile a synthesis of information about polyester polymer concrete (PPC) from the literature; 2) conduct a scanning tour to observe PPC construction, inspect in-service PPC overlays, and discuss topics related to PPC; 3) revise the existing Utah Department of Transportation (UDOT) PPC specification; 4) document a PPC field demonstration project; and 5) perform laboratory characterization of the material properties of field-mixed PPC. The scope of the research included a scanning tour, field testing, and laboratory experimentation. The objectives of the scanning tour included observation of a PPC overlay placement, inspection of existing …

Splice Performance Of #6 Reinforcing Bars In Masonry With Self-Consolidating Grout, Annie Ruth Nielson

Theses and Dissertations

Reinforced masonry grouted using self-consolidating grout (SCG) is a relatively new and economically competitive option for construction, providing advantages such as reduced construction time, decreased noise and vibration, and reliable consolidation. However, SCG has different properties than conventional grout and its performance should be verified using current governing code requirements. The purpose of this research program was to determine the development length of spliced reinforcing bars in masonry grouted with SCG.Twelve masonry panels, four courses high and two and a half blocks wide, were constructed using 8-inch concrete masonry units, each with two pairs of vertically spliced #6 reinforcing bars. …

An Open-Source Tool To Facilitate The Processing Of Grace Observations And Gldas Outputs: An Evaluation In Bangladesh, Adam J. Purdy, Cédric H. David, Md. Safat Sikder, John T. Reager, Hrishikesh A. Chandanpukar, Norman L. Jones, Mir A. Matin

Faculty Publications

Bangladesh lies at the intersection of the Ganges, Brahmaputra, and Meghna rivers with a combined average discharge of 38,000 m3s−1 ranking fourth globally. Despite the volume of water flowing through and seasonally inundating parts of the landscape, groundwater reliance is necessary to support an intensive agricultural industry. Here we use newly-developed open-source software to combine observations from the Gravity Recovery and Climate Experiment (GRACE) satellites with hydrologic estimates of land water storage from the Global Land Assimilation Data System (GLDAS) to isolate basin-scale groundwater anomalies in Northwest Bangladesh from 2002 to 2016. We place our estimates in the context of …

Hydrologic Modeling As A Service (Hmaas): A New Approach To Address Hydroinformatic Challenges In Developing Countries, Michael A. Souffront Alcantara, E. James Nelson, Kiran Shakya, Christopher Edwards, Wade Roberts, Corey Krewson, Daniel P. Ames, Norman L. Jones, Angelica Gutierrez

Faculty Publications

Hydrologic modeling can be used to aid in decision-making at the local scale. Developed countries usually have their own hydrologic models; however, developing countries often have limited hydrologic modeling capabilities due to factors such as the maintenance, computational costs, and technical capacity needed to run models. A global streamflow prediction system (GSPS) would help decrease vulnerabilities in developing countries and fill gaps in areas where no local models exist by providing extensive results that can be filtered for specific locations. However, large-scale forecasting systems come with their own challenges. These New hydroinformatic challenges can prevent these models from reaching their …

Enabling Stakeholder Decision-Making With Earth Observation And Modeling Data Using Tethys Platform, E. James Nelson, Sarva T. Pulla, Mir A. Matin, Kiran Shakya, Norm Jones, Daniel P. Ames, W. Lee Ellenburg, Kel N. Markert, Cédric H. David, Benjamin F. Zaitchik, Patrick Gatlin, Riley Hales

Faculty Publications

Tethys Platform is an open source framework for developing web-based applications for Earth Observation data. Our experience shows that Tethys significantly lowers the barrier for cloud-based app development, simplifies the process of accessing scalable distributed cloud computing resources and leverages additional software for data and computationally intensive modeling. The Tethys software development kit allows users to create web apps for visualizing, analyzing, and modeling Earth Observation data. Tethys platform provides a collaborative environment for scientists to develop and deploy several Earth Observation web applications across multiple Tethys portals. We work in partnership with leading regional organizations world-wide to help developing …

Generalized Beam–Spring Model For Predicting Elastic Behavior Of Partially Composite Concrete Sandwich Wall Panels, Salam Al-Rubaye, Taylor Sorensen, Robert J. Thomas, Marc Maguire

Faculty Publications

Partially composite sandwich wall panels (SWP) have been used in the construction industry for at least twenty years. Currently there is limited codified guidance for designers of partially composite concrete SWP, but they are being designed safely and routinely. Design is often guided by the composite connector manufacturers who sell proprietary composite connectors often using a variation of truss-type matrix methods for prediction of elastic behavior of SWPs. The purpose of this paper is to quantify the accuracy of such a model in a uniform manner by developing a generalized version of these matrix models called the beam-spring model (BSM). …

Development Of A Simplified Performance-Based Procedure For Assessment Of Post-Liquefaction Settlement Using The Cone Penetration Test, Jingwen He

Theses and Dissertations

Earthquake-induced liquefaction can cause severe damage to infrastructure is a serious concern in civil engineering practice. Post-liquefaction settlement is one of the common effects of liquefaction. The ability to predict and quantify post-liquefaction free-field settlement is a crucial part of seismic design. Many approaches have been developed during the past 50 years to perform liquefaction hazard analysis. The performance-based earthquake engineering (PBEE) framework developed by the Pacific Earthquake Engineering Research (PEER) center is a probabilistic framework that can provide a more accurate and complete seismic hazard analysis than other traditional methods. However, the PBEE framework is not widely used in …

Management Of Global Reservoir Sedimentation: Evaluating Rescon 2 For Sediment Management Alternatives, Christopher Jacob Garcia

Theses and Dissertations

Reservoir sedimentation occurs as dams impound streams and rivers, preventing the delivery of sediments downstream. Globally, reservoirs lose approximately 40 million acre-ft of storage to sediments each year. Several methods for managing reservoir sedimentation have been developed to help extend project life. In 2017, the World Bank sponsored REServoir CONservation (RESCON) 2, a pre-feasibility program aimed to help users select sediment management practices to consider for more detailed studies.There are two main objectives to this research: 1) perform a sensitivity analysis to understand which parameters require greater precision and which can be roughly approximated, and 2) evaluate RESCON 2 suggested …

Molecular Methods For The Identification And Quantification Of Cyanobacteria In Surface Water Sources, Treyton Michael Moore

Theses and Dissertations

Geosmin is a strong musty-flavored organic compound that is responsible for many taste-and-odor events in surface drinking water sources like lakes and reservoirs. The taste threshold of geosmin for humans is lower than 10 ng/L. Traditional treatment methods will not remove geosmin to this level. Additional water treatment methods must be implemented to successfully remove the geosmin and its associated flavor and odor from drinking water. Furthermore, geosmin is produced by cyanobacteria somewhat sporadically, so it is difficult to predict when taste-and-odor events are going to occur. The difficulty involved with predicting geosmin events has led most water treatment facilities …

An Analysis Of Decision Boundaries For Left-Turn Treatments, Michael Louis Adamson

Theses and Dissertations

The purpose of this project is to evaluate the safety and operational differences between three left-turn treatments: permitted, protected, and protected-permitted left-turn phasing. Permitted phasing allows vehicles to turn left after yielding to any opposing vehicles; protected phasing provides an exclusive phase for vehicles to turn left that does not allow opposing vehicles; and protected-permitted phasing combines the previous phasing alternatives, allowing vehicles to turn after yielding while also providing some green time for protected left-turns.As part of evaluating the differences between these left-turn treatments, crashes before and after the change at intersections that had experienced a permanent change from …

Near Real-Time Flood Forecasts From Global Hydrologic Forecasting Models, Corey Nicholas Krewson

Theses and Dissertations

This research assesses possible methods for extending the Streamflow Prediction Tool from a streamflow forecasting model to a flood extent forecasting model. This new flood extent forecasting model would allow valuable and easy to understand information be disseminated in a timely manner for flood preparation and flood response. The Height Above Nearest Drainage (HAND) method and AutoRoute method were considered for flood extent models but the HAND was the better option for its simple and quick computation as well as its viability on a global scale. Due to the importance of Digital Elevation Models (DEMs) in these flood extent models, …

Estimating Phase Durations For Chloride-Induced Corrosion Damage Of Concrete Bridge Decks In Utah, Kaylee Dee Bateman

Theses and Dissertations

Chloride-induced deterioration of concrete bridge decks can be described in terms of three phases: 1) initiation of rebar corrosion, 2) rust formation and development of deck damage, and 3) accelerated deck damage towards structural failure. The first objective of this research was to investigate relationships among chloride concentration at the top mat of reinforcing steel, deck age, cover depth, and occurrence of delamination for concrete bridge decks with selected surface treatments and rebar types. Relating these factors can help establish greater understanding about the duration of each phase of the deterioration process. A second objective of this research was to …

Pedestrian Walking Speeds At Signalized Intersections In Utah, Jordi Jordan Berrett

Theses and Dissertations

The 2009 edition of the Manual on Uniform Traffic Control Devices (MUTCD) recommends a pedestrian walking speed of 3.5 feet per second for use in the timing of pedestrian clearance intervals at signalized intersections (reduced from 4.0 feet per second in the 2003 edition). Jurisdictions across the state of Utah continue to maintain pedestrian walking speeds of 4.0 feet per second for normal intersections with guidance on engineering judgement for areas where a lower pedestrian walking speed should be considered. In 2018, it was decided that the current state guidance with regard to pedestrian walking speeds be evaluated for any …

Developing A Method To Identify Horizontal Curve Segments With High Crash Occurrences Using The Haf Algorithm, Joseph Stuart Browning

Theses and Dissertations

Crashes occur every day on Utah’s roadways. Curves can be particularly dangerous as they require driver focus due to potentially unseen hazards. Often, crashes occur on curves due to poor curve geometry, a lack of warning signs, or poor surface conditions. This can create conditions in which vehicles are more prone to leave the roadway, and possibly roll over. These types of crashes are responsible for many severe injuries and a few fatalities each year, which could be prevented if these areas are identified. This highlights a need for identification of curves with high crash occurrences, particularly on a network-wide …

Integrating Global And Local Forecasting Resources And Methods For Flood Warning Systems In Central America And Caribbean Region, José Fidel Pérez

Theses and Dissertations

Hurricanes and tropical storms occur very frequently in the Central American and Caribbean Region (CA&CR). These extreme weather events produce a lot of rain and consequently a lot of flooding. Damages and loses have been estimated to amount to 13.4 billion dollars in the last ten years. Flood Warning Systems (FEWS) are a key preventive strategy to reduce risk. Technological progress is improving the resources made available for FEWS to be more viable. In spite of the international support for FEWS and the fast development of ICT, there are very few countries in the CA&CR that have succeeded in developing …

Experimental Evaluation Of Replaceable Shear Fuse Moment Connections, Shannon Shun Oh

Theses and Dissertations

Steel special moment frames (SMFs) are known to be highly ductile seismic force- resisting systems. The performance of an SMF relies on the ability of the connections to accommodate large inelastic deformations. After the brittle failure of some steel moment frame connections during the 1994 Northridge Earthquake, experimental tests were used to investigate the ductility and strength of these connections. An experimental study was performed to investigate the seismic performance a new connection called the Replaceable Shear Fuse (RSF) connection. The RSF connection uses shear-yielding fuse plates to prevent beam and column yielding. A total of 7 test specimens with …

Development Of A Simplified Analysis Approach For Predicting Pile Deflections Of Piers Subjected To Lateral Spread Displacements And Application To A Pier Damaged During The 2010 Maule, Chile, M8.8 Earthquake, Logan Matthew Palmer

Theses and Dissertations

The 2010, moment magnitude 8.8 earthquake that occurred near Maule, Chile caused major damages to several piers in the Port of Coronel located approximately 160 kilometers (100 miles) to the South of the earthquake epicenter. One of the piers, the North Pier, experienced significant lateral spreading that was caused from liquefaction of the soils at the approach zone of the pier. Damages from lateral spreading and liquefaction effects consisted of sheet pile welding ruptures of the cross-support beams, stiffener buckling, pile displacements, pile rotations, and pier deck displacement. Researchers analyzed the North Pier after the earthquake and documented in detail …

A Flexible Service-Oriented Approach To Address Hydroinformatic Challenges In Large-Scale Hydrologic Predictions, Michael Antonio Souffront Alcantara

Theses and Dissertations

Water security is defined as a combination of water for achieving our goals as a society, and an acceptable level of water-related risks. Hydrologic modeling can be used to predict streamflow and aid in the decision-making process with the goal of attaining water security. Developed countries usually have their own hydrologic models; however, developing countries often lack hydrologic models due to factors such as the maintenance, computational costs, and technical capacity needed to run models. A global streamflow prediction system (GSPS) would help decrease vulnerabilities in developing countries and fill gaps in areas where no local models exist by providing …

Swat Online: Development Of A Web-Based Decision Support System For The Soil And Water Assessment Tool, Spencer Dean Mcdonald

Theses and Dissertations

As satellite and climate modelling technology continues to improve and as climatological disasters and issues continue to impact the global community, climate data will increase in size and relevance. With this new influx of information, it is becoming more and more important for scientists to simply and concisely communicate their findings to both decision makers in governments and disaster preparedness organizations and also to the general public. The Soil and Water Assessment Tool (SWAT) is a powerful modelling tool that allows scientists to simulate essentially all of the physical processes involved in the water cycle. The data that SWAT produces …

Relationship Between Compressive Strength Of Different Shape And Thickness Specimens Of Type S Mortar, Theodore James Moffett

Theses and Dissertations

Mortar is the cementitious binding material placed between masonry blocks to create a composite system. The American Society of Testing and Materials (ASTM), along with other organizations, have established the testing of prismatic mortar specimens for evaluating mechanical properties, like compressive strength. Mortar joints, however, possess vastly different characteristics compared to prismatic specimens, especially in terms of geometry and water content. These differences prevent a direct comparison of compressive strength between prismatic specimens and actual mortar joints in the assembly. The objective of this study was to analyze Type S mortar joints, with particular emphasis on specimen shape and water …

Thermal Bridging In Concrete Sandwich Walls, Taylor J. Sorensen, Robert J. Thomas, Sattar Dorafshan, Marc Maguire

Faculty Publications

Energy efficiency requires continuity of the insulation system in structural and architectural details.