Civil and Environmental Engineering Commons^™

Synergetic Effect Of Viscosity Modifying Admixtures And Polycarboxylate Ether Superplasticizer On Key Characteristics Of Thixotropic Uhpc For Bonded Bridge Deck Overlay Rehabilitation, Le Teng, Ming Jin, Jiadi Du, Kamal H. Khayat

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Thin bonded ultra-high-performance concrete (UHPC) overlay is an advanced technology for bridge deck rehabilitation. UHPC should be tailored to secure adequate flowability and high thixotropy to facilitate mixing and placement with a low risk of sagging of the material on sloped bridge deck surfaces. The synergetic effect between nano clay (NC) and polycarboxylate ether (PCE) superplasticizer or cellulose-based viscosity modifying admixture (VMA) and PCE on the rheological properties (yield stress, plastic viscosity, and thixotropy), cement hydration, autogenous shrinkage, compressive strength, and porosity was systematically investigated. The bond strength between conventional concrete (CC) representing existing bridge deck concrete and thixotropic UHPC …

Application Of Multidisciplinary Community Resilience Modeling To Reduce Disaster Risk: Building Back Better, Wanting "Lisa" Wang, John W. Van De Lindt, Blythe Johnston, P. Shane Crawford, Guirong Grace Yan, Thang Dao, Trung Do, Katie Skakel, Mojtaba Harati, Tu Nguyen, Robinson Umeike, Silvana Croope, Andre R. Barbosa

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

From december 10 to december 11, 2021, a deadly tornado outbreak struck across several states in the us, including arkansas, illinois, kentucky, and tennessee. This tornado outbreak resulted in at least $3.9 Billion in damage, more than 90 fatalities, and hundreds of injuries. Mayfield, kentucky, a small city in the eastern united states, was hit by a long-track tornado rated as an enhanced fujita 4 (ef4) scale and was one of the communities most heavily damaged during the tornado outbreak. Following the 2021 tornado event, an analysis was performed in the interdependent networked community resilience modeling environment (in-core) for the …

Chloride Binding Mechanism In Seawater-Mixed Uhpc, Wei Zhang, Dawei Ding, Mengmeng Li, Tiao Wang, Hongyan Ma, Binmeng Chen, Hongxing Hu, Jizhou Chen, Xiaomin Liu, Dongshuai Hou

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The rapid development of marine concrete structures and the sharp shortage of freshwater resources contribute to the wide investigation of seawater-mixed ultra-high-performance concrete (swuhpc). However, few studies have investigated the chloride ions (cl-) binding mechanism of swuhpc. Herein, the chloride binding experiments and molecular dynamics (md) simulation were carried out to reveal the physically and chemically bound cl- mechanisms of swuhpc. The results of the experiments clearly demonstrate that the addition of silica fume (sf) led to a significant decrease in the capacity of cl- binding. Conversely, the incorporation of metakaolin (mk) resulted in a marked increase in the content …

A Review Of Whipple Shield Ballistic Limit Equations, S. Ryan, W. (William) P. Schonberg

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Ballistic limit equations (BLEs) are semi-analytical expressions used to predict the risk posed by micrometeoroid and orbital debris (MMOD) impacts on a spacecraft. A foundational BLE, known as the new non-optimum (NNO) equation was published by Eric Christiansen of NASA Johnson Space Center in 1990 for application on Whipple shields – two-plate configurations consisting of a thin sacrificial plate located at some standoff in front of the spacecraft pressure hull or structural wall. Today, BLEs for almost all multi-plate spacecraft structures, e.g., honeycomb sandwich panels, monolithic structures with thermal insulation blankets, etc., are based on the NNO Whipple BLE. We …

Four-Way Cfd-Dem Coupling To Simulate Concrete Pipe Flow: Mechanism Of Formation Of Lubrication Layer, Tooran Tavangar, Masoud Hosseinpoor, Jeffrey S. Marshall, Ammar Yahia, Kamal H. Khayat

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This study introduced a four-way CFD-DEM coupling approach to simulate the shear-induced particle migration (SIPM) mechanism leading to formation of the lubrication layer (LL) during concrete pumping. The CFD-DEM simulations considered the coupled effect of concentration (10 %–40 %) and wide size distribution (1–17 mm) of aggregate and rheology of the mortar for forces between the suspending matrix and the particles (and vice versa), as well as force transmission directly between particles (and the pipe wall). The formation of the LL was successfully simulated through a more realistic understanding the SIPM mechanism and rheological evaluation across the pipe with comparable …

Poster Session: Onu Engineering Freshman And Senior Design Projects, Keith Schimmel

Scholar Week 2016 - present

This poster session is held Friday, April 19, 4:45-6:15pm, with food served, in the Reed Hall of Science Tech Center.

The capstone engineering senior design projects at Olivet Nazarene University involve interdisciplinary engineering teams completing real-life projects sponsored by companies, mission organizations, and professional society competitions. The engineering first-year design projects at Olivet Nazarene University involve interdisciplinary engineering teams proposing product improvement designs, using Computer Aided Design (CAD) software. Posters for both the senior and freshman engineering design projects will be presented during this poster session.

Adventure Course - Hocking Hills Retreat Center, Donavan Yelle, Valerie Froylan, Nathaniel Nargang, Samantha Paterson

Scholar Week 2016 - present

Hocking Hills Retreat Center located in Logan, Ohio tasked a senior engineering design group with the creation of a high and low ropes adventure course. The goal of this course is to increase the number of visitors to the retreat center. The course was designed to feature a kid’s area; a teamwork section; and beginner, intermediate, and expert courses. All course elements range from ten to thirty feet in elevation to allow for a variety of difficulty levels. The course has been modeled using both AutoCAD and Revit software. Additionally, structural analysis was performed to ensure the safety and strength …

Effects Of Rest Time And Curing Regime On Short- And Long-Term Strength Of Class C Fly Ash-Based Alkali-Activated Mortars, Cedric Kashosi, Ahmed Gheni, Eslam Gomaa, Mohamed Elgawady

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This study investigated how different rest times affect the strength development of fly-ash-based alkali-activated mortar (aam) over a period of 90 days. Two types of fly ash with varying calcium oxide contents of 37 and 21% were used. The rest times ranged from 2 to 36 h, and three curing methods (ambient, oven, and steam) were tested. The results showed that the rest time significantly influenced the compressive strength of the aam. The optimal rest time was found to be between 12 and 30 h depending on the curing method and fly ash type. Beyond this range, there were only …

Comprehensive Numerical Modeling Of Prestressed Girder Bridges Under Low-Velocity Impact, Mohamed T. Elshazli, Mohanad M. Abdulazeez, Mohamed Elgawady, Ahmed Ibrahim

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Accidental Collisions Involving Over-Height Trucks That Exceed Vertical Clearance Limits And Bridge Superstructures Frequently Happen, Resulting In Compromised Girders And Potential Threats To Structural Safety And Performance. The Numerical Simulation Of Large-Scale Prestressed Girder Bridge Collisions Poses Challenges Due To The Associated Nonlinearities, As Well As The Limited Availability Of Large-Scale Experimental Testing Data In The Literature Due To Cost And Complexity Constraints. This Study Introduces A Numerical Modeling Approach To Efficiently Capture The Response Of Prestressed Girder Bridges Under Lateral Impact Loads. A Finite Element (FE) Model Was Developed Using LS-DYNA And Meticulously Validated Against Experimental Data From The …

Methodology To Design Eco-Friendly Fiber-Reinforced Concrete For 3d Printing, Haodao Li, Alfred Addai-Nimoh, Eric Kreiger, Kamal H. Khayat

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Greater use of locally available supplementary cementitious materials (SCM) to reduce cement content and addition of fiber reinforcement can enhance the performance of 3D printing (3DP) technology in construction. In this study, three classes of eco-friendly 3D printable fiber-reinforced mixtures were targeted, namely ultra-high-performance concrete (UHPC), high-performance concrete (HPC), and conventional concrete (CC). A step-by-step methodology was proposed to maximize the substitution rate of cement with SCM and limestone filler and optimize fiber volume for the successful development of 3D printable fiber-reinforced materials. Binder combinations were initially investigated on the paste level to determine the packing density and robustness. Selected …

Natural Gas Induced Vegetation Stress Identification And Discrimination From Hyperspectral Imaging For Pipeline Leakage Detection, Pengfei Ma, Ying Zhuo, Genda Chen, Joel G. Burken

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Remote Sensing Detection of Natural Gas Leaks Remains Challenging When using Ground Vegetation Stress to Detect Underground Pipeline Leaks. Other Natural Stressors May Co-Present and Complicate Gas Leak Detection. This Study Explores the Feasibility of Identifying and Distinguishing Gas-Induced Stress from Other Natural Stresses by Analyzing the Hyperspectral Reflectance of Vegetation. the Effectiveness of This Discrimination is Assessed Across Three Distinct Spectral Ranges (VNIR, SWIR, and Full Spectra). Greenhouse Experiments Subjected Three Plant Species to Controlled Environmental Stressors, Including Gas Leakage, Salinity Impact, Heavy-Metal Contamination, and Drought Exposure. Spectral Curves Obtained from the Experiments Underwent Preprocessing Techniques Such as Standard …

Characterization Of Alkali-Silica Reaction (Asr) Products And C-S-H Using Swir Spectroscopy For Nondestructive Detection Of Asr, Pengfei Ma, Wenyu Liao, Ying Zhuo, Hongyan Ma, Yanping Zhu, Genda Chen

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This study explores the feasibility of characterizing alkali-silica reaction (ASR) products and calcium silicate hydrates (C-S-H) from short-wave infrared (SWIR) spectroscopy. ASR products and C-S-H samples with different Ca/Si ratios were synthesized and analyzed through XRD, 29Si nuclei magnetic resonance (NMR) and SWIR spectroscopy. Fourier-transform infrared spectroscopy (FTIR) was collected to help interpret the results from the SWIR spectroscopy. The obtained spectroscopic features were applied to quantify the ASR product abundance denoted by the length expansion of mortar bars after an accelerated ASR test. The results show that the SWIR spectra of the synthetic ASR gels are similar regardless of …

Evolution Of Sbs-Modified Asphalt Performance Under Aging And Rejuvenation Cycle Conditions, Ke Shi, Feng Ma, Jenny Liu, Zhen Fu, Ruimeng Song, Dongdong Yuan, Aboudou Wassiou Ogbon

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Improving the poor long-term service performance of rejuvenated SBS-modified asphalt (REF-LT) is highly challenging. In this study, a blend of aged and virgin binders was used to rejuvenate REF-LT and the evolution of the asphalt performance was observed during regeneration and reaging processes. An SBS-modified asphalt (SBM) and base asphalt (BA) were mixed with REF-LT in specified ratios to prepare SBM- and BA-rejuvenated asphalts. The rejuvenated asphalts were subjected to short- and long-term aging. The high/low-temperature rheological properties, fatigue resistance, rejuvenation mechanism, and changes in the functional groups of the rejuvenated and reaged asphalts were characterized using a dynamic shear …

Numerical And Experimental Investigation Of Negative Stiffness Beams And Honeycomb Structures, Yasser Darwish, Mohamed A. Elgawady

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Metamaterial structures that exhibit negative stiffness (MSNS) behavior have shown the potential to be used as energy dissipation systems in different applications. Negative stiffness honeycomb structures consist of multiple pre-buckled beams that snapping through from one pre-buckled mode to another buckled mode, when subjected to transverse loads, displaying negative stiffness, and dissipating a significant portion of the input energy. This paper presents finite element models (FEMs) developed to investigate the performance of negative stiffness pre-buckled beams and honeycombs. The FEMs were validated using experimental results of single pre-buckled beams and honeycomb structures. The experimental testing of the pre-buckled beams was …

Synergistic Effect Of Macro Synthetic Fiber And Shrinkage-Reducing Admixture On Engineering Properties Of Fiber-Reinforced Super-Workable Concrete, Jingjie Wei, Nima Farzadnia, Kamal H. Khayat

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This study aims to enhance fiber-reinforced super-workable concrete (FR-SWC) by optimizing the system of shrinkage-reducing admixture (SRA) and macro-synthetic fiber (MSF) for low shrinkage and uncompromised mechanical properties. A factorial design approach was employed to model the effect of fiber content, SRA dosage, and combined ratios of two types of MSF on performance of FR-SWC. MSF content had the greatest impact on mechanical properties, followed by SRA and MSF combination. Using MSF increased equivalent flexural strength ratio by 310% compared to the control mixture, regardless of MSF combination and SRA. SRA had the most significant effect on drying shrinkage, followed …

From Pumping To Deposition: A Comprehensive Review Of Test Methods For Characterizing Concrete Printability, Ali Fasihi, Nicolas A. (Ali) Libre

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

3D concrete printing (3DCP) technology has gained significant attention in the construction industry due to its potential to revolutionize the way buildings are designed and constructed. However, successful application of 3DCP requires robust standard test procedures to characterize the printability of concrete. Printability is a measure of workability for a printing material in the 3DCP process, which is characterized by pumpability, extrudability, and buildability. This paper presents a comprehensive review of the test methods that could be used for material characterization during various printing steps, including pumping, extrusion, and layer deposition. The underlying mechanisms relevant to each step, key governing …

Use Of Hybrid Fibers And Shrinkage Mitigating Materials In Scc For Repair Applications, Kamran Aghaee, Kamal H. Khayat

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Self-consolidating concrete (SCC) is used to repair structural elements with congested reinforcement or restricted access to placement and consolidation. In addition to adequate flowability, passing ability, filling capacity, and stability, adequate bonding to the substrate and reinforcing bars, low shrinkage and cracking resistance are required for successful repair. This study employs various shrinkage mitigating materials, including expansive agent (EA), coupled use of EA with shrinkage reducing admixture (SRA), and EA with pre-saturated lightweight sand (LWS) to fulfill these requirements. The effect of these materials on the performance of SCC made with a hybrid synthetic (PP) fiber and a hybrid steel-synthetic …

The Interpretative Structural Modeling For Stakeholder Involvement To Reduce Slum Settlements, Bich Hanes Bich, Ayomi Dita Rarasati

Smart City

The array of problems originating from slum settlements not only results in unwholesome environment, unlawful land utilization, and various internal challenges within the vicinity but also impacts the surrounding regions and the overall urban infrastructure network. In pursuit of Indonesia's 2045 Vision, which emphasizes on "equitable and integrated infrastructure development", the zero slums constitutes a pivotal component of the Ministry of Public Works and Public Housing's overarching vision. Nonetheless, a disparity has been identified in addressing slum settlements in West Kalimantan, hindering the achievement of this objective. This research aims to identify the stakeholders and the priority factors in determining …

The Hydration, Microstructure, And Mechanical Properties Of Vaterite Calcined Clay Cement (Vc³), Yaqiang Li, Yue Li, Hongyan Ma, Jiaqi Li

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Limestone (calcite) calcined clay cement (LC3) is a promising low-CO2 binder, but the low activity of calcite cannot compensate the reduction in clinker factor, resulting in low one-day strength and limiting its broad applications. As recent carbon capture and utilization technologies allow scalable production of vaterite, a more reactive CaCO3 polymorph, we overcome the challenge by introducing vaterite calcined clay cement (VC3), inspired by the vaterite-calcite phase change. In the present study, VC3 exhibits higher compressive strengths and faster hydration than LC3. Compared to hydrated LC3, hydrated VC3 exhibits increased amount of hemi- and mono-carboaluminate formation and decreased amount of …

Quantifying The Role Of Insurance In Tornado-Impacted Community Recovery: A Survey And Simulation-Based Approach, Jie Zhao, Ji Yun Lee, Guirong Grace Yan, Fangjiao Ma

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Insurance against disasters plays a critical role in community recovery by providing policyholders with reliable and timely payments for repairing or reconstructing damaged houses. By allowing homeowners to transfer risk, insurance enables homeowners to address house without experiencing significant financial burdens. Although historical events have highlighted the importance of insurance, its quantitative impact on community recovery, particularly in tornado-impacted communities, is understudied. This study focuses on advancing our understanding of whether sufficiently insured houses can have a positive impact on the recovery of tornado-impacted communities (i.e., the main research question). This paper proposes a two-stage simulation framework to quantitatively evaluate …

2023 Scholarly Productivity Report, Missouri University Of Science And Technology

Civil, Architectural and Environmental Engineering Scholarly Productivity Reports

No abstract provided.

Prediction Of Self-Consolidating Concrete Properties Using Xgboost Machine Learning Algorithm: Part 1–Workability, Amine El Mahdi Safhi, Hamed Dabiri, Ahmed Soliman, Kamal Khayat

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The Interest in Implementing Self-Consolidating Concrete (SCC) in Major Construction Projects Has Increased Significantly in Recent Years. This Paper Reports the Results of an Extensive Survey of Experimental Data of More Than 1700 SCC Mixtures from over 100 Studies Published in the Last Decade. the Survey Included the SCC Mixture Proportioning, Key Fresh Properties Including Flowability, Passing Ability, and Segregation Resistance, as Well as Some of the Derived Properties (E.g., Paste Volume). the Statistical Analysis of the Reported Parameters Showed Wide Variations in Values. the Outcome of the Survey Indicates that SCC Mixture Design and Workability Properties Do Not Systematically …

Design And Performance Of Fiber-Reinforced Shrinkage Compensating Eco-Friendly Concrete, Kamran Aghaee, Kamal Khayat

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Eco-Crete is an ecological and economical concrete that benefits from high packing density of solid materials and reduced paste. Eco-Crete can enhance the service life of structures by reducing the risk of shrinkage cracking. In this study, shrinkage mitigating materials included an expansive agent (EA), a shrinkage reducing admixture (SRA), and a lightweight sand (LWS), as well as steel and synthetic fibers were used to minimize the risk of cracking. A total of 35 fiber-reinforced Eco-Crete mixtures were prepared with 350 kg/m3 of cementitious materials and 55 % substitution of fly ash and slag. Key fresh and mechanical properties in …

Truck Platooning Reshapes Greenhouse Gas Emissions Of The Integrated Vehicle-Road Infrastructure System, Huailei Cheng, Yuhong Wang, Dan Chong, Chao Xia, Lijun Sun, Jenny Liu, Kun Gao, Ruikang Yang, Tian Jin

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Reducing greenhouse gas emissions has turned into a pillar of climate change mitigation. Truck platooning is proposed as a strategy to lower emissions from vehicles on roads. However, the potential interactive impacts of this technology on road infrastructure emissions remain unclear. Here, we evaluate the decarbonization effects of truck platooning on the integrated vehicle-road system at a large-scale road network level, spanning 1457 road sections across North America. We show that truck platooning decreases emissions induced by truck operations, but it degrades faster the durability of road infrastructure and leads to a 27.9% rise in road emissions due to more …

Effectiveness Of The Different Eutectic Phase-Change Materials In Cooling Asphalt Pavement, Jiasheng Dai, Feng Ma, Zhen Fu, Jenny Liu, Chen Li, Yingjie Hou, Hanli Wu

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Choosing a Phase-Change Material (PCM) Adapted to the Specific Phase-Change Temperature (Tm) Required for Each Temperature Condition is of Utmost Importance in Cooling Pavements. Eutectic Phase-Change Materials (EPCMs) Realize the Customization of the Desired Tm and Reduce the Difficulty of Matching PCMs. This Work Aims to Investigate the Effectiveness of a Group of Binary/ternary EPCMs with Tm Ranging from 30 to 60 ℃ and Melting Enthalpies of Around 200 J/g as Thermal Regulation Components for Different Asphalt. to Achieve This Goal, the Thermal and Rheological Properties of Phase-Change Asphalt Binders (PCAB) Were Evaluated by Differential Scanning Calorimeter, Thermogravimetric, Fourier Transform …

International Information Management And Bim Best Practice Report, Ted Mckenna, Davitt Lamon

Reports

In order to inform the Digital Leadership and Cultural Change pillar of the Build Digital, a study of international best practice in digital adoption within the built environment sector globally was undertaken and is presented here-in. In order to identify key learnings for Ireland in the context of digital transformation, eight countries were included in this study, namely, Denmark, Finland, Netherlands, Germany, United Kingdom (UK), New Zealand, Australia and Singapore. These countries were selected for various reasons, including the level of digital maturity, the scale of the built environment sector and geographic spread. Key data for each country is included …

Sustainability And Circular Economy Horizon Scan And Needs Analysis, Sadaf Dalirazar, Mark Kelly, Derek Sinnott, James O'Donnell

Reports

The construction industry plays a crucial role in addressing the climate crisis as it is the largest global consumer of raw materials and contributes significantly to global energy consumption and emissions. Considering the world’s continuous population growth and the imperative to address infrastructure and housing demands the construction sector needs to adopt further sustainable strategies in its activities to reduce the pressure on natural resources. In addition, the Architecture, Engineering, and Construction (AEC) sector is responsible for generating substantial amount of waste known as Construction and Demolition Waste (CDW), which is projected to increase due to the future construction developments. …

Information Management And Bim Standards And Supports Inventory, Ryan Dempsey, Barry Mcauley, David Burke

Tools

The Digital Standards pillar consists of industry experts who champion the benefits of common rules, guidelines, and workflows that facilitate the improvement of information flow and information management across asset life cycles. Digital standards provide a common language that can be translated to technical specifications enabling clients, designers, contractors, and facilities managers, irrespective of their preferred tools, to communicate efficiently and reduce cost, rework, and disputes. Working closely with the Digital Procurement and Digital Education and Training pillars, this pillar is developing and delivering Irish Information Management/BIM (Digital Construction) guidelines for the sector.

This report summarises existing digital construction standards, …

Digital Construction Annual Survey 2022 Report, Davitt Lamon, Ted Mckenna

Reports

The Annual Survey 2022 was conducted to assess the state of digital transformation in the Irish construction and built environment sector. This report presents the analysis of survey data, with a focus on implications for the Build Digital project and Build Digital’s five pillars: Digital Leadership & Cultural Change, Digital Standards, Digital Education & Training, Digital Procurement, and Sustainability & Circular Economy. Key findings from the survey indicated that a significant number of organisations have started their digital transformation journey, with many identifying themselves as proactive and possessing a clear business-focused strategy. However, a considerable cohort of respondents are keen …

Cement-Based Materials With Solid-Gel Phase Change Materials For Improving Energy Efficiency Of Building Envelope, Zhuo Liu, Jiang Du, Ryan Steere, Joshua P. Schlegel, Kamal Khayat, Weina Meng

Nuclear Engineering and Radiation Science Faculty Research & Creative Works

This paper evaluated the cement-based materials incorporated with novel solid-gel phase change materials (PCMs) for improving the energy efficiency of building envelopes. This novel PCM is form-stable, which will not leak as solid-liquid PCMs do and not need encapsulation, and it features high energy-storage capacity. Experimental results showed that the thermal properties of cement-based materials were improved as the increase of PCM content. A 30% replacement of sand by volume with PCM can increase the latent heat of the mixture from around 0 to 7 J/g and decrease the thermal conductivity of PCM mortar based on the generalized self-consistent (GSC) …