Open Access. Powered by Scholars. Published by Universities.®
Catalysis and Reaction Engineering Commons™
Open Access. Powered by Scholars. Published by Universities.®
- Publication Type
Articles 1 - 10 of 10
Full-Text Articles in Catalysis and Reaction Engineering
A Promising Modification Of Pt Surfaces With Cnts For Decreasing Poisoning Impact In Direct Methanol Fuel Cells, Islam M. Al-Akraa Dr., Yaser M. Asal Mr, Aya A. Khalifa Ms.
A Promising Modification Of Pt Surfaces With Cnts For Decreasing Poisoning Impact In Direct Methanol Fuel Cells, Islam M. Al-Akraa Dr., Yaser M. Asal Mr, Aya A. Khalifa Ms.
Chemical Engineering
Direct methanol fuel cells (DMFCs) are clean energy sources that have many applications due to the high energy density of methanol as a fuel. However, this type of fuel cells (FCs) has limitations that are preventing it from being commercialized. One such limitation is the adsorption of intermediates such as CO into the surface of the Platinum (Pt) catalyst during methanol oxidation (MO) which deactivates its active sites, where the reaction is taking place, and leads to poisoning of the electrode over the long term. In this study, multi-walled carbon nanotubes (MWCNTs) have been introduced to the Pt-modified glassy carbon …
Enhanced Electro-Oxidation Of Methanol At Pt-Au Nanocatalyst For Direct Methanol Fuel Cells, Islam M. Al-Akraa Dr., Yaser M. Asal Mr, Ahmad M. Mohammad Prof
Enhanced Electro-Oxidation Of Methanol At Pt-Au Nanocatalyst For Direct Methanol Fuel Cells, Islam M. Al-Akraa Dr., Yaser M. Asal Mr, Ahmad M. Mohammad Prof
Chemical Engineering
In this investigation, a Pt-Au nanocatalyst prepared by the coelectrodeposition of Pt (PtNPs) and Au (AuNPs) nanoparticles is assembled onto a glassy carbon (GC) electrode for efficient methanol oxidation (MO). Several molar ratios between PtNPs and AuNPs have been used and the corresponding catalytic activity towards MO is tracked. The Pt1:Au1 catalyst showed the highest catalytic activity (5 times higher oxidation peak current (Ip) and a 126 mV negative shift in the onset potential (Eonset) toward MO). The catalyst’s morphology, composition and activity are investigated and the ehancement mechanism is recognized.
Tungsten Carbide/Carbon Electrode Material Synthesized By Block Copolymer Template Method, Xiao-Ling Lang, Ye-Kun Jiang, Mei-Qin Shi, Ling-Zhi Kang, Chun-An Ma
Tungsten Carbide/Carbon Electrode Material Synthesized By Block Copolymer Template Method, Xiao-Ling Lang, Ye-Kun Jiang, Mei-Qin Shi, Ling-Zhi Kang, Chun-An Ma
Journal of Electrochemistry
At present, one of the major hurdles for commercialization of system with direct methanol fuel cell (DMFC) is still the requirement of a significant amount of platinum (Pt) catalyst to achieve an acceptable power density. Pt and Pt-based metals are expensive due to limited supplies. In order to find the catalyst alternative to the Pt metal, we selected tungsten carbide (WC) and its composites as the study object. We synthesized WC with carbon materials as the suitable support to modify the electronic structure and to increase the specific surface area of WC. In this study, tungsten carbide/carbon (WC/C) was prepared …
Preparation Of Pt-Tio2/Graphene Composites With High Catalytic Activity Towards Methanol Oxidation And Oxygen Reduction Reaction, Li Qi, Ying Yin, Wen-Guang Tu, Bing-Bing Wu, Zhao-Sheng Wang, Jian-Guo Liu, Jun Gu, Zhi-Gang Zou
Preparation Of Pt-Tio2/Graphene Composites With High Catalytic Activity Towards Methanol Oxidation And Oxygen Reduction Reaction, Li Qi, Ying Yin, Wen-Guang Tu, Bing-Bing Wu, Zhao-Sheng Wang, Jian-Guo Liu, Jun Gu, Zhi-Gang Zou
Journal of Electrochemistry
A series of graphene-supported TiO2 nanoparticles (TiO2/G) with different TiO2 contents were prepared by a facile hydrothermal method, and then the Pt-TiO2/G catalysts were successfully prepared by reducing Pt-precursor with microwave technique. Compared with Pt-G catalysts, the catalytic performance toward oxygen reduction reaction (ORR) and methanol oxidation reaction (MOR) of Pt-TiO2/G catalysts was improved due to the addition of TiO2. However, the excessive TiO2 would lead to a poor catalytic performance of Pt-TiO2/G catalysts because of the low electrical conductivity of TiO2.
An In Situ Ftir Spectroelectrochemical Study On Methanol Oxidation At Pt-Mo2c/Gc Catalyst, Hai-Ping Huang, Xi-Yu Yao, Pei-Kang Shen
An In Situ Ftir Spectroelectrochemical Study On Methanol Oxidation At Pt-Mo2c/Gc Catalyst, Hai-Ping Huang, Xi-Yu Yao, Pei-Kang Shen
Journal of Electrochemistry
A 40% Pt on Mo2C/GC catalyst has been prepared by ion exchange method. The mechanism of methanol electrooxidation on Pt-Mo2C/GC and commercial Pt/C catalysts in acidic media was studied by cyclic voltammetry, XRD measurements and in-situ Fourier transform infrared spectroelectrochemistry. The results revealed that the Pt nanoparticles were uniformly dispersed on Mo2C/GC with an average particle size of 3 nm. The cyclic voltammetric and chronopotentiometric experiments indicated that Pt-Mo2C/GC catalyst exhibited a better performance for methanol oxidation than that of Pt/C in acid solution. A negative shift over 90 mV of the onset potential for methanol oxidation was found on …
Methodological Significance Of "Property-Activity Relationship" For Catalyst Studies, Jun-Tao Lu, Li Xiao, De-Li Wang, Yu-Bao Sun, Yan-Ge Suo, Lin Zhuang
Methodological Significance Of "Property-Activity Relationship" For Catalyst Studies, Jun-Tao Lu, Li Xiao, De-Li Wang, Yu-Bao Sun, Yan-Ge Suo, Lin Zhuang
Journal of Electrochemistry
Instead of attempting the structure-activity relationship (SAR), which is commonly regarded as the core problem for catalyst studies, this paper highlights the methodological significance of “property-activity relationship (PAR)”. The “property” here refers to an index （such as the adsorption energy of an intermediate） or a group of indexes reflecting the behavior of a catalyst which interacts with reactants or intermediates, and is a bridge between structure and activity. Because property is related to activity more directly than structure to activity, PAR should be simpler, less difficult and, therefore, more feasible to be accessed than SAR. Once the key property is …
A Titanium-Supported Nanoporous Pd Electrocatalyst For Methanol Oxidation, Feng-Juan Niu, Qing-Feng Yi
A Titanium-Supported Nanoporous Pd Electrocatalyst For Methanol Oxidation, Feng-Juan Niu, Qing-Feng Yi
Journal of Electrochemistry
Titanium-supported nanoporous palladium electrode(nanoPd /Ti) was prepared by a hydrothermal process in the presence of the ligand EDTA and using formaldehyde as reducing agent.SEM images showed that the size of Pd particles was about 60 nm and the Pd particles were connected with each other to form a three-dimensional network structure.Cyclic voltammetry(CV) and electrochemical impedance spectroscopy(EIS) were applied to evaluate the electrocatalytic activity of the nanoPd/Ti electrode towards methanol oxidation in alkaline solution.CV results showed that the nanoPd /Ti electrode presented high anodic peak densities and a low onset potential for methanol oxidation.Also nanoPd /Ti electrode showed excellent CO tolerance …
Comparative Study Of Nanoporous Pt,Ptru And Ptruir Catalysts Using Electrochemical Ftir Spectroscopy, M. Amussen Robert, Holt-Hindle Peter, Nigro Samantha, Chen Aicheng
Comparative Study Of Nanoporous Pt,Ptru And Ptruir Catalysts Using Electrochemical Ftir Spectroscopy, M. Amussen Robert, Holt-Hindle Peter, Nigro Samantha, Chen Aicheng
Journal of Electrochemistry
In recent years much effort has been put towards developing efficient Pt-based electrocatalysts for applications in fuel cells. With the rising cost of precious metals such as Pt,the need to enhance the activity and to decrease the load of catalysts is prominent. Herein we report on the synthesis and comparative study of nanoporous Pt,PtRu and PtRuIr electrocatalysts. The nanoporous electrodes were fabricated using a hydrothermal method and characterized by scanning electron microscopy (SEM) ,energy dispersive spectroscopy (EDS) ,X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) . The electrocatalytic activity of the fabricated nanopo- rous materials was evaluated using both CO …
Electrocatalysis In Polymer Electrolyte Membrane Fuel Cells, Li Li, Si-Guo Chen, Xue-Qiang Qi, Yao-Qiong Wang, Meng-Bo Ji, Lan-Lan Li, Zi-Dong Wei
Electrocatalysis In Polymer Electrolyte Membrane Fuel Cells, Li Li, Si-Guo Chen, Xue-Qiang Qi, Yao-Qiong Wang, Meng-Bo Ji, Lan-Lan Li, Zi-Dong Wei
Journal of Electrochemistry
This review presents the study of Chongqing University in electrocatalysis for polymer electrolyte membrane fuel cells(PEMFCs).Based on the understanding to the performance degradation of PEMFCs' catalysts,the university has being concentrated on how to increase the activity,stability and utility of noble metal catalysts.It covers the molecular design of near-surface alloy catalysts for improvement of activity to oxygen reduction reaction(ORR) and resistance to foreign poison species,selective deposition of Pt on the so-called "three-phase interface" for a high Pt utility,and invention of anti-flooding electrode against water flooding in the catalyst layer of the membrane assemble electrode(MEA),and so on.The catalytic mechanism of electrode reactions …
Solid State Synthesis And Electrocatalysis Of Pt/Moo_3 For The Oxidation Of Methanol, Wang Qing
Solid State Synthesis And Electrocatalysis Of Pt/Moo_3 For The Oxidation Of Methanol, Wang Qing
Journal of Electrochemistry
The electrocatalyst, Pt/MoO_(3) synthesized by solid state reaction, was used for the oxidation of methanol in direct methanol fuel cells. The X-Ray diffraction and cyclic voltammetry were employed to investigate the performance of the material. It was shown that the typical diffraction peaks for Pt appeared in XRD. And a good electrocatalysis for methanol oxidation was observed. The peak potential of the methanol oxidation appeared at ca. 0.63V(vs.SCE) and the peak current density for the oxidation was 78.1 mA cm~(-2) .