Biomaterials Commons^™

Development Of A Decellularized Hydrogel Composite And Its Application In A Novel Model Of Disc-Associated Low Back Pain In Female Sprague Dawley Rats, David Lillyman

Department of Agricultural and Biological Systems Engineering: Dissertations, Theses, and Student Research

Chronic low back pain is a global socioeconomic crisis compounded by an absence of reliable, curative treatments. The predominant pathology associated with chronic low back pain is degeneration of intervertebral discs in the lumbar spine. During degeneration, nerves can sprout into the intervertebral disc tissue and be chronically subjected to inflammatory and mechanical stimuli, resulting in pain. Pain arising from the intervertebral disc, or disc-associated pain, is a complex, multi-faceted disorder which necessitates valid animal models to screen therapeutics and study pathomechanisms of pain.

While many research teams have created animal models of disc degeneration, the translation of these platforms …

Rheological Behavior Of Dspc-, Dbpc-, And Dppc-Oxygen Microbubbles And Their Effectiveness In Improving Survival In A Rat Model Of Lipopolysaccharide-Induced Acute Respiratory Distress Syndrome, Riaz Ur Rehman Mohammed

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Acute respiratory distress syndrome (ARDS) causes 75,000 deaths in the U.S., annually. It is characterized by hypoxemia and damage to the lung alveoli. ARDS Management strategies involve extracorporeal membrane oxygenation (ECMO) and mechanical ventilation, but none of these methods improve the mortality rates. Oxygen microbubbles (OMBs) consist of a lipid shell with an oxygen core and have potential to augment oxygenation to manage ARDS. Previous studies demonstrated significant improvements in systemic oxygenation and mortality upon administering OMBs.

We replicated an ARDS rat model by intratracheal administration of lipopolysaccharide at a 24 mg/kg dose. After inducing the disease in rats, the …

Comparison Effect On Biogas Production From Vegetable And Fruit Waste With Rumen Digesta Through Co-Digestion Process, Anika Tasnim, Muhammad Rashed Al Mamun, Md Anwar Hossen, Md Towfiqur Rahman, Md Janibul Alam Soeb

Biological Systems Engineering: Papers and Publications

Biogas is the best renewable energy as it can be produced from any biomass for example any plant or living organism. The purpose of this research was to produce biomethane from co-digestion of vegetable and fruit waste with rumen digesta through anaerobic digestion process. In this research, two trials of experiment were conducted. Each trial has three different sample with different mixing ratios. Raw materials used in the experiment was rumen digesta of goat and cow, potato, capsicum, cucumbers, onions, radish, cauliflower, carrot, leafy vegetables, apple, banana, and papaya. In each sample, 1200 gram of raw materials were used. Hydraulic …

Development And Characterization Of A Decellularized Neuroinhibitory Scaffold Containing Matrix Bound Nanovesicles, Logan Piening

Department of Agricultural and Biological Systems Engineering: Dissertations, Theses, and Student Research

Chronic low back pain (LBP) is a leading cause of disability but treatments for LBP are limited. Degeneration of the intervertebral disc leads to loss of neuroinhibitory sulfated glycosaminoglycans (sGAGs) which allows nerves from dorsal root ganglia (DRG) to grow into the core of the disc, leading to pain. Current treatments for LBP involve drugs that do not target the source of the pain and lack long term efficacy or use invasive surgeries with high complication rates. Treatment with a decellularized tissue scaffold that contains neuroinhibitory components may inhibit nerve growth and prevent disc-associated LBP. Here, a decellularized nucleus pulposus …

Novel Approaches For Enhancing Cell Survival And Function In Vivo, Ou Wang

Department of Chemical and Biomolecular Engineering: Theses and Student Research

FDA has approved several cell-based therapeutics and hundreds of cell therapy clinical trials are ongoing. Cells will be a significant type of medicine after small molecule and protein drugs. However, several obstacles need to be addressed to achieve the widespread use of cellular therapeutics. The first challenge is the low efficacy of cell transplantation due to low retention, survival, integration, and function of cells in vivo. The second challenge is producing a massive number of cells for clinical treatment with cost-effectively and reproducibly technologies.

In this thesis, we proposed and investigated two approaches to address these challenges. To begin …

A Single Cell Pair Mechanical Interrogation Platform To Study Cell-Cell Adhesion Mechanics, Amir Monemianesfahani

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Cell-cell adhesion complexes are macromolecular adhesive organelles that integrate cells into tissues. Perturbations of the cell-cell adhesion structure or relatedmechanotransduction pathways lead to pathological conditions such as skin and heart diseases, arthritis, and cancer. Mechanical stretching has been used to stimulate the mechanotransduction process originating from the cell-cell adhesion and cell-extracellular matrix (ECM) complexes. The current techniques, however, have limitations on their ability to measure the cell-cell adhesion force directly and quantitatively. These methods use a monolayer of cells, which makes it impossible to quantify the forces within a single cell-cell adhesion complex. Other methods using single cells or cell …

Efficient Polyhydroxyalkanoate Production By Rhodopseudomonas Palustris From Lignocellulosic Biomass, Brandi Brown

Department of Agricultural and Biological Systems Engineering: Dissertations, Theses, and Student Research

Polyhydroxyalkanoates (PHAs) are biopolymers produced by bacteria with the potential to replace conventional plastics. However, the relatively high production costs of PHAs are keeping them from market acceptance, with approximately half of the production costs derived from the feedstock. Thus, engineering a microbe for PHA production from cheaper and renewable carbon sources is necessary to promote the valorization of PHAs. Lignocellulosic biomass is considered to be one of the most economic carbon sources in the world, and is thus an attractive candidate for cheaper production of bioplastics. Rhodopseudomonas palustris CGA009 is a metabolically robust bacterium capable of catabolizing lignin breakdown …

Biotech Connector Brochure

Biotech Connector

The Biotech Connector represents an important opportunity to serve the economic needs of the people of Nebraska through further diversification of Nebraska's economy, and by helping forge and illuminate a pathway to jobs in the biotechnology space for Nebraska students.

The Biotech Connector is 7,700 sq. ft. of well-equipped wet-lab space located on Nebraska Innovation Campus. We provide incubation space and services to bioscience startups and high-growth biotech and research-based businesses.

Wet lab space provides aspiring startups and technology businesses with access to very expensive laboratory equipment that would be outside of the budget of most startups. Lack of access …

Integration Of Biology, Ecology And Engineering For Sustainable Algal‑Based Biofuel And Bioproduct Biorefinery, James Allen, Serpil Unlu, Yaşar Demirel, Paul N. Black, Wayne R. Riekhof

Department of Chemical and Biomolecular Engineering: Faculty Publications

Despite years of concerted research efforts, an industrial-scale technology has yet to emerge for production and conversion of algal biomass into biofuels and bioproducts. The objective of this review is to explore the ways of possible integration of biology, ecology and engineering for sustainable large algal cultivation and biofuel production systems. Beside the costs of nutrients, such as nitrogen and phosphorous, and fresh water, upstream technologies which are not ready for commercialization both impede economic feasibility and conflict with the ecological benefits in the sector. Focusing mainly on the engineering side of chemical conversion of algae to biodiesel has also …

A Tunable, Three-Dimensional In Vitro Culture Model Of Growth Plate Cartilage Using Alginate Hydrogel Scaffolds, Alek G. Erickson, Taylor D. Laughlin, Sarah Romereim, Catherine Sargus-Patino, Angela K. Pannier, Andrew T. Dudley

Biological Systems Engineering: Papers and Publications

Defining the final size and geometry of engineered tissues through precise control of the scalar and vector components of tissue growth is a necessary benchmark for regenerative medicine, but it has proved to be a significant challenge for tissue engineers. The growth plate cartilage that promotes elongation of the long bones is a good model system for studying morphogenetic mechanisms because cartilage is composed of a single cell type, the chondrocyte; chondrocytes are readily maintained in culture; and growth trajectory is predominately in a single vector. In this cartilage, growth is generated via a differentiation program that is spatially and …

Chitosan Nanoparticle Modifications For Improved Gene Delivery In An Oral Dna Vaccine Application, Austin Helmink

Honors Theses

Vaccines represent one of the most significant medical innovations of the 20^th century, resulting in the eradication or near eradication of a handful of deadly diseases. However, many infectious diseases remain resistant to effective vaccination, largely due to a lack full immune activation by traditional protein-based vaccines. A promising alternative vaccination strategy is the emerging development of DNA vaccines, which rely upon the delivery of exogenous genetic material to host cells encoding for a viral or bacterial antigen in order to induce a robust immune response by closely mimicking live infection. The delivery of genetic material requires a carrier …

Sugar Versus Lipid For Sustainable Biofuels, Yaşar Demirel

Yaşar Demirel Publications

Introduction

First‐generation biofuels, namely, ethanol and biodiesel, have led to far reaching impact on the peoples’ life world‐wide.[1] However, they inter-fere with the food supply chain and may not be sustainable although some of the biomass are converted to biofuels after those biomasses have met the human needs. Still, the first‐generation–based biofuels have proved that sugar and lipid platforms can be an answer to energy security and global warming concerns without the need for new infrastructure for feedstock delivery as well as for biomass‐to‐biofuel conversion tech-nologies. At the same time, we are discovering and assessing the long‐term environmental im-plications on …

Characterization Of Molecular Communication Based On Cell Metabolism Through Mutual Information And Flux Balance Analysis, Zahmeeth Sayed Sakkaff

Department of Computer Science and Engineering: Dissertations, Theses, and Student Research

Synthetic biology is providing novel tools to engineer cells and access the basis of their molecular information processing, including their communication channels based on chemical reactions and molecule exchange. Molecular communication is a discipline in communication engineering that studies these types of communications and ways to exploit them for novel purposes, such as the development of ubiquitous and heterogeneous communication networks to interconnect biological cells with nano and biotechnology-enabled devices, i.e., the Internet of Bio-Nano Things. One major problem in realizing these goals stands in the development of reliable techniques to control the engineered cells and their behavior from the …

Alginate Hydrogels As Three-Dimensional Scaffolds For In Vitro Culture Models Of Growth Plate Cartilage Development And Porcine Embryo Elongation, Taylor D. Laughlin

Department of Agricultural and Biological Systems Engineering: Dissertations, Theses, and Student Research

The establishment of in vitro culture models utilizes tissue engineering principles to design functional mimics of in vivo environments in vitro. Advantages for the use of in vitro culture models include ethical alleviation of animal models for therapeutic testing, cost efficiency, and a greater ability to study specific mechanisms via a systematic, ground-up approach to development. In this thesis, alginate hydrogels are utilized in the development of in vitro culture models of porcine embryo elongation and growth plate cartilage development. First, the effect of scaffold and modifications to the scaffold were explored in both projects. In order to modulate …

Interaction Of Fibrinogen With Fibronectin: Purification And Characterization Of A Room Temperature-Stable Fibrinogen-Fibronectin Complex From Normal Human Plasma, Ayman E. Ismail

Department of Chemical and Biomolecular Engineering: Theses and Student Research

A fibrinogen-fibronectin complex (γγ’pdFI-pdFN) was purified from normal human plasma using a sequence of cryoprecipitation, ammonium sulfate fractionation, and DEAE Sepharose chromatography. Sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE) under reducing condition showed both a 1:1 stoichiometric ratio of fibrinogen (FI) to fibronectin (FN) as well as a stoichiometric ratio of 1:1 of γg to gγ’. The γγ’pdFI-pdFN complex was non-covalent in nature as it was disrupted by affinity adsorption to Gelatin Sepharose where pdFN bound strongly and the disrupted γγ’pdFI fell through the chromatographic column. Surprisingly, the purified γγ’pdFI-pdFN complex was more broadly thermally stable than plasma FI (pdFI) …

Patterned Alginate Hydrogels To Induce Chondrocyte Alignment, Jordan Catherine Verplank, Taylor D. Laughlin, Angela K. Pannier

UCARE Research Products

The growth plate has an intricate architecture, and this architecture is necessary for directional growth of bones. Specifically, the cells align in longitudinal columns. As the growth plate expands with this pattern, the bone elongates with the same alignment pattern. The purpose of this research is to mimic this single celled, columnar alignment in vitro. In developing this alignment in vitro, this research will contribute to the overall study of growing growth for the development of improved therapeutic treatments and engineered tissues for transplants.

A Scalable Low-Cost Cgmp Process For Clinical Grade Production Of The Hiv Inhibitor 5p12-Rantes In Pichia Pastoris, Fabrice Cerini, Hubert Gaertner, Knut Madden, Ilya Tolstorukov, Scott Brown, Bram Laukens, Nico Callewaert, Jay C. Harner, Anna M. Oommen, John T. Harms, Anthony R. Sump, Robert C. Sealock, Dustin J. Peterson, Scott K. Johnson, Stephan B. Abramson, Michael M. Meagher, Robin Offord, Oliver Hartley

Department of Chemical and Biomolecular Engineering: Faculty Publications

In the continued absence of an effective anti-HIV vaccine, approximately 2 million new HIV infections occur every year, with over 95% of these in developing countries. Calls have been made for the development of anti-HIV drugs that can be formulated for topical use to prevent HIV transmission during sexual intercourse. Because these drugs are principally destined for use in low-resource regions, achieving production costs that are as low as possible is an absolute requirement. 5P12-RANTES, an analog of the human chemokine protein RANTES/CCL5, is a highly potent HIV entry inhibitor which acts by achieving potent blockade of the principal HIV …

Breast Cancer/Stromal Cells Coculture On Polyelectrolyte Films Emulates Tumor Stages And Mirna Profiles Of Clinical Samples, Amita Daverey, Karleen M. Brown, Srivatsan Kidambi

Department of Chemical and Biomolecular Engineering: Faculty Publications

In this study, we demonstrate a method for controlling breast cancer cells adhesion on polyelectrolyte multilayer (PEM) films without the aid of adhesive proteins/ ligands to study the role of tumor and stromal cell interaction on cancer biology. Numerous studies have explored engineering coculture of tumor and stromal cells predominantly using transwell coculture of stromal cells cultured onto coverslips that were subsequently added to tumor cell cultures. However, these systems imposed an artificial boundary that precluded cell−cell interactions. To our knowledge, this is the first demonstration of patterned coculture of tumor cells and stromal cells that captures the temporal changes …

Low Molecular Weight Glucosamine/L-Lactide Copolymers As Potential Carriers For The Development Of A Sustained Rifampicin Release System: Mycobacterium Smegmatis As A Tuberculosis Model, Jorge Ragusa

Department of Chemical and Biomolecular Engineering: Theses and Student Research

Tuberculosis, a highly contagious disease, ranks as the second leading cause of death from an infectious disease, and remains a major global health problem. In 2013, 9 million new cases were diagnosed and 1.5 million people died worldwide from tuberculosis. This dissertation aims at developing a new, ultrafine particle-based efficient antibiotic delivery system for the treatment of tuberculosis. The carrier material to make the rifampicin (RIF)-loaded particles is a low molecular weight star-shaped polymer produced from glucosamine (molecular core building unit) and L-lactide (GluN-LLA). Stable particles with a very high 50% drug loading capacity were made via electrohydrodynamic atomization. Prolonged …

Application Of Limited Mixing In The Hele-Shaw Geometry In Fabrication Of Janus Hydrogels, Md Mahmudur Rahman

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

It is widely accepted that cells behave differently responding to the stiffness of their extracellular matrix (ECM). Such observations were made by culturing cells on hydrogel substrates of tunable stiffness. However, it was recently proposed that cells may sense how strongly they are tethered to ECM, not the local stiffness of ECM. To investigate both hypotheses, we developed a method to fabricate Janus polyacrylamide (PAAM) gels. We squeeze two drops of different concentrations in the Hele-Shaw geometry to generate radial Stokes flow. When the drops coalesce, limited mixing occurs at the interface due to the narrow confinement, and diffusion normal …

Surface- And Hydrogel-Mediated Delivery Of Nucleic Acid Nanoparticles, Angela K. Pannier, Tatiana Segura

Biological Systems Engineering: Papers and Publications

Gene expression within a cell population can be directly altered through gene delivery approaches. Traditionally for nonviral delivery, plasmids or siRNA molecules, encoding or targeting the gene of interest, are packaged within nanoparticles. These nanoparticles are then delivered to the media surrounding cells seeded onto tissue culture plastic; this technique is termed bolus delivery. Although bolus delivery is widely utilized to screen for efficient delivery vehicles and to study gene function in vitro, this delivery strategy may not result in efficient gene transfer for all cell types or may not identify those delivery vehicles that will be efficient in vivo. …

Propagation Of Ultrasound Through Freshly Excised Human Calvarium, Armando Garcia Noguera

Department of Engineering Mechanics: Dissertations, Theses, and Student Research

The propagation of ultrasound through complex biological media, such as the human calvarium, poses a great challenge for modern medicine. Several ultrasonic techniques commonly used for treatment and diagnosis in most of the human body are still difficult to apply to the human brain, in part, because of the properties of the skull. Moreover, an understanding of the biomechanics of transcranial ultrasound may provide needed insight into the problem of blast wave induced traumatic brain injury (TBI). In the present study, the spatial variability of ultrasonic properties was evaluated for relevant frequencies of 0.5, 1, and 2.25 MHz. A total …

Effect Of Extracellular Matrix (Ecm) Protein Micropatterns On The Behavior Of Human Neuroblastoma Cells, Ishwari Poudel

Department of Engineering Mechanics: Dissertations, Theses, and Student Research

Recent advances in patterning techniques and emerging surface microtechnologies have allowed cell micropatterning to control spatial location of the cells on a surface as well as cell shape, attachment area, and number of contacting neighbor cells. These parameters play important roles in cell cellular behaviors. Cell micropatterning has thus become one of the most important strategies for biomedical applications, such as, tissue engineering, diagnostic immunoassays, lab-on-chip devices, bio-sensing, etc., and cell biology studies as well. For neuronal cells, there have been attempts to distribute neuronal cells on specific patterns to control cell-to-cell interaction. However, there have been very limited understanding …

Using Thermally Coupled Reactive Distillation Columns In Biodiesel Production, Nghi Nguyen, Yaşar Demirel

Yaşar Demirel Publications

Production of ethyl dodecanoate (biodiesel) using lauric acid and methanol with a solid acid catalyst of sulfated zirconia is studied by using two distillation sequences. In the first sequence, the methanol recovery column follows the reactive distillation column. In the second sequence, the reactive distillation and methanol recovery columns are thermally coupled. Thermally coupled distillation sequences may consume less energy by allowing interconnecting vapor and liquid streams between the two columns to elminate reboiler or condenser or both. Here we study the thermally coupled side-stripper reactive distillation and eliminate the condenser of the reactive distillation column. Both the sequences are …

Synthesis Of An Endothelial Cell Mimicking Surface Containing Thrombomodulin And Endothelial Protein C Receptor, Karl E. Kador

Department of Chemical and Biomolecular Engineering: Theses and Student Research

Synthetic materials for use in blood contacting applications have been studied for many years with limited success. One of the main areas of need for these materials is the design of synthetic vascular grafts for use in the hundreds of thousands of patients who have coronary artery bypass grafting, many without suitable veins for autologous grafts. The design of these grafts is constrained by two common modes of failure, the formation of intimal hyperplasia (IH) and thrombosis. IH formation has been previously linked to a mismatching of the mechanical properties of the graft and has been overcome by creating grafts …

, Geun-Cheol Gil, William H. Velander, Kevin E. Van Cott

Kevin Van Cott Publications

Human protein C (hPC) is glycosylated at three Asn-X-Ser/Thr and one atypical Asn-X-Cys sequons. We have characterized the micro- and macro-heterogeneity of plasma-derived hPC and compared the glycosylation features with recombinant protein C (tg-PC) produced in a transgenic pig bioreactor from two animals having approximately tenfold different expression levels. The N-glycans of hPC are complex di- and tri-sialylated structures, and we measured 78% site occupancy at Asn-329 (the Asn-X-Cys sequon). The N-glycans of tg-PC are complex sialylated structures, but less branched and partially sialylated. The porcine mammary epithelial cells glycosylate the Asn-X-Cys sequon with a similar efficiency as human hepatocytes …

Retrofit Of Distillation Columns In Biodiesel Production Plants, Nghi Nguyen, Yaşar Demirel

Yaşar Demirel Publications

Column grand composite curves and the exergy loss profiles produced by the Column-Targeting Tool of the Aspen Plus simulator are used to assess the performance of the existing distillation columns, and reduce the costs of operation by appropriate retrofits in a biodiesel production plant. Effectiveness of the retrofits is assessed by means of thermodynamics and economic improvements. We have considered a biodiesel plant utilizing three distillation columns to purify biodiesel (fatty acid methyl ester) and byproduct glycerol as well as reduce the waste. The assessments of the base case simulation have indicated the need for modifications for the distillation columns. …

Influence Of Van Der Waals Forces On Increasing The Strength And Toughness In Dynamic Fracture Of Nanofibre Networks: A Peridynamic Approach, Florin Bobaru Ph.D.

Department of Engineering Mechanics: Faculty Publications

The peridynamic method is used here to analyse the effect of van der Waals forces on the mechanical behaviour and strength and toughness properties of three-dimensional nanofibre networks under imposed stretch deformation. The peridynamic formulation allows for a natural inclusion of long-range forces (such as van der Waals forces) by considering all interactions as ‘long-range’. We use van der Waals interactions only between different fibres and do not need to model individual atoms. Fracture is introduced at the microstructural (peridynamic bond) level for the microelastic type bonds, while van der Waals bonds can reform at any time. We conduct statistical …

Immobilized Pseudornonas Cepacia Lipase For Biodiesel Fuel Production From Soybean Oil,, Hossein Noureddini, X Gao, R S. Philkana

Papers in Biomaterials

No abstract provided.

A Continuous Process For The Glycerolysis Of Soybean Oil , Hossein Noureddini, D W. Harkey, M R. Gutsman

Papers in Biomaterials

A continuous process for the glycerolysis of soybean oil with pure and crude glycerol, the co-product from the transesterification of soybean oil was investigated in a pilot plant. The process was equipped with a motionless and a high-shear mixer. The experimental studies explored the effects of variations in mixing intensity, temperature, reactant flow rates, and reactant stoichiometry on the formation of MG and DC. The developed process resulted in high conversion of TC to MC. The most favorable conditions were 230°C, 40 mL/min total flow, 25 mm of reaction time, 2.5:1 molar ratio of glycerol/soybean oil, and 3600 rpm for …