Biomedical Engineering and Bioengineering Commons^™

Digital Twins Of The Living Knee: From Measurements To Model, Thor Erik Andreassen

Electronic Theses and Dissertations

Modern medicine has dramatically improved the lives of many. In orthopaedics, robotic surgery has given clinicians superior accuracy when performing interventions over conventional methods. Nevertheless, while these and many other methods are available to ensure treatments are performed successfully, far fewer methods exist to predict the proper treatment option for a given person. Clinicians are forced to categorize individuals, choosing the best treatment on “average.” However, many individuals differ significantly from the “average” person, for which many of these treatments are designed. Going forward, a method of testing, evaluating, and predicting different treatment options' short- and long-term effects on an …

Longitudinal Case-Control Study Of Mammographic Breast Tissue Subtypes, Kendra Batchelder

Electronic Theses and Dissertations

Breast density is a known risk factor for breast cancer. However, there has been limited research on potential subtypes of mammographic dense breast tissue to identify areas of active dense tissue that is structurally reorganizing and links to cancer dynamics, versus areas of passive dense tissue which remains organized. We hypothesize that the amounts of subtypes of mammographic dense tissue and the associated rate of change through time could provide insights into breast cancer risk. A retrospective study was conducted to investigate breast cancer using longitudinal screening mammograms and accompanying pathology reports collected in 2015. Patients were matched by age …

Nanocellulose Based Foams For Low-Cost Disposable Medical Applications, Dominic Kugell

Electronic Theses and Dissertations

Polyurethane foams have been a staple material for their use in medical positioners, such as post-surgery elevation pillows as well as specific tailored positioners for their use during surgery. Polyurethane foams are preferred because of their lower cost compared to other petroleum derived foams, their versatility, and suitable mechanical properties. However, the environmental impact, including both cost and perception, of these foams is immense. Therefore, alternatives are being explored with biopolymers emerging as a promising class of materials. Cellulose is one such polymer that has recently demonstrated desirable properties. In this study, cellulose nanofibrils (CNF), a household foaming agent, and …

Patient Movement Monitoring Based On Imu And Deep Learning, Mohsen Sharifi Renani

Electronic Theses and Dissertations

Osteoarthritis (OA) is the leading cause of disability among the aging population in the United States and is frequently treated by replacing deteriorated joints with metal and plastic components. Developing better quantitative measures of movement quality to track patients longitudinally in their own homes would enable personalized treatment plans and hasten the advancement of promising new interventions. Wearable sensors and machine learning used to quantify patient movement could revolutionize the diagnosis and treatment of movement disorders. The purpose of this dissertation was to overcome technical challenges associated with the use of wearable sensors, specifically Inertial Measurement Units (IMUs), as a …

The Future Is Now In Twisted Coil Polymer Actuators (Tcpa), Ryan Ronquillo

Electronic Theses and Dissertations

This thesis aimed to fabricate and test twisted coiled polymer actuators (TCPA) to understand the mechanical and thermal aspects of this artificial muscle fiber. The purpose of this thesis was to find a linear relationship using the LVDT sensor, fabricating TCPA fibers, and interpreting the data. The project tested whether nylon/polymer could be used as a better artificial muscle fiber.

This research accomplished three goals: (1) designing and fabricating a system capable of creating supercoiled muscle fibers consistently, (2) calibrating the Linear Variable Differential Transformer (LVDT) and Core, and (3) analyzing/interpreting the data of the Twisted Coiled Polymer Actuators (TCPA) …

Hybrid Power Spectral And Wavelet Image Roughness Analysis, Basel White

Electronic Theses and Dissertations

The Two-Dimensional Wavelet Transform Modulus Maxima (2D WTMM) sliding window methodology has proven to be a robust approach, in particular for the extraction of the Hurst (H) roughness exponent from grayscale mammograms. The power spectrum is a computational analysis based on the Fourier transform that can be used to estimate the roughness of a scale-invariant image or region via the calculation of H. We aim to examine how the calculation of H in fractional Brownian motion (fBm) images and mammograms can be improved. fBm images are generated for H ∈ [0.00,1.00] for testing through the previous 2D …

The Study Of Corrosion On Additive-Manufactured Metals., Braydan Daniels

Electronic Theses and Dissertations

The purpose of this study was to investigate and compare the corrosion mechanisms between wrought and additive-manufactured (3D-printed) copper and stainless steel. The experimental procedure consisted of measuring the open circuit potential, electrochemical impedance spectroscopy, linear sweep voltammetry, Tafel analysis, surface topology, and scanning electron microscopy for each metal within salt water, tap water, sulfuric acid, and synthetic body fluid (excluding copper in synthetic body fluid).

Overall, printed stainless steel was more corrosion-resistant than wrought stainless steel in tap water and synthetic body fluid based on OCP, LSV, and surface topology results. Additionally, printed copper was more corrosion-resistant than wrought …

The Role Of Generative Adversarial Networks In Bioimage Analysis And Computational Diagnostics., Ahmed Naglah

Electronic Theses and Dissertations

Computational technologies can contribute to the modeling and simulation of the biological environments and activities towards achieving better interpretations, analysis, and understanding. With the emergence of digital pathology, we can observe an increasing demand for more innovative, effective, and efficient computational models. Under the umbrella of artificial intelligence, deep learning mimics the brain’s way in learn complex relationships through data and experiences. In the field of bioimage analysis, models usually comprise discriminative approaches such as classification and segmentation tasks. In this thesis, we study how we can use generative AI models to improve bioimage analysis tasks using Generative Adversarial Networks …

Role Of Deep Learning Techniques In Non-Invasive Diagnosis Of Human Diseases., Hisham Abouelseoud Elsayem Abdeltawab

Electronic Theses and Dissertations

Machine learning, a sub-discipline in the domain of artificial intelligence, concentrates on algorithms able to learn and/or adapt their structure (e.g., parameters) based on a set of observed data. The adaptation is performed by optimizing over a cost function. Machine learning obtained a great attention in the biomedical community because it offers a promise for improving sensitivity and/or specificity of detection and diagnosis of diseases. It also can increase objectivity of the decision making, decrease the time and effort on health care professionals during the process of disease detection and diagnosis. The potential impact of machine learning is greater than …

Gradient Generating Microfluidic Coculture System For Disease Modeling And Neural Development, Phaneendra Chennampally

Electronic Theses and Dissertations

Cellular microenvironment or cell niche plays an important role in developmental biology and disease pathophysiology. Physical or chemical signals in microenvironment drive the cellular activity. These signaling molecules are generated from the surrounding cells/tissues as part of intercellular communication; a fundamental property of a cell. Dynamic profile of these signaling molecules in the microenvironment plays a pivotal role in transfer of molecular information from cell to cell in disease proliferation or fate determination. Recapitulating these signaling cues in an in vitro study is difficult to achieve using standard cell culture techniques. However microfluidic systems are capable of addressing these issues, …

Evaluation Of Drug-Loaded Gold Nanoparticle Cytotoxicity As A Function Of Tumor Tissue Heterogeneity., Hunter Allan Miller

Electronic Theses and Dissertations

The inherent heterogeneity of tumor tissue presents a major challenge to nanoparticle-medicated drug delivery. This heterogeneity spans from the molecular to the cellular (cell types) and to the tissue (vasculature, extra-cellular matrix) scales. Here we employ computational modeling to evaluate therapeutic response as a function of vascular-induced tumor tissue heterogeneity. Using data with three-layered gold nanoparticles loaded with cisplatin, nanotherapy is simulated with different levels of tissue heterogeneity, and the treatment response is measured in terms of tumor regression. The results show that tumor vascular density non-trivially influences the nanoparticle uptake and washout, and the associated tissue response. The drug …

Longitudinal Tracking Of Physiological State With Electromyographic Signals., Robert Warren Stallard

Electronic Theses and Dissertations

Electrophysiological measurements have been used in recent history to classify instantaneous physiological configurations, e.g., hand gestures. This work investigates the feasibility of working with changes in physiological configurations over time (i.e., longitudinally) using a variety of algorithms from the machine learning domain. We demonstrate a high degree of classification accuracy for a binary classification problem derived from electromyography measurements before and after a 35-day bedrest. The problem difficulty is increased with a more dynamic experiment testing for changes in astronaut sensorimotor performance by taking electromyography and force plate measurements before, during, and after a jump from a small platform. A …

Anatomy, Implant Selection And Placement Influence Spine Mechanics Associated With Total Disc Replacement, Justin F.M. Hollenbeck

Electronic Theses and Dissertations

Through aging and injury, the intervertebral disc of the lumbar spine can undergo degeneration, leading to collapse of the vertebrae and low back pain, a symptom that affects half the adult population in any given year. In an effort to reduce low back pain, total disc replacement treatment removes the degenerated disc, restores natural height and lordosis of the segment, and preserves motion at the joint. Patient anatomy, implant selection, and implant placement play significant roles in a patient's outcomes after total disc replacement surgery. Thus, the objective of the work presented in this thesis was to develop a suite …

Study Of Immobilizing Cadmium Selenide Quantum Dots In Selected Polymers For Application In Peroxyoxalate Chemiluminescence Flow Injection Analysis, Christopher S. Moore

Electronic Theses and Dissertations

Two batches of CdSe QDs with different sizes were synthesized for immobilizing in polyisoprene (PI), polymethylmethacrylate (PMMA), and low-density polyethylene (LDPE). The combinations of QDs and polymer substrates were evaluated for their analytical fit-for-use in applicable immunoassays. Hydrogen peroxide standards were injected into the flow injection analyzer (FIA) constructed to simulate enzyme-generated hydrogen peroxide reacting with bis-(2,4,6-trichlorophenyl) oxalate.

Linear correlations between hydrogen peroxide and chemilumenscent intensities yielded regression values greater than 0.9750 for hydrogen peroxide concentrations between 1.0 x 10^-4 M and 1.0 x 10^-1 M. The developed technique’s LOD was approximately 10 ppm. Variability of the prepared …