Biomedical Engineering and Bioengineering Commons^™

Going Green: Experimental Adaptation Of Scenedesmus Dimorphus To Marine Conditions, Mohammed Khalil

Undergraduate Research Posters 2017

Algae has gained some interest as the need for alternative fuels becomes more pressing. Reliance on fossil fuels is causing our environment and economy harm, and is not sustainable moving forward. Lipid rich algae strains can be used in the production of biofuels, and provide an alternative fuel source. One challenge facing the prospect of algae as a fuel source is that lipid rich algae grows exclusively in freshwater. Considering the scarcity and cost to use freshwater for algae growth, interest has grown in the possibility of adapting lipid rich, freshwater algae to a seawater environment. Seawater can have up …

Development And Verification Of A Mechanical Loading Device For Microfluidics, Stefan Habean, Erin Tesny

Undergraduate Research Posters 2017

Establishing the role that mechanics play in nerve cell (e.g. neurons) function requires experimental testing. Microfluidic based experiments are commonly used to study neuron growth and function, and studies have found mechanics to play an important role in neuron health. External loads can be applied to a microfluidic device using a motor, which presumably influences the mechanical environment of the cells. While a motor can easily apply known displacements, a “load cell” is necessary to measure corresponding forces. In an existing prototype microfluidic loading device, a load cell was integrated and verified. The manufacturer's calibration of the load cell was …

Sugar Versus Lipid For Sustainable Biofuels, Yaşar Demirel

Yaşar Demirel Publications

Introduction

First‐generation biofuels, namely, ethanol and biodiesel, have led to far reaching impact on the peoples’ life world‐wide.[1] However, they inter-fere with the food supply chain and may not be sustainable although some of the biomass are converted to biofuels after those biomasses have met the human needs. Still, the first‐generation–based biofuels have proved that sugar and lipid platforms can be an answer to energy security and global warming concerns without the need for new infrastructure for feedstock delivery as well as for biomass‐to‐biofuel conversion tech-nologies. At the same time, we are discovering and assessing the long‐term environmental im-plications on …

Fabrication Of Flexible, Biofunctional Architectures From Silk Proteins, Ramendra K. Pal

Theses and Dissertations

Advances in the biomedical field require functional materials and processes that can lead to devices that are biocompatible, and biodegradable while maintaining high performance and mechanical conformability. In this context, a current shift in focus is towards natural polymers as not only the structural but also functional components of such devices. This poses material-specific functionalization and fabrication related questions in the design and fabrication of such systems. Silk protein biopolymers from the silkworm show tremendous promise in this regard due to intrinsic properties: mechanical performance, optical transparency, biocompatibility, biodegradability, processability, and the ability to entrap and stabilize biomolecules. The unique …

Synthesis And Characterization Of Poly(Simvastatin) - Incorporated Copolymers And Blends For Bone Regeneration, Theodora Asafo-Adjei

Theses and Dissertations--Biomedical Engineering

Common biodegradable polyesters such as poly(lactic acid) (PLA), poly(lactic-co-glycolic acid) (PLGA) and poly(ε-caprolactone) (PCL) are used as drug delivery vehicles for tissue regenerative applications. However, they are typically bioinert, with drug loading limitations. Polymerizing the active agent or precursor into its respective biodegradable polymer would control drug loading via molar ratios of drug to initiator used for synthesis. Simvastatin was chosen due to its favorable anti-inflammatory, angiogenic, and osteogenic properties. In addition, its lactone ring lends itself to ring-opening polymerization and, consequently, the synthesis of poly(simvastatin) with controlled simvastatin release.

Simvastatin was first polymerized with a 5kDa methyl-terminated poly(ethylene glycol) …

Surface Enabled Lab-On-A-Chip (Loc) Device For Protein Detection And Separation, Zhichao Wang

Dissertations, Master's Theses and Master's Reports

Sensitive and selective chemical/biological detection/analysis for proteins is essential for applications such as disease diagnosis, species phenotype identification, product quality control, and sample examination. Lab-on-a-chip (LOC) device provides advantages of fast analysis, reduced amount of sample requirements, and low cost, to magnificently facilitate protein detection research. Isoelectric focusing (IEF) is a strong and reliable electrophoretic technique capable of discerning proteins from complex mixtures based on the isoelectric point (pI) differences. It has experienced plenty of fruitful developments during previous decades which has given it the capability of performing with highly robust and reproducible analysis. This progress has made IEF devices …

Pore-Confined Carriers And Biomolecules In Mesoporous Silica For Biomimetic Separation And Targeting, Shanshan Zhou

Theses and Dissertations--Chemical and Materials Engineering

Selectively permeable biological membranes composed of lipophilic barriers inspire the design of biomimetic carrier-mediated membranes for aqueous solute separation. This work imparts selective permeability to lipid-filled pores of silica thin film composite membranes using carrier molecules that reside in the lipophilic self-assemblies. The lipids confined inside the pores of silica are proven to be a more effective barrier than bilayers formed on the porous surface through vesicle fusion, which is critical for quantifying the function of an immobilized carrier. The ability of a lipophilic carrier embedded in the lipid bilayer to reversibly bind the target solute and transport it through …

Fractionation And Characterization Of Lignin Streams From Genetically Engineered Switchgrass, Enshi Liu

Theses and Dissertations--Biosystems and Agricultural Engineering

Development of biomass feedstocks with desirable traits for cost-effective conversion is one of the main focus areas in biofuels research. As suggested by techno-economic analyses, the success of a lignocellulose-based biorefinery largely relies on the utilization of lignin to generate value-added products, i.e. fuels and chemicals. The fate of lignin and its structural/compositional changes during pretreatment have received increasing attention; however, the effect of genetic modification on the fractionation, depolymerization and catalytic upgrading of lignin from genetically engineered plants is not well understood. This study aims to fractionate and characterize the lignin streams from a wild-type and two genetically engineered …

Dynamic Model And Estimator Development For A Smart Refractory Brick With Embedded Wireless Sensors For Gasifier Applications, Qiao Huang

Graduate Theses, Dissertations, and Problem Reports

The operating temperature is one of the most important variables for gasifier operation. A higher temperature can shorten the service life of the refractory lining. A lower temperature can reduce the extent of carbon conversion and disrupt the flow of molten slag in a slagging gasifier. Therefore temperature is one of the most important variable in a gasifier. In slagging gasifiers, molten slag can penetrate into the refractory lining leading to refractory spallation, undesired downtime, and costly replacement. Even though the temperature and extent of slag penetration are extremely important for the gasifier operation, they cannot be measured reliably by …

Characterization Of Polyurethane For Use As Substrate In Nanofiber Sensor For Biomedical Applications, Megan Theaker

Williams Honors College, Honors Research Projects

The purpose of this project is to begin to determine properties of polymer nanocomposites that make a suitable substrate for nanofiber sensors. In this work, sensitivity of a sodium ion selective sensor constructed with polyurethane was used as a benchmark for comparison with sensors constructed with nylon-6. The sensors were characterized using contact angle and chronoamperometry. Using an ANOVA analysis, the results showed that the multi-walled carbon nanotube type was a significant factor on sensor response both with and without additional functionalization of the polymer by calixarene. The weight percentage of polyurethane in the electrospinning solution was also statistically significant …