Aerospace Engineering Commons^™

Effects Of Pressure Side Film Cooling Hole Placement And Condition On Surface Heat Transfer Characteristics Of A Transonic Turbine Blade Tip, Hallie Collopy, Phillip M. Ligrani, Hongzhou Xu, Michael Fox

PRC-Affiliated Research

The effects of film cooling hole placement location along the upper pressure side of a transonic squealer are considered. The thermal performance of four different film cooling configurations; B1, B2, B3 and B4, are considered using the University of Alabama in Huntsville's SS/TS/WT (supersonic/transonic/wind tunnel) experimental facility and a simulated turbine blade row using a linear cascade. Surface-varying results are provided for both the squealer blade tip surface, and for the upper pressure side of the squealer blade. These results are given for blowing ratios ranging from 0.42 to 3.20 in the form of spatially-resolved and spatially-averaged adiabatic film cooling …

Certification Basis For A Fully Autonomous Uncrewed Passenger Carrying Urban Air Mobility Aircraft, Steve Price

Student Works

The Urban Air Mobility campaign has set a goal to efficiently transport passengers and cargo in urban areas of operation with autonomous aircraft. This concept of operations will require aircraft to utilize technology that currently does not have clear regulatory requirements. This report contains a comprehensive analysis and creation of a certification basis for a fully autonomous uncrewed passenger carrying rotorcraft for use in Urban Air Mobility certified under Title 14 Code of Federal Regulations Part 27. Part 27 was first analyzed to determine the applicability of current regulations. The fully electric propulsion system and fully autonomous flight control system …

Metal Organic Framework Modifications Of Structural Fibers, Marwan Al-Haik

Publications

A reinforced carbon composite can include a carbon sub­strate and a metal organic framework bonded to the carbon substrate. For example, a reinforced carbon composite can include a first layer, a second layer, and a resin adhered to the first layer and the second layer. The first layer can include a carbon substrate and a metal organic framework bonded to the carbon substrate. The second layer can include a carbon substrate and a metal organic framework bonded to the carbon substrate.

S7e9: What New Frontiers Await For Maine’S Space Economy?, Ron Lisnet, Ali Abedi, Joseph Patton

The Maine Question

University of Maine research and education have ascended beyond Earth’s atmosphere since the 1990s. For example, UMaine scientists have tested the latest hypervelocity decelerators for NASA space travel and created a wireless leak detection system for the International Space Station. Through its latest inventions and studies, and scholarship and fellowship programs, UMaine plays a critical role in advancing the state’s space economy and training future leaders in the aerospace industry. But the university is far from reaching its final frontier.

In recent years, UMaine researchers have been developing the state’s first small research satellite with the University of Southern Maine …

Natural 2d Layered Mineral Cannizzarite With Anisotropic Optical Responses, Arindam Dasgupta, Xiaodong Yang, Jie Gao

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Cannizzarite is a naturally occurring mineral formed by van der Waals (vdW) stacking of alternating layers of PbS-like and Bi2S3-like two-dimensional (2D) materials. Although the PbS-type and Bi2S3-type 2D material layers are structurally isotropic individually, the forced commensuration between these two types of layers while forming the heterostructure of cannizzarite induces strong structural anisotropy. Here we demonstrate the mechanical exfoliation of natural cannizzarite mineral to obtain thin vdW heterostructures of PbS-type and Bi2S3-type atomic layers. The structural anisotropy induced anisotropic optical properties of thin cannizzarite flakes are explored through angle-resolved polarized Raman scattering, linear dichroism, and polarization-dependent anisotropic third-harmonic generation. …

Gen. Thomas P. Stafford Looks At The Display In The Hallway At Stafford Elementary, Weatherford Daily News

Articles

Gen. Thomas P. Stafford looks at the display in the hallway at Stafford Elementary, which is named in his honor. His two sons, Stas, right, and Michael look on.

Unless stated otherwise within this repository collection, all materials are shared under the following Creative Commons license: [Creative Commons Attribution-NonCommercial 4.0 International License].

Gen. Thomas P. Stafford Elementary School And Weatherford Stafford Airport Terminal Dedications November 21 & 22, 2022, Weatherford Daily News

Articles

A collection of photos from the dedications of Stafford Elementary and Stafford Airport Terminal, seen in the November 23rd, 2022 issue of the Weatherford Daily News.

Unless stated otherwise within this repository collection, all materials are shared under the following Creative Commons license: [Creative Commons Attribution-NonCommercial 4.0 International License].

Spacecraft Systems & Navigation, Christopher Vanacore

Student Works

This textbook is steered towards higher educational course entailed in Commercial Space Operations. This textbook will be covering in detail Orbital Satellites, and Spacecraft. These topics are discussed according to their application, design, and environment. The power system, shielding and communication systems are reviewed along with their missions, space, environment and limitations. Any vehicle, whether manned or unmanned, intended for space travel is a spacecraft. A spacecraft's required systems and equipment depend on the information it will acquire and the tasks it will perform. Although their levels of sophistication vary widely, they re all subject to the harsh conditions of …

Weatherford Stafford Airport Celebrates New Terminal, Weatherford Daily News

Articles

The City of Weatherford and Oklahoma Aeronautics Commission will host a special public celebration and ribbon cutting of the new Weatherford Stafford Airport Terminal.

Unless stated otherwise within this repository collection, all materials are shared under the following Creative Commons license: [Creative Commons Attribution-NonCommercial 4.0 International License].

Astronaut Snoopy’S 50-Plus Year History With Nasa, Weatherford Daily News

Articles

"Unknown to many, Snoopy has been working with NASA since the late 1950s"

Unless stated otherwise within this repository collection, all materials are shared under the following Creative Commons license: [Creative Commons Attribution-NonCommercial 4.0 International License].

New Schools Personal For Project Manager, Weatherford Daily News

Articles

Gen. Thomas P. Stafford Elementary started construction in 2020, having a hand in building Stafford Elementary and East Intermediate was personal for Project Manager Shawn Bonner.

Unless stated otherwise within this repository collection, all materials are shared under the following Creative Commons license: [Creative Commons Attribution-NonCommercial 4.0 International License].

Stafford Highlights - Famed Astronaut Returns For 40th Anniversary Of Apollo Mission, Weatherford Daily News

Articles

Above, Lt. Gen. Thomas P. Stafford speaks during the anniversary event in Weatherford December 7, 2012, of Apollo 17.

At top right, Michael, Thomas and Stas Stafford are pictured with Cosmonaut Valery Kubasov during the 40th Anniversary of Apollo 17 December 7, 2012.

Unless stated otherwise within this repository collection, all materials are shared under the following Creative Commons license: [Creative Commons Attribution-NonCommercial 4.0 International License].

A Machine Learning Approach Towards Analyzing Impact Of Surface Weather On Expect Departure Clearance Times In Aviation, Dothag Truong, Shlok Misra, Godfrey V. D'Souza

Publications

Commercial air travel in the United States has grown significantly in the past decade. While the reasons for air traffic delays can vary, the weather is the largest cause of flight cancellations and delays in the United States. Air Traffic Control centers utilize Traffic Management Initiatives such as Ground Stops and Expect Departure Clearance Times (EDCT) to manage traffic into and out of affected airports. Airline dispatchers and pilots monitor EDCTs to adjust flight blocks and flight schedules to reduce the impact on the airline’s operating network. The use of time-series data mining can be used to assess and quantify …

Local Astronaut May Command U.S.-Russian Flight (Reprint From 1972), Weatherford Daily News

Articles

EDITOR’S NOTE: this story first appeared in the November 2, 1972, edition of the Weatherford Daily News, 50 years ago today, about Lt. Gen. Thomas P. Stafford’s chance to commence a U.S.-Russian space flight.

Unless stated otherwise within this repository collection, all materials are shared under the following Creative Commons license: [Creative Commons Attribution-NonCommercial 4.0 International License].

Elastomer O-Ring Seal Swell Measurements For Sustainable Aviation Fuel Material Compatibility, Conor J. Faulhaber

Honors Theses

As efforts continue to fight climate change by transitioning energy sources away from fossil fuels and towards renewable alternative, the commercial aviation sector finds itself at danger of falling behind in emissions reductions. To combat this, the best term opportunity to reduce the industry’s contribution to greenhouse gas emissions has been identified as sustainable aviation fuel, or SAF, derived from renewable feedstocks like agricultural waste or used cooking oil. Currently, SAF is regulated to a 50%v blending limit with conventional petroleum-based fuel to maintain certain jet fuel properties, including material compatibility with elastomer o-ring seals. When these seals come in …

Ramping Up For Cost And Performance Improvements, Arthur Zucchetti Lechmann, Guilherme Henrique Lima, João Paulo Lucchi, Paulo Henrique Azevedo Santana, Pedro Kamikihara

Student Works

The objective of this Research Project was to study the possible benefits of developing an improved Metering Control System. This study identified potential cost savings and reduced emissions through the greater use of a Metering Control System. The results of this research have indicated an annual cost reduction of $720,000 in fuel burn and a significant delay time reduction caused by accumulated ground traffic. In addition, during peak hours, it was concluded that savings could be potentially higher. Therefore, by optimizing the ground movement, it is also expected a lower level of CO2 emissions, an increased safety level due to …

Study Into The Sensitity Of The G-H Method To Blending Distance, Cory Goates, Doug Hunsaker

Browse all Datasets

A numerical lifting-line method (implemented in an open-source software package) is presented which can accurately estimate the aerodynamics of wings with arbitrary sweep, dihedral, and twist. Previous numerical lifting-line methods have suffered from grid convergence challenges and limitations in accurately modeling the effects of sweep, or have relied on empirical relations for swept-wing parameters and have been limited in their application to typical wing geometries. This work presents novel improvements in accuracy, flexibility, and speed for complex geometries over previous methods. In the current work, thin-airfoil theory is used to correct section lift coefficients for sweep, providing a more general …

Multiple Discharges Before Leader Inception In Long Air Gaps Under Positive Switching Impulses, Xiangen Zhao, Juhyeong Lee, Gang Liu, Lei Jia, Yang Liu, Junjia He, Yaping Du

Mechanical and Aerospace Engineering Faculty Publications

There are multiple corona bursts before leader inception when the rising rate of the applied voltage or electric field is not sufficiently high enough in long positive sparks. In existing studies, no attention has been paid to whether these corona bursts occur in the same location, and they are mostly considered directly as belonging to the same discharge. However, this paper presents that in a typical rod-plate long air gap, the multiple corona bursts before leader inception are distributed in at least two different locations, and the highest probability of three discharges occurs. Also, the discharge occurs with the highest …

Seal For A Wave Rotor Disk Engine, Christopher Tait, Pejman Akbari, Brian Sell, Marc Polanka

AFIT Patents

A unique seal for a wave rotor disk engine is disclosed herein. The seal is operable for sealing a region between a rotor and a rotor casing. The seal is spring loaded and will engage with the tip of the rotor to reduce pressure loss within the wave rotor disk engine.

A Comparative Performance Analysis Of The Novel Turboaux Engine With A Turbojet Engine, And A Low-Bypass Ratio Turbofan Engine With An Afterburner, Kaleab Fetahi, Sharanabasaweshwara A. Asundi, Arthur C. Taylor

Mechanical & Aerospace Engineering Faculty Publications

Presented herein is a comparative performance analysis of a novel turbofan engine with an auxiliary combustion chamber, nicknamed the TurboAux engine, against a turbojet engine, and a low bypass ratio turbofan engine with an afterburner is presented. The TurboAux engine is an adaption of the low-bypass ratio turbofan engine, but with secondary combustion in an auxiliary bypass annular combustion chamber for thrust augmentation. The TurboAux engine is envisioned with the desire to facilitate clean secondary burning of fuel at temperatures higher than in the main combustion chamber with air exiting the low-pressure compressor. The comparative study starts by analyzing the …

Machine Learning In Aerodynamic Shape Optimization, Jichao Li, Xiaosong Du, Joaquim R.R.A. Martins

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Machine learning (ML) has been increasingly used to aid aerodynamic shape optimization (ASO), thanks to the availability of aerodynamic data and continued developments in deep learning. We review the applications of ML in ASO to date and provide a perspective on the state-of-the-art and future directions. We first introduce conventional ASO and current challenges. Next, we introduce ML fundamentals and detail ML algorithms that have been successful in ASO. Then, we review ML applications to ASO addressing three aspects: compact geometric design space, fast aerodynamic analysis, and efficient optimization architecture. In addition to providing a comprehensive summary of the research, …

Additive Manufacturing Of Complexly Shaped Sic With High Density Via Extrusion-Based Technique – Effects Of Slurry Thixotropic Behavior And 3d Printing Parameters, Ruoyu Chen, Adam Bratten, Joshua Rittenhouse, Tian Huang, Wenbao Jia, Ming-Chuan Leu, Haiming Wen

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Additive manufacturing of dense SiC parts was achieved via an extrusion-based process followed by electrical-field assisted pressure-less sintering. The aim of this research was to study the effect of the rheological behavior of SiC slurry on the printing process and quality, as well as the influence of 3D printing parameters on the dimensions of the extruded filament, which are directly related to the printing precision and quality. Different solid contents and dispersant- Darvan 821A concentrations were studied to optimize the viscosity, thixotropy and sedimentation rate of the slurry. The optimal slurry was composed of 77.5 wt% SiC, Y2O3 and Al2O3 …

Predicting Defects In Laser Powder Bed Fusion Using In-Situ Thermal Imaging Data And Machine Learning, Sina Malakpour Estalaki, Cody S. Lough, Robert G. Landers, Edward C. Kinzel, Tengfei Luo

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Variation in the local thermal history during the Laser Powder Bed Fusion (LPBF) process in Additive Manufacturing (AM) can cause micropore defects, which add to the uncertainty of the mechanical properties (e.g., fatigue life, tensile strength) of the built materials. In-situ sensing has been proposed for monitoring the AM process to minimize defects, but successful minimization requires establishing a quantitative relationship between the sensing data and the porosity, which is particularly challenging with a large number of variables (e.g., laser speed, power, scan path, powder property). Physics-based modeling can simulate such an in-situ sensing-porosity relationship, but it is computationally costly. …

Aircraft Engine Particulate Matter Emissions From Sustainable Aviation Fuels: Results From Ground-Based Measurements During The Nasa/Dlr Campaign Eclif2/Nd-Max, Tobias Schripp, Bruce E. Anderson, Uwe Bauder, Bastian Rauch, Joel C. Corbin, Greg J. Smallwood, Prem Lobo, Ewan C. Crosbie, Michael A. Shook, Richard C. Miake-Lye, Zhenhong Yu, Andrew Freedman, Philip D. Whitefield, Claire E. Robinson

Chemistry Faculty Research & Creative Works

The use of alternative jet fuels by commercial aviation has increased substantially in recent years. Beside the reduction of carbon dioxide emission, the use of sustainable aviation fuels (SAF) may have a positive impact on the reduction of particulate emissions. This study summarizes the results from a ground-based measurement activity conducted in January 2018 as part of the ECLIF2/ND-MAX campaign in Ramstein, Germany. Two fossil reference kerosenes and three different blends with the renewable fuel component HEFA-SPK (Hydroprocessed Esters and Fatty Acids Synthetic Paraffinic Kerosene) were burned in an A320 with V2527-A5 engines to investigate the effect of fuel naphthalene/aromatic …

Enabling Ultrathick Electrodes Via A Microcasting Process For High Energy And Power Density Lithium-Ion Batteries, Tazdik Patwary Plateau, Hiep Pham, Yaqi Zhu, Ming-Chuan Leu, Jonghyun Park

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Thickening electrodes is one effective approach to increase active material content for higher energy and low-cost lithium-ion batteries, but limits in charge transport and huge mechanical stress generation result in poor performance and eventual cell failure. This paper reports a new electrode fabrication process, referred to as µ-casting, enabling ultrathick electrodes that address the trade-off between specific capacity and areal/volumetric capacity. The proposed µ-casting is based on a patterned blade, enabling facile fabrication of 3D electrode structures. The study reveals the governing properties of µ-casted ultrathick electrodes and how this simultaneously improves battery energy/power performance. The process facilitates a short …

Sme Coffee Hour: Human Factors: Dirty Dozennorms And Complacency, Linda Vee Weiland

Publications

Presentation about the relevance between communication, language, complacency and norms related to flight safety.

Feasibility Of Low-Enriched Uranium Fueled Nuclear Thermal Propulsion In The Low-Thrust Region Below 16klbf, Samantha B. Rawlins, Dale L. Thomas

PRC-Affiliated Research

No abstract provided.

Turbine Cooling System With Energy Separation, James L. Rutledge, Matthew Fuqua, Carol M. Bryant

AFIT Patents

A method and system for cooling an engine and/or vehicle using energy separation is disclosed herein. An energy separation device is operable for separating a compressed gaseous coolant stream into a first relatively cooler coolant flow stream and a second relatively hotter coolant flow stream. The relative cooler coolant flow stream is directed to a first region requiring increased cooling and the relative hotter coolant flow stream is directed to a second region requiring lower cooling than the first region in the engine or vehicle.

Design Of Composite Double-Slab Radar Absorbing Structures Using Forward, Inverse, And Tandem Neural Networks, Devin Nielsen, Juhyeong Lee, Young-Woo Nam

Mechanical and Aerospace Engineering Faculty Publications

The survivability and mission of a military aircraft is often designed with minimum radar cross section (RCS) to ensure its long-term operation and maintainability. To reduce aircraft’s RCS, a specially formulated Radar Absorbing Structures (RAS) is primarily applied to its external skins. A Ni-coated glass/epoxy composite is a recent RAS material system designed for decreasing the RCS for the X-band (8.2 – 12.4 GHz), while maintaining efficient and reliable structural performance to function as the skin of an aircraft. Experimentally measured and computationally predicted radar responses (i.e., return loss responses in specific frequency ranges) of multi-layered RASs are expensive and …

Hyper-Velocity Impact Performance Of Foldcore Sandwich Composites, Nathan Hoch, Chase Mortensen, Juhyeong Lee, Khari Harrison, Kalyan Raj Kota, Thomas Lacy

Mechanical and Aerospace Engineering Faculty Publications

A foldcore is a novel core made from a flat sheet of any material folded into a desired pattern. A foldcore sandwich composite (FSC) provides highly tailorable structural performance over conventional sandwich composites made with honeycomb or synthetic polymer foam cores. Foldcore design can be optimized to accommodate complex shapes and unit cell geometries suitable for protective shielding structures

This work aims to characterize hypervelocity impact (> 2000 m/s, HVI) response and corresponding damage morphologies of carbon fiber reinforced polymer (CFRP) FSCs. A series of normal (0° impact angle) and oblique (45° impact angle) HVI (~3km/s nominal projectile velocity) impact …