Aerospace Engineering Commons^™

Husker Motorsports Active Drag Reduction System, Creighton Hughes, Evan Killian, Micah Busboom, Aj Johnson, Jude Steffen

Honors Theses

Formula SAE is a multifaceted competition that involves student teams designing and competing with an open-wheel style race car. There are 5 different dynamic events included in the competition. Each event requires a unique aerodynamic setup to have the best performance possible. This design project focuses on a drag reduction system (DRS) that will improve aerodynamic performance, resulting in faster lap times and increased competitiveness. Key features include a direct electronic actuation mechanism that will allow the rear wing to be adjusted during a race. The benefits of the DRS system, include increased speed, improved handling, and greater fuel efficiency …

The Effects Of Differing Light Wavelengths And Gravity On, Reese Chesshir

Honors Theses

Physarum is a slime mold in the class of Mycetozoan and the family of Physaraceae. It is a single cellular, multinuclear organism that is not classified as an animal, plant, or fungi. Physarum growth for long-term space travel would be beneficial because it is a decomposer and is able to break down material and waste to recycle. This is important for transferring energy and allowing other organisms to grow. The purpose of this experiment is to study the effect of different light wavelengths and the influence of gravity on Physarum growth patterns.

Innovation For The Air: A Brief History Of Worldwide Aviation, Lauren Plumley

Honors Theses

The purpose of this report is to present a brief but comprehensive overview of the variety of innovations related to aviation, and to discuss their impact on scientific progress over the course of human history. Relevant discoveries from the fields of physics and aerodynamics, and the numerous technologies built based upon these discoveries, are discussed over a period ranging from ancient times to the twenty-first century. The scope of this report is an overview of the development of powered and unpowered aircraft, including lighter-than-air, heavier-than-air, and aerospace technologies. Aviation developments were generally not limited to one specific country or person, …

Analysis And Mitigation Of Pneumatic Regulator Resonance, Luke Fouch

Honors Theses

Internal resonance in pneumatic regulators can result in heavy leakage, which can lead to less efficient processes. To address this issue, two simulations were developed to simulate pneumatic regulation systems. The first simulation involved deriving a mathematical model of the equations of motion for a regulator and applying it using MATLAB. The second simulation involved developing a Simulink model that incorporated physical regulator properties. To verify the accuracy of both models, physical testing data was used. After verification, the models were modified in various ways to determine the main drivers of resonance in pneumatic systems. Additionally, Finite Element Analysis was …

Thermal Control For A Miniaturized Fabry-Perot Interferometer In A Cubesat, Callie Pilkington

Honors Theses

The evaluation of neutral winds is critical in understanding the ever-changing weather and climate of the thermosphere, which can develop into a hostile environment for satellites. To measure these neutral winds, Michigan Aerospace Corporation is developing a 6U CubeSat that utilizes a miniaturized Fabry-Perot interferometer. For ideal operation, the Fabry-Perot interferometer requires a closely maintained thermal environment. These requirements are crucial in obtaining accurate measurements and for sustaining instrument and mission life due to the vast temperature range experienced in the thermosphere. With the solutions outlined in this proposal, the goal is to provide Michigan Aerospace with an optimized configuration …

Design Of A Dynamometer Test Platform For Formula Sae Internal Combustion And Electric Powertrains, Ryan Bare

Honors Theses

This dynamometer project was completed for the Formula SAE team at Western Michigan University and aimed to deliver a functional and safe engine dynamometer test stand. Formula SAE is a student organization that designs and manufactures a new formula style race car from the ground up every year to compete at an international collegiate competition. The purpose of the dynamometer is to allow the team to tune their internal combustion (IC) engine and the newly developed electric powertrain (EV). The engine dynamometer is important to the Formula team as it will allow engine tuning and diagnosis prior to the completion …

High Power Rocket Motor Test Bench, Jonathan Wine

Honors Theses

Static ground testing of rocket motors is used to gather performance data and troubleshoot the propulsion system, allowing propulsion engineers to compare actual characteristics to the designed parameters. It is also used in the development and validation of new propulsion systems and alterations to the fuel and oxidizer mixtures. Test benches are used to continuously collect data throughout the burn of a rocket motor, which allows engineers to plot the thrust as a function of time. This plot, a thrust curve, displays several important pieces of information about a rocket motor. This information is crucial to allow astronautical engineers to …

The Effects Of Light Intensity And Cell Structure On The Cultivation Of Arthrospira Platensis, Taylor Barnhart

Honors Theses

As scientists explore further into space, more cost-effective resources are needed for long-term space travel. An interesting solution is Arthrospira platensis, a filamentous cyanobacteria high in proteins and nutrients, and known for its helical structure. In unfavorable conditions, coiled spirulina cells become straight. Spirulina converts carbon dioxide gas into pure oxygen and the different cell structures stimulate different responses in oxygen production and cultivation. In these experiments, 2.3 L containers of pure coiled spirulina and mixed (coiled and straight) spirulina were placed into 3 incubators with different light intensities: 51µmol/m2/s, 25µmol/m2/s, 12µmol/m2/s. Each experiment length was 72 hours and the …

Elastomer O-Ring Seal Swell Measurements For Sustainable Aviation Fuel Material Compatibility, Conor J. Faulhaber

Honors Theses

As efforts continue to fight climate change by transitioning energy sources away from fossil fuels and towards renewable alternative, the commercial aviation sector finds itself at danger of falling behind in emissions reductions. To combat this, the best term opportunity to reduce the industry’s contribution to greenhouse gas emissions has been identified as sustainable aviation fuel, or SAF, derived from renewable feedstocks like agricultural waste or used cooking oil. Currently, SAF is regulated to a 50%v blending limit with conventional petroleum-based fuel to maintain certain jet fuel properties, including material compatibility with elastomer o-ring seals. When these seals come in …

Application Of The Formal Design Of Experiments To Deformed Airfoil Testing, Alex Ligman

Honors Theses

Traditionally, one factor at a time (OFAT) testing is used to accomplish wind tunnel
experimentation. OFAT testing is a process whereby one of the defined factors in the experiment is changed while all of the other factors are held constant. Afterwards, a new factor is chosen as the one to be manipulated, and the process is then repeated until all factors have been run through. Due to the possible cost-intensive and time-consuming nature of wind tunnel testing, formal design of experiments (DOE) has begun to be applied to wind tunnel experiments. In doing so, unique analyses can be made that …

Design, Optimization, And Construction Of Flexure, Optical, Damping, And Leveling Systems For Electric Propulsion Thrust Stand, Logan Hefferan

Honors Theses

An Thrust Stand is a device that uses the basic principles of torsion and displace­ment to experimentally measure and calculate the thrust generated by an Electric Propulsion (EP) Thruster. Western Michigan University is host to three organiza­tions that work with electric propulsion thrusters currently without a way of ob­taining direct experimental thrust data. For this Senior Design Project, the flexure, optical sensing, damping and leveling systems for a thrust stand originally designed by Hannah Watts in her WMU Honors Thesis: Design of A Thrust Stand for Elec­tric Propulsion [13] will be constructed. The four subsystems will be redesigned, optimized, and …

The Effect Of Store-To-Store Energy Transfers On The Global Dynamics Of Aircraft, Guilherme Mainieri Eymael

Honors Theses

This study analyzes the energy transfer mechanisms when nonlinear devices (stores) are attached to a linear model airplane. For that, a reduced-order model (ROM) was derived to simulate the first two flexible modes of vibration of the primary structure (aircraft) with one store in each wing. Each store can either be locked or unlocked. When locked, it only contributes as mass-effect, and when unlocked, it adds nonlinearity to the system. Simulations were then performed with either both stores locked, one store unlocked, or both stores unlocked. It was found that the attachment of nonlinear stores in the ROM changes the …

Analysis On Fuel Options For Scramjet Engines With The Study To Lower The Starting Mach Number, Sumantra Luitel, Gagan Dangi

Honors Theses

The main objectives of this report were to perform analysis of an ideal scramjet engine, to assess the influence of fuel on endurance factor, and the possibility of lowering the starting Mach Number of the scramjet. In the first part, an ideal cycle parametric analysis was conducted on three different fuels i.e. Liquid Hydrogen (LH2), Jet Propellant 7 (JP-7), and Rocket Propellant (RP-1), taking into account their availability, physical properties, current uses, and potential uses. The detailed analysis is done largely relying on a 9 step Parametric Cycle Analysis technique to study how fuel properties influence the variation of seven …

Optimum Double Rhombic Flap Design For Z-Plasty, Abdullah Khan

Honors Theses

In the medical field, especially in plastic surgery, Rhombic flap and z-plasty are common methods in surgical procedures to treat and close complex wounds of different types of injuries/surgery. Each conventional surgical method has its own pros and cons. When both conventional methods join, it would complement each other weaknesses. This senior design project purpose is to investigate the magnitude of stresses build on skin due to transposing of skin in these methods when the wound is close after the surgical procedure is done. In this project a combination of rhombic flap and z-plasty is studied which is Double Rhombic …

Charge Tracing For Determining Electrical Facility Effects On Electric Spacecraft Propulsion Systems., Tyler Bye

Honors Theses

Electric Propulsion Systems are the future of deep space travel. Since its design in 2016 Western Michigan University has been testing a Hall-Thruster from a previous Senior Design Group. One issue with Electric Propulsion Systems is tracing where the electrons go after being used to ionize propellant for spacecraft acceleration. Induced magnetic fields on Earth alter the electron paths found in the vacuum of space.

One solution is the EP TEMPEST. The EP TEMPEST is an electron tracer designed by the Air Force Research Laboratory. The goal of this project is to design an electron tracer like the EP TEMPEST …

Long Duration Venus Lander, Aidan Wales

Honors Theses

Venus continues to be a target of interest for the scientific community, as the similarities and differences to Earth pose intriguing questions about planetary evolution. The National Aeronautics and Space Administration (NASA) is looking to gain a better understanding of Earth’s sister planet and has presented a challenge to interested undergraduate student teams to develop a in-situ robotic explorer and accompanying relay. The student team representing Western Michigan University has designed a long-term Venusian lander to both survive the harsh environment for an extended period and gather scientific data on the planet’s atmosphere and surface to be communicated back to …

Long-Term Venus Lander, Scott Miller

Honors Theses

Venus continues to be a target of interest for the scientific community, as the similarities and differences to Earth pose intriguing questions about planetary evolution. The National Aeronautics and Space Administration (NASA) is looking to gain a better understanding of Earth’s sister planet and has presented a challenge to interested undergraduate student teams to develop a in-situ robotic explorer and accompanying relay. The student team representing Western Michigan University has designed a long-term Venusian lander to both survive the harsh environment for an extended period and gather scientific data on the planet’s atmosphere and surface to be communicated back to …

Design Of A Full-Scale Plant For Plastic Pyrolysis, Hannah Sargent

Honors Theses

With over thirty million tons of plastic accumulating in the United States every year, the need for an environmentally safe means of disposal is increasing. Only ten percent of this plastic is recycled while the majority is disposed of via landfill. With recent advances in pyrolysis research, a permanent solution is presented. By creating a pyrolysis plant, not only could billions of pounds of plastic be prevented from contributing to landfills, but also be converted to oil resulting in an environmentally beneficial and lucrative solution to plastic waste.

Long-Duration Venus Explorer, Ethan Reid

Honors Theses

Venus continues to be a target of interest for the scientific community, as the similarities and differences to Earth pose intriguing questions about planetary evolution. The National Aeronautics and Space Administration (NASA) is looking to gain a better understanding of Earth’s sister planet and has presented a challenge to interested undergraduate student teams to develop a in-situ robotic explorer and accompanying relay. The student team representing Western Michigan University has designed a long-term Venusian lander to both survive the harsh environment for an extended period and gather scientific data on the planet’s atmosphere and surface to be communicated back to …

Derivation And Exploration Of Analytical Aircraft Stability Analysis, Roderick Landreth

Honors Theses

A comprehensive measure of the in-flight stability of an aircraft is essential, though it can take a large amount of resources to do accurately and usefully. Small companies and colleges often don't have the resources to attain accurate experimental or analytical data to describe stable flight before potential failure. This composition investigates methods of completing a static and dynamic stability analysis for an aircraft feasible for a college, small business or hobbyist to complete, with the goal to eliminate the 'barrier of entry' concerning a lack of information and resources. A sample analytical calculation for static stability of Union College's …

Delaying Flow Separation Using Piezoelectric Actuators, Kenechukwu Okoye

Honors Theses

Flow separation causes aircraft to experience an increase in drag degrading their aviation performance. The goal of the study was to delay flow separation on an airfoil by embedding a high-frequency translational piezoelectric actuator along the surface of the airfoil. This study investigated the extent to which the high-frequency translational piezoelectric actuator displaces the flow separation downstream or prevents it altogether utilizing a fog-based flow visualization experiment. The actuators with two actuation surfaces were embedded on the suction surface of an Eppler 862 airfoil model and placed in a low-speed wind tunnel. Dry ice fog streams were injected into the …

Augmented Reality In A Dynamic Drone Based Environment, Christopher Davis

Honors Theses

Augmented Reality (AR) and Unmanned Ariel Vehicles (UAVs) are fast advancing technologies, and this research seeks to combine them to offer an effective, user friendly approach for monitoring infrastructure. Drones provide a means to easily access otherwise difficult to reach locations and visualize useful information with Augmented Reality. A UAV employs a wide-angle view and, when paired with AR, this will enable the user to better complete their task by effortlessly providing the critical information they need in the most intuitive way possible. This research is particularly applicable for civil applications such as construction and monitoring of difficult to access …

Helios And Tenasi Results For The Workshop For Integrated Propeller Prediction, Aaron Crawford

Honors Theses

Beginning in 2018, the AIAA began the workshop for integrated propeller prediction. This effort was intended to bolster the CFD prediction capabilities of the aerospace community due to a resurgent interest in propeller driven vehicles for electric applications. The test bed for this workshop is the NASA X-57, a model of which was experimentally tested in the Lockheed Martin Low Speed Wind Tunnel in January 2019. Using the 3D scanned geometry provided by the workshop a mesh was created and all priority one simulations were performed using two flow solvers. The flow solvers used were Helios, developed by the ADD …

Aerodynamics Of Wind Loading On Buildings, Kayla Burch

Honors Theses

A three-dimensional model of a one-story residential home, with an emphasis on the roof style and structure, was modeled using CATIA and then built and tested in the wind tunnel at Western Michigan University. The wind tunnel allowed an airflow over different style roofs to be tested at 100 mile per hour winds, strengths typical for hurricanes and other natural phenomena. The measured results show the lift and drag, along with the pressure gradient and the skin friction over the roofs. The effect of these aerodynamic characteristics of the building due to adding solar panel prototypes were also evaluated. The …

Methodology Of Topology Optimization, Naziha Khandoker

Honors Theses

The need for lighter products is becoming increasingly essential as it cuts material cost and significant amount of weight, which is a key factor in the automotive and aerospace industries. Topology optimization allows us to achieve that by applying the concept to different structures with the goal of optimal distribution of material within finite volume design domain. Its algorithms selectively remove and relocate elements to achieve the optimum performance. This project performs a study on the effect of each design parameter over mechanical performance using Finite Element Analysis and applies it to set of wing attachment brackets. The optimized brackets …

Structural Health Monitoring Of Composite Parts: A Review, Jacob Pessin

Honors Theses

Structural health monitoring has the potential to allow composite structures to be more reliable and safer, then by using more traditional damage assessment techniques. Structural health monitoring (SHM) utilizes individual sensor units that are placed throughout the load bearing sections of a structure and gather data that is used for stress analysis and damage detection. Statistical time based algorithms are used to analyze collected data and determine both damage size and probable location from within the structure. While traditional calculations and life span analysis can be done for structures made of isotropic materials such as steel or other metals, composites …

Thermal Adaptation Of A Vacuum Chamber, Jacob Russell

Honors Theses

The process of adapting a preexisting vacuum chamber to perform thermal vacuum testing is a rare process in the testing industry. A closed vacuum system that was designed without thermal capacitance in mind will hinder the development of additional thermal system capabilities and prove difficult from a cost standpoint. Generally, building a thermal vacuum system from scratch will cost on the order of $10,000 to $100,000 depending on the system requirements regarding control and thermal capacitance within the chamber. This project will explore the cost of such an adaptation, attempting to minimize expense, and potentially provide the “Western Aerospace Launch …

Design Of A Thrust Stand For Electric Propulsion, Hannah Watts

Honors Theses

Thrust stands are the industry standard device for measuring the low levels of thrust generated by electric propulsion devices. Western Michigan University’s Aerospace Laboratory for Plasma Experiments is home to several electric propulsion devices and is in the process of obtaining a pulsed plasma thruster in partnership with the Western Aerospace Launch Initiative. The lab currently has no way of measuring the true thrust force generated by these devices. A thrust stand has been designed specific to the micro-Newton thrust range and the constraints inherent to the facilities in which it will operate.

Energy Analysis And Orbit Simulation Of Actuating Cubesat Solar Arrays, Justin T. Ehren

Honors Theses

CubeSats are used in space research to explore new technologies and detect data to gain a better understanding of various areas of research and subjects affecting human life. CubeSats rely on a solar array to generate energy from the sun and perform their various functions in space. This research studies the energy capturing potential of various solar array configurations and positioning devices for CubeSats. The location and orientation of a CubeSat is simulated with MATLAB for both geo-synchronous and sunsynchronous orbits. Two degree-of-freedom (DoF) positioning devices are sufficient to continuously adjust the photovoltaic array to face towards the sun. Lower …

Rotating Mount For Complex Fluid Flow Research, Kirsten Murphy

Honors Theses

Fluid flow around rotating objects is mathematically complex and there is currently limited experimental data on the subject. To make Western Michigan University capable of this research, a rotating wind tunnel mount was developed. The mount design was integrated into the existing setup at the Applied Aerodynamics Laboratory (AAL) to allow seamless transitions between different research projects. Non-rotating and rotating disk prototypes were created from 3D-printed materials to test the mount’s capabilities. Experimental data gathered from utilizing this rotating mount was analyzed to understand the aerodynamic effects on rotating disks in a fluid stream. From testing the rotating disk prototype …