Engineering Commons^™

Development Of Battery Materials To Function As Corrosion Protection On Car Body Plates, Tubagus Noor Rohmannudin, Sulistijono Sulistijono, Noval Adrinanda, Faridz Wira Dharma, Samuel Areliano

Journal of Materials Exploration and Findings

Most car bodies made for mass production are made from steel or aluminum. Both are strong metals, but steel is cheaper than aluminum and is more commonly used in lower-end cars for a broader consumer range. The weakness of steel compared to aluminum is that it is susceptible to corrosion under certain conditions, and thus it may deteriorate over time without proper care. To prevent corrosion, modern cars are coated with paint to prevent direct contact with the environment. As a second line of protection, a car battery can be connected to the body to create an impressed current cathodic …

Determination Of Electromagnetic Properties Of Steel For Prediction Of Stray Losses In Power Transformers, Leonardo Strac, Damir Zarko

Turkish Journal of Electrical Engineering and Computer Sciences

This paper introduces a method for determination of equivalent linear electromagnetic parameters (constant complex permeability and electrical conductivity) of nonlinear magnetic steel, which can be used in a time-harmonic finite-element simulation to yield the same losses in the volume of that material as the measured ones. The conductivity and the static hysteresis loop of the steel have been measured, from which complex permeability as a function of flux density has been extracted. The indirect measurement of losses in various samples of nonmagnetic and magnetic steel has been carried out using a physical model of a transformer core with a coil. …

Spannungsfeld, Julian Voss-Andreae

The STEAM Journal

My design for a sculptural installation for the University of Minnesota’s new Physics and Nanotechnology Building is inspired by a view of the human body through the lens of quantum physics.

The German title of the installation (literally "tension field") originated in physics but is used in contemporary German almost exclusively in a metaphorical sense, implying a dynamic tension, often between polar opposites, that permeates everything in its vicinity.

Electrochemical Deposition Of Porous Vox And Mno2 Nanowires On Stainless Steel Mesh For Flexible Supercapacitors, Shulei Chou, Jiazhao Wang, Hua Liu, S Dou

Shulei Chou

Porous vanadium oxide (VO_x) and MnO₂ nanowires were synthesized by an electrochemical deposition method using stainless steel mesh as substrate. The as-prepared porous VO_x and MnO₂ nanowire films were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and Raman spectroscopy. The cyclic voltammetry (CV) results show that the MnO₂ nanowire film shows specific capacitance of 195, 170, 158, and 91 F g^-1 at scan rates of 5, 10, 20, and 50 mV s^-1, respectively. The porous VO_x film displays specific capacitance of 152, 124, 99, and 76 F g …

Encapsulation Of High Temperature Phase Change Materials For Thermal Energy Storage, Rupa Nath

USF Tampa Graduate Theses and Dissertations

Thermal energy storage is a major contributor to bridge the gap between energy demand (consumption) and energy production (supply) by concentrating solar power. The utilization of high latent heat storage capability of phase change materials is one of the keys to an efficient way to store thermal energy. However, some of the limitations of the existing technology are the high volumetric expansion and low thermal conductivity of phase change materials (PCMs), low energy density, low operation temperatures and high cost. The present work deals with encapsulated PCM system, which operates at temperatures above 500°C and takes advantage of the heat …

Electrochemical Detection For The Corrosion Of Reinforcing Steel In Concrete During Immersion And Drying Cycles, Bing-Li Jia, Fa-He Cao, An-Na Chen, Jian-Qing Zhang

Journal of Electrochemistry

The corrosion behavior of reinforcing steel in concrete under dry-wet cycle condition has been studied by electrochemical noise(EN) compared with the electrochemical impedance spectroscopy(EIS),SEM micrographs and EDS.The statistical method has been employed to analyze the EN data of reinforcing steel in concrete,which revealed three different corrosion stages of reinforcing steel in concrete,including the dissolution of the passive film,the active corrosion and the cumulation of corrosion product.The wavelet transform has also been employed,which indicated that steel in concrete with pH 1 is associated with uniform corrosion,while steel in concrete with pH 3 and pH 7 are associated with localized corrosion,such as …

Hook Crack In Electric Resistance Welding Line Pipe Steel, Sima Aminorroaya-Yamini, Hossein Edris, Mehrdad Fatahi

Australian Institute for Innovative Materials - Papers

One of the production methods for API line pipe steel is electric resistance welding (ERW). This kind of pipes is encountered with hook crack which is one of the defects that is observed in the upset zone of ERW pipes, detecting by ultrasonic inspection. Hook crack is a small crack following the weld flow lines and if severe enough, opened up at the pipe surface. These defects were commonly associated with sulphide stringers and non metallic oxide inclusions.

In this research, welds containing hook cracks were obtained from Ahvaz pipe making factory. Scanning electron microscope (SEM) examination showed that all …

Corrosion Of Steel In Sea-Bottom Mud Of Nothern China Sea Area, Gong-Yu Guo, Jing-Lei Zhang, Bao-Rong Hou, Fang-Ying Yang

Journal of Electrochemistry

Corrosion experiments of A 3, 16Mn, 20 # as well as ZCE36_225 steel were carried out in southern Bohai sea and Qingdao sea areas. The sea_bottom mud in southern Bohai sea area is the sandy mud and that in Qingdao sea area is pure beach sand. In this experiment, the compareing test of two modes with electric connected and non_electric connected modes was carried out. The experiment results showed that: 1) the corrosion rate of steel in sea_bottom mud has a strong relation with mud types. The corrosion rates of steels in pure beach sand are much higher than those …

Characterization Of Iron Oxides And Atmospheric Corrosion Of Steel, Sei Jin Oh

Physics Theses & Dissertations

The study of corrosion behavior was performed using three different analytical techniques, which provided information on the formation, development and layering of iron oxides on the corrosion products as a function of atmospheric conditions, exposure time and type of steel. In particular, the protective layer formed on weathering steel was investigated as a function of different amounts of alloying elements in the steel, atmospheric conditions and exposure times. Combined together, the results provided a better understanding of the atmospheric corrosion behavior of steel, and formed a part of database of the atmospheric corrosion characteristics.

Accurate characterization of the iron oxides …

Investigation Of Inclusions In Armco Ingot Iron, Edwin J. Duncan

Bachelors Theses and Reports, 1928 - 1970

Various chemical and electrolytic separation methods were investigated in an attempt to separate the in­clusions in Armco ingot iron. Residues obtained were X-rayed for identification purposes. The microstruc­tures of this iron were studied with the object of de­termining the relative sizes, locations, and possible compositions of the inclusions.

Studies Of Tempering Behavior Of Steel X-9165 Of N-A-X 9100 Series, James A. Ndulue

Bachelors Theses and Reports, 1928 - 1970

One of the reasons why steel is the most versatile of all the metals available for engineering applications is because of the wide range of properties that can be obtained from it by proper heat treatment.

Electroplating Of Chromium, Nickel And Copper Upon Titanium, Stanley O. Fong

Bachelors Theses and Reports, 1928 - 1970

Recently, there has been a great amount of research work done on the metal titanium. Since it is a light weight metal, with unusual strength and good resistance to corrosion, it may be a possible substitute for aluminum and magnesium alloys, or steel.

The Influence Of Copper Upon The Age Hardening Properties Of Steel, Andre Rey

Bachelors Theses and Reports, 1928 - 1970

The virtues of alloy steels have been widely publi­cized in both technical literature and everyday adver­tising. Nearly everyone possessing a slight knowledge of metallurgy knows the beneficial effects of chromium in the manufacture of stainless steels, or the importance of nickel, molybdenum, vanadium, and other common elements used to alloy steels.

Benefication Of A Tungsten Ore, James Alexander Shaffer Jr.

Bachelors Theses and Reports, 1928 - 1970

Tungsten is a metal of high strategic value in the defense effort. It is used chiefly to improve creep strength in steels, although a significant percentage enters into the manufacture of cemented carbide tool bits. Therefore, in this age of mechanized warfare, quality and quantity of defense production depend greatly on tungsten.

The Electrolytic Polishing Of Steel In Solutions Of Sulphuric And Phosphoric Acids, Joseph W. Tripp

Bachelors Theses and Reports, 1928 - 1970

The process of cleaning and pickling the surfaces of steel objects by electrolytic methods has been known and applied since about 1920; the fact that under certain con­ditions these surfaces acquired a brilliant luster was noted as early as 1928.

An Isothermal Study Of An S.A.E. 6150 Steel, Tom Liss, C. Arentzen

Bachelors Theses and Reports, 1928 - 1970

The purpose of this thesis is to set forth the method followed, the laboratory procedure practiced, the results obtained, the conclu­sions drawn, and the recommendations proposed as a consequence of a metallographic study of the isothermal transformation of an S.A.E. 6150 steel.

An Investigation Of Silicon Impregnation Of Low-Carbon Steels, Thomas E. Groce

Bachelors Theses and Reports, 1928 - 1970

A problem of metallurgy during the last part of the Nineteenth and the early Twentieth Century, and one that stood very near the front, was investigations of methods to produce a non-corrosive surface on iron and steel without affecting the physical properties of these base metals.

Aluminum - Bronze Compacts And Their Possible Use As A Bearing Material, Donald J. Mcmaster

Bachelors Theses and Reports, 1928 - 1970

In the modern aspect of powder metallurgy, the first use of a sintering process was in making filaments for incandescent electric lamps.In the short while from the day of Edison to the pres­ent, the science of working with metal powders has advanced by leaps and bounds.

Leaching Of Low Grade Rhodochrosite, E. D. King

Bachelors Theses and Reports, 1928 - 1970

Although there are many uses for manganese today, none of them approaches its importance as a deoxidizing agent in the manufac­ture of steels. Without manganese the steelmaking in­dustry would be very seriously handicapped. The metal­lurgy of manganese has been developed around the high-grade ores, and unfortunately, our reserves of high-grade ores are very limited.

An Investigation Of A Particular Weldment Failure, Byron Clow

Bachelors Theses and Reports, 1928 - 1970

Two sets of weld-test coupons, supposedly made under identical conditions, were submitted to this institution last year for approval and certification under the A.S.M.E. Welder's Qualification Code. The first set of coupons was unsatisfactory. The second set, made by the same operators one month later, was satisfactory.

The Corrosion Resistance Of Iron-Tin Compacts As Produced By Powder Metallurgy, Robert W. Gambill

Bachelors Theses and Reports, 1928 - 1970

The art of Powder Metallurgy deals with the preparation of metal powders and their utilization. As a more pertinent definition, the following has been suggest­ed: "Powder Metallurgy is the art of producing metal powders and shaped objects from individual, mixed, or alloyed metal powders, with or without the inclusion of non-metallic consti­tuents".

Electro-Deposition Of Iron From A Chloride Bath, Charles W. Noon

Bachelors Theses and Reports, 1928 - 1970

Iron was electro-deposited from a ferrous chloride bath. Studies were made of deposits formed when current density was varied, and fin­ally when both current density and temperature were changed. An attempt was made to lay the ground work for a long range study of the chloride bath, and to determine the most simple conditions possible for obtaining a smooth, even, and thick deposit.

Age Hardening Of Copper Antimony Alloys, William R. Stern

Bachelors Theses and Reports, 1928 - 1970

A large number of alloys of varying percentages of copper and antimony were prepared. These alloys were treated in various ways which might be expected to produce age hardening. The effect of cold working was studied in the range where the alloys were malleable.

The Effect Of Boron On The Hardenability Of Steel, William J. Foy

Bachelors Theses and Reports, 1928 - 1970

Many attempts have been made to improve iron and steel and their alloys by the addition of boron. The re­sults obtained were not encouraging for the reason that the amount of boron used, generally from 0.2 to 2.0 per cent is altogether too high. This percentage of boron ren­ders the product hard and brittle and of late the experiments with boron in this connection have been practically abandoned.

Electrolytic Deposition Of Iron, Irving M. Kenoffel

Bachelors Theses and Reports, 1928 - 1970

In this thesis the purpose was to obtain a good iron deposit from a relatively simple bath. The deposit was to be of good nature and low in Carbon content. Also included is a summary of the uses to which electrolytic iron can be put as well as a summary of work done by other researchers in depositing iron electrolytically.

The Determination Of Aluminum In The Presence Of Manganese And Iron By The Use Of A Mercury Cathode, William R. Opie

Bachelors Theses and Reports, 1928 - 1970

Since 1880, when Wolcott Gibbs made the suggestion that mercury could be used as a cathode in gravimetric electroanalysis, many articles have appeared in literature either criticizing the method or citing successful results which have been obtained by it.

The Electrowinning Of Manganese From Rhodochrosite, Lloyd L. Thompson

Bachelors Theses and Reports, 1928 - 1970

Manganese is commonly known to be a metal of great strategic importance. It is essential in the production of all steels, first as a scavenger to remove oxygen and sulfur, and second as an alloying element in wear-resis­tant steels.

The Extraction Of Chromate Salts From Montana Chromite, Server Tasdemiroglu

Bachelors Theses and Reports, 1928 - 1970

In this thesis I have tried to determine the suit­able temperature, time and the amount of soda ash and lime needed for the calcining process. The leaching and purification tests were studied experimentally. The earlier process for making chromate from chromite was not the same as is used today. There­fore I have found it useful to put into this thesis the newest method for making chromate salts and their important uses.

The Testing And Concentration Of A Tungsten Ore, Turdat S. Simone

Bachelors Theses and Reports, 1928 - 1970

At the present time the principal uses for tungsten lie in the manufacture of ferro-alloys and tungsten steels. Due to it’s hardening and strengthening characteristics it holds an important position among steel hardening metals. The great rush for it’s production during the World War years clearly points to it’s importance in the manufacture of armament.

A Rapid Determination Of Small Amounts Of Lead In Zinc, George T. Hanson

Bachelors Theses and Reports, 1928 - 1970

This investigation, carried on in the metallur­gical laboratories at the Montana School of Mines, was undertaken with the desire to work out a rapid method for the estimation, or the determination, of the amount of lead in zinc.