Engineering Commons^™

Utilization Of Caputo Fractional Derivative In Mhd Nanofluid Flow With Soret And Thermal Radiation Effects, Harshad Patel, Gopal Nanda

Applications and Applied Mathematics: An International Journal (AAM)

In existence of heat diffusion and thermal radiation, an analytical equation is found for unsteady MHD flow past an exponentially accelerating vertical plate in optically thick water based nanofluid. The governing equations are made dimensionless by similarity transformation. A definition of Caputo fractional derivative is applied to generalize governing system of partial differential equations. Laplace transform techniques are applied and obtained the analytical solutions of proposed problems. For a physical point of view, numerical results are obtained using MATLAB software and presented via graphs. From the results, it is concluded that magnetic fields tend to reduce velocity. It is also …

Mathematical Modeling Of Fruit Drying And System Analysis Of The Process (On The Example Of Persimmon), Gani Dadayev, Jasur Safarov, Shakhnoza Sultanova, Qobiljon Muxiddinov

Technical science and innovation

Vegetable raw materials, as an object of drying, are characterized by a large amount of water and a low content of dry substances. Vegetable raw materials have a capillary-porous structure. Food products contain both bound and free moisture at the same time. The removal of moisture from the material during drying depends on the total moisture content and the form of connection of moisture with the material. Adsorption and osmotic - bound moisture is retained at the interface of colloidal particles with the environment. Food products contain both bound and free moisture at the same time. The quantitative ratio between …

Improvement Of Convective Drying Equipment, A Ponasenko, Jasur Safarov, Shaxnoza Sultanova

Technical science and innovation

Drying of agricultural raw materials is an energy-consuming but integral process. Therefore, increasing the efficiency of drying and improving the quality indicators of dried material at minimum material and energy costs is relevant for producers of agricultural products. By present time numerous researches on improvement of constructions and processes of work of dryers providing satisfactory parameters of energy saving have been carried out. In some scientific materials it is shown that the use of generative gas and straw as fuel allows to reduce energy costs for the drying process in the fluidised bed dryer by 10-30%, the quality of seeds …

Characterization Analysis And Design Of Mid-Wave Infrared Iii- V-Based Type-Ii Superlattice Nbn Photodetectors For Space Applications, Alexander Timothy Newell

Electrical and Computer Engineering ETDs

The performance of the mid-wave infrared InGaAs/InAsSb nBn photodetector is investigated and its viability for space applications is assessed. Three structures are grown with unique absorber layer doping profiles via molecular beam epitaxy. Material and device characterizations are performed and analyzed to determine the effects of doping on fundamental material parameters and detector performance. Noise-equivalent irradiance is calculated to be a factor of 4x that of an ideal detector exhibiting Rule 07 dark current and 100% quantum efficiency, demonstrating high sensitivity. The structures are then irradiated with 63 MeV protons to evaluate the extent of performance degradation over the course …

Nonsolvent-Induced Phase Separation Inside Liquid Droplets, Rami Alhasan, Tanner A. Wilcoxson, Dakota S. Banks, Sion Jung, Douglas R. Tree

Faculty Publications

Nonsolvent-induced phase separation (NIPS) is a popular method for creating polymeric particles with internal microstructure, but many fundamental questions remain surrounding the kinetics of the complex coupled mass transfer and phase separation processes. In this work, we use simulations of a phase-field model to examine how (i) finite domain boundaries of a polymer droplet and (ii) solvent/nonsolvent miscibility affect the NIPS process. To isolate the effects of phase separation kinetics and solvent/nonsolvent mass transfer on the NIPS process, we study two different cases. First, we investigate droplet concentrations that originate inside the two-phase region, where phase separation kinetics alone governs …

Estimation Of Free Water-Corrected Microscopic Fractional Anisotropy., Nico J J Arezza, Tales Santini, Mohammad Omer, Corey A Baron

Medical Biophysics Publications

Water diffusion anisotropy MRI is sensitive to microstructural changes in the brain that are hallmarks of various neurological conditions. However, conventional metrics like fractional anisotropy are confounded by neuron fiber orientation dispersion, and the relatively low resolution of diffusion-weighted MRI gives rise to significant free water partial volume effects in many brain regions that are adjacent to cerebrospinal fluid. Microscopic fractional anisotropy is a recent metric that can report water diffusion anisotropy independent of neuron fiber orientation dispersion but is still susceptible to free water contamination. In this paper, we present a free water elimination (FWE) technique to estimate microscopic …

Effects Of Confinement On Ionic Liquids And Deep Eutectic Solvents For The Design Of Catalytic Systems, Electrochemical Devices, And Separations, Andrew Drake

Theses and Dissertations--Chemical and Materials Engineering

Confinement of ionic liquids (ILs) and deep eutectic solvents (DESs) within mesoporous materials such as silica helps to control the local environment within the pores for applications such as catalysis, electrochemistry, and absorption. Silica thin films with 2.5 and 8 nm pores and micron-sized silica particles with pore diameters of 5.4 and 9 nm were synthesized to study the effect of nanoconfinement on ILs 1-butyl-3-methylimidazolium hexafluorophosphate ([BMIM][PF₆]), 1-butyl-3-methylimidazolium chloride ([BMIM][Cl]), and DESs reline and ethaline (choline chloride and urea or ethylene glycol). Silica thin films with vertically aligned, well ordered, and accessible pores were synthesized via the evaporation-induced …

Sustainable Material For Urea Delivery Based On Chitosan Cross-Linked By Glutaraldehyde Saturated Toluene: Characterization And Determination Of The Release Rate Mathematical Model, Jayanudin Jayanudin, Retno S. D. Lestari, Indar Kustiningsih, Dandi Irawanto, Rozak Rozak, Reyonaldo L. A. Wardana, Fakhri Muhammad

Karbala International Journal of Modern Science

The aims of this study were to characterize the urea-loaded chitosan microspheres and determine the release kinetic constants and diffusion coefficients. An emulsion cross-linking method was used to prepare the urea-loaded chitosan microspheres. Urea was dissolved in a solution of chitosan then put into vegetable oil and stirred to form an emulsion. Glutaraldehyde saturated toluene (GST) was added into the emulsion dropwise while continuously stirring for the solidification process. Chitosan microspheres filled with urea were washed, dried, and then analyzed. Characterization of the urea-loaded chitosan microspheres was conducted using a scanning electron microscope (SEM), Raman spectroscopy, X-ray diffraction, and particle …

Mocmin: Convex Inferring Of Modular Low-Rank Contact Networks Over Covid Diffusion Data, Emre Sefer

Turkish Journal of Electrical Engineering and Computer Sciences

SEIR (which consists of susceptible, exposed, infected, and recovered states) is a common diffusion model which could model different disease propagation dynamics across various domains such as influenza and COVID diffusion. As a motivation, across these domains, observing the node states is relatively easier than observing the network edges over which the diffusion is taking place, or it may not even be possible to observe the underlying network. This paper focuses on the problem of predicting modular low-rank human contact network edges only if a SEIR diffusion dynamics spreading among the human on their contact network can be observed. Such …

Synthesis Of Alginate/Hydroxyapatite Beads For Acetaminophen Delivery, Anesylvia Angan, Nonni Soraya Sambudi

Makara Journal of Science

Conventional drug delivery systems usually involve the intake of multiple drugs, which could amplify the risk of overdosing. Acetaminophen is a widely used pain relief substance that is prone to accidental overdosing. Hence, a controlled drug delivery system is needed to ensure its efficacy. A nanocomposite hydroxyapatite/alginate system that was used as a drug carrier for acetaminophen was synthesized through the sol-gel method, and the mechanism underlying its controlled drug delivery was investigated. Spherical nanocomposite bead samples were synthesized by incorporating 5 wt%, 10 wt%, and 15 wt% hydroxyapatite into mixtures containing alginate. The mixtures were then dropped into calcium …

A Detailed Parameter Study Into The Dermal Absorption Of Chemical Warfare Agents And The Effects Of Pharmacokinetics, Koko Lear

Theses

Chemical warfare agents (CWAs) are substances of varying toxicity profiles. These chemicals exhibit complex dynamics and pose a serious health risk when released into the environment. A mathematical model based on Fick’s second law of diffusion was developed to comprehend how these compounds were absorbed into the skin. The analysis applied to both small and large doses and, successfully, predicted experimental results. This work also includes the effects of CWA physicochemical properties on evaporation and dermal absorption through the stratum corneum. A sensitivity analysis was conducted to assess the impacts of small variations in the initial dose, environmental conditions, and …

Diffusion Of A Salt In An Aqueous Media, Aldaly Pineda Hernandez

Chemical Engineering Undergraduate Honors Theses

Diffusion is defined as the net transfer of a molecule from a high concentration region to a low concentration region. The concept of diffusion is used in a very important process called "desalination." Desalination is a separation process used to reduce the salt content dissolved in brackish water to make it suitable for human consumption, irrigation, and industrial use.

In desalination plants, it is important to monitor the constantly changing salt content of water, partly due to the diffusive effect. The main purpose of this experiment was to study the diffusion of NaCl in water at two NaCl concentrations. The …

A Multi-Ion Diffusion Model Through Clay Barriers Under Combined Action Of Chemical And Diffusion Potential, Zhi-Hong Zhang, Lin Han, Qing-Shuo L

Rock and Soil Mechanics

Diffusion is an important phenomenon that governs contaminant transport through compacted clay liner at the bottom of landfill. The diffusion process is influenced by many factors, i.e., type, valence and concentration of ions. Therefore, an accurate diffusion model is of great importance for the design of liner system of landfill. The simplified Guntelberg activity coefficient was introduced to indicate concentration difference between ideal solution and actual solution. The driving force of diffusion usually considered combined action of chemical and diffusion potential. The semipermeable membrane effect of clay was considered. A diffusion model describing simultaneous movement of multi-ions through clay barrier …

Molecular Dynamics Study Of Atomic Diffusion In Cantor High Entropy Alloy In The Selective Laser Melting Process, Mathew Z. Farias

Theses and Dissertations

High entropy alloys (HEAs) are compositionally complex alloys that are comprised of 5 or more principle elements at near equimolar concentrations. The Selective Laser Melting (SLM) method generally melts pure elemental powders or prefabricated alloy powders, this process allows for the production of heterogeneous structures that would be difficult to create through more conventional means. In-situ alloying in SLM, or Laser Additive Alloying (LAA), using pure elemental powders is a promising means of producing what would otherwise be costly and difficult to fabricate products with less defects using prefabricated powders, therefore this new approach could enable the ability to …

Single-Molecule Localization Microscopy Of 3d Orientation And Anisotropic Wobble Using A Polarized Vortex Point Spread Function, Tianben Ding, Matthew D. Lew

Electrical & Systems Engineering Publications and Presentations

Within condensed matter, single fluorophores are sensitive probes of their chemical environments, but it is difficult to use their limited photon budget to image precisely their positions, 3D orientations, and rotational diffusion simultaneously. We demonstrate the polarized vortex point spread function (PSF) for measuring these parameters, including characterizing the anisotropy of a molecule’s wobble, simultaneously from a single image. Even when imaging dim emitters (∼500 photons detected), the polarized vortex PSF can obtain 12 nm localization precision, 4°–8° orientation precision, and 26° wobble precision. We use the vortex PSF to measure the emission anisotropy of fluorescent beads, the wobble dynamics …

Enhanced Oil Recovery In Tight Rocks Using The “Slot-Drill” Completion, Hassan Amer

LSU Master's Theses

Enhanced oil recovery (EOR) is essential in shale/tight formations because primary recovery typically produces less than 10% of the original hydrocarbon in-place (OHIP). This work presents a novel “slot-drill” EOR technology, which involves injecting gas through a horizontal fracture that is cut into the formation near the top of the reservoir (using a tensioned abrasive cutting cable mounted to the drillstring) and producing oil from a second slot-drilled horizontal fracture near the bottom of the reservoir.

The dusty-gas diffusion model was implemented in a compositional simulator to account for the diffusion mechanism expected during the injection of gases in this …

Establishing Independent Tunability Of The Mechanical And Transport Properties Of Polymer Gels, Lucas Rankin

Master’s Theses

Polymer gels can be used in the fabrication of materials for filtering liquid and gaseous media, solid-state electrolytes, and transdermal medical patches. This diverse range of applications primarily relies on the transport and mechanical properties of polymer gels. Both sets of properties have shown excellent tunability, but typically in a coupled fashion. Establishing the independent tunability of the transport and mechanical properties of polymer gels (using simple, cost-effective methods) is paramount if polymer gels are to be used to their full potential. Specifically, block copolymer gels self-assemble into organized nanoscale networks within the gel solvent, which allows for facile control …

Complementary Techniques To Study The Behavior Of Water And The Effect On Diffusion And Degradation In Hydrogels, Paige Rockwell

Master’s Theses

Hydrogels exhibit biocompatibility in a range of biomedical applications, including drug delivery. This thesis aims to develop complementary techniques to measure the diffusion and degradation behaviors within an injectable, hydrolytically degradable hydrogel, formed via the covalent crosslinking of ethoxylated trimethylolpropane tri-3- mercaptopropionate (ETTMP) and poly(ethylene glycol) diacrylate (PEGDA), to determine its suitability as a drug delivery matrix. The characterization of water as either free, within the network openings of the hydrogel, or bound, tightly associated with the polymer chains, was determined using differential scanning calorimetry (DSC). The mobility of each type of water within the hydrogels was determined via nuclear …

Effects Of Microporous Structure On The Enzymatic Conversion Of Biomass Using A Multiscale Model, Saketh Merugu

Dissertations, Master's Theses and Master's Reports

The generation of biofuels from lignocellulosic biomass involves innovative process technology that is being investigated worldwide. Enzymatic hydrolysis is a major step in the contemporary process of the generation of biofuels. Guided by pore size distribution measured using NMR cryoporometry, we developed pore-enzyme diffusion and adsorption models at the particle level coupled with a kinetic model for cellulose, cellobiose, and glucose production at flask level. By simulating these models in MATLAB, COMSOL, and Polymath software packages, we investigate the effects of various biomass particle-related parameters (particle dimensions, porosity, enzyme accessibility) on the characteristic time of enzyme diffusion and adsorption and …

Theoretical Analysis Of Experimental Data Of Sodium Diffusion In Oxidized Molybdenum Thin Films, Orlando Ayala, Benjamin Belfore, Tasnuva Ashrafee, John Akwari, Grace Rajan, Shankar Karki, Deewakar Poudel, Sylvain Marsillac

Engineering Technology Faculty Publications

In this work, the diffusion process of sodium (Na) in molybdenum (Mo) thin films while it was deposited on soda lime glass (SLG) was studied. A small amount of oxygen was present in the chamber while the direct-current (DC) magnetron sputtering was used for the deposition. The substrate temperatures were varied to observe its effect. Such molybdenum films, with or without oxidations, are often used in thin film solar cells, either as back contact or as hole transport layers. Secondary ion mass spectrometry (SIMS) was used to quantify the concentration of the species. A grain diffusion mechanistic model incorporating the …

Assessing The Impact Of Block-Selective Homopolymers On The Diffusion Of Payload Through Polymeric Organogels, Ian Coates

Honors Theses

Styrenic polymer gels have received recent attention for their application in transdermal patches due to their unique properties. Previous research in the pharmaceutical industry has identified that polymeric gels, specifically styrenic gels, have the potential to encompass multiple functions of the transdermal delivery patch including controlling mechanical and delivery properties. To tailor styrenic gels either the gel nanostructure or the drug complex can be controlled. Specifically, this thesis investigated the effect of gel nanostructure in an attempt to control the gel diffusivity and mechanical properties. To control gel nanostructure a phase selective styrene homopolymer was used at varying concentrations. It …

Functionalizing Ceramic Matrix Composites By The Integration Of A Metallic Substructure With Comparable Feature Size, Elizabeth Pierce Heckman

Browse all Theses and Dissertations

A metallic network has been embedded in a silicon carbide fiber– silicon carbide (SiC) matrix ceramic composite (CMC) in order to combine the functional properties of the metal and the structural properties of the CMC. The processing of the composite involves iterative pre-ceramic polymer infiltration and heating to temperatures at 1100°C. The metallic structure embedded in the CMC must retain its unique properties during processing and cannot convert to a silicide or carbide resulting from diffusion of Si and C species from the SiC matrix. To gain an understanding of the diffusion process, a fully processed CMC with tungsten, tantalum, …

Modeling Mass Transfer And Chemical Reaction In Industrial Nitrocellulose Manufacturing Processes, Francis Patrick Sullivan

Dissertations

A series of models are proposed to describe the production of military grade nitrocellulose from dense cellulose materials in mixtures of nitric acid, sulfuric acid, and water. This effort is conducted to provide a predictive capability for analyzing the rate and extent of reaction achieved under a range of reaction conditions used in the industrial nitrocellulose manufacturing process for sheeted cellulose materials. Because this capability does not presently exist, nitrocellulose producers have historically relied on a very narrow range of cellulose raw materials and resorted to trial and error methods to develop processing conditions for new materials. This tool enables …

Mitigation Of Electromigration In Metal Interconnects Passivated By Ångstrom-Thin 2d Materials, Yunjo Jeong

USF Tampa Graduate Theses and Dissertations

Electromigration in metal interconnects remains one of the most prominent challenges in the state-of-the-art semiconductor industry. A phenomenon defined as the momentum transfer from electrons in an electric current to the metal atoms in a conductor, electromigration creates voids and hillocks that ultimately cause failures in nanoelectronics due to short or open circuits. Additionally, electromigration induces undesirable diffusion of metal atoms into the dielectric material, forcing the need for a barrier material that can mitigate such adverse effects of the phenomenon. However, extremely tight dimensional control of modern transistor designs imposes reduced dimensions of the interconnects in order to accommodate …

Prediction On Service Life Of Concrete Pipeline Buried In Chlorinated Environment Under Nonuniformly Distributed Earth Pressure, Lin Li, Weibing Gong, Jingpei Li

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

This paper proposes an analytical model to estimate the service life of concrete pipelines buried in chloride contaminated soils, which properly considers the effects of nonuniformly distributed earth pressures on both the internal tensile stress of concrete protective cover and the chloride diffusion coefficient through the nonhomogeneous coefficient of earth pressure. It is assumed that the underground concrete pipeline arrives at the service life end when cracking induced by expansion pressure due to the corrosion products occurs in the concrete protective cover. Hence, the whole service life of underground concrete pipeline is composed of chloride diffusion period and protective cover …

Elucidating The Properties And Mechanism For Cellulose Dissolution In Tetrabutylphosphonium-Based Ionic Liquids Using High Concentrations Of Water, Brad Crawford

Graduate Theses, Dissertations, and Problem Reports

The structural, transport, and thermodynamic properties related to cellulose dissolution by tetrabutylphosphonium chloride (TBPCl) and tetrabutylphosphonium hydroxide (TBPH)-water mixtures have been calculated via molecular dynamics simulations. For both ionic liquid (IL)-water solutions, water veins begin to form between the TBPs interlocking arms at 80 mol % water, opening a pathway for the diffusion of the anions, cations, and water. The water veins allow for a diffusion regime shift in the concentration region from 80 to 92.5 mol % water, providing a higher probability of solvent interaction with the dissolving cellulose strand. The hydrogen bonding was compared between small and large …

Capillary Flow Of Liquid Aluminum Alloy In Wetting And Wetting/Non-Wetting Systems, Yangyang Wu

Theses and Dissertations--Mechanical Engineering

In this dissertation, the capillary flow of liquid aluminum alloy in both wetting and wetting/non-wetting systems is investigated.

The impact of gravity and surface topography on the capillary flow has been studied in a wetting/non-wetting assembly (an AA3003/Al₂O₃ wedge-tee configuration). The research includes (i) kinetics of liquid Al-Si-K_xAl_yF_z alloy triple line movements and dynamic macro advancing and receding contact angles and (ii) free surface profiles of the molten alloy driven by surface tension and impacted by gravity. A trade-off between the surface tension and gravity force has been found by calculating the …

Polymeric Impulsive Actuation Mechanisms: Development, Characterization, And Modeling, Yongjin Kim

Doctoral Dissertations

Recent advances in the field of biomedical and life-sciences are increasingly demanding more life-like actuation with higher degrees of freedom in motion at small scales. Many researchers have developed various solutions to satisfy these emerging requirements. In many cases, new solutions are made possible with the development of novel polymeric actuators. Advances in polymeric actuation not only addressed problems concerning low degree of freedom in motion, large system size, and bio-incompatibility associated with conventional actuators, but also led to the discovery of novel applications, which were previously unattainable with conventional engineered systems. This dissertation focuses on developing novel actuation mechanisms …

Capacitive Spectroscopy Of Defects In Semiconductors, Doped By Atoms Of Gadolinium, Shoakhriyor B. Norkulov, Khodjakbar S. Daliev, Makhmud Sh. Dehkanov, Uktam K. Erugliev

Euroasian Journal of Semiconductors Science and Engineering

The processes of formation of defects in silicon, doped by gadolinium are investigated by the method of DLTS. It is shown that in diffusion the introduction of Gd in the Si leads to the formation of deep levels with ionization energies Ec–0.23 eV, Ec–0.35 eV, Ec–0.41 eV and Ec–0.54 eV and a capture cross section of electrons n: 410-17cm-2, 210-15 cm2, 1.110-16 cm2 and 1.510-15 cm2, respectively, and in samples p-Si found only one level with Ev+0.32 eV.

Calculation And Tabulation Of Efficiencies For Tungsten Foil Positron Moderators, R. Alsulami, M. Albarqi, S. Jaradat, Shoaib Usman, Joseph T. Graham

Nuclear Engineering and Radiation Science Faculty Research & Creative Works

Monte Carlo radiation transport simulations were used to calculate the positron stopping profiles in tungsten positron moderator foils. Stopping profiles were numerically integrated with efficiency kernels derived from Green's function solutions of the 3D diffusion equation to determine the moderation efficiency in both the backscattering and transmission geometries. Stopping profiles and efficiencies were calculated for positron energies from 10 keV to 10 MeV and incident angles from 0° to 75°. The resulting efficiencies agreed with other calculated and measured values in the literature, especially when similar values of the positron diffusion length and surface emission branching ratio were used. Large …