Engineering Commons^™

Cisco Nexus 9200 Robustness Redesign, Colin Berge, Ethan Gold, Cole Christopherson, Rahul Makhijani

Industrial and Manufacturing Engineering

Certain configurations of Cisco's Nexus 9200 product experienced issues with bending during shipping. Two solutions were developed to eliminate this problem: an external brace that could quickly address the problem yet was expensive and unsustainable, and a redesigned chassis, which was more economical but came with a longer time to implement. Real world packaging and shipping conditions were simulated in SolidWorks and Finite Element Analysis was used to model the stresses experienced when the product is dropped. Both designs were found to significantly reduce stress in critical areas, thus reducing the chance of failure and the cost of the problem. …

Redesign Of Cubesat For Beam Charging, Kuba Preis

Industrial and Manufacturing Engineering

This paper is intended to be a study in the applications of the design freedom granted by additive manufacture in the design of a 1U CubeSat frame. The main loads experienced by a CubeSat are structural (during launch) and thermal (solar radiation). Beam charging is an emerging technology which involves charging a CubeSat using a laser beam. In this paper, a CubeSat frame was redesigned to account for the structural loads induced during launch and the thermal loads induced when beam charging. The thermal, weight, design, and structural requirements for a new CubeSat design were derived. The 1U CubeSat frame …

Additive Manufacturing Powder Removal: Viper 2.0, Andrew D. Epperson, Sean Mccracken, Melissa O'Neil, Alex Ward

Mechanical Engineering

This report presents the final design review of this senior project team. The project is being sponsored by Lawrence Livermore National Laboratory, a federal design agency. Lawrence Livermore National Laboratory is interested in improving their metal additive manufacturing process. The goal of this senior project is to improve the efficiency and safety of a method currently being used to remove metal powders for additively manufactured components. A senior project team in 2017-2018 created the Vibration Induced Powder Evacuator and Reclaimer (VIPER), a device that uses a vibration motor to shake a printed part until it is clean from excess powder. …

Methodology To Qualify And Monitor A Chemically Bonded Sand System Used In Foundries, Prayag Pravinbhai Patel

Dissertations

The goal of this dissertation is to establish a new quality control framework that combines a statistical process control (SPC) approach to casting quality for chemically bonded sand systems used in foundries. Foundries in the United States use the American Foundry Society standardized sand testing to monitor chemically bonded sand systems. These standardized tests are inefficient for two reasons. Firstly, standard tests are based on mechanical, physical, chemical and thermal properties of a sand system that do not consider interaction between these properties, but sand casting processes are inherently thermo-mechanical, thermo-chemical and thermo-physical. Secondly, these tests can only detect large …

Application Of Big Data Analytics In Agriculture Supply Chain Management, Sankara Narayanan Mangalam Ananthapadmanabhan

Master's Theses

The increasing trend in frequency of natural disasters in tandem with globalization of business makes the agricultural supply chain significantly vulnerable to disruption. This thesis presents a pragmatic approach for creating a Business Continuity Model that can notify supply chain planners when there is an increase in risk of agriculture supply chain disruption due to natural disasters. The methodology presented in this thesis applied big data analytics and machine learning algorithms along with agriculture product related exponential decay function to create a regionalized composite risk score, that incorporated both direct and indirect risk associated with the Agriculture Fresh Supply Chain. …

Characterization Of Resistance Change In Stretchable Silver Ink Screen Printed On Tpu-Laminated Fabrics Under Cyclic Tensile Loading, Corey R. Sutton

Master's Theses

A stretchable silver ink was screen printed to TPU sheets, then tensile coupons of the TPU, both bare and laminated to cotton, Denim and spandex fabric, were subjected to 1000 cycles of 20% uniaxial strain. In-situ resistance measurements of printed traces were processed to generate datasets of maximum and minimum resistance per cycle. A mechanistic fit model was used to predict the resistance behavior of the ink across TPU/fabric levels. The results show that traces strained on TPU laminated to spandex (polyester) fibers had an average rate of increase in resistance significantly lower than that of traces strained on bare …

Interventions Of Waterjet Technology In Skin Incisions, Nadi Atalla

Dissertations

This research explores the use of waterjet (WJ) technology in performing skin incisions. The study defines the analytical relationships between the skin properties and the operating parameters of the WJ which include the skin thickness, its elastic modulus, the WJ pressure, the nozzle’s orifice diameter, its stand-off distance and the traverse speed of the WJ as well as the duration of applying the WJ pressure. An analytical model is developed to measure the depth incision of the skin, the water pressure and the water velocity, while using a WJ. Systemization and optimization models that determine the optimal operating parameters levels …

Design And Implementation Of An Automated Oil Distribution System For A Homogenizer Machine In Gea Mechanical Equipment – Niro Soavi, Luca Gandolfi

Theses

This thesis shows the steps that have been followed and done in order to improve a critical operation of a technological process of the GEA Mechanical Equipment. The critical operation was the filling with different types of oils the homogenizing machine because it was characterized by a lot of inefficiencies and, in particular, by huge risks for job security. These critical issues gave the opportunity and the chance to realize a project in order to give a process optimization and security improvement.

After having faced all the aspects and steps needed for this project, it has been realized a system …

Analysis Of A Garment-Oriented Textile Recycling System Via Simulation Approach, Reyhaneh Yavari

Major Papers

The textile industry is one of the polluting industries on the planet. Public awareness has increased manufacturers responsibility and forced them to shift from linear to the circular production line to reduce the amount of environmental impact such as; energy and freshwater consumption, toxic and fertilizer usage and cutting down the use of raw material. Also, some new business strategies like fast fashion which is a recent trend in the fashion industry by offering fast changing trend and inexpensive designs accelerate the process of purchasing new clothes that end up in landfills. Recycling, remanufacturing and reusing are some practices that …

Using Pythagorean Fuzzy Sets (Pfs) In Multiple Criteria Group Decision Making (Mcgdm) Methods For Engineering Materials Selection Applications, Alaa Fouad Momena

Theses and Dissertations

The process of materials’ selection is very critical during the initial stages of designing manufactured products. Inefficient decision-making outcomes in the material selection process could result in poor quality of products and unnecessary costs. In the last century, numerous materials have been developed for manufacturing mechanical components in different industries. Many of these new materials are similar in their properties and performances, thus creating great challenges for designers and engineers to make accurate selections. Our main objective in this work is to assist decision makers (DMs) within the manufacturing field to evaluate materials alternatives and to select the best alternative …

A Study Of Nonlinear Dynamics Of Eeg Responses To Simulated Unmanned Vehicle Tasks, Ziqing Xu

Electronic Theses and Dissertations

In the contemporary world, mental workload becomes higher as technology evolves and task demand becomes overwhelming. The operators of a system are usually required to complete tasks with higher complicity within a shorter period of time. Continuous operation under a high level of mental workload can be a major source of risk and human error, thus put the operator in a hazardous working environment. Therefore, it is necessary to monitor and assess mental workload. In this study, an unmanned vehicle operation with visual detection tasks was investigated by means of nonlinear analysis of EEG time series. Nonlinear analysis is considered …

Hybrid Life Cycle Sustainability Assessment-Based Multi-Objective Optimization: A Case For Sustainable Fleet Mix, Burak Sen

Electronic Theses and Dissertations

Sustainable transportation idea includes not only switching from conventional energy sources to alternative fuel resources, but also diverging from private vehicle use and shifting to alternative transportation modes. As a part of alternative transportation mode, utilizing alternative fuels in public transportation operation supports sustainable transportation at it full-glance. Given their implications in terms of air quality and sustainable movement of people, transit buses, which provide the primary public transportation service, are considered an ideal domain for the deployment of alternative fuels. An input-output (IO) model is developed based on Eora database – a detailed IO database that consists of national …

Data Visualization Of Treatment Outcomes For Tuberculosis Patients, Joy Jenkins

Industrial Engineering Undergraduate Honors Theses

Tuberculosis is an infectious disease, and different treatments have been discovered over the years. However, patients may develop various drug resistance levels that affect the likelihood of becoming cured or dying. In this study, we sought to employ data visualization to explore the relationship between treatment trajectory, as indicated by smear and culture results in the follow-up tests and patient outcomes. A large sample of patients have been broken down by demographics including age, gender, and drug resistance status. Sankey diagrams were used to visualize the pathway progression of the patients over time split between two time periods- months 0-6 …

Benchmarking Oecd Countries’ Sustainable Development Performance: A Goal-Specific Pca Approach, Shyam Lamichhane

Master's Theses

In this thesis, the current status of the Organisation for Economic Co-operation and Development (OECD) countries’ sustainable development performance towards reaching the recently announced 2030 Agenda (17 UN Sustainable Development Goals (SDGs)) was investigated. Over 90 social, economic and environmental sustainability indicators were considered for the performance assessment of OECD countries towards reaching the targeted SDGs. The current weighted averaging approach used in the recent SDG Index and Dashboards Report was used as the benchmark and its limitations were discussed. To overcome the limitations, a novel Goal Specific Principal Component Analysis (GS-PCA) approach was proposed to create composite sustainability index …

Interfaith Health Clinic Electronic Records Implementation Of Standard Operating Procedures, Payton E. Garland, Emily Mae Diehl, Clark Michael Legac, Joshua Presnell

Chancellor’s Honors Program Projects

No abstract provided.

Characterizing Truck Parking Shortages In Arkansas: A Data Analytical Approach, Morgan Hartsell

Industrial Engineering Undergraduate Honors Theses

The Truck Parking Problem occurs when drivers have met the daily driving limit and encounter a decision between driving over time or parking in unauthorized locations. This research applies data analytics to gain further knowledge to characterize the truck parking shortage in Arkansas. Truck parking shortages are a serious problem that truck drivers face daily and is complex due to Hours of Service (HOS) regulations restrictions on legal parking areas and design. Existing research includes a one-day annual survey which compiles where public rest stops, businesses, and private rest stops are utilized by truck drivers. This research expands on the …

Modeling Of Complex Parts For Industrial Waterjet Cleaning, Braden James

Graduate Theses and Dissertations

Industrial high-pressure waterjet cleaning is common to many industries. The modeling in this paper functions inside a collaborative robotic framework for high mix, low volume processes where human robot collaboration is beneficial. Automation of pressure washing is desirable for economic and ergonomic reasons. An automated cleaning system needs path simulation and analysis to give the operator insight into the predicted cleaning performance of the system. In this paper, ablation, the removal of a substrate coating by waterjet, is modeled for robotic cleaning operations. The model is designed to work with complex parts often found in spray cleaning operations, namely parts …

Simulating Alternative Tuberculosis Diagnosis Methods In Underdeveloped Countries, Luke Turner

Industrial Engineering Undergraduate Honors Theses

Tuberculosis is the deadliest infectious disease in the world; it is especially rampant in underdeveloped countries because they do not have the infrastructure, technology, or funding to properly combat the infection. However, the development of portable point-of-care diagnosis machines can reverse this epidemic as they far surpass conventional laboratory identification. The question now is where to place these machines, which is a difficult decision with a lack of data. Therefore, a flexible simulation model is created to test the implementation of these machines with different countries and configurations. The simulation tests the baseline model and three proposed implementations of the …

Maximizing Space Utilization In Unit-Load Warehouses., Luis Felipe Cardona Olarte

Electronic Theses and Dissertations

In a unit-load warehouse, products are stored and retrieved in pallet quantities. Examples include retail distribution centers (DC), third-party DCs, and transshipment hubs in freight transportation. Expenses related to space are a significant component of the operational cost of unit-load warehouses; therefore, maximizing space utilization is important. Moreover, the continuing revolution of retail e-commerce is changing the role and design of modern distribution centers (Boysen et al., 2018). An important trend with serious implications for design is the desire of many distributors to locate DCs in or near metropolitan areas in order to support same-day service or better (Thuermer, 2018). …

A Two-Stage Approach To Ridesharing Assignment And Auction In A Crowdsourcing Collaborative Transportation Platform., Peiyu Luo

Electronic Theses and Dissertations

Collaborative transportation platforms have emerged as an innovative way for firms and individuals to meet their transportation needs through using services from external profit-seeking drivers. A number of collaborative transportation platforms (such as Uber, Lyft, and MyDHL) arise to facilitate such delivery requests in recent years. A particular collaborative transportation platform usually provides a two sided marketplace with one set of members (service seekers or passengers) posting tasks, and the another set of members (service providers or drivers) accepting on these tasks and providing services. As the collaborative transportation platform attracts more service seekers and providers, the number of open …

Supply Chain Network Analysis For Outboard Motors At Motor Boaters Usa, Seyedalireza (Ali) Ghiasi, Chase Griffith, Djanene Manuel, Yesenia Pérez, Alvand Rafiee

Senior Design Project For Engineers

Motor Boaters USA found themselves possibly spending too much on their current network distribution of small and large outboard motors and requested new distribution alternatives for the U.S. Through past network distribution data analysis, the team devised 3 scenarios it believed would provide one or more cost effective distribution networks applicable to the request. Through what-if analysis, the teams' calculations produced solid results, which were then presented to Motor Boaters USA for reflection and possible implementation.

Extreme Altitude Search And Rescue Helicopter, Matthew J. De Sieno, Anthony Chavarria, David Stuver, Zach Boss

Senior Design Project For Engineers

The goal of this design was to develop an extreme altitude rescue helicopter capable of retrieving hikers stranded on top of Mount Everest. Using the Eurocopter AS350 as a baseline, a conceptual model was produced that is fully capable of hovering and delivering forward flight at the desired altitude of 8,848 meters. Combined blade element momentum theory, proper airfoil selection, and forward flight calculations were utilized in order to optimize the rotor for the given flight conditions on top of Mount Everest. Conceptual fluid dynamics and CAD modeling aided in the process of visually designing the fuselage and rotor. Not …

Smart Flow Facility Analysis, Chantal Ann George, Pete Suktankar, Eric Wilson, Matthew Geiger

Senior Design Project For Engineers

The SMART Flow Design Team has been tasked in providing a physical layout for a single building facility used to consolidate three separate business units. The objective for the new facility will be to manufacture, receive, ship, and store the company's finished products. When designing the physical layout, the team must take into consideration stable and seasonal business volumes, current and future volume demand growth, designated inbound, outbound, and storage areas, and product turn rates. All specifications must be met while determining an efficient flow of goods. The team has designed indoor and outdoor layouts using Microsoft Visio, performed various …

90 Day Kit Assessment, Sarah Abdullah, Karim Daoudi, Jennifer Rutledge

Senior Design Project For Engineers

Field Service Products (FSPA) in Atlanta, GA provides Siemens Energy, Inc., with tool sets and systems used to work on Power Generation Equipment. When the FSPA receives the tool systems back from the customer, there is a window of 90 days in which the FSPA must verify that the tool systems were returned complete and operational. If the verification process happens within the 90-day window and something is missing from the system, the FSPA can bill the customer for the missing or damaged items. If the tool system is verified outside of the 90-day window, the FSPA must replace any …

Optimization Of The Retention Rates Of Ready Mix Usa Drivers, Pruthvi Hira, Jaime Harmon, Kenneth Correa, Destiny Sessums

Senior Design Project For Engineers

Ready Mix USA, a CEMEX company, is a giant in the building materials industry, servicing the Southeastern region of the United States through various commercial and residential projects. The Atlanta Division of RMUSA currently consists of 15 operational plants in the state of Georgia with its headquarters located in Woodstock. From the years 2015 to 2018, managers at Ready Mix USA noticed a drastic increase in turnover rates of ready mix truck drivers and did not have an answer for the increasing percentages. The Continuous Improvement at RMUSA tasked the student project team from the Industrial and Systems Engineering department …

Foster Care Support Foundation Volunteer And Capital Outreach Analysis, Abeer Bhatti, Alexandro Martinez, Sunny Patel, Desmond Vail

Senior Design Project For Engineers

Care Support Foundation (FCSF) provides free goods to children in Georgia. Annually, 11,000 volunteers are needed to deal with the massive influx of donations and fundraising events. Through our analyses, we aim to make recommendations to the FCSF, which can help raise funds and implement mitigating strategies that would increase funds and improve the foundation.

Improving Efficiency Of Manufacturing Cells, Conner Deneen

Honors Theses

Mann + Hummel is a tier one automotive supplier located in Portage, Michigan. The industry sponsor for this project is Director of Operations, Dan Kempisty with his supporting team, and the academic advisor for this project is Industrial Engineering Professor, Dana Hammond. The following report focuses on improving the efficiency of Cell 301 A and Cell 301 B which manufactures the air intake manifold for the Toyota Camry and Highlander. Topics analyzed in attempts to improve efficiencies include the following; standard operating procedures, line balancing, improving quality, reducing scrap, and analyzing non-value-added tasks. Time studies were conducted on each operator …

Dynamic Pricing Of Electricity And Demand Response In Smart Communities, Vignesh Subramanian

USF Tampa Graduate Theses and Dissertations

Grid modernization using advanced metering infrastructure (AMI) will continue to enhance timely communication among the system operator (SO), producers, and consumers. This will further empower the vision of dynamic pricing and demand side management (DSM). The phrase dynamic pricing in this dissertation refers to the practice of disclosing binding prices of electricity just ahead of consumption. As regards DSM, the focus is on collective demand response (DR) by aggregators managing consumers’ loads in smart and connected communities (households, businesses, industries and aggregation of electric vehicle batteries). However, practitioners and researchers alike have expressed the fear that dynamic pricing may cause …

Embedded Fault Class Detection Methodology For Condition-Based Machine Monitoring And Predictive Maintenance, Nagdev Amruthnath

Dissertations

Ever since the Second Industrial Revolution, manufacturing firms have continuously been working on minimizing the inefficiencies and maximizing the productivity of their system. This objective led to the creation of the Toyota Production System which follows the motto of “making [the] highest quality products at the least cost in the shortest lead time. (Ohno, 1988)” This philosophy is widely recognized and is utilized by various industries today.

Currently, we are going through the Fourth Industrial Revolution (also called, Industry 4.0) where internet technologies are utilized to additionally maximize the productivity in the production processes. Process synchronization is one of the …

Optimization Of Automated Guided Vehicles (Agv) Fleet Size With Incorporation Of Battery Management, Ahmed Hamdy

Engineering Management & Systems Engineering Theses & Dissertations

An important aspect in manufacturing automation is material handling. To facilitate material handling, automated transport systems are implemented and employed. The AGV (automated guided vehicle) has become widely used for internal and external transport of materials. A critical aspect in the use of AGVs is determining the number of vehicles required for the system to meet the material handling requirements.

Several models and simulations have been applied to determine the fleet size. Most of these models and simulations do not incorporate the battery usage of the vehicles and the effect it can have on the throughput and the number of …