Engineering Commons^™

Parametric Study On A Novel Waste Heat Recovery System, Ghaleb Rustom Abdul Sater

Electronic Thesis and Dissertation Repository

The present thesis is based on an industry-sponsor project involving a novel waste heat-to-electricity conversion system. This proprietary system utilizes thermal energy from a low temperature heat sources to produce torque that drives an electric generator to produce electricity. The system needs to be studied through scientific research to help with optimizing the product development, component design, and overall system performance. The main objectives of this study are to develop simulation tools (numerical model) that will allow to simulate the thermo-fluid processes in various system components and to use this numerical model to study the heat transfer and phase-change processes …

Impact Of Bioparticle Recirculation In A Circulating Fluidized Bed Biofilm Reactor On Simultaneous Organic And Nitrogen Removal, Ming Li

Electronic Thesis and Dissertation Repository

The Circulating Fluidized Bed Biofilm Reactor (CFBBR), a bioparticle technology designed for biological nutrient removal, has been implemented to achieve considerable biodegradation efficiency and low sludge production, compared with activated sludge system and typical biofilm technology. The inherent advantages of bioparticle technology are enhanced substantially by the CFBBR, for example, decoupling of hydraulic retention time (HRT) from solids retention time (SRT), large specific surface area, ideal conditions for biofilm ecosystem.

In this work, bioparticle recirculation, as a novel control method for bioparticle system, was demonstrated in CFBBRs. To verify the impact of bioparticle recirculation on the reactor performance, bio-kinetics and …

Optimal Inertial Sensor Placement And Motion Detection For Epileptic Seizure Patient Monitoring, Babak Kamalizonouzi

Electronic Thesis and Dissertation Repository

Use of inertial sensory systems to monitor and detect seizure episodes in patients suffering from epilepsy is investigated via numerical simulations and experiments. Numerical simulations employ a mathematical model that is able to predict human body dynamic responses during a typical epileptic seizure. An optimized inertial sensor placement procedure is developed to address achievement of highest possible sensing resolution in determining angular accelerations with minimal errors. In addition, a joint torque estimation procedure is formulated to assist in the future development of a possible detection scheme. Experimental motion data obtained from an epileptic seizure patient as well as a healthy …

Photocalytic Degradation Of Malic Acid Under Thin Coated Tio2, Vanessa Silveira Rodgher

Electronic Thesis and Dissertation Repository

Opaque fluids have a limited irradiation transmission. Thus, their decontamination employing near UV irradiation poses significant technical challenges. In the present study, a thin UV-transparent/waterproof glue layer coated with a 1.5 wt% of TiO₂ and a new PhotoReactor Cell were implemented. TiO₂ irradiation in the PhotoReactor Cell was effected on the TiO₂ particle side, not directly in contact with the fluid, allowing the postulation of an “h⁺” site mobility mechanism on photocatalysis.

Photocatalytic degradation experiments with malic and malonic acid in water at 10, 20, 30 and 40 ppm showed the complete degradation of malic …

Reliability Techniques For Data Communication And Storage In Fpga-Based Circuits, Yubo Li

Theses and Dissertations

This dissertation studies the effects of radiation-induced single-event upsets (SEUs) on field-programmable gate array(FPGA)-based circuits. It analyzes and quantifies a special case in data communication, that is, the synchronization issue of signals when they are sent across clock domains in triple modular redundancy (TMR) circuits with the presence of SEUs. After demonstrating that synchronizing errors cannot be eliminated in such case, this dissertation continues to present novel synchronizer designs that can guarantee reliable synchronization of triplicated signals. Fault injection tests then show that the proposed synchronizers provide between 6 and 10 orders of magnitude longer mean time to failure (MTTF) …

Passive And Semi-Active Structure-Multiple Tuned Liquid Damper Systems, Islam Soliman

Electronic Thesis and Dissertation Repository

The resonant vibration motion of tall buildings due to dynamic loading, such as wind storms and earthquakes, can be reduced by adding passive dynamic vibration absorbers (DVAs). A single sway mode of vibration is usually considered, however, for certain structures, multiple modes may need to be suppressed. Furthermore, the location of the TLD on the floor plate is important for certain modes, such as the torsional mode. As a result, a three dimensional finite element structure-TLD system model capable of dynamically analyzing a 3D structure is developed and validated. Two different nonlinear TLD models are considered. A full dynamic analysis …

Development Of A Compact Piezoworm Actuator For Mr Guided Medical Procedures, Khaled El Bannan

Electronic Thesis and Dissertation Repository

In this research, a novel piezoelectric actuator was developed to operate safely inside the magnetic resonance imaging (MRI) machine. The actuator based on novel design that generates linear and rotary motion simultaneously for higher needle insertion accuracy. One of the research main objectives is to aid in the selection of suitable materials for actuators used in this challenging environment. Usually only nonmagnetic materials are used in this extremely high magnetic environment. These materials are classified as MRI compatible materials and are selected to avoid hazardous conditions and image quality degradation. But unfortunately many inert materials to the magnetic field do …

The Near Wake Of A European Starling, Adam J. Kirchhefer

Electronic Thesis and Dissertation Repository

The wake of a freely flying European starling (Sturnus vulgaris) was measured using high speed, time-resolved, particle image velocimetry, simultaneously with high speed cameras which imaged the bird. These measurements have been used to generate vector maps in the near wake that can be associated with the bird’s location and wing configuration. A kinematic analysis has been performed on select sequences of measurements to characterize the motion of the bird, as well as provide a point of comparison between the bird of the present study and other birds or flapping wings. Time series of measurements have been expressed …

The Effects Of Freestream Turbulence On Serpentine Diffuser Distortion Patterns, Jesse Scott Johnson

Theses and Dissertations

Serpentine diffusers have become a common feature in modern aircraft as they allow for certain benefits that are impossible with a traditional linear configuration. With the benefits, however, come certain disadvantages, namely flow distortions that reduce engine efficiency and decrease engine surge stability margins. These distortions are now being researched comprehensively to determine solutions for mitigating the adverse effects associated with them. This study investigates how varying the freestream turbulence intensity of the flow entering a serpentine diffuser affects the distortion patterns that are produced by the diffuser. Experiments were performed with a model serpentine diffuser on the Annular Cascade …

Production Of Bio-Coal And Activated Carbon From Biomass, Diana C. Cruz

Electronic Thesis and Dissertation Repository

The slow pyrolysis of different biomasses (maple wood, birch bark, switch grass, coffee pulp and corn stalk) was studied with the aim to produce a solid pyrolysis product (bio-coal) with promising properties and potential for use in traditional fossil-coal applications. Batch pyrolysis experiments were conducted in a Mechanically Fluidized Reactor (MFR) at temperatures ranging from 143 to 665 ^oC, which includes the torrefaction temperature range (200-300 ^oC). The effects of temperature and holding time on bio-coal mass yields were determined. The bio-coals were characterized in detail and a highly-controlled study on bio-coal hygroscopicity is presented. Optimal conditions for …

Fractional Condensation Of Bio-Oil Vapors, Akhil Tumbalam Gooty

Electronic Thesis and Dissertation Repository

The research project described in this thesis deals with an investigation on the fractional condensation of bio-oil vapors to improve the separation of some of the key components of the bio-oil and, consequently, improve the properties and the value of each of the separated product streams.

In the first part, the separation of a mixture of three model compounds of bio-oil from a vapor and carrier gas stream was investigated with the help of a series of three condensers maintained at different temperatures. The practical performance of the fractional condensation train was improved by comparing the experimental results with the …

Experimental Investigation Of The Fluid Temperature Field And The Thermal Performance Of Insert Devices In A Flat-Plate Solar Collector, Gurveer Singh Sandhu

Electronic Thesis and Dissertation Repository

An experimental study on the thermal flow behavior inside a flat-plate collector and the impact of insert devices (passive heat transfer enhancement techniques) on the thermal performance of the collector is presented. Temperature fields were obtained for different Reynolds numbers (250-650) and at different inclination angles of the collector. The results show that a stratified flow is developed inside the collector and the warmer fluid restricts itself to the upper portion of the collector only. Various new configurations of the conventional insert devices were tested over a wide range of Reynolds number (200-8000). Comparison of these devices show that in …

Topographic Influences On Trends And Cycles In Nutrient Export From Forested Catchments On The Precambrian Shield, Samson G. Mengistu

Electronic Thesis and Dissertation Repository

This dissertation explored topographic controls on spatial and temporal patterns in water yield and nutrient (carbon, nitrogen and phosphorus) export from forested headwater catchments in the Turkey Lakes Watershed in central Ontario, where other factors contributing to differences in water yield and nutrient export, including climate, geology, forest, and soils, are relatively constant. Topographic characteristics, including (a) hydrological flushing potential (expansion of water table into nitrate-N producing areas); (b) hydrological storage potential (area of wetlands, which can alternatively allow water and nutrients to bypass wetlands when storage capacity is filled with water or to trap them when not filled); and …

Investigation Of Possible Novel Peptide Inhibitors To Bag-1 Based On Peptidyl-Biomimetics, Jonathan Brunn

Theses and Dissertations

In this Master’s Thesis Research the results can be summarized from two major tasks: (1) In our first task, we utilized our two protein system (BAG-1 and HSP 70) as part of beta testing of a computational software 1 that can take three dimensional x-ray crystallography information about protein complexes and predict the strength of atom –atom interactions between amino-acid residues Open Contact predicts binding hotspots that can be used to identify short amino acid chains or peptides that mimic that particular binding segment of the larger protein. These peptides are called pepidyl-biomimetics. The peptide can potentially act as an …

Best Practices Using Building Information Modeling In Commercial Construction, Simon Beveridge

Theses and Dissertations

There has been an increase in adoption of building information modeling (BIM) by commercial contractors over the past few years but there is not a clear indication of current application or the frequency of each use. This research was undertaken to determine the frequency and best practices of using BIM in commercial construction. Leading commercial contracting firms were contacted and employees were selected to complete a telephone survey that was designed to determine how they are using BIM. It was found that BIM is being used with more frequency on projects, with plans to continue to implement it even further …

Streamlined Extract Preparation For E. Coli-Based Cell-Free Protein Synthesis And Rapid Site-Specific Incorporation Of Unnatural Amino Acids In Proteins, Prashanta Shrestha

Theses and Dissertations

This thesis reports the viability of E. coli cell extracts prepared using equipment that is both common to biotechnology laboratories and able to process small volume samples and expression of proteins containing unnatural amino acids (UAAs) at higher level using PCR amplified linear DNA templates (LETs) in cell-free protein synthesis (CFPS) system. E. coli-based cell extracts are a vital component of inexpensive and high-yielding CFPS reactions. However, effective preparation of E. coli cell extract is limited to high-pressure homogenizers (French press style or impinge-style) or bead mill homogenizers, which all require a significant capital investment. This work specifically assessed the …

Liquid-Liquid Equilibrium Of Biodiesel Components, Joseph C. Bell

Theses and Dissertations

Biodiesel is produced from vegetable oils through transesterification. Triglyceride mixtures extracted from oilseed feedstocks are upgraded by reaction with an alcohol in the presence of a catalyst to produce fatty acid esters. This reaction produces a mixture of esters, glycerin, alcohol, and catalyst. Separation of the fatty acid esters (biodiesel) and glycerin can be accomplished through liquid-liquid extraction by water addition. Designing liquid-liquid extraction with water as the solvent requires ternary liquid-liquid equilibrium data for mixtures of water, glycerin, and fatty acid esters. Ternary mixture LLE data have been experimentally measured for several of these systems. Those measured include mixtures …

Efficient Estimation For Small Multi-Rotor Air Vehicles Operating In Unknown, Indoor Environments, John Charles Macdonald

Theses and Dissertations

In this dissertation we present advances in developing an autonomous air vehicle capable of navigating through unknown, indoor environments. The problem imposes stringent limits on the computational power available onboard the vehicle, but the environment necessitates using 3D sensors such as stereo or RGB-D cameras whose data requires significant processing. We address the problem by proposing and developing key elements of a relative navigation scheme that moves as many processing tasks as possible out of the time-critical functions needed to maintain flight. We present in Chapter 2 analysis and results for an improved multirotor helicopter state estimator. The filter generates …

Vibrotactile Feedback Generation Using Envelope Waveforms And Eccentric-Mass Motors, Michael G. Plooster

Theses and Dissertations

The usefulness of vibrotactile feedback as a channel to communicate information has been widely recognized. However, most of the recent work on this subject uses actuators that are either too expensive or too large for many practical applications. This thesis explores the generation of vibrotacatile feedback patterns using a simple, inexpensive eccentric-mass motor that is constrained to use a constant voltage and a low on/off switching frequency. In particular, it explores the pulse timing method, which utilizes the slow transient response of the eccentric-mass motor to calculate pulse and rest times for an arbitrary envelope waveform shape. Several hardware tests …

Wireless Telemetry System For Implantable Sensors, Kyle G. Fricke

Electronic Thesis and Dissertation Repository

Advanced testing of medical treatments involves experimentation on small laboratory animals, such as genetically modified mice. These subjects are used to help researchers develop medication and cures for humans. To understand the effects of the treatments, innovative telemetry systems are developed, that enable remote real-time cardiac monitoring. The latest research in the field of cardiac monitoring has revealed two major limitations with wireless implantable systems: a) the current size of implantable electronics limits the physical size of the system to larger subjects; and b) the systems only interface with one sensor type (e.g., pressure sensor only). This research focuses on …

Two-Refinement By Pillowing For Structured Hexahedral Meshes, J. Bruce Malone

Theses and Dissertations

A number of methods for adaptation of existing all-hexahedral grids by localized refinement have been developed; however, none ideally fit all refinement needs. This thesis presents the structure to a method of two-refinement developed for conformal, structured, all-hexahedral grids that offers flexibility beyond what has been offered to date. The method is fundamentally based on pillowing pairs of sheets of hexes. This thesis also suggests an implementation of the method, shows the results of examples refined using it and compares these results to results from implementing three-refinement on the same examples.

Internal Wave Generation Over Rough, Sloped Topography: An Experimental Study, Lauren Elizabeth Eberly

Theses and Dissertations

Internal waves exist everywhere in stratified fluids - fluids whose density changes with depth. The two largest bodies of stratified fluid are the atmosphere and ocean. Internal waves are generated from a variety of mechanisms. One common mechanism is wind forcing over repeated sinusoidal topography, like a series of hills. When modeling these waves, linear theory has been employed due to its ease and low computational cost. However, recent research has shown that non-linear effects, such as boundary layer separation, may have a dramatic impact on wave generation. This research has consisted of experimentation on sloped, sinusoidal hills. As of …

Comparison Of 3-D Friction Stir Welding Viscoplastic Finite Element Model With Weld Data And Physically-Simulated Data, Maria Posada

Theses and Dissertations

Models (both physical and numerical) of the friction stir (FS) welding process are used to develop a greater understanding of the influence of independent process parameters on dependent process output variables, such as torque, power, specific weld energy, peak temperature, cooling rates and various metallurgical factors (e.g., grain size and precipitates). An understanding of how the independent process parameters influence output variables and ultimately their effect on resultant properties (e.g., strength, hardness, etc..) is desirable. Most models developed have been validated primarily for aluminum alloys with relatively small amounts of experimental data. Fewer models have been validated for steels or …

Development And Evaluation Of A Real-Time Framework For A Portable Assistive Hearing Device, Aleksandar Dimitrov Mihaylov

Electronic Thesis and Dissertation Repository

Testing and verification of digital hearing aid devices, and the embedded software and algorithms can prove to be a challenging task especially taking into account time-to-market considerations. This thesis describes a PC based, real-time, highly configurable framework for the evaluation of audio algorithms. Implementation of audio processing algorithms on such a platform can provide hearing aid designers and manufacturers the ability to test new and existing processing techniques and collect data about their performance in real-life situations, and without the need to develop a prototype device. The platform is based on the Eurotech Catalyst development kit and the Fedora Linux …

Wind Field Measurements Around Photovoltaic Panel Arrays Mounted On Large Flat-Roofs, R Nicolas Pratt

Electronic Thesis and Dissertation Repository

An investigation of the wind field around roof-mounted PV arrays has been undertaken, utilizing synchronized TR-PIV and pressure measurements, in order to better understand the mechanisms which result in the aerodynamic loads, most importantly uplift, which act on such arrays. The mean flow is not significantly altered above the array as compared to a bare roof, while Reynolds normal and shear stresses are markedly reduced. Increasing the tilt angle of the array results in a progression from uplifts driven by vortex induced suction, which cause peak uplifts on a bare roof, towards uplifts which are driven primarily by local flow …

Predicting The Wear Of High Speed Rocket Sleds, Lauren B. Wuertemberger

Theses and Dissertations

Holloman Air Force Base houses the 10 mile long Holloman High Speed Test Track (HHSTT) in New Mexico and can run hypersonic experiments at speeds up to 10,000m/s. Tested objects are loaded onto sleds, which are connected to the track by slippers that slide along the rails. The payload sled is propelled down the track by a series of rocket sleds. The ability to predict the wear that will occur on the slippers during these experiments is important for slipper design and preventing catastrophic failure. However, high speeds complicate wear prediction as there additional contributing factors, including inconsistent surface contact, …

Model Development And Application Of Molecular Simulations For The Study Of Proton Transport In Bulk Water And For The Prediction Of Dipole Moments Of Organic Compounds, Abhishek Asthana

Theses and Dissertations

The present work demonstrates the application of molecular simulations (MD) in two different areas: proton transport in bulk water and estimation of the dipole moment of polar organic compounds. In both areas, relatively few successful and robust methodologies exist. In the first part, a new polarizable water model is developed for MD simulations of the proton transport process. The model was parametrized from a combination of quantum chemical calculations and experimental water properties. The model was implemented in MD simulation studies of liquid water at room temperature, as well as with excess protons. For pure water the model gave good …

Controlled Synthesis Of One Dimensional Nanostructured Materials And Their Applications As Catalyst Supports In Proton Exchange Membrane Fuel Cells, Mohammad Norouzi Banis

Electronic Thesis and Dissertation Repository

Nanomaterials have attracted significant interest in the past decade due to their unique structure and properties compared to their bulk counterparts. Nanomaterials-based solutions can address challenges in various technologies such as proton exchange membrane fuel cells (PEMFCs). PEMFC is an innovative energy conversion technology to directly convert chemical energy to electrical energy by using hydrogen as fuel. However, the current PEMFC system still faces significant technological roadblocks which have to be overcome before the system can become economically viable. A major impediment to the commercialization of PEMFC is the high cost of materials and manufacturing and stability, which is primarily …

Seismic Response Of Stiffening Elastic Systems, Andrew Scott Morgan

Theses and Dissertations

Traditional seismic load resisting systems in buildings are designed to undergo inelastic deformations in order to dissipate energy, resulting in residual displacements. This work explores an approach to eliminate these residual displacements. The systems investigated have low initial stiffness which increases at a predefined displacement, and are therefore called stiffening elastic systems. This thesis begins with an examination of single-degree-of-freedom stiffening elastic systems. A case study is presented which suggests that the benefits from stiffening elastic behavior may be limited to systems which would have long periods if designed traditionally. A thorough parameter study is also presented which indicates the …

Effective Collaboration Through Multi User Cax By Implementing New Methods Of Product Specification And Management, Vonn L. Holyoak

Theses and Dissertations

This thesis presents a new design process in which design specifications and task distribution are determined from a parallel multi user prospective. Using this method, projects are more easily decomposed into tasks that can be performed concurrently, thus decreasing the design time. Also, a framework is provided to determine the correct distribution of available talent and stakeholders that can be utilized on a given project. The research suggests that by involving the necessary stakeholders in a multi user setting, changes can be made quickly and without additional approval wait time. By including individuals from the various areas of required talent, …