Engineering Commons^™

Quantum Dot Deposition Into Pdms And Application Onto A Solar Cell, Christopher Marcus Botros, Richard N. Savage

Master's Theses

Research to increase the efficiency of conventional solar cells is constantly underway. The goal of this work is to increase the efficiency of conventional solar cells by incorporating quantum dot (QD) nanoparticles in the absorption mechanism. The strategy is to have the QDs absorb UV and fluoresce photons in the visible region that are more readily absorbed by the cells. The outcome is that the cells have more visible photons to absorb and have increased power output. The QDs, having a CdSe core and a ZnS shell, were applied to the solar cells as follows. First, the QDs were synthesized …

Material Behavior Characterization Of A Thin Film Polymer Used In Lithium-Ion Batteries, Michael James Martinsen

Theses and Dissertations

The use of lithium-ion batteries in the automotive industry has become increasingly popular. As more hybrid and electric vehicles take to the road an understanding of how these batteries will behave structurally will be of greater concern. Impact testing can give a valuable overview of the strengths and weaknesses of a battery's design, however, these tests can be time consuming, expensive, and dangerous. Finite element analysis can deliver a reliable low cost approximation of physical testing results. The accuracy of FE results depends greatly on the mathematical representation of the material properties of Li-ion battery components. In this study, the …

Analysis Of Multi-Directional Recycled Jute Fiber Composite Behavior Using Experimental, Numerical, And Analytical Methods, Patrick Severson

Theses and Dissertations

Composite materials are increasing in popularity as a material of choice in many engineering applications. Major industries using composites include automotive, construction, and sports equipment. Most of the knowledge, research, and technology that will help decrease the cost of composite materials have been aimed at developing synthetic fibers as the reinforcing constituent.

This thesis characterizes jute fibers obtained as a byproduct from the coffee industry to determine if they can be viable in composite manufacturing. Experimental analysis, finite element analysis, and analytical modeling are used to characterize jute fiber based composites. Experimental analysis consists of jute fiber bundle tensile testing …

Product Display Versus Graphical Representation On Packaging, Joshua Galvarino

All Theses

ABSTRACT
Previous research conducted (Hurley, et al., 2012) concerning physical and graphical product visibility from the primary display panel (PDP) is limited to one product category. This research expands previous peer-reviewed research, which indicates that there is a significant difference between consumer preferences of graphical display vs. physical product display on packaging.
The shelf presence of packages showing actual product visibility versus packages showing only a graphical representation of the product was evaluated. Both shopping results and quantitative data using eye-tracking technology were collected and cross-referenced with a qualitative, post-experiment survey.
Specifically, variables of packaging within pasta, snacks, prepared frozen …

Validation Of Weak Form Thermal Analysis Algorithms Supporting Thermal Signature Generation, Elton Lewis Freeman

Masters Theses

Extremization of a weak form for the continuum energy conservation principle differential equation naturally implements fluid convection and radiation as flux Robin boundary conditions associated with unsteady heat transfer. Combining a spatial semi-discretization via finite element trial space basis functions with time-accurate integration generates a totally node-based algebraic statement for computing. Closure for gray body radiation is a newly derived node-based radiosity formulation generating piecewise discontinuous solutions, while that for natural-forced-mixed convection heat transfer is extracted from the literature. Algorithm performance, mathematically predicted by asymptotic convergence theory, is subsequently validated with data obtained in 24 hour diurnal field experiments for …

Calcium Phosphate-Based Resorbable Biomaterials For Bone Regeneration, Daniel O. Costa

Electronic Thesis and Dissertation Repository

Bone defects are a prevalent problem in orthopedics and dentistry. Calcium phosphate-based coatings and nanocomposites offer unique solutions towards producing scaffolds with suitable physical, mechanical and biological properties for bone regeneration.

We developed a novel method to synthesize hydroxyapatite (HA) particles with high aspect ratio using sol-gel chemistry and hydrothermal treatment. We obtained tunable pure-phase carbonated-HA in the form of micro/nanorods and nanowires (diameters 25-800 nm). To mimic the structure of bone, HA nanowires were homogenously mixed within poly(ε-caprolactone) (PCL) to produce nanocomposites with improved mechanical properties as determined by uniaxial tensile testing.

Surface chemistry and topography of biomaterials play …

Development Of A Novel Handheld Device For Active Compensation Of Physiological Tremor, Abhijit Saxena

Electronic Thesis and Dissertation Repository

In microsurgery, the human hand imposes certain limitations in accurately positioning the tip of a device such as scalpel. Any errors in the motion of the hand make microsurgical procedures difficult and involuntary motions such as hand tremors can make some procedures significantly difficult to perform. This is particularly true in the case of vitreoretinal microsurgery. The most familiar source of involuntary motion is physiological tremor. Real-time compensation of tremor is, therefore, necessary to assist surgeons to precisely position and manipulate the tool-tip to accurately perform a microsurgery. In this thesis, a novel handheld device (AID) is described for compensation …

Biaxial Bending And Lateral-Torsional Instability Of Imperfect Frp I-Beams Including Effects Of Retrofitting, Jodi Marie Knorowski

Civil & Environmental Engineering Theses & Dissertations

This thesis presents the outcome of a theoretical and experimental study of the behavior of Fiber Reinforced Polymer (FRP) I-beams susceptible to lateral-torsional instability or when subjected to biaxial bending. Laboratory experiments involved application of vertical and horizontal static loads to a 4 x 4 x ¼ in. I-beam with various lengths, and the resulting displacement, twist, and strain were recorded. In the vertical direction, the beam was loaded from different reference load heights with respect to the shear center of the beam. The governing biaxial flexure and torsion differential equations were modified to account for the presence of initial …

Friction Stir Spot Welding Of Ultra-High Strength Steel, Trent J. Hartman

Theses and Dissertations

Friction stir spot welding (FSSW) is quickly becoming a method of interest for welding of high strength steel (HSS) and ultra high strength steel (UHSS). FSSW has been shown to produce high quality welds in these materials, without the drawbacks associated with fusion welding. Tool grade for polycrystalline cubic boron nitride (PCBN) tools has a significant impact on wear resistance, weld quality, and tool failure in FSSW of DP 980 steel sheet. More specifically, for a nominal composition of 90% CBN, the grain size has a significant impact on the wear resistance of the tool. A-type tools performed the best, …

Measurement Of Power-Law Creep Parameters By Instrumented Indentation Methods, Caijun Su

Doctoral Dissertations

New experimental methods have been developed to measure the uniaxial power-law creep parameters α [alpha] and n in the relation έ[epsilon dot]=α[alpha]σⁿ[sigma] (έ [epsilon dot] is the creep strain rate and σ [sigma] is the creep stress) from the load, time, displacement and stiffness data recorded during an instrumented indentation experiment performed with a conical or pyramidal indenter. The methods are based on an analysis of Bower et al., which relates the indentation creep rate to the uniaxial creep parameters based on simple assumptions about the constitutive behavior (Bower et al., 1993 …

Development And Characterization Of Shellac-Hydroxypropyl Methyl Cellulose Composite Films With Acid Catalyst, Sana Asrar

All Theses

The objective of this research was to develop a shellac-hydroproyl methyl cellulose (Sh-HPMC) composite film with enhanced water vapor barrier. Citric acid (CA) was used as an acid catalyst, to promote miscibility between HPMC and shellac. In a preliminary test, three different concentrations of CA (1000:1, 200:1, 100:1) were tested to identify the best Sh:CA ratio. Based on the Water vapor permeability properties and mechanical properties, Sh-CA (1000:1 ratio) had the most enhanced water vapor barrier and the lowest reduction in tensile strength compared to the pure HPMC film (control). In the later part of the research, the effect of …

Determining The Proper Point Size For Display Type On Packaging, Joanna Fischer

All Theses

Through the use of a preference test, the proper point size of display text on a package was evaluated in relation to a package's proportions. The test involved the examination of packaging images displaying the product or brand name in various point sizes by 150 participants who were then asked to choose the option they most preferred. The participants were then provided with a post-survey intended to gather additional information regarding potential preference motives.
The primary purpose of this study was to determine the most preferred display type size of a package based on its relationship with the package's proportions. …

The Effect Of Food Ingredients On The Oxygen Barrier Properties Of Retort Materials, Amanda Ward

All Theses

An unexplored area in research is addressing how retorted food ingredients interact with retort packaging's oxygen barrier. Ten common food ingredients (whey protein isolate, soy protein isolate, bovine gelatin, fish gelatin, high molecular weight fish gelatin, water, air, oil, potato starch, and hydroxypropyl methylcellulose) were assessed to find their effect on the barrier properties of CPP, PET, and high barrier commercial retort pouches. OxySense Gen III 300 and Mocon OxTran 2/21 were used to evaluate the samples. CPP pouches were first assessed with the OxTran 2/21 and indicated that treatments affected the OTR's of the film materials. However, results from …

Relating Burst Pressure To Seal Peel Strength In Pouches, William Bernal

All Theses

This work was aimed at studying the relationship between burst pressure and seal peel strength. Past researchers developed a force balance equation based on the analysis of a force diagram to relate burst pressure to seal strength. The theoretical formula S=P(D/2) (S=Seal Strength, P=Burst Pressure, D=Restraining Plate Gap) has been studied by past researchers with contrasting results.
The theoretical formula was tested by varying dwell time to produce seals of varying strength. Pouches were burst tested at each of these dwell times to obtain burst pressures, burst peeling times, and burst locations. Corresponding peel tests were performed with crosshead speeds …

A Resistance Based Structural Health Monitoring System For Composite Structure Applications, Dennis N. Boettcher

Master's Theses

This research effort explored the possibility of using interwoven conductive and nonconductive fibers in a composite laminate for structural health monitoring (SHM). Traditional SHM systems utilize fiber optics, piezoelectrics, or detect defects by nondestructive test methods by use of sonar graphs or x-rays. However, these approaches are often expensive, time consuming and complicated.

The primary objective of this research was to apply a resistance based method of structural health monitoring to a composite structure to determine structural integrity and presence of defects.

The conductive properties of fiber such as carbon, copper, or constantan - a copper-nickel alloy - can be …

Dynamical Properties Of Ferroelectric Perovskites (Ba,Sr)Tio3 And Pb(Zr,Ti)O3 Systems From First Principles, Jeevaka Weerasinghe

Graduate Theses and Dissertations

A first-principles-based effective Hamiltonian scheme which incorporates coupling between ferroelectric (FE) and antiferrodistortive (AFD) motions is applied to Pb(Zr,Ti)O₃ alloys. It validates the existence of two modes of E symmetry (rather than the single E(1TO) soft mode) in the 50-75 cm^-1 range for temperatures smaller than 200 K and for compositions falling within the Rhombohedral R3c phase. Coupling between long-range-ordered FE and AFD motions is shown to be the cause of the additional mode and more insight into its nature is provided. This scheme is further used to reveal a field-induced anticrossing involving FE and AFD degrees of …

Design, Fabrication And Testing Of Tunable Rf Meta-Atoms, Derrick Langley

Theses and Dissertations

Metamaterials are engineered structures designed to alter the propagation of electromagnetic waves incident upon the structure. The focus of this research was the effect of metamaterials on electromagnetic signals at radio frequencies. RF meta-atoms were investigated to further develop the theory, modeling, design and fabrication of metamaterials. Comparing the analytic modeling and experimental testing, the results provide a deeper understanding into metamaterials which could lead to applications for beam steering, invisibility cloaking, negative refraction, super lenses, and hyper lenses. RF meta-atoms integrated with microelectromechanical systems produce tunable meta-atoms in the 10 - 15 GHz and 1 - 4 GHz frequency …

Finite Element Modeling Of Ballistic Impact On A Glass Fiber Composite Armor, Dan M. Davis

Master's Theses

Finite Element Modeling of Ballistic Impact on a Glass Fiber Composite Armor

Dan Davis

Experiments measuring the ballistic performance of a commercially available fiberglass armor plate were used to guide the development of constitutive laws for a finite element model of the impact. The test samples are commercially available armor panels, made from E-glass fiber reinforced polyester rated to NIJ level III. Quasi-static tensile tests were used to establish material properties of the test panels. These properties were then used to create models in the explicit finite element code LSDYNA.

Ballistic impact testing of the panels was conducted using a …

Correlation Of Shear Strength Between Longitudial And Transverse Specimens, Erasto A. Fernandez

University of New Orleans Theses and Dissertations

In this thesis, new methods for shear strength are proposed and backed up through extensive experimentation, ABAQUS models and data analysis of Titanium welds of three different alloys. The results are compared with those obtained by using the procedure outlined by AWS B4 for calculating Shear Strength in the transverse and longitudinal directions; this equation is widely used by the American Welding Society (AWS) and all those in search of more efficient designs involving welding.

It is a well-documented issue that the equation provided by AWS yields a large discrepancy between the values for shear strength of longitudinal and transverse …

Laboratory And Field Evaluation Of Two Warm-Mix Additives In Connecticut And Validation Of An Alternative Moisture Susceptibility Test, Alexander K. Bernier

Master's Theses

The first official state Warm-Mix Asphalt (WMA) pavement project in Connecticut was constructed between July 20th and 22nd, 2010 and it involved three experimental sections, i.e. one section with a conventional HMA (control section) and two WMA sections with different technologies, wax and foamed asphalt. All three sections are located on Route 70 in central Connecticut. The materials were collected in loose form and reheated and compacted in laboratory conditions (laboratory fabricated specimens). This paper discusses the effect of mix type on the results from several tests conducted in the laboratory, such as Semi-Circular Bending, Hamburg Wheel Tracking, Indirect Tensile, …

Molecular Dynamics Study Of Diffusion Of O2 Penetrates In Uncrosslinked Polydimethysiloxane (Pdms), Crosslinked Pdms, And Pdms-Based Nanocomposites, Varun Ullal

Graduate Theses and Dissertations

Molecular dynamics simulations are used to study diffusion of O₂ molecules in pure polydimethysiloxane (PDMS), crosslinked PDMS, and PDMS-based nanocomposites. The PDMS chains and penetrates are modeled using a hybrid interatomic potential which treats the Si-O atoms along the chain backbone explicitly while coarse-graining the methyl side groups and penetrates. By tracking the diffusion of penetrates in the system and subsequently computing their mean-squared displacement, diffusion coefficients are obtained. In pure PDMS models of varying molecular weight, diffusivity of the O₂2 penetrates is found to have an inverse relationship with chain length. Simulation models with longer chains …

The Effect Of Full Body Versus Partial Body Graphic Labeling On Beverage Packaging, Toni Gomes

All Theses

Through the collection of quantitative and qualitative data, the shelf presence of
full body graphic labels versus partial body graphic labels on plastic beverage bottles was
examined and evaluated. Eye tracking was used to collect phenomenological data atop
the stimuli, while a shopping checklist was used to collect purchase preference. A postexperiment
survey was also conducted in order to gather qualitative data regarding
possible purchase influences.
The experiment was a 2 (label size) x 6 (beverage flavor) x 2 (age group) study,
conducted with 28 participants in a consumer retail environment using mobile eye
tracking technology. The goal of this …

Statistical Analysis Of The Stress-Energy Methodology Applied To Cushion Curve Determination, Kendalyn Paulin

All Theses

The stress-energy method is a proposed enhancement to ASTM D1596 that reduces all drop height, thickness and static load combinations into a single equation that can be used to generate any reasonable cushion curve for a particular material. There remains a question as to how accurate the stress-energy method can predict acceleration values and whether it is statistically comparable to ASTM D1596. There are three phases to this research that attempt to determine the accuracy of the stress-energy method: gathering data using the stress-energy method and analyzing the goodness of fit of the stress-energy equation, predicting a cushion curve and …

A Gps-Based Mobility Power Model For Military Vehicle Applications, George William Bozdech

Masters Theses

In recent years, military vehicles have been equipped with hybrid, diesel-electric drives to improve fuel efficiency and stealth capabilities. These vehicles require an accurate estimate of the power duty cycles during distinct operating conditions. To meet this demand, a GPS-based mobility power and duty cycle analysis is one approach to predict the power requirements of on-road and off-road vehicles. The dynamic vehicle parameters needed to estimate the forces developed during locomotion are determined from the GPS tracking data, and these forces include the following: the motion resistance, gravitational, linear inertia, rotational inertia, and aerodynamic drag. The motion resistance force generated …

Shock And Vibration Isolation System For Ambulatory And Litter Patients In Ground And Air Medical Transport, Mohamad R. Hachem

UNLV Theses, Dissertations, Professional Papers, and Capstones

This project explored the effectiveness of seat and litter air bladder technologies in reducing patient exposure to whole body shock and vibration during ground borne and airborne medical transport. Several seat and litter air bladder configurations were examined during field tests in a U.S. Army RG-33 MRAP ambulance and a U.S. Army HH-60M Black Hawk helicopter. The MRAP field tests were conducted at Ft. Detrick, Maryland. The Black Hawk field tests were conducted at Ft. Rucker, Alabama.

During the field tests, tri-axial vibration signals were recorded on a 16-channel CoCo90 Data Logger/Frequency Analyzer and then post processed in the laboratory …

A High Bandwidth Non-Destructive Method For Characterizing Simple Media, Matthew L. Szuster

Theses and Dissertations

The relative complex permittivity can be extracted with time domain data from a perfect electrical conductor (PEC) backed sample of a low-loss, non-dispersive dielectric using dual ridged waveguide aperture probes with attached PEC flange plates of the same geometry and different dimensions. The temporal domain measurement of interest is the ability to detect the reflection from the edge of the flange plate in the parallel region created by the flange plate and the PEC backing on the dielectric sample. Signal processing windows are applied to the data in order to exploit this edge reflection. The types of signal processing methods …

Silicon Carbide Capacitive High Temperature Mems Strain Transducer, Richard P. Weisenberger

Theses and Dissertations

Air Force Research Lab Air Vehicles directorate performs research on hypersonic vehicles. To verify materials or designs of hypersonic vehicles, they have a need to measure strain at temperatures exceeding 700°C. Strain sensors have the ability to measure strain. Strain is the deformation of materials due to internal stresses in a material. Internal stresses occur when a material is subjected to a force. Traditional strain sensors use Piezoresistive effects to measure strain, which is temperature dependent and making them unusable at high temperatures. This paper discusses a novel strain sensing device, sensing capacitance instead of piezoresistance. The strain sensor is …

High Speed Friction Stir Spot Welding On Dp 980 Steel:Joint Properties And Tool Wear, Nathan David Saunders

Theses and Dissertations

With the desire to improve passenger safety and fuel efficiency, Ultra High Strength Steels (UHSS) have been developed for use in the automotive industry. UHSS are high strength steels with high ductility and strength. DP 980 is one of these UHSS being applied in automobile manufacturing. DP 980 is difficult to join with Resistance Spot Welding (RSW) because of the high carbon content and alloying in this material. The weld becomes brittle when it solidifies during the welding process. With the desire and motivation of widely using UHSS, new welding processes are needed to be developed in order to effectively …

Effect Of External Electric Field On Hydrogen Adsorption Over Activated Carbon Separated By Dielectric Materials, Zheng Zhang

Dissertations, Master's Theses and Master's Reports - Open

Energy crisis and worldwide environmental problem make hydrogen a prospective energy carrier. However, storage and transportation of hydrogen in large quantities at small volume is currently not practical. Lots of materials and devices have been developed for storage hydrogen, but to today none is able to meet the DOE targets.

Activated carbon has been found to be a good hydrogen adsorbent due to its high surface area. However, the weak van der Waals force between hydrogen and the adsorbent has limited the adsorption capacity. Previous studies have found that enhanced adsorption can be obtained with applied electric field. Stronger interaction …

Heat Transfer In Microwave Heating, Zhiwei Peng

Dissertations, Master's Theses and Master's Reports - Open

Heat transfer is considered as one of the most critical issues for design and implement of large-scale microwave heating systems, in which improvement of the microwave absorption of materials and suppression of uneven temperature distribution are the two main objectives. The present work focuses on the analysis of heat transfer in microwave heating for achieving highly efficient microwave assisted steelmaking through the investigations on the following aspects: (1) characterization of microwave dissipation using the derived equations, (2) quantification of magnetic loss, (3) determination of microwave absorption properties of materials, (4) modeling of microwave propagation, (5) simulation of heat transfer, and …