Engineering Commons^™

Expression Of Human Protein C In Mammary Tissue Of Transgenic Mammals , William H. Velander

Department of Chemical and Biomolecular Engineering: Patents

Recombinant protein C characterized by a high percentage of active protein can be obtained in the milk of transgenic mammals that incorporate DNAs according to the present invention. Transgenic mammals of the present invention are produced by introducing into developing embryos DNA that encodes protein C, such that the DNA is stably incorporated in the DNA of germ line cells of the mature mammals and inherited in normal, mendelian fashion.

Field Measurement Of Uncontrolled Air Flow And Depressurization In Restaurants, Florida Solar Energy Center, James Cummings

FSEC Energy Research Center®

Field investigations were done in seven restaurants (subsample of a 63 commercial buildings study) to identify uncontrolled air flows and pressure imbalances. Testing included building airtightness tests, identification of building air barrier location, duct system airtightness, characterization of pressure differentials, building air flow balance, and infiltration/ventilation rates. All restaurants were found to operate at negative pressures which ranged from -0.003 inWC (-0.8 Pa) to -0.173 inWC (-43 Pa) and averaged -0.051 inWC (-12.7 Pa) under normal operation. The variables which affect depressurization are large exhaust fans, missing or undersized make-up air, intermittent outdoor air caused by the cycling of air …

Trade-Off Study And Computer Simulation For Assessing Spacecraft Pointing Accuracy And Stability Capabilities, Marcelo C. Algrain, Richard M. Powers

Department of Electrical and Computer Engineering: Faculty Publications

A case study, written in a tutorial manner, is presented where a comprehensive computer simulation is developed to determine the driving factors contributing to spacecraft pointing accuracy and stability. Models for major system components are described. Among them are spacecraft bus, attitude controller, reaction wheel assembly, star-tracker unit, inertial reference unit, and gyro drift estimators (Kalman filter). The predicted spacecraft performance is analyzed for a variety of input commands and system disturbances. The primary deterministic inputs are the desired attitude angles and rate set points. The stochastic inputs include random torque disturbances acting on the spacecraft, random gyro bias noise, …

Method For Producing Conductive Or Insulating Feedthroughs In A Substrate, Janet K. Lumpp, Susan D. Allen

Mechanical Engineering - Daytona Beach

A method for producing feedthroughs in a substrate having a front and back surface, wherein the substrate either has a hole or absorbs radiation at a given wavelength. The method includes selecting and intimately bonding a sheet to the back surface of the substrate with an adhesive which is absorptive at the given wavelength. If the substrate has a hole, an exposed area of the sheet is illuminated with laser radiation at the given wavelength and at a power level sufficient to ablate a portion of the sheet behind the exposed area, thereby creating the feedthrough in the substrate. If …

1995 Strategic Plan For Museum, Tractor Museum

Lester F. Larsen Tractor Museum: Planning and Development Documents

Roof Repair Contacting Tractor Manufacturers Inviting Donors to be Members

Tractor Test Museum Committee Minutes December 11, 1996, Tractor Museum

Lester F. Larsen Tractor Museum: Planning and Development Documents

Roof Repair Inviting Donors to be Members Treasurer's Report

Ellipsometer/Polarmeterbased Process Monitor And Control System Suitable For Simultaneous Retrofit On Molecular Beam Epitaxy System Rheed/Leed Interface System, And Method Of Use, John A. Woollam, Blaine D. Johs, Peter P. Chow

Department of Electrical and Computer Engineering: Faculty Publications

A method of, and system for applying light beam producing systems, such as ellipsometers, polarimeters, polarized light reflectance and functionally similar systems, such that a beam of light produced thereby is caused to be incident upon a process element at an angle in excess of an associated Brewster angle while enabling the production of a signal sufficiently sensitive to changes in process element parameters, for use in "real-time" process element process monitoring and control, is disclosed. In addition, a process element processing system and electron beam producing system and light beam producing system combination system is taught, wherein the electron …

Ellipsometer/Polarmeter Based Process Monitor And Control System Suitable For Simultaneous Retrofit On Molecular Beam Eptaxy System Rheed/Leed Interface System, And Method Of Use, John A. Woollam, Blaine D. Johs, Peter P. Chow

Department of Electrical and Computer Engineering: Faculty Publications

A method of, and system for, applying light beam producing systems such as ellipsometers, polarimeters, polarized light reflectance and functionally similar systems, such that a beam of light produced thereby is caused to be incident upon a process element at an angle in excess of an associated Brewster angle while enabling the production of a signal sufficiently sensitive to changes in process element parameters, for use in "real-time' process element process monitoring and control, is disclosed. In addition a process element processing system and electron beam producing system and light beam producing system combination system is taught, wherein the electronbeam …

Properties Of Schottky Contacts Of Aluminum On Strained Si1-X-YGeXCY Layers, Jian Mi, Ashawant Gupta, Cary Y. Yang

Electrical and Computer Engineering

Schottky contacts of Al/Si_1-x-yGe_xC_y were fabricated using conventional Si technology. Effects of thermal processing of the alloys on the electrical properties of the Al/Si_1-x-yGe_xC_y Schottky diodes were investigated. Current–voltage (I–V), capacitance–voltage (C–V), and x‐ray diffraction measurements were performed. These thick alloy films (100–150 nm) experienced strain relaxation upon annealing at 700 °C. Nearly ideal I–V and C–V behaviors were obtained for strain‐compensated samples. I–V and C–Vcharacteristics show evidence of dislocation‐related traps for strain‐relaxed samples. Carbon incorporation improves the I–V and C–V characteristics by lessening the extent of lattice relaxation due …

Growth Of Diamond By Rf Plasma-Assisted Chemical Vapor Deposition, Duane E. Meyer, Natale J. Ianno, John A. Woollam, A. B. Swartzlander, A. J. Nelson

Department of Electrical and Computer Engineering: Faculty Publications

A system has been designed and constructed to produce diamond particles by inductively coupled radio-frequency, plasma-assisted chemical vapor deposition. This is a low-pressure, low-temperature process used in an attempt to deposit diamond on substrates of glass, quartz, silicon, nickel, and boron nitride. Several deposition parameters have been varied including substrate temperature, gas concentration, gas pressure, total gas flow rate, rf input power, and deposition time. Analytical methods employed to determine composition and structure of the deposits include scanning electron microscopy, absorption spectroscopy, scanning Auger microprobe spectroscopy, and Raman spectroscopy. Analysis indicates that particles having a thin graphite surface, as well …

Traffic Signal Control - A Neural Network Approach, Gerard Nivard Cadet

FIU Electronic Theses and Dissertations

Artificial Neural Networks (ANNs) have been proven to be an important development in a variety of problem solving areas. Increasing research activity in ANN applications has been accompanied by equally rapid growth in the commercial mainstream use of ANNs. However, there is relatively little research of practical application of ANNs taking place in the field of transportation engineering. The central idea of this thesis is to use Artificial Neural Network Software Autonet in connection with Highway Capacity Software to estimate delay. Currently existing signal control system are briefly discussed and their short coming presented. As a relative new mathematical model, …

Capacity And Stiffness Of Bridge Abutments During Earthquakes, Rakesh K. Goel

Civil and Environmental Engineering

No abstract provided.

Binary Ferrihydrite Catalysts, Gerald P. Huffman, Jianmin Zhao, Zhen Fang

Chemical and Materials Engineering Faculty Patents

A method of preparing a catalyst precursor comprises dissolving an iron salt and a salt of an oxoanion forming agent, in water so that a solution of the iron salt and oxoanion forming agent salt has a ratio of oxoanion/Fe of between 0.0001:1 to 0.5:1. Next is increasing the pH of the solution to 10 by adding a strong base followed by collecting of precipitate having a binary ferrihydrite structure. A binary ferrihydrite catalyst precursor is also prepared by dissolving an iron salt in water. The solution is brought to a pH of substantially 10 to obtain ferrihydrite precipitate. The …

International Symposium On Macromolecular Architecture, Otto Vogl, Jane C. Vogl, Tatsuki Kitayama

Emeritus Faculty Author Gallery

No abstract provided.

Polymer Science In Vietnam, Otto Vogl, Dang Van Luyen, Dang Mai-Huong

Emeritus Faculty Author Gallery

No abstract provided.

The Threshold Value Of A Quality Index For Formation Of Cellular Manufacturing Systems, Hamid Seifoddini, Manocher Djassemi

Industrial Technology and Packaging

The superiority of cellular manufacturing to job shop manufacturing has been questioned by a number of simulation studies. The initial structure of the machine-part matrix seems to play an important role in the failure of cellular manufacturing systems in these studies. In this paper a grouping measure called 'quality index - QI' will be used to evaluate the relationship between the quality of a machine-part matrix and the performance of the corresponding cellular manufacturing system. A simulation study will be conducted to demonstrate how the procedure can be used to determine the threshold value for QI beyond which the cellular …

Diffuse Energy Propagation On Heterogeneous Plates: Structural Acoustics Radiative Transfer Theory, Joseph A. Turner, Richard L. Weaver

Department of Engineering Mechanics: Faculty Publications

The propagation of diffuse energy on an unwetted flat plate with attached heterogeneities is examined using a statistical, multiple scattering approach. The statistically homogeneous heterogeneities lightly couple the membrane and flexural waves. The problem is formulated in terms of the Bethe–Salpeter equation, which governs the field covariance. It is reduced to a radiative transfer equation in the limit that the attenuations per wave number are small, i.e., when the heterogeneities are weak. This radiative transfer equation governs the diffuse energy propagation as a function of space, time, and propagation direction. Solutions of the radiative transfer equation are presented for the …

Acuta Enews December 1996, Vol. 25, No. 12

ACUTA Newsletters

In This Issue

Fifth Annual Institutional Excellence Awards Competition

ACUTA News will have a new look

Welcome New Members

President's Message

Emergency Phone Provide Security

DC at a Glance

Fiber Optic Video Systems for Campus Networking

Campus News Briefs

Industry Insights

From ACUTA Headquarters

Magnetic Dynamics In Underdoped Yba₂Cu₃O₇₋ₓ: Direct Observation Of A Superconducting Gap, Pengcheng Dai, Mohana Yethiraj, Herbert A. Mook, Terrence B. Lindemer, Fatih Dogan

Materials Science and Engineering Faculty Research & Creative Works

Polarized and unpolarized triple-axis neutron measurements were performed on an underdoped crystal of YBa₂Cu₃O_7-x (x = 0.4 ± 0.02, T_c = 62.7 K). Our results indicate, contrary to earlier evidence, that the spin excitations in the superconducting state are essentially the same as those in the fully doped material except that the unusual 41 meV resonance is observed at 34.8 meV. The normal state spin excitations are characterized by a weakly energy-dependent continuum whose temperature dependence shows the clear signature of a superconducting gap at T_c. The enhancement at the resonance is …

A Stochastic Model For Crystal-Amorphous Transition In Low Temperature Molecular Beam Epitaxial Si(111), R. Venkatasubramanian, Suresh Gorantla, S. Muthuvenkatraman, Donald L. Dorsey

Electrical & Computer Engineering Faculty Research

Molecular beam epitaxial Si (111) grown below a certain temperature result in amorphous structure due to the limited surface mobility of atoms in finding correct epitaxial sites. In spite of many experimental and theoretical studies, the mechanism of crystal‐amorphous transition and its dynamics related to the growth conditions are not well understood. In this article, we present a theoretical model based on the formation of stacking fault like defects as a precursor to the amorphous transition of the layer. The model is simulated based on a stochastic model approach and the results are compared to that of experiments for temperatures …

A Multimedia Manual On The World Wide Web For Telecommunications Equipment, Andrew L. Sears, Steve E. Watkins

Electrical and Computer Engineering Faculty Research & Creative Works

An interactive multimedia educational manual on the Internet through the World Wide Web for commercial optical fiber telecommunications equipment is described. The Telecommunications Laboratory Manual is a vehicle for enhancing engineering education with realistic laboratory or virtual laboratory experience. The manual provides a brief system tutorial, operating instructions, on-line help, and multimedia experimental demonstrations. It incorporates block diagrams, photographic images, and hypertext links that are mouse clickable, allowing users to access documents or links describing components or processes in any order. An experimental section guides students through laboratory experiences, demonstrates selected equipment characteristics, and provides for direct instructor contact through …

Evaluation Of Shrp Work Zone Safety Devices, Kenneth R. Agent, John O. Hibbs

Kentucky Transportation Center Research Report

The objective of this study was to use and evaluate various SHRP work zone devices. Experience with the use of these devices was obtained through trial use by the Kentucky Transportation Cabinet and various city, county, and private agencies. The devices included in the study included:

• Flashing Stop/Slow Paddle
• All-Terrain Sign and Stand
• Portable Rumble Strip
• Opposing Traffic Lane Divider
• Intrusion Alarm

The experience with the flashing stop/slow paddles was very positive indicating the potential for expanded use in the future. Six different models of flashing paddles were evaluated with some having better results than others. While the all-terrain stand …

Survey Of High School Driver Safety Programs, Kenneth R. Agent, Jerry G. Pigman

Kentucky Transportation Center Research Report

The over representation of teenage drivers in traffic collisions has been a cause of concern and the basis for the recent graduated license legislation. A subcommittee of the Safety Management System has the objective of improving teenage driver safety through development and implementation of education and training programs. The objective of this study was to obtain information on current and desired traffic safety related programs for high schools. A survey was sent to all high schools. Information was obtained from 189 of 432 schools. Current activity in the area of traffic safety was summarized. The activity with the most participation …

Detection For A Statistically-Known, Time-Varying Dispersive Channel, David W. Matolak, S. G. Wilson

Faculty Publications

Detection for the statistically known channel (SKC) is aimed at obtaining good performance in situations where our statistical knowledge of a time-varying channel is good, and where other equalization/detection schemes are either too complex to implement, or their performance is limited due to the rapidity of channel fading, or where we are simply unable to perform channel estimation. By using a statistical characterization of the channel, we develop a new detector that performs maximum-likelihood sequence estimation (MLSE) (given the channel model) on blocks of N symbols. Both symbol-spaced and fractionally spaced samples are used, to obtain two different detectors, that …

Three-Dimensional Display Utilizing A Diffractive Optical Element And An Active Matrix Liquid Crystal Display, Gregory P. Nordin, M. W. Jones, S. T. Kowel, J. H. Kulick, R. G. Lindquist

Faculty Publications

We describe the design, construction, and performance of the first real-time autostereoscopic three-dimensional (3-D) display based on the partial pixel 3-D display architecture. The primary optical components of the 3-D display are an active-matrix liquid crystal display and a diffractive optical element (DOE). The display operates at video frame rates and is driven with a conventional VGA signal. Three-dimensional animations with horizontal motion parallax are readily viewable as sets of stereo images. Formation of the virtual viewing slits by diffraction from the partial pixel apertures is experimentally verified. The measured contrast and perceived brightness of the display are excellent, but …

A Specialization Toolkit To Increase The Diversity Of Operating Systems, Calton Pu, Andrew P. Black, Crispin Cowan, Jonathan Walpole, Charles Consel

Computer Science Faculty Publications and Presentations

Virus and worm attacks that exploit system implementation details can be countered with a diversified set of implementations. Furthermore, immune systems show that attacks from previously unknown organisms require effective dynamic response. In the Synthetix project, we have been developing a specialization toolkit to improve the performance of operating system kernels. The toolkit helps programmers generate and manage diverse specialized implementations of software modules. The Tempo-C specializer tool generates different versions for both compile-time and run-time specialization. We are now adapting the toolkit to improve operating system survivability against implementations attacks.

Applicability Of Angle Parking For A Major City Street, Jerry G. Pigman, Samantha S. Jones

Kentucky Transportation Center Research Report

No abstract provided.

Evaluation Of A Regional Traffic Safety Improvement Program, Kenneth R. Agent

Kentucky Transportation Center Research Report

The objectives of this report were to document the activities and evaluate the effectiveness of a regional traffic safety improvement program in the Green River Area Development District (GRADD). This is a seven county region in western Kentucky. The goals of the program were to reduce the numbers of motor vehicle fatalities and injuries, to increase safety belt usage, and to increase public awareness of the effects of alcohol-related and high speed driving in rural areas.

A full-time employee was hired by GRADD to manage the program. A Citizen Advisory Board (CAB) was established in each county. Each CAB formulated …

Evaluation Of Incident Management Techniques (Lexington, Kentucky), Kenneth R. Agent, Jerry G. Pigman, Nikiforos Stamatiadis, Eugene Culton

Kentucky Transportation Center Research Report

The objective of this project was to evaluate and document the various incident management techniques used by the Lexington Fayette Urban County Government (LFUCG) to alleviate the impact of incidents on highways in Fayette County. Components included in the evaluation included: 1) establishment and use of traffic diversion routes, 2) use of variable message signs, 3) use of detour signing, 4) use of arrow board signs, 5) improvement of existing incident detection and verification through enhanced computerized mapping, 6) use of linked motion detection equipment, and 7) development of a public information program. The methods used to incorporate each of …

Evaluation Of Red Light Running Campaign, Kenneth R. Agent, Deborah Wagner

Kentucky Transportation Center Research Report

The purpose of this project was to use a public information and education campaign, along with increased enforcement, to reduce the problem of red light running (RLR) in Lexington, Kentucky. The objective of this portion of the project was to evaluate the effectiveness of the campaign.

The mail and telephone surveys, taken before and after the campaign, revealed that the RLR program had been successful in improving public awareness of the problems associated with disregarding traffic signals. About 60 percent of the respondents recalled seeing or hearing ads or information dealing with red light running. Approximately one-half of the respondents …