Engineering Commons^™

Electrochemical Approaches To Life-Support Resources In Space Missions And Nuclear Technologies: Hydrogen Peroxide And Uranium Films, Armando Manuel Pena-Duarte

Open Access Theses & Dissertations

Space race has developed several technological advances that have achieved and continue to achieve the success of space missions in the aerospace timeline. Currently, the number of space technical and scientific innovations is still growing––demanding new materials and developments for extreme performing applications of fuel cells, batteries, supercapacitors, and systems of nuclear energy. Space missions require life-support solutions, auto-sustainable closed-loop living environments, cleaning and sanitizing solutions against pathogens, and safe nuclear-based resources of energy––with fissile materials with well-controlled dimensions within the core fuel elements. Likewise, to guarantee safety conditions, reduce costs, and facilitate operational logistics, space missions must reduce their …

From Waste To Energy: The Electrochemical Reduction Of Co2 Using Recycled Nanostructured Catalysts, Ibrahim Badawy

Theses and Dissertations

The reduction of carbon dioxide (CO₂RR) using electrochemistry is a promising solution for the burgeoning global energy crisis. The overall vision of its implementation relies on renewable energy sources to power the reaction creating carbon neutral products and effectively closing the carbon cycle. Research in this field has come a long way since its inception in the mid-1900s. However, there remain significant hurdles and important considerations to overcome in order to reach full commercialization. Most electrocatalysts tested for CO₂RR have been designed solely for maximum performance while ignoring the environmental consequences if such a material were …

The Study Of Corrosion On Additive-Manufactured Metals., Braydan Daniels

Electronic Theses and Dissertations

The purpose of this study was to investigate and compare the corrosion mechanisms between wrought and additive-manufactured (3D-printed) copper and stainless steel. The experimental procedure consisted of measuring the open circuit potential, electrochemical impedance spectroscopy, linear sweep voltammetry, Tafel analysis, surface topology, and scanning electron microscopy for each metal within salt water, tap water, sulfuric acid, and synthetic body fluid (excluding copper in synthetic body fluid).

Overall, printed stainless steel was more corrosion-resistant than wrought stainless steel in tap water and synthetic body fluid based on OCP, LSV, and surface topology results. Additionally, printed copper was more corrosion-resistant than wrought …

Use Of Electrochemical Techniques And Statistical Analysis To Investigate The Pitting Probability Of Copper, Sina Matin

Electronic Thesis and Dissertation Repository

The development of a safe permanent disposal plan is essential for the long-term disposal of used fuel bundles. Nuclear Waste Management Organization (NWMO) has been investigating the deep geologic disposal of nuclear waste which offers the optimum passive safety system with a negligible probability of release of radionuclides into the environment.

The proposed used fuel containers (UFC) for the permanent disposal of high-level nuclear waste in Canada is comprised of a carbon steel vessel coated with a 3 mm corrosion-resistant copper layer deposited using a combination of electrodeposition and cold spray deposition. Although copper is often considered to be thermodynamically …

Intergranular And Pitting Corrosion Mechanisms Of Sensitized Aluminum Alloy Aa5083, Clayton Egleston

Williams Honors College, Honors Research Projects

The motivation and objectives of this project is to examine the mechanisms of intergranular corrosion (IGC) and pitting corrosion of sensitized AA5083. In this regard, different characterization techniques were used, including optical analysis of microstructure, cyclic potentiodynamic polarization with Tafel fitting, electrochemical impedance spectroscopy with electrical equivalent circuit (EEC) fitting, and potentiostatic current transient monitoring. The transition from IGC to pitting corrosion occurs when the grain boundaries become saturated with the β-phase (Mg₂Al₃). It was found that AA5083 becomes more vulnerable to pitting corrosion as the degree of sensitization increases.

Faceted Nanomaterial Synthesis, Characterizations And Applications In Reactive Electrochemical Membrane Filtration, Qingquan Ma

Dissertations

Facet engineering of nanomaterials, especially metals and metal oxides has become an important strategy for tuning catalytic properties and functions from heterogeneous catalysis to electrochemical catalysis, photocatalysis, biomedicine, fuel cells, and gas sensors. The catalytic properties are highly related to the surface electronic structures, surface electron transport characteristics, and active center structures of catalysts, which can be tailored by surface facet control. The aim of this doctoral dissertation research is to study the facet-dependent properties of metal or metal oxide nanoparticles using multiple advanced characterization techniques. Specifically, the novel atomic force microscope-scanning electrochemical microscope (AFM-SECM) and density functional theory (DFT) …

Determination Of Oxidation-Reduction Potential And Iron Chemistry For Solutions Generated During The Hydrometallurgical Extraction Of Copper, Jiahao Xu

Open Access Theses & Dissertations

Oxidation-reduction potential (ORP) based on iron chemistry is one of the key operating parameters during the hydrometallurgical extraction of copper. A novel ORP equation was developed previously only based on the variables of temperature and nominal ferric/ferrous ratio to predict the redox potential of the quaternary H2SO4-Fe2(SO4)3-FeSO4-H2O system. However, its applicability in more complex acidic iron sulfate solutions during the hydrometallurgical extraction of copper with different temperatures, acidic concentration, cupric concentration, nominal ferric/ferrous ratio, and total and l iron concentration has not been extended and validated. This work evaluates the applicability of novel oxidation-reduction potential equation in the H2SO4-Fe2(SO4)3-FeSO4-H2O and …

New Solid Polymer Electrolytes For Lithium, Sodium, And Calcium-Based Batteries, Francielli Silva Genier

Dissertations - ALL

The establishment of sustainable energy sources highly depends on efficient storage devices to guarantee a consistent power supply. The growing demand for lithium-ion batteries (LIBs) for this purpose, combined with concerns about lithium availability, has motivated the search for viable storage alternatives, such as sodium and calcium. While several studies have investigated different lithium-free liquid electrolytes, the transport of these alternative ions in their polymer counterparts remains understudied. The advantages of solid polymer electrolytes include the possibility of higher energy density in solid-state devices and the elimination of safety concerns associated with liquid electrolytes, such as flammability, leakage, and dendrite …

Manipulated Electrochemical Surface Reactions Induced By Oscillatory Electric Potentials On Metal Based Electrodes, Thomas Stone Welles

Dissertations - ALL

This research effort investigates the manipulation of surface electrochemical reactions induced by oscillating electric potentials on the surface of metal-based electrodes. Specifically, this research presents experimental data identifying modified electrochemical surface reactions caused by low magnitude electric potential oscillations on multilayered catalytic membranes and on implanted biometallic alloys. The scope of this effort consists of four major components: (1) perform an exhaustive literature review and analysis of the current understanding in applied surface electrochemistry and develop potential theoretical frameworks by which to interpret the experimental results; (2) identify the electrochemical manipulation via electrical oscillation while reacting nitric oxide on a …

Electrochemical Impedance Spectroscopy Of Zirconium Oxidation For In-Situ Nuclear Sensing Applications, Michael Andrew Reynolds

Boise State University Theses and Dissertations

To meet the ever-growing energy demands of the modern world, alternative forms of producing power are necessary, and the field of nuclear engineering holds promise to answer this call. Nuclear fuel cladding in light water reactors (LWRs) currently draws a large amount of attention from scientists and researchers, as it provides many challenges to design around. Since the 1950s, zirconium and its protective oxide layer have been utilized as an effective material for the task, possessing good mechanical strengths, high corrosion resistance, and a low neutron absorption cross section. Despite these beneficial properties, however, fuel cladding remains vulnerable to several …

Materials And Interfaces For Electrocatalytic Hydrogen Production And Utilization., Alexander Jiya Gupta

Electronic Theses and Dissertations

Mass industrialization over the last few centuries has created a global economy which is dependent upon fossil fuels to satisfy an exponentially increasing demand for energy. Aside from the possible depletion of this finite resource, the combustion of fossil fuels releases greenhouse gases into the atmosphere which cause the global temperature to rise – a phenomenon which has already begun to create geologic and geopolitical instability and shows no signs of abatement. One proposed method to rid humanity of its dependence on fossil fuels is to use green hydrogen as an energy carrier. In this scheme, excess electricity from a …

Highly Active And Stable Low-Pgm And Pgm-Free Catalysts For Anion Exchange Membrane Fuel Cells, Horie Adabi Firouzjaie

Theses and Dissertations

Anion exchange membrane fuel cells (AEMFCs) have recently seen significant growth in interest as their achievable current density, peak power density, and longevity have been dramatically improved. Though these advances in performance have been important for demonstrating the feasibility of the technology, nearly all AEMFCs reported in the literature have required a relatively high loading of platinum group metal (PGM)- based catalysts at both the anode and cathode electrodes. However, to take command of the low-temperature fuel cell market, AEMFCs cannot simply reach the same performance as incumbent proton exchange membrane fuel cells (PEMFCs), which have had decades of development …

Efficient Capture Of Co2 And Its Selective Reduction To Formic Acid Using Tin-Based Nanomaterials, Emmanuel Oluwaseun Abdul

Dissertations and Theses

CO₂ emissions from the combustion of fossil fuels and other anthropogenic sources have become the main contributing factors to global warming. Chemical methods of absorbing/capturing CO₂ from combustion flue gases have made it a sought-after approach in engineering emission solutions because of its simplistic and convenient operation and high absorption efficiency. The conversion of CO₂ into renewable fuels and high energy density chemicals by clean and economic processes has drawn scientists' attention over the decades. The electrocatalytic conversion of CO₂ using Sn-based materials has been demonstrated to be a promising method for producing formate, an important …

The Study Of Copper Corrosion Mechanisms Using Electrochemical Experimental Techniques., Evan Grimm

Electronic Theses and Dissertations

The purpose of this study was to discover and thoroughly explain the corrosion mechanisms of copper in saltwater, tap water and deionized water, and to apply these methods and findings when testing the corrosion mechanisms of other materials. The experimental procedure consisted of measuring the open circuit potential, electrochemical impedance spectroscopy, linear sweep voltammetry, and Tafel analysis.

The copper was found to corrode at a greater rate in saltwater, followed by tap water then deionized water, with a larger difference between saltwater and tap water than between tap water and deionized water. Each reaction was found to be both kinetically …

Modified Electrode Surfaces With Hydrogen Evolution Reaction Catalysts Derived From Electropolymerized Complexes With Redox Active Ligands., Amanda Mae Arts

Electronic Theses and Dissertations

The demand for energy is growing exponentially, and to keep up with these demands new technologies for renewable energy have received increased attention. Hydrogen is one of the most promising energy sources for the future and plays a vital role in water electrolysis and fuel cells, as the hydrogen evolution reaction (HER) is the main step in the water splitting process. To increase the reaction rate and improve efficiency for the water electrolysis, catalysts are used to minimize the overpotential.

Most of the current electrocatalysts for HER are heterogeneous in nature and are dominated by platinum and other precious metals …

Investigation Of Single, Binary, And Ternary Metal Oxides Of Iridium, Rhodium, And Palladium For Neural Interfacing Applications, Gregory Vincent Taylor

Theses and Dissertations

In this dissertation, thin film single, binary, and ternary metal oxides of iridium (Ir), ruthenium (Ru), rhodium (Rh), and palladium (Pd) were synthesized for use as electrode/microelectrode coatings for neural interfacing applications using DC reactive magnetron sputtering. Synthesis conditions which enhanced the electrochemical properties of films as measured by cyclic voltammetry and electrochemical impedance spectroscopy in a phosphate buffered saline solution of the single metal oxides were identified to be 30 mTorr working pressure, 20% oxygen partial pressure, and cathode power densities ≤ 4.9 W/cm². These parameters were then used to develop the binary and ternary metal oxide …

The Controlled Synthesis Of Hydrogen Electrocatalysts For Alkaline Exchange Membrane Fuel Cell And Electrolysis Applications Via Chemical Vapor Deposition, Stefan Thurston Dubard Williams

Doctoral Dissertations

The development of catalysts for the electrochemical processes of hydrogen systems (e.g., fuel cells and electrolyzer systems) continues to be an attractive area of research for renewable energy technologies. One significant challenge has been developing hydrogen catalysts suitable for alkaline environments, mainly due to the sluggish kinetics of hydrogen reactions. In alkaline environments, the kinetics are decreased by two orders of magnitude when compared to acidic environments. Chemical vapor deposition (CVD) is a conventional method used to synthesize these types of catalysts. This effort discusses extending work being done using a modified CVD process known as “Poor Man’s” CVD (PMCVD) …

Novel Coating Methods On Centrifugally-Spun Polymer Fibers For Applications In Lithium-Ion Batteries, Jonathan G. Ayala

Theses and Dissertations

The work presented in this thesis focuses on the processing, characterization, and electrochemical results of centrifugally spun composite carbon fiber electrodes for application as anode material in lithium-ion batteries. The work is presented as a compilation of two major projects. First, the use of novel Co3O4 wet coatings to increase the capacity of carbon fibers produced from Polyacrylonitrile (PAN). In this work, PAN fibers are produced via the Forcespinning method, and were heat treated by oxidation in air at 200 °C for four hours, and subsequent carbonization at 600 °C for six hours. The electrochemical performance of the Co3O4/C composite-fiber …

Centrifugally-Spun Ceramic/Carbon Composite Fibers And Their Use As Anode Materials In Li-Ion Batteries, Gabriel Gonzalez

Theses and Dissertations

The work in this thesis focuses in the study of Centrifugally Spun Short Fiber Composites and their Implementation as Alternate Anode Material in Li-Ion Batteries. Due to their high theoretical capacity, abundance, and environmental friendliness, metal oxides have been widely studied as alternate anode materials for lithium ion batteries (LIBs). In this research work, the processing of SnO2 and SnO2/TiO2 ceramic short fibers as well as flexible and porous metal oxide carbon fibers (FPMOCFs) by centrifugal spinning followed by an optimized coating technique is reported. In addition, the electrochemical performance of the composites was also investigated and is provided.

Mitigating Corrosion And Enhancing Energy Density Of Zinc-Based Anodes In Primary And Secondary Aqueous Batteries, Ehsan Faegh

Theses and Dissertations

Today Lithium-ion (Li-ion) batteries are the most-emphasized battery technology among the many different battery systems in the market. However, due to their high cost (especially for electric vehicle applications), flammability and toxicity, the development of inexpensive and safer alternative battery chemistries has been the focus of a significant amount of recent research. Among various battery chemistries, Aluminum-based (Al-based) and Zinc-based (Zn-based) batteries have been touted as promising options to compete with Li-ion batteries. However, the practical realization of Al battery chemistries has been difficult over a long period of time (170 years) due to a number of fundamental and intrinsic …

Bio-Inspired Materials For Electrochemical Sensors, Matthew Joseph Hummel

Electronic Theses and Dissertations

Electrochemical biosensors are a rapidly growing research area that has greatly improved its specificity, accuracy, and precision in the detection of biomolecules in contemporary literature and industry alike. Typically, these systems exist in a three-electrode conformation with a working electrode functioning as the anode, a counter electrode functioning as the cathode, and a reference electrode allowing for the control of potential in the system. The method by which these sensors work is through the sharing of electrons via redox reactions with the target molecule and the working electrode or modifications on its surface. By exploiting the function of biomaterials that …

Carbon Capture And Utilization, Sriram Valluri

Dissertations, Master's Theses and Master's Reports

As the world moves towards clean energy initiative, carbon capture and utilization technologies are key to achieving net zero emissions. CO2 capture with amines has many disadvantages and cannot be applied to commercial power plants. The current manuscript will address this issue as well as a solution that involves the use of low-cost alkali absorbent CO₂ capture solutions, combined with an electrochemical regeneration method that uses the least amount of energy available for capture and regeneration. This research will also further address the issue of how to deal with the captured CO2. Several viable storage and utilization methods have …

Studying The Effects Of New Additive Materials For The Improvement Of The Capacity And Cycle Life Performance Of The Lead-Acid Battery, Julian Kosacki

Doctoral Dissertations

"Lead-acid batteries are an established technology with nearly 99% recyclability; however, lead-acid batteries produce only 40% of their theoretical capacity due to poor active mass utilization and PbSO4 pore blockage, and the longevity of the batteries is hampered by secondary reactions during the cycle life such as corrosion and gassing.

Lead-acid batteries were investigated and improved through several different approaches: an alternative electrolyte to mitigate secondary reactions, graphite additives to improve positive active mass (PAM) utilization, and dispersant additives to help the industrial pasting process.

The thermodynamics and chemical reactions of a commercial electrolyte replacement called Tydrolyte^TM were investigated …

Investigation Of Iron-Nickel Based Nanoparticles As Catalysts For Oxygen Evolution Reaction (Oer), Prashant Acharya

Graduate Theses and Dissertations

Hydrogen fuel is increasingly seen as an appealing alternative by both the scientific and the industrial communities in the drive towards a clean energy future. Hydrogen, unlike fossil-based fuels, does not release carbon dioxide, a chief component of greenhouse gases, upon combustion. However, more than 95% of the hydrogen in the world is still produced by burning fossil fuels as this method is currently the only economically feasible option at a large industrial scale.

Water electrolysis shows a lot of potential in both hydrogen generation and in the storage of energy from renewable sources such as wind and sunlight. Likewise, …

Cold Plasma Enhanced Active Sites On Supported Nip Nanoparticles For The Oxygen Evolution Reaction, Michael Ricci

Williams Honors College, Honors Research Projects

Identifying materials to efficiently facilitate the oxygen evolution reaction (OER) is key to advancing water electrolysis, an essential technology in the pathway towards a sustainable energy future. Here, we explore cold-plasma treatment as a facile method to enhance the activity of NiP nanoparticles supported on activated carbon. NiP nanoparticles were synthesized on an activated carbon support using a solid-state method and were then treated with argon, oxygen, and hydrogen plasmas for extended times. In all cases, plasma treatment reduced the number of active sites on the support. OER activity was evaluated by testing the materials in alkaline conditions. The activities …

Biomass-Derived Electrode Materials And Sustainable Processes For Supercapacitors, Katelyn M. Shell

Theses and Dissertations

Biomass is one of the most abundant natural resources and has been used as a source of energy for thousands of years. Biomass as a precursor for energy storage materials is still relatively novel and faces several obstacles before becoming commonly used in today’s electrical devices. Currently, energy storage devices, such as batteries, capacitors, and supercapacitors, utilize petroleum-derived graphitic carbons for anodes, generating a need for more sustainable materials. Biomass, as a carbon-rich source for electrode materials, presents a viable and economically feasible alternative due to the prevalent lignocellulosic compounds: lignin, cellulose, and hemicellulose. Preliminary studies on the solid residues …

Enhanced Kinetics And Modeling Of Pan-Based Carbon Felt Anodes In Vanadium Redox Flow Batteries, Michael Cyrus Daugherty

Doctoral Dissertations

All-vanadium redox flow batteries (VRFBs) are a promising technology for grid-level energy storage, however, there are still several limitations in the forms of durability, efficiency, and overall costs, which are barriers to its commercial viability. With both bulk electrolyte flowing through its porous matrix and species flux at the solid-electrolyte interface, electrodes are the component of VRFB systems which host electrochemical reactions and facilitate contact between the liquid phase electrolyte and the electronically conductive solid phase. While the more limiting electrode in VRFB systems is dependent on the material, for polyacrylonitrile (PAN)-based carbon felts, the anode constitutes a larger portion …

Mxenes As Flow Electrodes For Capacitive Deionization Of Wastewater, Naqsh E. Mansoor

Boise State University Theses and Dissertations

The energy-water nexus poses an integrated research challenge, while opening up an opportunity space for the development of energy efficient technologies for water remediation. Capacitive Deionization (CDI) is an upcoming reclamation technology that uses a small applied voltage applied across electrodes to electrophoretically remove dissolved ionic impurities from wastewater streams. Similar to a supercapacitor, the ions are stored in the electric double layer of the electrodes. Reversing the polarity of applied voltage enables recovery of the removed ionic impurities, allowing for recycling and reuse. Simultaneous materials recovery and water reclamation makes CDI energy efficient and resource conservative, with potential to …

Brominated Carbon Materials As Positive Electrodes For Nonaqueous Secondary Lithium-Bromine Batteries, Benjamin Beau Peterson

LSU Doctoral Dissertations

Secondary lithium-bromine (Li-Br₂) batteries have theoretical potentials near 4.1 V vs Li/Li⁺ and capacities more than 2 times greater than conventional Li-ion batteries. Herein, secondary, non-aqueous Li-Br₂ half-cell batteries are reported using a Li metal anode, carbon-coated glass fiber separator, non-aqueous Li-based electrolytes with and without the addition of lithium bromine (LiBr) salt, and positive electrodes consisting of either chemically brominated non-graphitic carbon or carbon derived from the carbonization of metal-organic frameworks (MOFs) with LiBr embedded into the micro- and mesopores of the carbon matrix. The separator is effective in mitigating the transport of Br_{2 …}

Engineering Ionomer Materials For Addressing Ohmic Resistances In Electrochemical Desalination And Waste Heat Recovery, Varada Menon Palakkal

LSU Doctoral Dissertations

Water scarcity and energy availability present important challenges that need to be addressed in the coming centuries. In the front of water technologies, desalting brackish water is of extreme importance for thermal electric power plants, chemical manufacturing plants, and other industrial operations that treat and reuse their water utilities. Membrane capacitive deionization (MCDI) is an energy efficient desalination technique that has drawn attention from commercial entities. Most material research studies on MCDI focus on enhancing electrode performance while little emphasis is given to rationale design of ion-exchange membranes (IEMs). In this work, the ionic conductivity, permselectivity, and thickness for three …