Engineering Commons^™

Engineering Hyaluronic Acid Carbon Nanotube Nanofibers: A Peripheral Nerve Interface To Electrically Stimulate Regeneration, Elisabeth M. Steel

Wayne State University Dissertations

Peripheral nerve injuries annually affect hundreds of thousands of people globally. Current treatments like the gold standard autograft and commercially available nerve guide conduits (NGC) are insufficient to repair long gap peripheral nerve injuries. NGCs can aid recovery but lack key microenvironment cues that promote nerve regeneration. We hypothesized that providing topographical, mechanical, and electrical guidance cues through a nanofibrous composite biopolymer would result in improved neuron growth metrics using an in vitro model. We embedded hydrophilic carbon nanotubes (CNT) within hyaluronic acid (HA) nanofibers by electrospinning. The aims of this study were (1) to define the topographical, nanomechanical, and …

Molded Features In Pdms For Fabricating Bacterial Cellulose For Various Geometries, Mitchell Habegger

Williams Honors College, Honors Research Projects

The purpose of producing features on bacterial cellulose (BC) is to facilitate the elongation and alignment for cells, in this case Normal Human Dermal Fibroblast (NHDF) cells. The elongated cells have applications in wound healing, tissue engineering, disease diagnostics, and many other fields. Experiments were run to test the effectiveness of transferring features to BC sheets from features induced by fracturing on polydimethylsiloxane (PDMS) and those duplicated from molds with existing features. The features were duplicated to BC sheets by either air drying or Guided Assembly-Based Biolithography (GAB). The research results showed that fracture inducing on PDMS produced very small …

Syngenic Adipose-Derived Stem/Stromal Cells Delivered In Decellularized Adipose Tissue Scaffolds Enhance In Vivo Tissue Regeneration Through Host Cell Recruitment, Kevin P. Robb

Electronic Thesis and Dissertation Repository

Decellularized adipose tissue (DAT) represents a promising adipogenic bioscaffold for applications in soft tissue augmentation or reconstruction. With the goal of investigating the role of syngeneic donor adipose-derived stem/stromal cells (ASCs) and host myeloid cells during in vivo adipose tissue regeneration, transgenic reporter mouse strains were used to track these cell populations within ASC-seeded and unseeded DAT scaffolds. Donor ASCs were obtained from dsRed transgenic mice. These cells were shown to express characteristic cell surface markers, and multilineage differentiation capacity was confirmed. To facilitate cell tracking, DAT scaffolds were subcutaneously implanted into MacGreen mice in which myeloid cells express enhanced …

Effects Of Uniaxial Cyclic Strain On Endothelial Progenitor Cells, Maria Alejandra Zeballos Castro

Biomedical Engineering Undergraduate Honors Theses

Despite the high prevalence of calcific aortic valve disease (CAVD), the underlying mechanisms of pathogenesis have not been found yet. Therefore, it is extremely important to study CAVD and understand how it develops. For this matter, we decided to study the potential of endothelial progenitor cells (EPCs) for use in tissue-engineered models of heart valves. EPCs were chosen as the cell source of interest for this study due to their high neovascularization potential and use in regenerative medicine and cardiovascular tissue engineering.

In this project, we aimed to engineer the microenvironment of cells that are involved in the formation of …

Development And Characterization Of Tissue Engineered Blood Vessel Mimics Under "Diabetic" Conditions, Shelby Gabrielle Kunz

Master's Theses

The development of tissue engineered blood vessel mimics for the testing of intravascular devices in vitro has been established in the Cal Poly tissue engineering lab. Due to the prevalence of cardiovascular disease in diabetic patients and minimal accessible studies regarding the interactions between diabetes and intravascular devices used to treat vascular disease, there is a need for the development of diabetic models that more accurately represents diabetic processes occurring in the blood vessels, primarily endothelial dysfunction. This thesis aimed to create a diabetic blood vessel mimic by implementing a high glucose environment for culturing human endothelial cells from healthy …

Development Of A Programmed Electrospun Three Dimensional (3d) Nanofiber Collecter And It’S Application To Orthopedic Implant Coatings, Liang Chen

Wayne State University Dissertations

Orthopedic implants might not directly unite with bones especially in compromised patients even if they have been appropriately fixed. The lack of early osseointegration would lead to the failure of the orthopedic implant. A “bone-like” implant surface is urgently needed to accelerate osseointegration. Electrospun nanofiber (NF) is a promising implant coating due to its highly porous nanoscale structure. It mimics the collagen I nanofibrous network of bone tissue; meanwhile it has been widely used as a drug delivery device. However, its compact and dense structure is not ideal for cell growth. Our strategy was to develop a functional three-dimensional (3D) …

3d Bioprinting Hydrogel For Tissue Engineering An Ascending Aortic Scaffold, Benjamin Stewart

Electronic Theses and Dissertations

The gold standard in 2016 for thoracic aortic grafts is Dacron^®, polyethylene terephthalate, due to the durability over time, the low immune response elicited and the propensity for endothelialization of the graft lumen over time. These synthetic grafts provide reliable materials that show remarkable long term patency. Despite the acceptable performance of Dacron^® grafts, it is noted that autographs still outperform other types of vascular grafts when available due to recognition of the host's cells and adaptive mechanical properties of a living graft. 3-D bioprinting patient-specific scaffolds for tissue engineering (TE) brings the benefits of non-degrading synthetic …

Developing Afm Techniques For Testing Peg Hydrogels, Hannah L. Cebull, Jessica Stukel, Rebecca Willits

Williams Honors College, Honors Research Projects

Many instruments are used to find elastic properties of biological samples using methods such as tensile and bending tests, but using the atomic force microscope (AFM) is considered a non-destructive method because it can provide repeated local stiffness information without damaging the sample. It additionally allows the sample to be tested in an aqueous environment, which is optimal for soft materials such as hydrogels. The nanoindentation is performed via cantilever, measuring the deflection of the cantilever during the contact of the sample using a laser. Compared to hard samples, testing soft materials can present more challenges when working with the …

Biophysical Characterization And Theoretical Analysis Of Molecular Mechanisms Underlying Cell Interactions With Poly(N-Isopropylacrylamide) Hydrogels, Michael C. Cross

USF Tampa Graduate Theses and Dissertations

So-called, “Dynamic biomaterials” comprised of stimuli-responsive hydrogels are useful in a wide variety of biomedical applications including tissue engineering, drug delivery, and biomedical implants. More than 150,000 peer-reviewed articles (as of 2016) have been published on these materials, and more specifically, over 100,000 of these are on the most widely studied, poly(N-isopropylacrylamide). This thermoresponsive polymer in a crosslinked hydrogel network undergoes a large volume phase transition (𝑉/𝑉₀ ~ 10 − 100) within a small temperature range (𝑇 ~ 1 − 3𝐾) making it particularly useful for tissue engineering applications because of the ability to control the topographical configuration of …

Fabrication And Characterization Of An Extracellular Matrix Hydrogel For Aortic Valve Applications, Brady Culbreth

All Theses

With an estimated 5 million people suffering from valve disease in the United, valve disease is currently the leading cause of cardiovascular disease. Each year, between 80,000 and 85,000 aortic valve replacements are performed in order to treat the stenotic heart valves. Despite this being a worldwide epidemic, the current valve replacement options that are on the market have distinct limitations. Furthermore, a viable alternative does not exist for the patients that are not candidates for the current treatment methods. Our proposed solution to this epidemic is to create a highly viable injectable scaffold that would allow for the minimally …

Densified Collagen-Fibril Biomaterials For Bone Tissue Engineering, Lauren E. Watkins

Open Access Theses

Millions of craniofacial bone defects occur annually as a result of trauma, congenital defects, disease, or tooth extraction. When present in the oral cavity, these defects are associated with adverse impacts on speech, mastication, and aesthetics. Thus, there is a clinical need for interventional strategies to restore and preserve alveolar bone mass to improve the success of future treatment options intended to reestablish functionality and aesthetics. Guided bone regeneration using bone grafts and a membrane represent the current standard of care for repairing alveolar bone defects, but face a number of limitations related to resorption time and structural integrity. Improvements …

An Injectable Stem Cell Delivery System For Treatment Of Musculoskeletal Defects, Shirae Leslie

Theses and Dissertations

The goal of this research was to develop a system of injectable hydrogels to deliver stem cells to musculoskeletal defects, thereby allowing cells to remain at the treatment site and secrete soluble factors that will facilitate tissue regeneration. First, production parameters for encapsulating cells in microbeads were determined. This involved investigating the effects of osmolytes on alginate microbead properties, and the effects of alginate microbead cell density, alginate microbead density, and effects of osteogenic media on microencapsulated cells. Although cells remained viable in the microbeads, alginate does not readily degrade in vivo for six months. Therefore, a method to incorporate …

Synthesis, Optimization, And Degradation Of A Fish Glue/Plga Polymer., Adam T. Schworer 1989-

Electronic Theses and Dissertations

Biomaterials used for tissue engineering, specifically polymers, come from either naturally occurring, like gelatin or collagen, or synthetic sources, such as polyesters. Often times, it is advantageous to combine biomaterials in order to maximize certain material properties, such as cellular adhesion and degradation. The purpose of this study is to provide direction for the synthesis, characterization, and a combination of a combination biomaterial between fish glue (FG), a natural source polymer, and poly-lactic-co-glycolic acid (PLGA), a synthetically made polyester. First, FG is characterized for molecular weight via Gel Permeation Chromatography, GPC. Two combination methods to mix FG/PLGA solutions are then …

Biodegradable Nano-Hybrid Polymer Composite Networks For Regulating Cellular Behavior, Charles Henley Sprague

Masters Theses

Photo-crosslinkable polymeric biomaterials have emerged in the field of biomedical research to promote tissue regeneration. For example, scaffolds that can be crosslinked and hardened in situ have been known to make suitable implant alternatives. Since injectable and photo-crosslinkable biomaterials offer the advantage of being minimally invasive, they have emerged to compete with autografts, a current highly invasive method to repair diseased tissue. A series of novel photo-crosslinkable, injectable, and biodegradable nano-hybrid polymers consisting of poly(ε-caprolactone fumarate) (PCLF) and polyhedral oligomeric silsesquioxane (POSS) has been synthesized in our laboratory via polycondensation. To engineer the material properties of the nano-hybrid networks, varied …

Piezoelectric Scaffolds For Osteochondral Defect Repair, Sita Mahalakshmi Damaraju

Dissertations

Osteoarthritis is one of the most prevalent causes of disability affecting nearly 27 million Americans. Osteoarthritis is caused when extensive damage occurs to the articular cartilage later spreading to the underlying subchondral bone, resulting in osteochondral defects. The current clinical therapies aim at regenerating the hyaline cartilage, but instead fibrocartilage forms at the osteochondral defect site, which is inferior in structure and function and fails to integrate with the surrounding tissue. A biomimetic scaffold, which can provide cues similar to the native extracellular matrix, may facilitate osteochondral defect repair. Articular cartilage and bone extracellular matrix have been shown to produce …

3d-Bioengineering Of The Conventional Outflow Tract For High Throughput Drug Or Gene Transfer Screening For Glaucoma Treatment, Cula Nolise Dautriche

Legacy Theses & Dissertations (2009 - 2024)

Among ocular pathologies, glaucoma remains the second leading cause of blindness. The molecular mechanisms that lead to glaucoma have been attributed to damage of the conventional outflow tract. Conventional outflow tissues, a composite of the trabecular meshwork and the Schlemm's canal, regulate and maintain homeostatic responses of aqueous humor outflow. In glaucoma, drainage of aqueous humor into the Schlemm's canal is hindered, leading to an increase in intraocular pressure (IOP). That increase in IOP is directly correlated with retinal ganglion cell death, eliminating the relay of visual information to the thalamus and visual cortex, leading to blindness. Although disturbance in …

Brown Adipogenesis Of Mouse Embryonic Stem Cells In Alginate Microstrands, Andrea Mannarino Unser

Legacy Theses & Dissertations (2009 - 2024)

The ability of brown adipocytes (fat cells) to dissipate energy as heat shows great promise for the treatment of obesity and other metabolic disorders. Employing pluripotent stem cells, with an emphasis on directed differentiation, may overcome many issues currently associated with primary fat cell cultures. However, brown adipocytes are difficult to transplant in vivo due to the instability of fat, in terms of necrosis and neovascularization, once injected. Thus, 3D cell culture systems that have the potential to mimic adipogenic microenvironments are needed, not only to advance brown fat implantation, but also to better understand the role of brown adipocytes …

Functional Co-Substituted Poly[(Amino Acid Ester)Phosphazene] Biomaterials, Amanda L. Baillargeon

Electronic Thesis and Dissertation Repository

The development of new and improved biomaterials is essential for tissue engineering and regenerative medicine applications. Amino acid-based polyphosphazenes are being explored as scaffold materials for tissue engineering applications due to their non-toxic degradation products and tunable material properties. This work focuses on the synthesis of non-functional and novel functional poly[(amino acid ester)phosphazene]s using a facile method of thermal ring opening polymerization followed by one-pot room temperature substitution. The family of polyphosphazenes developed in this work is based on L-alanine (PNEAs), L-phenylalanine (PNEFs), and L-methionine (PNEMs) with L-glutamic acid imparting the functionality. Characterization of these materials demonstrated that the one-pot …

Characterizing The Reproducibility Of The Properties Of Electrospun Poly(D, L-Lactide-Co-Glycolide) Scaffolds For Tissue-Engineered Blood Vessel Mimics, Toni M. Pipes

Master's Theses

“Blood vessel mimics” (BVMs) are tissue-engineered constructs that serve as in vitro preclinical testing models for intravascular devices. The Cal Poly Tissue Engineering lab specifically uses BVMs to test the cellular response to stent implantation. PLGA scaffolds are electrospun in-house using the current “Standard Protocol” and used as the framework for these constructs. The performance of BVMs greatly depends on material and mechanical properties of the scaffolds. It is desirable to create BVMs with reproducible properties so that they can be consistent models that ultimately generate more reliable results for intravascular device testing. Reproducibility stems from the consistency of the …

Engineering Bacterial Cellulose Scaffold And Its Biomimetic Composites For Bone And Cartilage Tissue Regeneration, Pelagie Marlene Favi

Doctoral Dissertations

A very promising approach to quickly and safely restore normal function to extensively damages and diseases bone and cartilage tissues is the regeneration of these injured tissues using an engineered support scaffold. This dissertation research focuses on the development and evaluation of native bacterial cellulose (BC) and chemically modified BCs as potential biomaterials for bone and cartilage regeneration using equine-derived bone marrow mesenchymal stem cells (EqMSCs).

The ability of native BC scaffold to maintain cell proliferation, viability, and in vitro differentiation of the seeded EqMSCs for application in bone and cartilage tissue engineering was studied. BC morphology was characterized using …

Human Hair Keratin Protein, Hair Fibers And Hydroxyapatite (Ha) Composite Scaffold For Bone Tissue Regeneration, Samuel Siyum

ETD Archive

The field of tissue engineering aims at promoting the regeneration of tissues or replacement of failing or malfunctioning tissue by means of combining a scaffold material, adequate cells and bioactive molecules. Different materials have been proposed for use as three-dimensional porous scaffolds for bone tissue engineering procedures. Among them, polymers of natural origin are one of the most attractive options mainly due to their similarities with the extracellular matrix (ECM), chemical versatility as well as typically good biological performance. In this study, two biocompatible composite scaffolds were developed from natural polymer by tissue engineering approach and tested in vitro. The …

Biological Scaffolds For Peripheral Vascular Surgery, George Fercana

All Dissertations

The gold standards for small diameter peripheral vascular graft replacement are autologous arteries or veins; however, one-third of patients lack such vessels due to previous vessel harvesting or advanced vascular disease. A promising approach for patients in this category is tissue engineering with off-the-shelf biological vascular grafts. Three small diameter acellular scaffolds were developed and evaluated as vascular grafts. Porcine renal arteries (2-3 mm diameter, 20 mm length) were decellularized by immersion and stabilized with penta-galloyl glucose (PGG) with and without subsequent heparinization via carbodiimide chemistry. Bovine mammary (4-6 mm ID, 250 mm length) and femoral arteries (6-8 mm ID, …

Electrospinning Of Core-Shell Collagen Nanofibers, Ying Li

Electronic Thesis and Dissertation Repository

In tissue engineering, the scaffold plays a critical role in guiding and supporting cells to function and grow optimally. The electrospun nanofibrous scaffold can serve as a near ideal substrate for tissue engineering because it has high surface area and the three-dimensional interconnected porous network can enhance cell attachment and proliferation. Core-shell nanofibrous scaffolds produced with coaxial electrospinning allow bioactive molecule encapsulation to improve cell adhesion, mediate and promote the proper signaling among the cells for their functioning and growth. In the current study, core-shell collagen nanofibers were fabricated via coaxial electrospinning with horizontal and vertical configurations. Core-shell nanofibers with …

A Novel Hybrid Hydrogel For Scaffold-Mediated Gene Delivery, Jeremy Zhang

All Dissertations

Scaffold-mediated nonviral gene delivery avoids several drawbacks of systemic injection such as clearance by the reticulo-endothelial system and serum aggregation. Existing synthetic and natural polymers used in gene delivery scaffolds are primarily derived from other tissue engineering applications with design parameters focused on the physicochemical properties of the scaffold and its biocompatibility. Common synthetic materials used in polymeric scaffolds such as PEG are practically bio-inert with minimal cell and protein interaction. Therefore, an opportunity exists for the rational design novel gene delivery scaffolds with components capable of increasing the expression of incorporated transgene by including scaffold components that interact with …

Spatial Control Of Magnetic Nanoparticles Integrated With Cellular Spheroids As Tissue Engineered Building Blocks, Brandon Mattix

All Dissertations

Magnetic nanoparticles (MNPs) have been investigated in tissue engineering applications to provide in situ imaging, drug delivery, and tissue patterning, but direct and prolonged interaction between cells and MNPs can have adverse effects on cell function. Therefore, methods which reduce or limit the interaction of MNPs with cells, or utilize more biocompatible MNP-based strategies will improve upon the commonly used iron oxide MNPs. We investigated a variety of methods to improve upon the use of MNPS in tissue engineering.
Cell aggregates, or spheroids, have been used as tissue engineered building blocks that can closely mimic the native three-dimensional in vivo …

Shelf Life Study Of Electrospun Plga Copolymers, Sean Youra, Nick Hudson

Biomedical Engineering

Poly(lactic-co-glycolic acid) (PLGA) is one of the most commonly used copolymers for electrospinning in tissue engineering applications. However, most research has not focused on the copolymer itself in regards to how long it can be used effectively and if varying the concentrations of polylactic acid (PLA) and polyglycolic acid (PGA) affect the resulting properties. Electrospinning is the method we use to create the three-dimensional constructs, or “scaffolds”, for the blood vessel mimic (BVM) in the tissue engineering lab. The aim of our project was to investigate if the morphology and mechanical properties of the scaffolds changed over time when they …

Femtosecond Laser Patterned Templates And Imprinted Polymer Structures, Deepak Rajput

Doctoral Dissertations

Femtosecond laser machining is a direct-write lithography technique by which user-defined patterns are efficiently and rapidly generated at the surface or within the bulk of transparent materials. When femtosecond laser machining is performed with tightly focused amplified pulses in single-pulse mode, transparent substrates like fused silica can be surface patterned with high aspect ratio (>10:1) and deep (>10 μm) nanoholes. The main objective behind this dissertation is to develop single-pulse amplified femtosecond laser machining into a novel technique for the production of fused silica templates with user-defined patterns made of high aspect ratio nanoholes. The size of the …

Sol-Gel Derived Biodegradable And Bioactive Organic-Inorganic Hybrid Biomaterials For Bone Tissue Engineering, Bedilu A. Allo

Electronic Thesis and Dissertation Repository

Treatments of bone injuries and defects have been largely centered on replacing the lost bone with tissues of allogeneic or xenogeneic sources as well as synthetic bone substitutes, which in all lead to limited degree of structural and functional recovery. As a result, tissue engineering has emerged as a viable technology to regenerate the structures and therefore recover the functions of bone tissue rather than replacement alone. Hence, the current strategies of bone tissue engineering and regeneration rely on bioactive scaffolds to mimic the natural extracellular matrix (ECM) as templates onto which cells attach, multiply, migrate and function.

In this …

Melt Blown Poly(Lactic Acid) For Application As A Tissue Engineering Scaffold, William Horst Gazzola

Masters Theses

Poly(lactic acid) (PLA) was melt blown (MB) under varying processing conditions to create webs with micro and nano-architecture. Processing parameters varied were primary air flow rate and collector distance. In total, twenty-one webs were produced and the physical properties of the webs were investigated including, mean fiber diameter and fiber diameter distribution, mean pore diameter and pore size distribution, web thickness, degree of crystallinity, tensile modulus and degradation rate. Four webs, two with micro and two with nano-architecture, thought suitable for use as tissue engineering scaffolds were selected for seeding with A375 human malignant melanoma cells. Cell culture was conducted …

Modulation Of Bone And Nerve Cell Behavior Using Biodegradable Polymer Networks, Lei Cai

Doctoral Dissertations

This dissertation presents novel biodegradable and photo-crosslinkable building blocks to achieve polymer networks with controlled surface chemistry, stiffness, and topographical features for investigating cell-material interactions and targeting hard and soft tissue engineering applications. Chapter I reviews the recent progress in polymeric gel systems and how their physical properties can be tailored to regulate cell functions and satisfy the clinical needs. Chapter II presents a facile method to synthesize photo-crosslinkable poly(epsilon-caprolactone) acrylates (PCLAs) and reveal tunable cell responses to photo-crosslinked PCLAs. Chapter III investigates the mechanism of colorization in preparing crosslinkable polymers by reacting hydroxyl-containing polymers with unsaturated anhydrides or acyl …