Open Access. Powered by Scholars. Published by Universities.®

Engineering Commons

Open Access. Powered by Scholars. Published by Universities.®

Articles 61 - 90 of 90

Full-Text Articles in Engineering

Adaptive Learning For Event Modeling And Pattern Classification, Shuangshuang Dai Jan 2004

Adaptive Learning For Event Modeling And Pattern Classification, Shuangshuang Dai

Dissertations

It is crucial to detect, characterize and model events of interest in a new propulsion system. As technology advances, the amount of data being generated increases significantly with respect to time. This increase substantially strains our ability to interpret the data at an equivalent rate. It demands efficient methodologies and algorithms in the development of automated event modeling and pattern recognition to detect and characterize events of interest and correlate them to the system performance. The fact that the information required to properly evaluate system performance and health is seldom known in advance further exacerbates this issue.

Event modeling and …


A Micromachined Thermo-Optical Light Modulator Based On Semiconductor-To-Metal Phase Transition, Lijun Jiang Jan 2004

A Micromachined Thermo-Optical Light Modulator Based On Semiconductor-To-Metal Phase Transition, Lijun Jiang

Dissertations

In this research, a micromachined thermo-optical light modulator was realized based on the semiconductor-to-metal phase transition of vanadium dioxide (VO2) thin film. VO2 undergoes a reversible phase transition at approximately 68 0C, which is accompanied with drastic changes in its electrical and optical properties. The sharp electrical resistivity change can be as great as five orders. Optically, VO2 film will switch from a transparent semiconductor phase to a reflective metal phase upon the phase transition. The light modulator in this research exploits this phase transition related optical switching by using surface micromachined low-thermal-mass pixels to achieve …


Intercity Travel Demand : A Utility-Consistent Simultaneous Trip Generation And Mode Choice Model, Guilin Li Jan 2004

Intercity Travel Demand : A Utility-Consistent Simultaneous Trip Generation And Mode Choice Model, Guilin Li

Dissertations

An intercity travel decision includes a complex set of subdecisions, such as when to travel, where to travel, which mode to choose, and others. The main focus of this dissertation is to examine trip frequency and mode choice of intercity non-business travel.

The objective of this study is to understand intercity travel behavior using disaggregate models. The proposed conceptual framework for intercity travel behavior leads to a nested logit/continuous choice model that is rigorously linked to the utility maximization theory. Compared to a traditional intercity travel demand model, the proposed model is utility consistent in that trip generation and mode …


Effect Of Fullerene Containing Lubricants On Wear Resistance Of Machine Components In Boundary Lubrication, Andriy Titov Jan 2004

Effect Of Fullerene Containing Lubricants On Wear Resistance Of Machine Components In Boundary Lubrication, Andriy Titov

Dissertations

Fullerenes, a new form of carbon nanomaterials, possess unique physical and mechanical properties that make their use as additives to liquid lubricants potentially beneficial. The goal of this study was to investigate the effect of fullerene containing lubricants on wear resistance of steel-bronze couples operating under boundary lubrication conditions. A mathematical model of deformed asperity contact was built to calculate real contact area and real contact pressure. Computer controlled wear friction testing methodology and equipment were designed, developed and implemented for obtaining reliable and objective experimental data. In addition, optical and scanning electron microscopy and standard surface texture analysis were …


Migration Of An Intruder Particle In A Boundary Driven Shear Flow, Jian Liu Jan 2004

Migration Of An Intruder Particle In A Boundary Driven Shear Flow, Jian Liu

Dissertations

This study reports on three-dimensional, discrete element simulations of a single large spherical intruder in a Couette shear flow composed of uniform sized particles. The simulation results are useful in providing a numerical reproduction of the experiments for size segregation and mixing. This in turn has a major importance in many industries which are concerned with handling of particles and powders, such as pharmaceutical manufacturing, agriculture, chemical and mineral processing.

Discrete element simulations are carried out using the "soft sphere" model of Walton, et. al., which provides a method for obtaining the information at a macroscopic level from multi-body collisions …


Reactive Modification Of Polyesters And Their Blends, Chen Wan Jan 2004

Reactive Modification Of Polyesters And Their Blends, Chen Wan

Dissertations

As part of a broader research effort to investigate the chemical modification of polyesters by reactive processing a low molecular weight (MW) unsaturated polyester (UP) and a higher MW saturated polyester, polyethylene terephthalate (PET), alone or blended with polypropylene (PP) were melt processed in a batch mixer and continuous twin screw extruders. Modification was monitored by on-line rheology and the products were characterized primarily by off-line rheology, morphology and thermal analysis. Efforts were made to establish processing/property relationships and provide an insight of the accompanying structural changes. The overall response of the reactively modified systems was found to be strongly …


Oblivious Data Hiding : A Practical Approach, Husrev T. Sencar Jan 2004

Oblivious Data Hiding : A Practical Approach, Husrev T. Sencar

Dissertations

This dissertation presents an in-depth study of oblivious data hiding with the emphasis on quantization based schemes. Three main issues are specifically addressed:

1. Theoretical and practical aspects of embedder-detector design.

2. Performance evaluation, and analysis of performance vs. complexity tradeoffs.

3. Some application specific implementations.

A communications framework based on channel adaptive encoding and channel independent decoding is proposed and interpreted in terms of oblivious data hiding problem. The duality between the suggested encoding-decoding scheme and practical embedding-detection schemes are examined. With this perspective, a formal treatment of the "processing" employed in quantization based hiding methods is presented. In …


Fabrication And Characterization Of Microcrystalline Silicon Solar Cells, Liwei Li Jan 2004

Fabrication And Characterization Of Microcrystalline Silicon Solar Cells, Liwei Li

Dissertations

In this study, single junction p-i-n μc-Si:H solar cells were prepared using plasma of silane diluted by hydrogen in a low-cost, single chamber, non-load-locked RF-PECVD system. Direct structural characterization of μc-Si:H solar cells, rather than stand-alone films, was conducted using Raman Spectroscopy, XRD, and AFM. Strong correlations among device deposition, i-layer structural properties, and device performance have been established. With such correlations, critical issues in fabricating low-cost, large-scale, high performance μc-Si:H solar cells were identified.

The critical importance of seeding processes in determining the microstructure of μc-Si:H i-layers and performance of μc-Si:H solar cells has been demonstrated. Using …


Studies On Improved Integrated Membrane-Based Chromatographic Process For Bioseparation, Yanke Xu Jan 2004

Studies On Improved Integrated Membrane-Based Chromatographic Process For Bioseparation, Yanke Xu

Dissertations

To improve protein separation and purification directly from a fermentation broth, a novel membrane filtration-cum-chromatography device configuration having a relatively impermeable coated zone near the hollow fiber module outlet has been developed. The integrated membrane filtration-cum-chromatography unit packed with chromatographic beads on the shell side of the hollow fiber unit enjoys the advantages of both membrane filtration and chromatography; it allows one to load the chromatographic media directly from the fermentation broth or lysate and separate the adsorbed proteins through the subsequent elution step in a cyclic process.

Interfacial polymerization was carried out to coat the bottom section of the …


The Use Of A Water Quality Model To Evaluate The Impacts Of Combined Sewer Overflows On The Lower Hudson River, Wen-Pin Shu Jan 2004

The Use Of A Water Quality Model To Evaluate The Impacts Of Combined Sewer Overflows On The Lower Hudson River, Wen-Pin Shu

Dissertations

CSO discharges have long been recognized as a significant source of water pollution. While many sources of water pollution have been controlled over the past 20 years, CSOs continue to be a main environmental concern in several areas, especially in old cities. In the past, most CSO research focused on the CSO control processes, including floatables and suspended solids removal. Few studies have been conducted in the area of the impacts of CSO discharge on the receiving water quality. To achieve this purpose, a powerful water-modeling tool, WASP 6.1, is utilized in this study. The Lower Hudson River is selected …


Vibration-Induced Densification Of Granule Materials, Ninghua Zhang Jan 2004

Vibration-Induced Densification Of Granule Materials, Ninghua Zhang

Dissertations

Physical experiments as well as discrete element simulations of vibration are carried out. The use of different amplitudes and frequencies are applied in the experiments to facilitate the observation of densification trends with mono-disperse acrylic spheres and multi-disperse polyethylene pellets. For mono-disperse acrylic spheres, four densification trends are found at different vibration conditions, and attaining the "maximum density" is closely related to the combination of vibration frequency and amplitude, in agreement with experiments in the literature. For multi-disperse polyethylene pellets, there is a substantial increase in solids fraction due to the effects of particle shape and surface friction. Computer simulations …


Multi-Spectral Light Interaction Modeling And Imaging Of Skin Lesions, Sachin Vidyanand Patwardhan Jan 2004

Multi-Spectral Light Interaction Modeling And Imaging Of Skin Lesions, Sachin Vidyanand Patwardhan

Dissertations

Nevoscope as a diagnostic tool for melanoma was evaluated using a white light source with promising results. Information about the lesion depth and its structure will further improve the sensitivity and specificity of melanoma diagnosis. Wavelength-dependent variable penetration power of monochromatic light in the trans-illumination imaging using the Nevoscope can be used to obtain this information. Optimal selection of wavelengths for multi-spectral imaging requires light-tissue interaction modeling. For this, three-dimensional wavelength dependent voxel-based models of skin lesions with different depths are proposed. A Monte Carlo simulation algorithm (MCSVL) is developed in MATLAB and the tissue models are simulated using the …


Ip-Based Virtual Private Networks And Proportional Quality Of Service Differentiation, Jingdi Zeng Jan 2004

Ip-Based Virtual Private Networks And Proportional Quality Of Service Differentiation, Jingdi Zeng

Dissertations

IP-based virtual private networks (VPNs) have the potential of delivering cost-effective, secure, and private network-like services. Having surveyed current enabling techniques, an overall picture of IP VPN implementations is presented.

In order to provision the equivalent quality of service (QoS) of legacy connection-oriented layer 2 VPNs (e.g., Frame Relay and ATM), IP VPNs have to overcome the intrinsically best effort characteristics of the Internet. Subsequently, a hierarchical QoS guarantee framework for IP VPNs is proposed, stitching together development progresses from recent research and engineering work.

To differentiate IP VPN QoS, the proportional QoS differentiation model, whose QoS specification granularity compromises …


Dielectrophoretic Manipulation Of Biological And Non-Biological Analytes In A Microfluidic Channel, Dawn J. Bennett Jan 2004

Dielectrophoretic Manipulation Of Biological And Non-Biological Analytes In A Microfluidic Channel, Dawn J. Bennett

Dissertations

Micro-total-analytical systems (μTASs) for analyzing chemical/biological substances are now used across a wide variety of applications ranging from biological warfare agent detection to the healthcare industry. The first step in the operation of a μTAS consists of concentrating and separating the analytes of interest from the background matrix and positioning them into selected locations for subsequent analysis. The use of ac electric fields was demonstrated to have promising potential for a μTAS because the application of an ac field suppresses undesirable electrolytic effects in the liquid. The main purpose of this work is to study micro-scale phenomena in a flowing …


Configurable Computer Systems Can Support Dataflow Computing, Anish Arvind Sathe Jan 2004

Configurable Computer Systems Can Support Dataflow Computing, Anish Arvind Sathe

Theses

This work presents a practical implementation of a uni-processor system design. This design, named D2-CPU, satisfies the pure data-driven paradigm, which is a radical alternative to the conventional von Neumann paradigm and exploits the instruction-level parallelism to its full extent. The D2-CPU uses the natural flow of the program, dataflow, by minimizing redundant instructions like fetch, store, and write back. This leads to a design with the better performance, lower power consumption and efficient use of the on-chip resources. This extraordinary performance is the result of a simple, pipelined and superscalar architecture with a very …


Modeling And Analysis Of Hospital Facility Layout Problem, Amol Shrikrishna Padgaonkar Jan 2004

Modeling And Analysis Of Hospital Facility Layout Problem, Amol Shrikrishna Padgaonkar

Theses

The optimal solution to any facility layout problem is an important aspect and a major concem as it involves significant material handling and transportation cost. The objective is to arrange the departments within the predefined facility boundaries in the way that the interaction between the functions is efficient and the overall movement cost is minimized. While facility layout problems have traditionally focused on manufacturing facilities, there has been little work on analyzing layouts for hospitals. The thesis focuses on hospital facility layout problems (HLP) to (i) minimize the movements of patients and (ii) minimize the movements of accompanying resources such …


Investigation Of Heart Rate Variability During Sleep Apnea, Sekar Subramanian Jan 2004

Investigation Of Heart Rate Variability During Sleep Apnea, Sekar Subramanian

Theses

Sleep apnea is a disorder, where there are repetitive pauses in respiratory flow of at least 10 seconds or longer duration, and which occur more than five times per hour. Apnea has strong modulating effects on the autonomic nervous system, with prominent heart rate variation. It can be assumed that during sleep, internal influences (sympathetic and parasympathetic nervous system activities) dominate the autonomic nervous system; in addition repetitive apneas are accompanied by a pronounced increase in average heart rate. The aim of this study was to investigate the heart rate variability using spectral analysis and time-frequency analysis during sleep apnea. …


Magneto-Rheological Fluid Orthosis For Suppressing Tremor, Hyoung-Joo Yeo Jan 2004

Magneto-Rheological Fluid Orthosis For Suppressing Tremor, Hyoung-Joo Yeo

Theses

Tremor is a common movement disorder that occurs with specific neurological conditions. This condition may seriously impact daily living activities. The aim of the present study is to evaluate the possibility of the development of a wearable technology that is capable of exerting torques at a user's joints for suppressing tremor.

This thesis is based on the concept of "smart structures" which are made of Magneto-Rheological (MR) fluid that can dynamically alter its viscosity under magnetic field. The wearable tremor suppressing orthosis needs several conditions. It should be safe, light weight, simple and small in structure, and easily attachable. An …


Adaptive Turn-Prohibition Routing Algorithm For The Networks Of Workstations, Amey Bhaskar Shevtekar Jan 2004

Adaptive Turn-Prohibition Routing Algorithm For The Networks Of Workstations, Amey Bhaskar Shevtekar

Theses

Deadlock occurrence is a critical problem for any computer network. Various solutions have been proposed over last two decades to solve problem of deadlocks in networks using different routing schemes, like up/down routing algorithm used in Myrinet switches. However, most of existing approaches for deadlock-free routing either try to eliminate any possibility of deadlock occurrence, which can result in putting extra restrictions on the routing in the networks or put no restrictions on routing, which leads to other approach namely deadlock recovery. In this thesis emphasis is on developing hybrid approach for routing in wormhole networks, wherein some prohibition is …


Pulsed Laser Ablation Deposition And Optical Characterization Of Hexagonal-Wurtzite Silicon, Berzelius Ybanez Cada Jan 2004

Pulsed Laser Ablation Deposition And Optical Characterization Of Hexagonal-Wurtzite Silicon, Berzelius Ybanez Cada

Theses

Hexagonal-wurtzite silicon phase silicon is an unusual polymorph of silicon with potentially useful electro-optical properties. Previous studies using a simple deposition system demonstrated that laser ablation of the standard cubic-diamond silicon produces droplets containing hexagonal-wurtzite crystallites. In order to study the process parameters and to deposit larger hexagonal crystals, a new pulsed laser ablation system with variable parameters was assembled and tested. Deposition expenments were performed in high vacuum with different laser pulse power. Raman spectroscopy showed that the new system successfully produces hexagonal-wurtzite silicon. The droplet size distributions, measured with an optical microscope, were found to depend on the …


Characterization Of Aluminum Powder Ignition, Salil Mohan Jan 2004

Characterization Of Aluminum Powder Ignition, Salil Mohan

Theses

Heating rate effect and particle size effect on ignition temperature of Al powder were studied to collect data for development of a possible Al powder ignition model. Aluminum ignition is associated with a highly accelerated burn rate and high combustion enthalpy. A new ignition model, which can adequately interpret these conditions, is needed to develop better propulsion fuels, explosives and incendiaries that use Al as an additive. This experimental program was focused on preparing framework for characterization of ignition kinetics of Al powder by determining the ignition temperature for different, systematically varied, heating rates and particle size. The experimental setup …


Kinetics Of Ho2 Abstraction Of H Atoms From Hydrocarbons And Thermochemical Properties Of Urethane Monomers And Radicals, Rajul Shah Jan 2004

Kinetics Of Ho2 Abstraction Of H Atoms From Hydrocarbons And Thermochemical Properties Of Urethane Monomers And Radicals, Rajul Shah

Theses

SECTION I: Kinetics of HO2 Abstraction of H Atoms From Hydrocarbons

Structures, internal rotational barriers and ideal gas thermochemical properties, ΔH°f98 for representative series of transition states for abstraction of H atoms from primary, secondary and tertiary hydrocarbons by the HO2 radical, TC-HOOH (1), TCC-HOOH (2), TC2C-HOOH (3), TC3C-HOOH (4), TC2CC-HOOH (5), TC2CC-HOOHC (6) and TC3CCC-HOOH (7) are analyzed in this study. Molecular structures and vibrational frequencies are determined at the B3LYP/6-3111G(d,p) density functional level. The S°298 and Cp(T) values (300≤T/K≤1500) from vibrational, …


Combustion Of Aerosolized Spherical Aluminum Powders And Flakes In Air, Binu Zacharia Eapen Jan 2004

Combustion Of Aerosolized Spherical Aluminum Powders And Flakes In Air, Binu Zacharia Eapen

Theses

Combustion rates and completeness of aerosolized spherical aluminum powders and flakes are compared using constant volume explosion experiments. The comparison of particles and flake sizes was made based on their specific surface areas determined using the Brunauer-Emmett-Teller (BET) method and respective "BET diameters". It is observed that the rates of pressure rise and rates of flame propagation were higher for aluminum powders with BET diameters of about 2 to 5 μm compared to aluminum flakes for which the BET diameters were under 1 μm In agreement with the flame propagation rates, the overall completeness of combustion was also higher for …


A Labview Program To Obtain The Initiating Component Of A Vergence Eye Movement In An Open-Loop Experiment, Anuj P. Daftari Jan 2004

A Labview Program To Obtain The Initiating Component Of A Vergence Eye Movement In An Open-Loop Experiment, Anuj P. Daftari

Theses

The vergence oculomotor system is used in viewing objects moving in depth, such as when a baseball player tracks a ball moving towards him. It is composed of two components according to the Dual Mode Theory; a fast preprogrammed initiating component and a slow feedback-controlled sustaining component. The initiating component is described with open-loop control and the sustaining component is described as a closed-loop feedback control system. Previously, several languages have been utilized to develop programs to study and isolate the open-loop portion of vergence eye movements. Presenting a subject with a stimulus, which initiates an open-loop response has been …


Development Of Fmri Compatible Lower Body Negative Pressure System, Pratap Singh Kunwar Jan 2004

Development Of Fmri Compatible Lower Body Negative Pressure System, Pratap Singh Kunwar

Theses

The lower body negative pressure (LBNP) system provides a controlled, measured orthostatic stress to the cardiovascular system, which can be used with a magnetic resonance imaging (MRI) machine to study cardiovascular and cerebrovascular responses to graded LBNP. In the past, even though functional MRI (fMRI) was considered as one of the best modalities with which to measure small metabolic changes in the brain, it has not been used with an LBNP system to measure cerebrovascular changes. This was due to the lack of an fMRI compatible LBNP system.

In this project, an tMRI compatible LBNP system was first constructed without …


Evaluation Of Postural Stability Using Sensory Organization Test, Tiffany Sims Jan 2004

Evaluation Of Postural Stability Using Sensory Organization Test, Tiffany Sims

Theses

Poor postural stability of the elderly and other patients has been a major concern.The cost of treating injuries due to poor stability is expected to rise to $32.4 Billion by 2020. Many interventions have been proposed and used to improve stability. In order to determine the efficacy of these interventions, an objective evaluation of postural stability before and after intervention is important.

The aim of this thesis was to scientifically analyze the ambiguities in the equilibrium score (ES) given by the Neurocom Smart Equitest (NSE) machine, and compare it to a new measure of stability that has been proposed by …


Wavelet Transform Methods For Identifying Onset Of Semg Activity, Janina Wilen Jan 2004

Wavelet Transform Methods For Identifying Onset Of Semg Activity, Janina Wilen

Theses

Quantifying improvements in motor control is predicated on the accurate identification of the onset of surface electromyograpic (sEMG) activity. Applying methods from wavelet theory developed in the past decade to digitized signals, a robust algorithm has been designed for use with sEMG collected during reaching tasks executed with the less-affected arm of stroke patients. The method applied both Discretized Continuous Wavelet Transforms (CWT) and Discrete Wavelet Transforms (DWT) for event detection and no-lag filtering, respectively. Input parameters were extracted from the assessed signals.

The onset times found in the sEMG signals using the wavelet method were compared with physiological instants …


Chemical Vapor Deposition Of Polymeric Films, Chi Yu Jan 2004

Chemical Vapor Deposition Of Polymeric Films, Chi Yu

Theses

Poly-peri-naphthalene (PPN) is a one-dimensional (1 -D) graphite polymer with unique planar ladder-like conjugated molecular structure. PPN was predicted to be a good intrinsic conductor and have high thermal stability and high environmental stability.

In this project, chemical vapor deposition (CVD) and plasma enhanced chemical vapor deposition (PECVD) of carbon films with PPN structure using PTCDA as precursor were carried out under different conditions. There is only limited information in literature on the synthesis of PPN films by PECVD process, which may allow deposition at a higher rate with lower substrate temperature. In this work the influence of deposition parameters, …


Transmission Of Light And Audible Sound In A Synthetic Fog Medium, Bhavin Babaria Jan 2004

Transmission Of Light And Audible Sound In A Synthetic Fog Medium, Bhavin Babaria

Theses

The primary goal of the thesis was to study the propagation of visible light and auditory sound through a synthetic fog medium compared to an ambient air environment. It is known that the fog substantially decreases the visibility however; this has not been studied quantitatively. Further information regarding other energies such as sound is also needed to understand how the energy reacts in the fog medium. The extent of visual and auditory degradation in humans needs to be investigated. Researchers have studied light transmitted through water, air; however, no one has studied how light or sound is transmitted through a …


Simultaneous Heat And Mass Transfer To A Liquid Through Two Separated Interfaces, Ku-Il Park Jan 2004

Simultaneous Heat And Mass Transfer To A Liquid Through Two Separated Interfaces, Ku-Il Park

Theses

The oxygenator is the main element of a heart-lung machine, which takes over the work of the lungs (adding oxygen to and removing carbon dioxide from the blood) during an operation. Oxygenators function by passing oxygen through a hollow fiber (straw-like fiber), where blood gases are exchanged via tiny pores in the fiber walls. In this study, a fiber-in-fiber technology was used to design a temperature controlled blood oxygenator membrane module. A Celgard® X-10 hollow fiber was put through the lumen of a polypropylene hollow fiber having a solid wall. Both fibers are made of polypropylene and are waterproof due …