Engineering Commons^™

Shape Memory Alloy Capsule Micropump For Drug Delivery Applications, Youssef Mohamed Kotb

Theses and Dissertations

Implantable drug delivery devices have many benefits over traditional drug administration techniques and have attracted a lot of attention in recent years. By delivering the medication directly to the tissue, they enable the use of larger localized concentrations, enhancing the efficacy of the treatment. Passive-release drug delivery systems, one of the various ways to provide medication, are great inventions. However, they cannot dispense the medication on demand since they are nonprogrammable. Therefore, active actuators are more advantageous in delivery applications. Smart material actuators, however, have greatly increased in popularity for manufacturing wearable and implantable micropumps due to their high energy …

Physical Effects On The Worst-Case Delay Analysis And Signal Integrity Of Buses And Spirals, Mahmoud Mahany

Theses and Dissertations

Physical effects have a significant impact on the IC design which will be investigated in this thesis. Moving toward advanced technology nodes, magnetic effects become more dominant than capacitive effects. As the dimensions of the devices go down and the interconnect manipulates the circuit behavior more and more. Cross talking and voltage drops are affecting the design heavily, however - going to the full electromagnetic point of view - current return path (CRP) adds significant parasitics to the performance of the chip. Neglecting the CRP gives wrong intuition and simulation of the designs, especially that the environment and surroundings can …

Prediction Of Distresses In Pavement Networks: A Machine Learning Approach, Mahmoud Kotb

Theses and Dissertations

The quality of pavement networks is greatly affected by different distresses. These distresses appear in many forms, such as cracking, potholes, rutting and different types of deformation. As a result, to ensure effective pavement management, accurate modeling of these different distresses has become essential. Moreover, machine learning models have shown great potential in modeling pavement performance in recent years. The objective of this research is to develop machine learning models for modeling key parameters of pavement distress, specifically the International Roughness Index (IRI), fatigue and longitudinal cracking. Data for this investigation were extracted from the Long-Term Pavement Performance (LTPP) database, …

Assessing Adoption Barriers Of Sustainable Packaging In Egypt, Carol Ramses Morgan

Theses and Dissertations

Sustainable packaging has become an essential part of business decisions and corporate directions. With the rise of environmental damages due to improper waste management and unsustainable practices, businesses have a major responsibility to analyze their products’ life cycles and redesign them with sustainability in mind. Applying sustainable packaging could save companies large amounts of resources, therefore cutting costs, while also achieving the legal and social duty as a corporation towards society and the environment. Many developing countries, with specific focus on Egypt, have recently focused on legislative and corporate decisions in order to encourage more sustainable practices. Egypt’s new Waste …

Properties Of Portland Cement Concrete Incorporating Basalt-Based Pozzolanic Cement, Rana Khalil

Theses and Dissertations

Over the last decade, the world's population has increased dramatically. Due to this growth, the demand for concrete and Portland cement, in return, have increased. Manufacturing of Portland cement is an energy-intensive process that, alone, contributes to about 8% of global CO2. For decades, efforts have been exerted to reduce the harmful environmental impacts of Portland cement by reducing its use in concrete as well as considering alternate binders that may fully or partially replace it. This study aims to assess the properties of concrete incorporating a novel basalt-based pozzolanic cement. To meet this objective, four sets of concrete mixtures …

Consumers' Acceptance To Buy And Dispose Of Recycling Textile Products, Roa Alsayed

Theses and Dissertations

The textile industry is the second most polluting worldwide, following food manufacturing. It is one of the industries that is rarely scrutinized in the Middle East and North Africa (MENA) region. This work analyzes the fashion industry from the perspective of consumer attitudes towards the purchase and disposal of clothing, and their behavior with regards to old garments. The study was conducted in Saudi Arabia and Egypt, two countries that achieved similar results in the fashion industry. The methodology is divided into three phases. First, the manuscript begins with a review of topics such as sustainability, consumer behavior in the …

Applicability Of Using Bio-Receptive Concrete For Building Facades In Egypt, Gina Roupheil

Theses and Dissertations

The significant increase in carbon dioxide emissions caused by the construction industry is detrimental to our planet. This is rapidly increasing with the urbanization of cities that is gradually taking its toll on the available green spaces, which help in balancing such emissions. Recently, researchers have been trying to make use of bio-receptivity to create biomaterial systems that could be spread on building envelopes and support the growth of small plant species and microorganisms to establish on. Out of those materials, comes the concrete as a promising material for bio-colonization.

Within this context, this study aims at investigating the applicability …

Developing And Forecasting The Egyptian Construction Cost Index, Mayada Elsaied

Theses and Dissertations

Accurate cost estimation is pivotal for the success of construction projects, yet the industry grapples with challenges related to cost overruns. Uncertainties and unforeseen variables often introduce discrepancies, particularly during the planning phase. Economic changes, considered uncontrollable risks, significantly influence these fluctuations. Various research endeavors have quantified the impact of economic conditions on construction costs, emphasizing the correlation between economic indicators and project expenses. Addressing these challenges, the Construction Cost Index (CCI), a tool introduced by Engineering News Record (ENR), accurately delineates the correlation between economic changes and construction costs. Despite its global efficacy, an Egyptian Construction Cost Index is …

Fair Fault-Tolerant Approach For Access Point Failures In Networked Control System Greenhouses, Mohammed Ali Yaslam Ba Humaish

Theses and Dissertations

Greenhouse Networked Control Systems (NCS) are popular applications in modern agriculture due to their ability to monitor and control various environmental factors that can affect crop growth and quality. However, designing and operating a greenhouse in the context of NCS could be challenging due to the need for highly available and cost-efficient systems. This thesis presents a design methodology for greenhouse NCS that addresses these challenges, offering a framework to optimize crop productivity, minimize costs, and improve system availability and reliability. It contributes several innovations to the field of greenhouse NCS design. For example, it recommends using the 2.4GHz frequency …

A 3d Imaging-Based Critique Of Wire Arc Additive Manufacturing (Waam) Simulations, Omar Oraby

Theses and Dissertations

Residual stresses play a critical role in the mechanical behavior and structural integrity of engineered components. Understanding and quantifying these stresses are essential for ensuring the reliable performance and durability of materials and structures. Traditionally destructive methods are used that involve sample sectioning and material removal. However, non-destructive methods have gained popularity due to their advantages in preserving the specimen's integrity for further testing and material waste reduction. Among these techniques, Digital Image Correlation (DIC) stands out as a powerful non-contact and full-field measurement approach. DIC captures displacements and strain distributions by analyzing the deformation of speckle patterns on the …

Development Of An Electromagnetic System For Wireless Magnetic Manipulation Of Soft Capsule Endoscope For Drug Delivery Applications, Nada Ashraf Hussein Mahmoud

Theses and Dissertations

Wireless capsule endoscopy (WCE) is a remarkable diagnostic device that examines the gastrointestinal (GI) tract. The WCE is a small capsule integrated with a camera that is used to visualize the inner mucosa of the GI tract. WCE has been proven to be the most effective method to diagnose GI diseases and GI cancers. The procedure reduces the discomfort and risk compared to conventional endoscopy methods. However, current WCEs lack the ability to take a biopsy or deliver a drug to a specific location. Those therapeutic functions can be introduced by wirelessly controlled WCEs. This thesis introduces an electromagnetic system …

Study Of Vortices Formation In Lateral Intakes Of Pumping Stations, Muhammad Elgindi

Theses and Dissertations

The inefficient design of pumping stations leads to undesirable flow characteristics and the formation of vortices in the sump. These undesirable flow features adversely affect the pumping unit performance and increase the operation and maintenance cost. The aim of this thesis is to assess the ability of the Realizable turbulence model to predict the formation of free-surface and submerged vortices within lateral pumping stations’ intakes. Additionally, the study aims to investigate the effect of the flow ratio and bottom clearance on the flow characteristics and the vortices formation in the sump. Finally, the study introduces an assessment of curtain walls …

Optimization Of Vibro-Seismic Parameters For Enhanced Oil Recovery Application, Tarek Abdel Aal

Theses and Dissertations

This thesis was conducted in the American University in Cairo by Tarek Ahmed Abdel Fattah Abdel Aal. The thesis is titled ‘Optimization of Vibroseismic Parameters for Enhanced Oil Recovery Application.’ The thesis discusses whether or not the combination of optimized physical vibration parameters with waterflooding would improve porosity, absolute permeability, relative permeability, and recovery when compared with just classical waterflooding. The optimized physical vibration parameters as well as methodology was used from a previous paper that was performed in conjunction with my thesis advisor on similar core samples. The experimentation was performed on five core samples with different porosities and …

Integrated Project Delivery (Ipd): A Contractual Framework For The Egyptian Construction Industry, Sarah Hussain

Theses and Dissertations

This abstract highlight the significant findings and contributions of the study, which aimed to develop model clauses specifically tailored to the Egyptian construction industry for multi-party construction contracts. The research methodology encompassed several key components. Firstly, a comprehensive literature review was conducted to explore the various construction delivery methods prevalent in Egypt. This review provided a solid foundation for understanding the existing practices and identifying areas for improvement. The study also delved into the concept of Integrated Project Delivery (IPD) and its potential benefits as well as an analysis of the commonly used standard forms of contract and successful case …

Borophene And Graphene For Non-Enzymatic Biosensor- Ab-Initio Study, Omar A. Ismail

Theses and Dissertations

Non-enzymatic glucose sensing holds promise to overcome limitations associated with glucose oxidase, such as oxygen dependence and short shelf life. This study explores the potential sensing capabilities of borophene and graphene through direct interaction with various compounds, including β-glucose, uric acid, ascorbic acid, fructose, and acetaminophen. Using Density Functional Theory (DFT), we calculated binding energies and the respective Density of States (DOS) for these adsorbates on both graphene and borophene surfaces. Preliminary results suggest that borophene might exhibit nearly twice the affinity for β-glucose compared to graphene. Moreover, the calculated Density of States reveals distinct distortions in the electronic states …

From Waste To Energy: The Electrochemical Reduction Of Co2 Using Recycled Nanostructured Catalysts, Ibrahim Badawy

Theses and Dissertations

The reduction of carbon dioxide (CO₂RR) using electrochemistry is a promising solution for the burgeoning global energy crisis. The overall vision of its implementation relies on renewable energy sources to power the reaction creating carbon neutral products and effectively closing the carbon cycle. Research in this field has come a long way since its inception in the mid-1900s. However, there remain significant hurdles and important considerations to overcome in order to reach full commercialization. Most electrocatalysts tested for CO₂RR have been designed solely for maximum performance while ignoring the environmental consequences if such a material were …

Optimizing Repayment Strategies For Egyptian Construction Companies With Multiple Loans, Moataz Elkady

Theses and Dissertations

Optimizing Repayment Strategies for Egyptian Construction Companies with Multiple Loans is of utmost importance to efficiently allocate monthly income for loan repayment. The conventional practice of paying the minimum balance due each month leads to increased interest charges and prolonged repayment periods. In response, this research proposes a model for multiple loan repayment that considers the computational complexity involved.

The model is built on the foundation of mixed integer linear programming and aims to establish an optimal repayment schedule by minimizing the total cash required to repay the loans, prioritizing the repayment of loans before personal expenses. The implementation of …

Influence Of Organizational Culture And Leadership Style On Disputes In Construction Projects – A Contractor’S Perspective, Omneya Nader Mekhaimer

Theses and Dissertations

Over the recent decades, studies on organizational culture and leadership practices have gained global attention across business management literature given their implicit influence on the organization’s success. However, very few studies tackled these practices in the construction industry research especially in Egypt. Unlike other industries, the construction industry is known to be a complex, dynamic, and adversarial industry sector due to its project-oriented nature where various stakeholders are involved and each have their own objectives. Consequently, construction disputes are inevitable to occur whereby previous studies revealed that the level of disputes have propagated throughout the years.

This research aims to …

Spatial Autocorrelation Analysis For Construction Sites, Raghda Moharram

Theses and Dissertations

This study investigates the usefulness of spatial autocorrelation analysis in construction sites. The objective is to provide construction managers with insights into the site's performance, identify potential areas for improvement, and ultimately lead to cost and time savings and improved project quality. To achieve this objective, the study identifies significant spatial autocorrelation variables for various applications in construction and analyzes their impact on the site's efficiency and potential problems.

The potential applications where spatial autocorrelation analysis could be useful were identified, including schedules, progress, earned value measures, safety incidents, workers' densities, equipment densities, energy expenditure, and quality non-conformity. A framework …

Stochastic Worst-Case Test Vectors For Asic Devices In Single Event Environment, Mostafa Hemeda

Theses and Dissertations

Charged particles and energetic particles can impact the integrated circuit, referred to as single event effects (SEE). Nuclear reactors and space radiation can produce these particles. These effects can negatively affect the reliability and performance of electronics. When SEE occurs, a transient current is created, which can cause electronic devices to have incorrect outputs and ultimately fail. As a result, ensuring the reliability of ASIC circuits is a significant concern.

This thesis discusses the different fault types, then discuss the soft error and, in particular, the Single Event Transient (SET) and its causes and models. Then, this thesis proposes a …

Resources Based Planning Framework For Infrastructure Maintenance And Rehabilitation Projects, Heba Gad

Theses and Dissertations

Infrastructure maintenance and rehabilitation projects involve activities scattered over a large geographical area (e.g., scattered road segments maintenance, telecom towers maintenance program, etc.). Planning such projects require a resource-based approach that accounts for the implications of resource mobility between activities’ locations in terms of time & cost. Existing scheduling techniques fall short of addressing the unique challenges of the scattered nature of these projects in combination with organization's limited resources availability. To address this need, this research presents a resources-based planning framework for infrastructure maintenance and rehabilitation scattered projects with the objective of enhancing resources utilization achieving time and cost …

User Profiling Through Zero-Permission Sensors And Machine Learning, Ahmed Elhussiny

Theses and Dissertations

With the rise of mobile and pervasive computing, users are often ingesting content on the go. Services are constantly competing for attention in a very crowded field. It is only logical that users would allot their attention to the services that are most likely to adapt to their needs and interests. This matter becomes trivial when users create accounts and explicitly inform the services of their demographics and interests. Unfortunately, due to privacy and security concerns, and due to the fast nature of computing today, users see the registration process as an unnecessary hurdle to bypass, effectively refusing to provide …

A Novel Approach Using Integrated Greywater Treatment System Applying Net Zero Wastewater Concept For Sustainable Urban Communities, Mianda Khattab

Theses and Dissertations

We are blessed with endless resources that are naturally existing in our world and we fully rely-on without envisioning the bigger picture of what would happen if these resources came to an end, or how can we even ensure sustainable lives by regenerating or reusing or utilizing the naturally existing resources? The surrounding ecosystem, the land we live on, the air we breathe, the water we drink and use for cooking, laundry, shower, irrigation, and many other usages are examples of the resources that we, as global users, are taking for granted.

It is a common knowledge that we are …

Role Of Defect Type In Optimizing Photoelectrochemical Hydrogen Production Catalysts, Mohamed Mahrous

Theses and Dissertations

The search for new energy sources has become a global challenge due to the increasing demand for energy and the negative impact of traditional energy sources on the environment. The photoelectrochemical water splitting has emerged as a promising alternative source for producing hydrogen, which can be used as a clean fuel. However, it is necessary to tailor the properties of the light-active material that will be used to absorb sunlight and split water. This research project aimed at providing detailed insights into the effect of varying the type and concentration of defects on the optical and electronic properties of diamond …

Additive Manufacturing Of Stretchable Strain Sensors: Fabrication, Optimization And Application, John Nady Shihat Bastawrous

Theses and Dissertations

In this project, a novel strain sensor design is fabricated employing different additive manufacturing techniques. The spring sensor's primary material is PLA-Like resin with a nanocomposite encapsulation layer as the functional material. The main principle of Straining the sensors results in a change in resistivity as the distances among the conductive carbon particles change according to the strain applied.

Sensor fabrication consists of two parts: spring manufacturing and development of nanocomposite encapsulation The nanocomposite matrix is developed through the dispersion of Graphene and Carbon nanotubes in Thermoplastic Polyurethane through sonication and magnetic hotplate stirring. While the spring itself is manufactured …

Mixed-Criticality Scheduling Using Reinforcement Learning, Omar Elseadawy

Theses and Dissertations

Mixed-criticality (MC) scheduling is necessary for many safety-critical real-time embedded systems, as a failure of high-criticality jobs could lead to fatal accidents. With the emergence of software technologies in software-defined vehicles in the automotive and avionics industries, studying Mixed-Critically (MC) systems is essential to their safety standards, similar to ISO26262. The real-time operation of MC systems makes it an inherently online problem, such that the scheduler is only aware of the jobs that are currently released at any point in time and has no knowledge of future jobs. Due to the overhead cost of preemption, this study focuses on enforcing …

Computational Study On The Acoustic Footprint Of Stenosis In Larger Arteries, Ahmed Abdelnabi

Theses and Dissertations

We identify a new (acoustic) frequency-stenosis relations whose frequencies fall within the recommended auscultation threshold for stethoscopy (< 120 Hz) in this study. We demonstrate that these relations can be used to extend the application of phonoangiography (the measurement of the degree of stenosis from bruits) to stethoscopes that are broadly available. The First relationship is successfully identified using an analysis limited to the acoustic signature of the von Karman vortex street, which we automatically isolate using a metric based on an area-weighted average of the Q-criteria for the post-stenotic region. Specifically, we conduct LES-CFD simulations on simplified 2D internal flow geometries that represent blood vessels with varying degrees of stenosis. Then, using the Ffowcs Williams-Hawkings (FW-H) equation, we extract their emitted acoustic signals, which we subtract from a pure signal (stenosis-free) at the same heart rate. Next, we transform this differential signal to the frequency domain and meticulously classify its acoustic signatures according to six stenosis-invariant flow phases of a cardiac cycle. Using our Q-criterion-based metric, we then automatically restrict our acoustic analysis to the noises emitted by the von Karman vortex street (phase 4). Our analysis of its acoustic signature demonstrates a strong linear relationship between the degree of steno- sis and its dominant frequency, which differs significantly from the break frequency and heart rate (previously identified dominant frequencies). For the Second relationship, we develop a frequency-stenosis scaling law for particularly supravalvular aortic stenosis that falls within the preferred frequency range (30-120 Hz) for echocardiography. We expand to 3D patient specific geometry using Simulia’s Living Heart Human Model (LHHM), which has an anatomically accurate aorta geometry. This LHHM geometry is modified with stenoses ranging from 30 to 80 percent (moderate to severe). For physiologically consistent hemodynamic boundary conditions, we expand the study to employ the Windkessel model, which has been implemented on Fluent using UDF. We demonstrate that physiological boundary conditions reduce simulation time significantly compared to static boundary conditions. The FW-H model extracted the flow-generated acoustic signal of the stenotic geometries and analysed it at clinically relevant receiver locations. A preferred receiver location consistent with clinical practise is determined, and a correlation between the degree of stenosis and the prevalent acoustic frequency (within the frequency range of 70-120 Hz) is established. The obtained second scaling law is shown to be clinically reliable in assessing stenotic severity. Future research will investigate incorporating the vibroacoustic role of adjacent organs and tissue to expand the clinical applicability of our findings. Expansion of clinical and numerical datasets will be pursued in future research to enhance the reliability of our scaling law, possibly by leveraging much-needed ML-based acceleration schemes.

Enhancing Construction Safety Training Of Bridges Using Augmented Reality And Virtual Reality, Mohamed Sherif Elrifaee

Theses and Dissertations

Infrastructure development projects are widely acknowledged as some of the most complex and challenging projects to undertake. The construction of bridges, in particular, has proven to be a significant safety risk for workers, with a considerable number of accidents reported on construction sites. There is a lack of comprehensive training programs specifically designed for bridge construction safety, and only a few studies have explored the use of both AR and VR to enhance safety training in construction. As such, this research aims to improve the safety of bridge construction sites through the implementation of Augmented Reality (AR) and Virtual Reality …

The Feasibility Of Using High Strength Stainless Steel In Pre-Stressing Applications, Rana Khaled Morsy

Theses and Dissertations

This paper evaluates the applicability of using a corrosion-resistant reinforcement high strength stainless steel strands (HSSS) Duplex 2205 in pre-stressing applications. HSSS-Duplex 2205 is a high performance steel which can be used as an alternative to the conventional carbon steel strands, for a better service life. The high strength and corrosion resistance of the material allows it to show its impressive performance in marine structural applications. Although the use of HSSS-Duplex 2205 could be initially costly; however, the improved durability and extended service life of the concrete structures using HSSS would require less life-cycle cost. Although there is a gap …

Chemical Vapor Deposition Grown Monolayer Graphene Microsensors With Rf Ring Oscillator Backend Circuit, Mohamed Ahmed Waheed Tawfik

Theses and Dissertations

This work presents the integration of a backend RF ring oscillator readout circuit to transduce structural changes in CVD-grown monolayer graphene into an electrical signal and the implementation of it to detect physical changes such as radiation and flexural strain. The novelty in this work lies in the following (1) the ability of the sensor platform to overcome environmental effects, such as light photons and temperature changes, through the readout circuit, and (2) it opens the door for the scalability of CVD-grown graphene-based for sensors and devices. Thus, the introduced sensors solve several downsides in the state-of-the-art graphene-based radiation and …