Engineering Commons^™

Models And Machine Learning Techniques For Improving The Planning And Operation Of Electricity Systems In Developing Regions, Santiago Correa Cardona

Doctoral Dissertations

The enormous innovation in computational intelligence has disrupted the traditional ways we solve the main problems of our society and allowed us to make more data-informed decisions. Energy systems and the ways we deliver electricity are not exceptions to this trend: cheap and pervasive sensing systems and new communication technologies have enabled the collection of large amounts of data that are being used to monitor and predict in real-time the behavior of this infrastructure. Bringing intelligence to the power grid creates many opportunities to integrate new renewable energy sources more efficiently, facilitate grid planning and expansion, improve reliability, optimize electricity …

Improving The Programmability Of Networked Energy Systems, Noman Bashir

Doctoral Dissertations

Global warming and climate change have underscored the need for designing sustainable energy systems. Sustainable energy systems, e.g., smart grids, green data centers, differ from the traditional systems in significant ways and present unique challenges to system designers and operators. First, intermittent renewable energy resources power these systems, which break the notion of infinite, reliable, and controllable power supply. Second, these systems come in varying sizes, spanning over large geographical regions. The control of these dispersed and diverse systems raises scalability challenges. Third, the performance modeling and fault detection in sustainable energy systems is still an active research area. Finally, …

X-Band Phased-Array Weather-Radar Polarimetry Testbed, William Heberling Iv

Doctoral Dissertations

Phased-array weather radar have potential to replace reflector dish radar in major weather radar networks such as NEXRAD, providing faster update times and greater scan flexibility. However, the use of electronic scanning introduces polarization errors on weather radar measurables, requiring polarimetric bias calibration. The sources of polarimetric bias have been described theoretically, but experimental verification is still limited. Additionally, no standard method of calibration for polarimetric bias exists for phased-arrays. Therefore, the University of Massachusetts Amherst (UMass) presents a fully operational X-Band phased-array weather radar polarimetric testbed. The testbed evaluates the calibration of a planar dual-polarization X-band phased-array radar through …

Tokamak 3d Heat Load Investigations Using An Integrated Simulation Framework, Thomas Looby

Doctoral Dissertations

Reactor class nuclear fusion tokamaks will be inherently complex. Thousands of interconnected systems that span orders of magnitude in physical scale must operate cohesively for the machine to function. Because these reactor class tokamaks are all in an early design stage, it is difficult to quantify exactly how each subsystem will act within the context of the greater systems. Therefore, to predict the engineering parameters necessary to design the machine, simulation frameworks that can model individual systems as well as the interfaced systems are necessary. This dissertation outlines a novel framework developed to couple otherwise disparate computational domains together into …

Model Based Force Estimation And Stiffness Control For Continuum Robots, Vincent A. Aloi

Doctoral Dissertations

Continuum Robots are bio-inspired structures that mimic the motion of snakes, elephant trunks, octopus tentacles, etc. With good design, these robots can be naturally compliant and miniaturizable, which makes Continuum Robots ideal for traversing narrow complex environments. Their flexible design, however, prevents us from using traditional methods for controlling and estimating loading on rigid link robots.

In the first thrust of this research, we provided a novel stiffness control law that alters the behavior of an end effector during contact. This controller is applicable to any continuum robot where a method for sensing or estimating tip forces and pose exists. …

Design And Development Of The Urban Population Health Observatory To Improve Disease Surveillance And Response, Whitney Brakefield

Doctoral Dissertations

Chronic and infectious diseases have a profound impact on the quality and length of life of populations that suffer from these conditions. Scientists, physicians, and health officials are seeking innovative approaches to decrease the morbidity and mortality of deadly diseases. Incorporating artificial intelligence and data science techniques across the health science domain could improve disease surveillance, intervention planning, and policymaking. In this dissertation, we describe the design and development of the Urban Population Health Observatory (UPHO), an explainable knowledge-based multimodal big data analytics platform. A common challenge for conducting multimodal big data analytics is integrating multidimensional heterogeneous data sources, which …

Chiral Mesogen-Free Liquid Crystalline Polyethers With Sulfonylated Side Chains And Patchy Brush Nanoparticles, Caleb A. Bohannon

Doctoral Dissertations

Ferroelectric liquid crystalline polymers (LCPs) hold promise for various applications driven by low electric fields, e.g., electrocaloric materials, because of the higher molecular motion in the liquid crystalline (LC) state. However, traditional chiral smectic C (SmC*) LCPs exhibit small spontaneous polarizations due to the bulky aromatic mesogens and weak polar groups. This dissertation research is focused on the design of mesogen-free sulfonylated LCPs with a goal of seeking the ferroelectric SmC* phase. Such LCPs are expected to exhibit high polarizations owing to the sulfonyl’s large dipole moment. A series of poly(oxypropylene)s (POPs), with chirality being introduced into either the backbone …

A High Rate Pixelated Neutron Detector For Neutron Reflectometry At The Spallation Neutron Source, Su-Ann Chong

Doctoral Dissertations

This work presents the development of a high-rate 6Li-based pixelated neutron detector for neutron reflectometry instruments at the Spallation Neutron Source (SNS), Oak Ridge National Laboratory. The current detector technology falls short on the instrument requirements, particularly on the counting rate capability. This detector was designed specifically to overcome the limitation in counting rate by having a fully pixelated design from neutron conversion layer to photodetector and readout system. For the neutron converting layer, a 6Li-based neutron scintillator was used. Each scintillator element was coupled to a photodetector, in this case, a silicon photomultiplier (SiPM). The output of each SiPM …

Modeling Chain Packing In Complex Phases Of Self-Assembled Block Copolymers, Anugu Abhiram Reddy

Doctoral Dissertations

Block copolymer (BCP) melts undergo microphase seperation and form ordered soft matter crystals with varying domain shapes and symmetries. We study the con- nection between diblock copolymer molecular designs and thermodynamic selection of ordered crystals by modeling features of variable sub-domain geometry filled with individual blocks within non-canonical sphere-like and network phases that together with layered, cylindrical and canonical spherical phases forms “natural forms” of self- assembled amphiphilic soft matter at large. First, we present a model to revise our understanding of optimal Frank-Kasper sphere-like morphologies by advancing the- ory to account for varying domain volumes. We then develop generic …

Moving Polygon Methods For Incompressible Fluid Dynamics, Chris Chartrand

Doctoral Dissertations

Hybrid particle-mesh numerical approaches are proposed to solve incompressible fluid flows. The methods discussed in this work consist of a collection of particles each wrapped in their own polygon mesh cell, which then move through the domain as the flow evolves. Variables such as pressure, velocity, mass, and momentum are located either on the mesh or on the particles themselves, depending on the specific algorithm described, and each will be shown to have its own advantages and disadvantages. This work explores what is required to obtain local conservation of mass, momentum, and convergence for the velocity and pressure in a …

Decision-Analytic Models Using Reinforcement Learning To Inform Dynamic Sequential Decisions In Public Policy, Seyedeh Nazanin Khatami

Doctoral Dissertations

We developed decision-analytic models specifically suited for long-term sequential decision-making in the context of large-scale dynamic stochastic systems, focusing on public policy investment decisions. We found that while machine learning and artificial intelligence algorithms provide the most suitable frameworks for such analyses, multiple challenges arise in its successful adaptation. We address three specific challenges in two public sectors, public health and climate policy, through the following three essays. In Essay I, we developed a reinforcement learning (RL) model to identify optimal sequence of testing and retention-in-care interventions to inform the national strategic plan “Ending the HIV Epidemic in the US”. …

Synthesis, Fabrication, And Assembly Of Mesoscale Polymer Filaments, Dylan M. Barber

Doctoral Dissertations

Mesoscale materials, with feature sizes in the range of one hundred nanometers to tens of micrometers, are ubiquitous in Nature. In organisms, mesoscale building blocks connect the properties of underlying molecular and nanoscructures to those of macroscale, organism-scale materials through hierarchical assemblies of recurring structural motifs. The collective action of large numbers of mesoscale features can afford stunning features like the structural color of the morpho butterfly wing, calcium ion-mediated movement in muscle, and wood structures like xylem that can support enormous external compressive loads and negative internal pressure to transport nutrients throughout an organism. In synthetic systems, the design, …

Designing Nonflammable Polymers And Blends Containing Deoxybenzoin Derivatives, Elizabeth Stubbs

Doctoral Dissertations

The importance of synthetic polymers in everyday life continues to grow, owing to their societal importance for improving our standard-of-living and enabling advances spanning medicine, electronics, construction materials, transportation. While niche applications occupy a small fraction of the overall volume of polymers produced, large scale applications tend to employ lower cost materials, such as polyethylene, polypropylene, and polystyrene. In addition to environmental considerations connected to these polymerized hydrocarbons, produced in excess of 380 million tons per year worldwide, their inherent flammability creates additional requirements associated with their manufacturing and use. Societal benefits of such polymers are extensive, and thus, there …

Tailoring Interfaces And Composition For Stable And Efficient Perovskite Solar Cells, Hamza Javaid

Doctoral Dissertations

Metal halide perovskite solar cells (PSCs) have revolutionized the field of thin film photovoltaics. Within a decade, the power conversion efficiencies (PCEs) have increased at a phenomenal rate, rising from 3.8% to more than 25% in single-junction devices, moving them ahead of the current silicon-based technology. The high efficiencies of perovskite solar cells (PSCs) and their other unique properties arise from a combination of organic and inorganic components and electronic-ionic conduction, making them excellent candidates for a plethora of applications. However, PSCs face a significant—and ironic—roadblock to commercialization: these light-harvesting materials degrade under sunlight—the very condition they would need …

Theoretical And Experimental Application Of Neural Networks In Spaceflight Control Systems, Pavel Galchenko

Doctoral Dissertations

“Spaceflight systems can enable advanced mission concepts that can help expand our understanding of the universe. To achieve the objectives of these missions, spaceflight systems typically leverage guidance and control systems to maintain some desired path and/or orientation of their scientific instrumentation. A deep understanding of the natural dynamics of the environment in which these spaceflight systems operate is required to design control systems capable of achieving the desired scientific objectives. However, mitigating strategies are critically important when these dynamics are unknown or poorly understood and/or modelled. This research introduces two neural network methodologies to control the translation and rotation …

Effects Of Vacancies And Electron Temperature On The Electron Phonon Coupling In Cubic Silicon Carbide And Their Connection To The Inelastic Thermal Spike, Salah Al-Smairat

Doctoral Dissertations

“The electron-phonon interaction is an important interaction in many solids as it influences transport phenomena and related quantities such as the electrical and thermal conductivities, especially in nuclear and space applications. The importance of the electron-phonon interaction in primary damage production in 3C-SiC is the subject of this research.

The electron-phonon coupling factor was calculated using a hybrid Density Functional Perturbation Theory - Classical Electron Gas model. The coupling factor was calculated as a function of electron temperature in pristine and defective 3C-SiC, and relaxed defective cells. The electron-phonon coupling is found to depend strongly on the electronic temperature and …

The Kanarra Fold-Thrust System -- The Leading Edge Of The Sevier Fold-Thrust Belt, Southwest Utah, William Joseph Michael Chandonia

Doctoral Dissertations

“The Jurassic to Eocene Sevier fold-thrust belt is the subject of continued scientific curiosity in tectonics, stratigraphy, and industry. Understanding its development in southwest Utah is hindered in part due to the multiple origins proposed for the Kanarra anticline, a major leading edge structure -- a drag fold along the Hurricane fault, Laramide monocline, Sevier fault propagation fold, or a combination of these -- which have confused its tectonic significance and regional context. This confusion results from the structural complexity of its exposed eastern limb, as well as displacement and burial of its crest and western limb beneath Neogene sediments …

Advances And Applications In High-Dimensional Heuristic Optimization, Samuel Alexander Vanfossan

Doctoral Dissertations

“Applicable to most real-world decision scenarios, multiobjective optimization is an area of multicriteria decision-making that seeks to simultaneously optimize two or more conflicting objectives. In contrast to single-objective scenarios, nontrivial multiobjective optimization problems are characterized by a set of Pareto optimal solutions wherein no solution unanimously optimizes all objectives. Evolutionary algorithms have emerged as a standard approach to determine a set of these Pareto optimal solutions, from which a decision-maker can select a vetted alternative. While easy to implement and having demonstrated great efficacy, these evolutionary approaches have been criticized for their runtime complexity when dealing with many alternatives or …

Deep Learning-Based Surrogate Models For Post-Earthquake Damage Assessment, Xinzhe Yuan

Doctoral Dissertations

"Seismic damage assessment is a critical step to enhance community resilience in the wake of an earthquake. This study aims to develop deep learning-based surrogate models for widely used fragility curves to achieve more accurate and rapid assessment in practice. These surrogate models are based on artificial neural networks trained from the labelled ground motions whose resulting damage classes on targeted structures are determined by nonlinear time history analyses. The development of various surrogate models is progressed in four phases. In Phase I, the multilayer perceptron (MLP) is used to develop multivariate seismic classifiers with up to 50 hand-crafted intensity …

Impurity Production And Transport In The Prototype Material Plasma Exposure Experiment, Clyde J. Beers

Doctoral Dissertations

The Prototype Material Plasma Exposure eXperiment (Proto-MPEX) is a linear pulse plasma device at Oak Ridge National Laboratory with the purpose of doing the research and development for the heating concepts on the planned full MPEX device. The goal of MPEX is to perform material studies at fusion relevant conditions. To understand the conditions at the material target for performing plasma-material interaction studies the ion temperature and density, the electron temperature and density, and the particle flux and fluence must be known. Impurities within Proto-MPEX can alter the desired conditions at the material target and need to be understood for …

A Connectivity Framework To Explore The Role Of Anthropogenic Activity And Climate On The Propagation Of Water And Sediment At The Catchment Scale, Christos Giannopoulos

Doctoral Dissertations

Anthropogenic disturbance in intensively managed landscapes (IMLs) has dramatically altered critical zone processes, resulting in fundamental changes in material fluxes. Mitigating the negative effects of anthropogenic disturbance and making informed decisions for optimal placement and assessment of best management practices (BMPs) requires fundamental understanding of how different practices affect the connectivity or lack thereof of governing transport processes and resulting material fluxes across different landscape compartments within the hillslope-channel continuum of IMLs. However, there are no models operating at the event timescale that can accurately predict material flux transport from the hillslope to the catchment scale capturing the spatial and …

Production Of Protactinium-229 Via Deuteron Irradiation Of Thorium-232, Naser Burahmah

Doctoral Dissertations

²²⁵Ac [Actinium-225] is a promising radionuclide for targeted alpha therapy of cancer. ²²⁹Pa can lead to the production of ²²⁹Th [Thorium-229] and ²²⁵Ac [Actinium-225]. Deuteron bombardment on natural thorium targets has been investigated to measure cross sections of protactinium isotopes. In this work, ²²⁹Pa [Protactinium-229] excitation function was measured via deuteron energies up to 50 MeV [Mega electron volt] of thin thorium foils. The irradiation took place at Lawrence Berkeley National Laboratory’s (LBNL) 88-Inch Cyclotron. The target processing and analysis were performed at Oak Ridge National Laboratory (ORNL). The target consisted of 4 thin foils …

Interfaces And Dynamics In Polymeric 3d Printing And Crystalline Polymer Blends, Stevenson C. Perryman

Doctoral Dissertations

This dissertation presents experimental work that provide a foundation to rationally improve fused filament fabrication (FFF) and immiscible blend compatibilization. Objects generated from additive manufacturing processes, such as FFF, have intrinsic structural weaknesses which include two project specific examples: structural anisotropy and irreversible thermal strain. Due to low adhesion between individual print layers that results in macroscopic defects, the mechanical strength of printed objects when force is applied perpendicular to the build orientation is drastically reduced. In the first dissertation chapter, we present a protocol to produce interlayer covalent bonds by depositing multi-amine additives between individual layers of a print …

Advanced Materials Design Using Application-Based Processing Techniques, Daniel S. Camarda

Doctoral Dissertations

This dissertation pertains to generating advanced materials using application-based processing techniques. First, billets consisting of PTFE sintering powders are evaluated using Thermomechancal Analysis. It was found that both shape change and volume change are associated with enthalpic and entropic recoil, respectively. These phenomena, due to melting and stored energy during the powder compaction process, were found to be molecular weight dependent. Additionally, kinetics of the recovery and sintering process were found to be slower in blended specimens than pure samples. Next, the creation of graft copolymers by selectively grafting a second polymer to the amorphous fraction of a semi-crystalline polymer …

Enabling Declarative And Scalable Prescriptive Analytics In Relational Data, Matteo Brucato

Doctoral Dissertations

Constrained optimization problems are at the heart of significant applications in a broad range of domains, including finance, transportation, manufacturing, and healthcare. They are often found at the final step of business analytics, namely prescriptive analytics, to allow businesses to transform a rich understanding of data, typically provided by advanced predictive models, into actionable decisions. Modeling and solving these problems has relied on application-specific solutions, which are often complex, error-prone, and do not generalize. Our goal is to create a domain-independent, declarative approach, supported and powered by the system where the data relevant to these problems typically resides: the database. …

Characterization Techniques And Cation Exchange Membrane For Non-Aqueous Redox Flow Battery, Kun Lou

Doctoral Dissertations

The motivation of this work comes from one of the major problems of emerging non-aqueous flow battery (NAFB) that a separator or membrane which facilitates conductivity and blocks redox species crossover does not exist. Although many aspects of principles can be mirrored from mature fuel cell and aqueous flow battery, it is found that some well-defined membrane properties in aqueous systems such as swelling, transport and interactions are different in non-aqueous solvents to some extent. However, the approach of this work does follow the way perfluorosulfonate ion exchange membrane (PFSA) facilitated development of fuel cell and aqueous flow battery in …

Fabrication Of Specialized Scintillators For Nuclear Security Applications, Cordell James Delzer

Doctoral Dissertations

Radiation detectors are important for a variety of fields including medical imaging, oil drilling, and nuclear security. Within nuclear security, they can serve a multitude of purposes whether that be imaging, localization, isotopic identification, or even just activity measurement. Even without directly seeing a nuclear material it is often able to notice their existence without a detector. Scintillators make up an important part of these detectors due to their large intrinsic efficiency, low cost, large volume, and relatively low upkeep. Due to the importance of the large number of purposes these scintillators may be used for, it can often be …

Development Of Density-Functional Tight-Binding Methods For Chemical Energy Science, Quan Vuong

Doctoral Dissertations

Density-functional tight-binding (DFTB) method is an approximation to the popular first-principles density functional theory (DFT) method. Recently, DFTB has gained considerable visibility due to its inexpensive computational requirements that confer it the capability of sustaining long-timescale reactive molecular dynamics (MD) simulations while providing an explicit description of electronic structure at all time steps. This capability allows the description of bond formation and breaking processes, as well as charge polarization and charge transfer phenomena, with accuracy and transferability beyond comparable classical reactive force fields. It has thus been employed successfully in the simulation of many complex chemical processes. However, its applications …

Collector Probe Measurements Of Sol Impurity Accumulation And The Implications Of Sol Flows On The Accumulation Amount, Shawn Zamperini

Doctoral Dissertations

A collector probe in its simplest form is a rod inserted into a plasma so that impurities are deposited onto it. These probes are then removed and analyzed to determine the deposition profile both along the length of probe and across the width of it. This dissertation covers a series of collector probes experiments and accompanying interpretive modelling all with the main goal of providing evidence for long-hypothesized near scrape-off layer (SOL) accumulation of impurities that can lead to efficient core contamination. The structure of this dissertation is as follows. A brief outline of fusion energy and why we need …

Designing Stimuli-Responsive Nanocomposites To Investigate Interface Dynamics, Huyen Vu

Doctoral Dissertations

Inspired by nature, this research focuses on designing multifunctional renewable nanocomposites with high toughness and stimuli-responsiveness. In recent years, cellulose nanocrystals (CNCs) have been explored due to their abundance, renewable resource, and unique mechanical strength and structural coloration. CNCs naturally self-assemble into the helicoidal (Bouligand) structure that effectively endure high impacts but is brittle without an attendant soft phase. A thermoresponsive polymer, poly(diethylene glycol methyl ether methacrylate) (PMEO₂MA), was incorporated into CNCs via evaporation-induced self-assembly to improve toughness of the resulting nanocomposites and to study responses in polymer dynamics under varying temperature and humidity conditions. To study microscopic …