Engineering Commons^™

Defeating Anisotropy In Material Extrusion 3d Printing Via Materials Development, Ángel Ramón Torrado Pérez

Open Access Theses & Dissertations

Additive Manufacturing technologies has been in continuous development for more than 35 years. Specifically, the later denominated Material Extrusion Additive Manufacturing (MEAM), was first developed by S. Scott Crump around 1988 and trademarked later as Fused Deposition Modeling (FDM). Although all of these technologies have been around for a while, it was not until recently that they have been more accessible to everyone. Today, the market of 3D printers covers all ranges of price, from very specialized, heavy and expensive machines, to desktop printers of only a few cubic inches in volume. Until recently, FDM technology had remained somewhat stagnant …

Integrated Sustainability And Resiliency Assessment Methodology For The Design Of Single-Family Residential Structures Subject To Wind And Flood Hazards, Elizabeth Chisolm Matthews

LSU Doctoral Dissertations

Sustainability and resiliency have become important in shaping the criteria in performance-based design objectives in the recent past and will continue to shape future design as climate change impacts and disasters become more prevalent. While much work has been carried out in developing tools to aid in sustainable and resilient performance-based design there is still much work to be done. It is evident that while sustainability and resiliency have mutual advantages there are also inherent conflicts between the two design approaches. Some of the conflict relates to the robustness required of resilient design, which may have higher environmental impacts than …

A Study To Evaluate Non-Uniform Phase Maps In Shape Memory Alloys Using Finite Element Method, Naren Motte

Theses and Dissertations

The unique thermo-mechanical behavior of Shape Memory Alloys (SMAs), such as their ability to recover the original shape upon heating or being able to tolerate large deformations without undergoing plastic transformations, makes them a good choice for actuators.

This work studies their application in the aerospace and defense industries where SMA components can serve as release mechanisms for gates of enclosures that have to be deployed remotely. This work provides a novel approach in evaluating the stress and heat induced change of phase in a SMA, in terms of the transformation strain tensor. In particular, the FEA tool

ANSYS has …

Automated Conversion Of Text Instructions To Human Motion Animation, Ravikumar Vishwanath Chimmalgi

LSU Master's Theses

Text to animation is the conversion of textual instructions to animations following and depicting those instructions. Text to animation is important to fields such as crime scene investigation, military special operations and storytelling where text is utilized. It is also useful for physical therapy where a doctor can factor in disability parameters in the 3D models and determine the safest therapy exercises for patients. It can be used in robotics, where robot assistants can be instructed to perform tasks through text instructions. In this research, a system was created to generate 3D animation of workouts from their textual instructions. An …

High Temperature Flow Solver For Aerothermodynamics Problems, Huaibao Zhang

Theses and Dissertations--Mechanical Engineering

A weakly ionized hypersonic flow solver for the simulation of reentry flow is firstly developed at the University of Kentucky. This code is the fluid dynamics module of known as Kentucky Aerothermodynamics and Thermal Response System (KATS). The solver uses a second-order finite volume approach to solve the laminar Navier– Stokes equations, species mass conservation and energy balance equations for flow in chemical and thermal non-equilibrium state, and a fully implicit first-order backward Euler method for the time integration. The hypersonic flow solver is then extended to account for very low Mach number flow using the preconditioning and switch of …

Exchange Mechanisms In Macroscopic Ordered Organic Magnetic Semiconductors, Naveen Rawat

Graduate College Dissertations and Theses

Small molecule organic semiconductors such as phthalocyanines and their derivatives represent a very interesting alternative to inorganic semiconductor materials for the development of flexible electronic devices such as organic thin field effect transistors, organic Light Emitting Diodes and photo-voltaic cells. Phthalocyanine molecules can easily accommodate a variety of metal atoms as well in the central core of the molecule, resulting in wide range of magnetic properties. Exploration of optical properties of organic crystalline semiconductors thin films is challenging due to sub-micron grain sizes and the presence of numerous structural defects, disorder and grain boundaries. However, this can be overcome by …

Developing Co-Current And Counter-Current Spray Drying Computational Fluid Dynamics (Cfd) Simulation Studies To Predict The Quality Of Microencapsulated Fish Oil With Egg White Hydrolysates Powders, Kevin Estuardo Mis Solval

LSU Doctoral Dissertations

Eggs are an excellent source of high quality protein containing all essential amino acids (EAA) including leucine. Food-grade protein hydrolysates can enhance the growth of lactic acid bacteria (LAB). Thermal degradation of bioactives normally occurs during microencapsulation by spray drying. Spray drying modeling using computational tools is essential to engineer new food powders and to minimize and thermal degradation of bioactives. The first chapter of this work discusses the optimization of an enzymatic process in terms of reaction temperature, pH, enzyme:substrate ratio, and reaction time using a response surface methodology (RSM) to produce food-grade protein hydrolysates from egg whites (EWH). …

Risk-Based Wind Loss And Mitigation For Residential Wood Framed Construction, Fatemeh Orooji

LSU Doctoral Dissertations

As a result of increasing windstorm losses in the United States over the past 50 years, a variety of residential wind hazard mitigation methods have been suggested. Mitigation undoubtedly reduces windstorm losses; however, the expected economic risk reduction of mitigation practices over the life of the building depends on the building characteristics (i.e., capacity) and the intensity and occurrence of wind speeds (i.e., demand). Effective decision making requires estimation of potential future losses based on many variables. Many models, primarily mechanics-based simulation models, have been developed to predict building damage from wind events; however; fewer models of economic loss have …

Optimal Location Of Biomethane Gas Manufacturing Plants And Allocation Of Feedstock And Liquified Carbon Product, Bingqing Wu

LSU Doctoral Dissertations

Biomethane gas (BMG), known for its sustainability, low environmental impact, and high profitability, has received wide attention in recent years. To facilitate the process of making strategic plans for building a BMG production system, this dissertation leverages the mathematical modeling and optimization techniques to minimize the supply chain cost for such a system. Typical elements in a BMG production system consist of the local farms that produce the feedstock, the hubs that collect and store the feedstock produced by farms, the reactors that generate BMG from the feedstock transported from the hubs, the condensers that liquefy the BMG from the …

Release, Stability And Functionality Of Nanodelivered Hydrophobic (Lutein And Beta-Carotene) And Hydrophilic (Folic Acid) Antioxidants Using Zein Nanoparticles, Thanida Chuacharoen

LSU Doctoral Dissertations

Nanodelivery systems enable innovations that can benefit foods and human health on a large scale in the coming years. The instabilities of antioxidants during food processing and during digestion are drawbacks that can be successfully addressed by nanoentrapment. This research provided technical strategies to synthesize zein nanoparticles loaded with hydrophobic/hydrophilic antioxidants, and to study the release profiles and physical stability of nanocarriers and chemical stability of entrapped bioactives under on-shelf and GI conditions. The results supported the potential of zein nanoparticles stabilized by surfactants to improve chemical stability of entrapped lutein, and to slowly release lutein under PBS conditions. Same …

Image-Based Modeling Of Porous Media Using Fem And Lagrangian Particle Tracking, Paula Cysneiros Sanematsu

LSU Doctoral Dissertations

The study of fundamental flow and transport processes at the pore scale is essential to understanding how the mechanisms affect larger, field-scale, processes that occur in oil and gas recovery, groundwater flow, contaminant transport, and CO2 sequestration. Pore-scale imaging and modeling is one of the techniques used to investigate these fundamental mechanisms. Although extensive development of pore-scale imaging and modeling has occurred recently, some areas still need further advances. In this work, we address two areas: (1) imaging of bulk proppants and proppant-filled fractures under varying loading stress and flow simulation in these systems and (2) nanoparticle (NP) transport modeling …

Interorganizational Collaboration And Systemic Change Framework For Building Information Modeling (Bim) Adoption, Rehema Joseph Monko

LSU Doctoral Dissertations

It was found that an integrated framework needs to be developed for the construction industry that allows optimized interorganizational collaboration and systemic change while using Building Information Modeling (BIM) technologies. The framework needs to be effective so the industry can adopt BIM through a set of interdependent activities beyond their organizational boundaries. The adoption has been proven difficult because of industry competitiveness and a fragmented work environment. Meanwhile, existing frameworks vary between studies. This research developed an integrated framework, identified critical factors, and provided an evaluation guide for interorganizational collaboration and set of coordinated changes necessary to adopt BIM. This …

Product Parameters Optimization For Double Purge Of C-Magma Integrated With Conventional Three-Boiling Crystallization Scheme To Improve Raw Sugar Whole Color, Luz Stella Polanco

LSU Doctoral Dissertations

Efficient crystallization in raw sugar production is the result of a combination of factors and responses that meet specific criteria. Matching a sugar quality standard, maximizing sugar yield, maximizing crystallization equipment capacity and minimizing heat requirement are all necessary optimization criteria. A double centrifugation or purge of C-magma is intended to improve raw sugar whole color by the reduction of color recirculation with the sugar crystal. Combining a three boiling crystallization scheme with a second centrifugation after the last crystallization stage required optimizing the input/output product parameters (purities) and the location of the liquid recycle component (double purge molasses) for …

Time-Resolved Investigations Of Continuous Flow Synthesis Of Nanomaterials And Catalysis Using Millifluidic Reactors For Biomass Conversion Reactors, Chelliah V Navin

LSU Doctoral Dissertations

Millifluidics can be used as a simple tool and convenient platform to perform in-situ investigations on nanoparticles synthesis to generate real-time information in a continuous flow fashion. These investigations can be used to observe the relationship between the structure and performance of nanoparticles for catalytic applications as a function of space and time. These improvements in nanoparticles research offer unique advantages to develop catalysts with molecular strategies. In order to showcase these advantages of the millifluidic reactors, here we: A. Extensively covered a complete literature review on Lab-on-a-chip devices for gold nanoparticle synthesis and as a catalyst support for continuous …

Derivation And Validation Of The Friction, Gravitational, And Air Forces Encountered During Installation Of Fiber Optic Cable, Faheed Olayemi Owokoniran

All Graduate Theses, Dissertations, and Other Capstone Projects

This paper presents an introduction to fiber optic cable and the fiber optic communication system. An important phase in the supply of this new technology is to transport the fiber optic cable to the vicinity of service. Cable pulling and cable blowing - laminar flow; piston type - are the two main methods of installing fiber optic cable. Both methods of installation have limiting factors that need to be evaluated in order to perform a successful installation. The limiting factors for laminar type cable blowing are further discussed in this paper. A method was proposed to determine the forces - …

Constitutive Modeling And Experiments For The Micro And Nano Behaviors In Metals, Cheng Zhang

LSU Doctoral Dissertations

This work addresses the micro- and nano-behaviors in metals through constitutive modeling and experiments. The size effect encountered during nanoindentation experiments, which is known as indentation size effect (ISE), is investigated for metal materials. The ISE is believed to be related with the strain gradient at small indentation depths. Geometrically necessary dislocations (GNDs) are formed in order to accommodate the strain gradient, which results in the increase in the material hardness. The grain boundaries in polycrystalline materials play an important role on the material hardness during nanoindentation experiments as there is a soften-hardening segment in the curve of hardness as …

Aero-Thermal Characterization Of Silicon Carbide Flexible Tps Using A 30kw Icp Torch, Walten Owens

Graduate College Dissertations and Theses

Flexible thermal protection systems are of interest due to their necessity for the success of future atmospheric entry vehicles. Current non-ablative flexible designs incorporate a two-dimensional woven fabric on the leading surface of the vehicle. The focus of this research investigation was to characterize the aerothermal performance of silicon carbide fabric using the 30 kW Inductively Coupled Plasma Torch located at the University of Vermont. Experimental results have shown that SiC fabric test coupons achieving surface temperatures between 1000°C and 1500°C formed an amorphous silicon dioxide layer within seconds after insertion into air plasmas. The transient morphological changes that occurred …

The Interaction Mechanisms Of A Screw Dislocation With A Defective Coherent Twin Boundary In Copper, Qiongjiali Fang

Graduate College Dissertations and Theses

Σ3{111} coherent twin boundary (CTB) in face-centered-cubic (FCC) metals and alloys have been regarded as an efficient way to simultaneously increase strength and ductility at the nanoscale. Extensive study of dislocation-CTB interaction has been carried out by a combination of computer simulations, experiments and continuum theory. Most of them, however, are based on the perfect CTB assumption. A recent study [Wang YM, Sansoz F, LaGrange T, et al. Defective twin boundaries in nanotwinned metals. Nat Mater. 2013;12(8):697-702.] has revealed the existence of intrinsic kink-like defects in CTBs of nanotwinned copper through nanodiffraction mapping technique, and has confirmed the effect of …

Ruo2 Nanorods As An Electrocatalyst For Proton Exchange Membrane Water Electrolysis, Richard Smith

Graduate College Dissertations and Theses

The desire for pure diatomic hydrogen gas, H2(g), has been on the rise since the concept of the hydrogen economy system was proposed back in 1970. The production of hydrogen has been extensively examined over 40 + years as the need to replace current fuel sources, hydrocarbons, has become more prevalent. Currently there are only two practical and renewable production methods of hydrogen; landfill gas and power to gas. This study focuses on the later method; using various renewable energy sources, such as photovoltaics, to provide off-peak energy to perform water electrolysis. Efficient electrolysis takes place in electrochemical cells which …

Binder Jet Additive Manufacturing Of Stainless Steel-Hydroxyapatite Bio-Composite, Don Suranga Dhanushka Uduwage

All Graduate Theses, Dissertations, and Other Capstone Projects

This study was conducted to create a bio-composite with a porous structure using the binder-jet printing additive manufacturing process. The samples were printed by changing the parameters such as layer thickness, roller speed, sintering time and sintering temperature of the X1-Lab binder jet additive manufacturing printer. The samples were printed 80% stainless steel 316 mixed with 20% Calcium Phosphate Tribasic by volume. Eight experiments were attempted to print according to the fractional factorial design of experiment. The effects of changing parameters on the mechanical properties of the new bio-composite was tested using ASTM E-09 compressive strength standards. The compression testing …