Science and Mathematics Education Commons^™

Reducing Food Scarcity: The Benefits Of Urban Farming, S.A. Claudell, Emilio Mejia

Journal of Nonprofit Innovation

Urban farming can enhance the lives of communities and help reduce food scarcity. This paper presents a conceptual prototype of an efficient urban farming community that can be scaled for a single apartment building or an entire community across all global geoeconomics regions, including densely populated cities and rural, developing towns and communities. When deployed in coordination with smart crop choices, local farm support, and efficient transportation then the result isn’t just sustainability, but also increasing fresh produce accessibility, optimizing nutritional value, eliminating the use of ‘forever chemicals’, reducing transportation costs, and fostering global environmental benefits.

Imagine Doris, who is …

Bbt Acoustic Alternative Top Bracing Cadd Data Set-Norev-2022jun28, Bill Hemphill

STEM Guitar Project’s BBT Acoustic Kit

This electronic document file set consists of an overview presentation (PDF-formatted) file and companion video (MP4) and CADD files (DWG & DXF) for laser cutting the ETSU-developed alternate top bracing designs and marking templates for the STEM Guitar Project’s BBT (OM-sized) standard acoustic guitar kit. The three (3) alternative BBT top bracing designs in this release are
(a) a one-piece base for the standard kit's (Martin-style) bracing,
(b) 277 Ladder-style bracing, and
(c) an X-braced fan-style bracing similar to traditional European or so-called 'classical' acoustic guitars.

The CADD data set for each of the three (3) top bracing designs includes …

Bbt Side Mold Assy, Bill Hemphill

STEM Guitar Project’s BBT Acoustic Kit

This electronic document file set covers the design and fabrication information of the ETSU Guitar Building Project’s BBT (OM-sized) Side Mold Assy for use with the STEM Guitar Project’s standard acoustic guitar kit. The extended 'as built' data set contains an overview file and companion video, the 'parent' CADD drawing, CADD data for laser etching and cutting a drill &/or layout template, CADD drawings in AutoCAD .DWG and .DXF R12 formats of the centerline tool paths for creating the mold assembly pieces on an AXYZ CNC router, and support documentation for CAM applications including router bit specifications, feeds, speed, multi-pass …

Demonstration Of A Distributed Bragg Reflector For Polyvinylcarbazole And Cadmium Sulfide Layers: Modeling And Comparison To Experimental Results, Javier E. Hasbun, L. Ajith Desilva

Georgia Journal of Science

Light wave propagation in a periodically stratified medium has many applications in physics, mathematics, and engineering. The subject is of interest to students, teachers, and researchers, as it presents a great opportunity to focus on principles of optics and to understand the basics of mathematical modeling. A complete theory of wave propagation can be derived using Born’s optics theory. We employed that theory to determine the reflectivity of a one-dimensional distributed Bragg reflector (DBR) and do simulations using MATLAB. A DBR is a photonic crystal consisting of alternating layers of materials with different refractive indices. In this study, we modeled …

Concrete Beam Design: Pouring The Foundation To Engineering In T&E Classrooms, Andrew J. Hughes, Chris Merrill

Educational Leadership & Technology Faculty Publications

Ask a middle or high school student if they could design a concrete beam that weighs only 20 pounds and is 36” long but must hold 600 pounds without failing. What is the student likely to say? What if the student was told that, with some optimized decision making based on relatively straightforward mathematics, their beam could hold 2400 pounds or more? The focus of this article is not on concrete beam design, it is rather an introduction to engineering principles in beam design using a lab activity. The concepts and skills learned in this article will lead students into …

Tabletop Mechanical Tester, Jamie Dombroski, Brian English, Richard Leffler, Andrew Shirk

Williams Honors College, Honors Research Projects

The need for hands-on and face-to-face experiences in the engineering classroom is very great. The equations, principles, and concepts can all be learned, but without the visual and tactile application, these don’t always sink in or become concrete. A small-scale tensile test machine was designed, sourced, manufactured, and tested for the purpose of being applied in classroom settings to provide this experience to engineering students. Extensive research was performed concerning tensile machines on the market, the essential elements of which are the load cell, grips, crosshead, extensometer, motor, and frame. The raw materials for the frame were purchased and drawings …

Voices Of Our Students: Using Evidence-Based Methods To Inform A Multidisciplinary Engineering Program Design, Vicki Stieha, Noah Salzman, Amy J. Moll

Materials Science and Engineering Faculty Publications and Presentations

Listening carefully to our students and integrating the variables that matter to them is a step that we can take to increase the number of women and underrepresented minority graduates in engineering. This paper shares an evaluative case study as we report findings from data gathering tools guiding our continuous improvement process. The findings illuminate students’ perceptions of their engineering design course and curriculum. We conclude by discussing the pedagogical decisions the teaching team is making as a result of listening to our students’ voices.

Project Excel: Web-Based Scanning Electron Microscopy For K-12 Education, L. Scott Chumbley, Connie P. Hargrave, Kristen P. Constant, Brian Hand, Thomas Andre, E. Ann Thompson

Constance P. Hargrave

Project ExCEL (Extended Classroom for Enhanced Learning) brings the capabilities of scanning electron microscopy (SEM) into classrooms. University and industry personnel, working together, have developed a web-based interface to allow schools to control a modern SEM. The interface allows a user control of the operating parameters of the microscope, stage movement, and chemical analysis. Such total control is not available on any other system. Since Iowa State University (ISU) pioneered the idea of remote SEM for education, researchers have learned that providing teachers access to sophisticated equipment does not ensure that it will be used. Teachers are busy, and structured …

Project Excel—Web-Based Sem For K–12 Education, L. Scott Chumbley, Kristen P. Constant, Connie P. Hargrave, Tom Andre

Constance P. Hargrave

The goal of Project ExCEL, the Extended Classroom for Enhanced Learning, is to bring the capabilities of Scanning Electron Microscopy (SEM) into elementary and secondary classrooms. We have developed an entirely web-based interface to allow schools to control a modern SEM. The web interface allows a remote user complete control of all the operating parameters of the microscope, including stage movement and x-ray chemical analysis. Such total control currently is not available on any other system. Since pioneering the idea of remote SEM use for K-12 education in the early 1990s, we have learned that merely providing schools and teachers …

Magneto-Active Slosh Control System Using Free Floating Membrane For Cylinderical Propellant Tanks Read More: Https://Arc.Aiaa.Org/Doi/Abs/10.2514/6.2019-2177, Pedro Llanos

Pedro J. Llanos (www.AstronauticsLlanos.com)

Work In Progress: Institutional Context And The Implementation Of The Redshirt In Engineering Model At Six Universities, Ann Delaney, Donna C. Llewellyn, Janet Callahan

Materials Science and Engineering Faculty Publications and Presentations

Low-income students are underrepresented in engineering and are more likely to struggle in engineering programs. Such students may be academically talented and perform well in high school, but may have relatively weak academic preparation for college compared to students who attended better-resourced schools. Four-year engineering and computer science curricula are designed for students who are calculus-ready, but many students who are eager to become engineers or computer scientists need additional time and support to succeed. The NSF-funded Redshirt in Engineering Consortium was formed in 2016 as a collaborative effort to build on the success of three existing “academic Redshirt” programs …

The Redshirt In Engineering Consortium: Progress And Early Insights, Janet Callahan, Donna C. Llewellyn, Ann E. Delaney

Materials Science and Engineering Faculty Publications and Presentations

The NSF-funded Redshirt in Engineering Consortium was formed in 2016 with the goal of enhancing the ability of academically talented but underprepared students coming from lowincome backgrounds to successfully graduate with engineering degrees. The Consortium takes its name from the practice of redshirting in college athletics, with the idea of providing an extra year and support to help promising engineering students complete a bachelor’s degree. The Consortium builds on the success of three existing “academic redshirt” programs and expands the model to three new schools. The Existing Redshirt Institutions (ERIs) help mentor and train the new Student Success Partners (SSPs), …

Redshirt In Engineering: A Model For Improving Equity And Inclusion, Donna C. Llewellyn, Ann Delaney, Janet Callahan

Materials Science and Engineering Faculty Publications and Presentations

The NSF-funded Redshirt in Engineering Consortium was formed in 2016 with the goal of enhancing the ability of academically talented but underprepared students coming from low-income backgrounds to successfully graduate with engineering degrees. The Consortium takes its name from the practice of redshirting in college athletics, with the idea of providing an extra year and support to help promising engineering students complete a bachelor’s degree. The Consortium builds on the success of three existing “academic redshirt” programs and expands the model to three new schools. The Existing Redshirt Institutions (ERIs) help mentor and train the new Student Success Partners (SSP), …

Creating A Stem Identity: Investment With Return, Janet Callahan, Patricia Pyke, Susan Shadle, R. Eric Landrum

R. Eric Landrum

Establishing a strong STEM (science, technology, engineering and mathematics) identity at Boise State University, a metropolitan campus with approximately 3,655 undergraduate STEM students and a total undergraduate enrollment of approximately 19,042 (16,136 FTE) has been an important step toward creating a climate conducive to facilitating fundamental change. Examples of such change include building collaborations among faculty within and across departments, establishing the identity of students as part of a community beyond their chosen major, improving the efficiency and effectiveness of university systems, and perhaps most importantly, developing a framework to think deliberately about ways to effect change. This paper is …

Ten Years Later: Where Are They Now?, Janet Callahan, Donna C. Llewellyn, Vicki Stieha, Ann E. Delaney

Materials Science and Engineering Faculty Publications and Presentations

This paper explores the educational and career trajectories of the alumnae of an outreach activity for girls. The outreach activity was originally developed using an integrated marketing approach to attract girls into engineering programs.¹ The program, a two day, overnight experience for rising 9^th, 10^th and 11^th grade girls, focuses on showcasing engineering as an exciting, creative activity, including activities developed from that perspective. Started in 2005 and held annually since then, a total of over 500 girls have participated, with approximately 85% of them coming from Boise State University’s immediate metropolitan area. Facilitated by …

The Impact Of Volunteering At A Girls Outreach Activity On Community Formation, Donna C. Llewellyn, Janet Callahan, Amy J. Moll, Catherine Rose Bates

Materials Science and Engineering Faculty Publications and Presentations

This paper is focused on exploring the motivation for volunteering at an engineering outreach activity. The outreach activity itself involved a two day, overnight experience for 9th and 10th grade girls that started in 2005, and which has been held annually since that time. The outreach event takes place in Boise, Idaho, and at the time of its onset was the only outreach or camp activity in the state focused on girls or young women. Across ten years, 510 total girls have participated, with approximately 85% of them coming from the immediate metropolitan area. The program was developed with a …

Support Model For Transfer Students Utilizing The Stem Scholarship Program, Lynn Olson, Amy J. Moll, Doug Bullock, Amit Jain, Janet Callahan

Materials Science and Engineering Faculty Publications and Presentations

This paper describes how the College of Engineering at Boise State University utilized a National Science Foundation S-STEM award from 2011 to 2016 to support transfer students in their path toward graduation. The need for this support was a result of both Boise State University College of Engineering’s transition from a 2-year pre-engineering program to the establishment of Bachelors of Science in Engineering Degree programs in 1997 as well as the establishment of the College of Western Idaho as a regional community college in 2007. Both of these factors led to an increase in the numbers of incoming engineering students …

3d Printing, Open-Source Technology And Their Applications In Research, Chenlong Zhang

Dissertations, Master's Theses and Master's Reports

Open-source software received tremendous success as it drives down the cost of software and expand the distribution. Open-source hardware, as part of the open-source movement, has just risen into public attention for its potential to further drive down the cost of all kinds of manufacturing goods and reshape the manufacture chain. In this report we explores the history, development and the future of open-source hardware project, summarizing the opportunities, challenges and possible solutions. 3D printing is demonstrated as a booster to assist open-source hardware’s development. Low-cost 3D printer enables at-home and in-time fabrication, the download-print-use-improve-distribute cycle is established to encourage …

Creating A Stem Identity: Investment With Return, Janet Callahan, Patricia Pyke, Susan Shadle, R. Eric Landrum

Materials Science and Engineering Faculty Publications and Presentations

Establishing a strong STEM (science, technology, engineering and mathematics) identity at Boise State University, a metropolitan campus with approximately 3,655 undergraduate STEM students and a total undergraduate enrollment of approximately 19,042 (16,136 FTE) has been an important step toward creating a climate conducive to facilitating fundamental change. Examples of such change include building collaborations among faculty within and across departments, establishing the identity of students as part of a community beyond their chosen major, improving the efficiency and effectiveness of university systems, and perhaps most importantly, developing a framework to think deliberately about ways to effect change. This paper is …

Materials Education And Research In Art And Design: A New Role For Libraries (Website), Mark Pompelia

Materials Education and Research in Art and Design: A New Role for Libraries

No abstract provided.

Materials Education And Research In Art And Design: A New Role For Libraries (Program Sheet), Mark Pompelia

Materials Education and Research in Art and Design: A New Role for Libraries

No abstract provided.

Materials Education And Research In Art And Design: A New Role For Libraries (Program Booklet), Mark Pompelia

Materials Education and Research in Art and Design: A New Role for Libraries

No abstract provided.

Materials Education And Research In Art And Design: A New Role For Libraries (Survey Stats), Mark Pompelia

Materials Education and Research in Art and Design: A New Role for Libraries

No abstract provided.

Materials Collection Creation And Administration: A New Role For Libraries (White Paper), Mark Pompelia

Materials Education and Research in Art and Design: A New Role for Libraries

The Problem/Opportunity: To define, identify, and guide design-based materials collections in academic settings and foster community among those with existing collections and/or those considering creating and supporting one.

Contents and topics:

1. What is a materials collection?
2. Why have a materials collection?
3. Acquisition strategies
4. Organizational approaches
5. Programming possibilities
6. Symposium summary
7. Resources

Examining The Effects Of Computational Tools On Students' Conceptual Understanding Of Thermodynamics Of Material Concepts And Representations, Oyindamola Oluwatimi

Open Access Theses

Technology is becoming a more critical agent for supporting learning as well as research in science and engineering. In particular, technology-based tools in the form of simulations and virtual environments support learning using mathematical models and computational methods. The purpose of this research is to: (a) measure the value added in conveying Thermodynamics of materials concepts with a blended learning environment using computational simulation tools with lectures; and (b) characterize students' use of representational forms to convey their conceptual understanding of core concepts within a learning environment that blended Gibbs computational resource and traditional lectures.

A mix-method approach was implemented …

Enhancing Precalculus Curricula With E-Learning: Implementation And Assessment, Janet Callahan, Seung Youn Chyung, Joanna Guild, William Clement, Joe Guarino, Doug Bullock, Cheryl Schrader

Janet M. Callahan

During Fall semester of 2007, a semester-long, quasi-experimental study was conducted at Boise State University to investigate the effectiveness of a systematically sequenced and managed, self-paced e-learning activity on improving students’ academic performance and motivation. A total of 125 students enrolled in 3 different sections of a Precalculus class participated in the study. The e-learning activity was implemented in 2 of the 3 sections as a required homework assignment. Students enrolled in one of the 2 selected sections were all engineering majors. The 3^rd section was a control group that did not use the e-learning activity. A pre-test, measuring …

Transferts De Chaleur Dans Un Réacteur Thermochimique Solaire Muni D’Un Récepteur Volumique Poreux, Hernando Romero Paredes Rubio

Hernando Romero Paredes Rubio

Un réacteur thermochimique solaire de 1 kW muni d’une structure céramique poreuse en céramique est modélisé pour simuler les transferts thermiques a l’intérieur du récepteur volumétrique. Le modèle développé a été utilisé pour prévoir le comportement thermique du réacteur en fonction des différentes conditions opératoires qui concernent le débit de gaz inerte, le flux solaire incident, la porosité, la longueur du récepteur, et la prise en compte de réactions chimiques. Les résultats montrent que la température maximale est de 1850K pour une concentration solaire de 1000 soleils. La température diminue de manière significative lorsque le débit de gaz augmente. Un …

A Comparison Of Two Engineering Outreach Programs For Adolescents, Louis S. Nadelson, Janet M. Callahan

Materials Science and Engineering Faculty Publications and Presentations

There is continued growth and development of outreach programs designed to increase pre-college students’ awareness and understanding of engineering as a profession and as a career. These outreach programs vary in format and in the groups targeted for participation but maintain the same fundamental goal of increasing participant knowledge of engineering. Many of these outreach programs also maintain the implicit goal of increasing the participants' knowledge and attitudes toward college. The additional resources and funding that are commonly allocated to support outreach programs frequently involve documenting accountability which motivates evaluation of program impact. Therefore, many outreach events include program evaluation …

College Of Engineering Senior Design Competition Fall 2010, University Of Nevada, Las Vegas

Fred and Harriet Cox Senior Design Competition Projects

Part of every UNLV engineering student’s academic experience, the senior design project stimulates engineering innovation and entrepreneurship. Each student in their senior year chooses, plans, designs, and prototypes a product in this required element of the curriculum. A capstone to the student’s educational career, the senior design project encourages the student to use everything learned in the engineering program to create a practical, real world solution to an engineering challenge.

The senior design competition helps to focus the senior students in increasing the quality and potential for commercial application for their design projects. Judges from local industry evaluate the projects …

Understanding Materials, Petros J. Katsioloudis

STEMPS Faculty Publications

The article discusses the importance of understanding the characteristics of materials that will be used for different applications. Through the years, the inventions and innovations in the technology of materials are becoming more technologically complex. Innovations in the materials are divided in different categories, including metals, ceramics, polymers and composites. Example of such innovations in the technology of materials include the ceramic composite applied to the surface of the space shuttle panels to absorb and release high amounts of heat.