Navigation, Guidance, Control, and Dynamics Commons^™

Hybrid Electric Vehicle Energy Management Strategy With Consideration Of Battery Aging, Bin Zhou

Dissertations, Master's Theses and Master's Reports

The equivalent consumption minimization strategy (ECMS) is a well-known energy management strategy for Hybrid Electric Vehicles (HEV). ECMS is very computationally efficient since it yields an instantaneous optimal control. ECMS has been shown to minimize fuel consumption under certain conditions. But, minimizing the fuel consumption often leads to excessive battery damage. The objective of this dissertation is to develop a real-time implementable optimal energy management strategy which improves both the fuel economy and battery aging for Hybrid Electric Vehicles by using ECMS. This work introduces a new optimal control problem where the cost function includes terms for both fuel consumption …

Vehicle Dynamics Modeling For Autonomous Drifting And Clothoid Based Waypoint Interpolation, Shubham Vatsa

Dissertations, Master's Theses and Master's Reports

The advent of autonomous vehicles necessitates a redefinition of road safety regulations, considering a controller can possess better driving skills than an average person. The work presented here partly focuses on a vehicle dynamics model development to help imitate and control vehicle drifting maneuvers. As we see, a professional driver drifting through the traffic while keeping the car safe, it can be utilized to avoid accidents at high speeds, if required. Although drifting can produce higher yaw rates than the regular driving regime, these control capabilities have not yet been exploited in the current automotive control systems. Therefore, this report …

Quantitative Performance Assessment Of Lidar-Based Vehicle Contour Estimation Algorithms For Integrated Vehicle Safety Applications, David M. Mothershed

Electronic Theses and Dissertations

Many nations and organizations are committing to achieving the goal of `Vision Zero' and eliminate road traffic related deaths around the world. Industry continues to develop integrated safety systems to make vehicles safer, smarter and more capable in safety critical scenarios. Passive safety systems are now focusing on pre-crash deployment of restraint systems to better protect vehicle passengers. Current commonly used bounding box methods for shape estimation of crash partners lack the fidelity required for edge case collision detection and advanced crash modeling. This research presents a novel algorithm for robust and accurate contour estimation of opposing vehicles. The presented …

Atv Dynamics And Pediatric Rider Safety, James T. Auxier Ii

Theses and Dissertations--Biomedical Engineering

It has been observed through numerous academic and governmental agency studies that pediatric all-terrain vehicle ridership carries significant risk of injury and death. While no doubt valuable to safety, the post-hoc approach employed in these studies does little to explain the why and how behind the risk factors. Furthermore, there has been no prolonged, widespread, organized, and concerted effort to reconstruct and catalog the details and causes of the large (20,000+) number of ATV-related injuries that occur each year as has been done for road-based motor vehicle accidents. This dissertation takes the opposite approach from a meta-analysis and instead examines …

Ethical Decision Making Behind The Wheel – A Driving Simulator Study, Siby Samuel, Sarah Yahoodik, Yusuke Yamani, Krishna Valluru, Donald L. Fisher

Psychology Faculty Publications

Over the past several years, there has been considerable debate surrounding ethical decision making in situations resulting in inevitable casualties. Given enough time and all other things being equal, studies show that drivers will typically decide to strike the fewest number of pedestrians in scenarios where there is a choice between striking several versus one or no pedestrians. However, it is unclear whether drivers behave similarly under situations of time pressure. In our experiment in a driving simulator, 32 drivers were given up to 2 s to decide which group of pedestrians to avoid among groups of larger (5) or …

Energy Consumption And Savings Analysis Of A Phev In Real World Driving Through Vehicle Connectivity Using Vehicle Platooning, Blended Mode Operation And Engine Start-Stop Optimizers, Pruthwiraj Santhosh

Dissertations, Master's Theses and Master's Reports

This report presents an analysis on energy consumption of a Gen II Chevrolet Volt PHEV and its energy savings potential in Real World Driving scenarios with the help of vehicle connectivity. The research on the energy consumption analysis and optimization using connectivity will focus on four main areas of contribution which includes 1.) vehicle testing on a pre-defined drive cycle and alternative routing near the Michigan Tech campus and APS research center that is a continuation of previous students' works, 2) the energy savings potential of vehicle platooning and various vehicle platoon configurations, 3) the updating of a PHEV implementation …

Filtered-Dynamic-Inversion Control For Unknown Minimum-Phase Systems With Unknown Relative Degree, Sumit Suryakant Kamat

Theses and Dissertations--Mechanical Engineering

We present filtered-dynamic-inversion (FDI) control for unknown linear time-invariant systems that are multi-input multi-output and minimum phase with unknown-but-bounded relative degree. This FDI controller requires limited model information, specifically, knowledge of an upper bound on the relative degree and knowledge of the first nonzero Markov parameter. The FDI controller is a single-parameter high-parameter-stabilizing controller that is robust to uncertainty in the relative degree. We characterize the stability of the closed-loop system. We present numerical examples, where the FDI controller is implemented in feedback with mathematical and physical systems. The numerical examples demonstrate that the FDI controller for unknown relative degree …

Implementation Of Radial Basis Function Artificial Neural Network Into An Adaptive Equivalent Consumption Minimization Strategy For Optimized Control Of A Hybrid Electric Vehicle, Thomas P. Harris

Graduate Theses, Dissertations, and Problem Reports

Continued increases in the emission of greenhouse gases by passenger vehicles has accelerated the production of hybrid electric vehicles. With this increase in production, there has been a parallel demand for continuously improving strategies of hybrid electric vehicle control. The goal of an ideal control strategy is to maximize fuel economy while minimizing emissions. The design and implementation of an optimized control strategy is a complex challenge. Methods exist by which the globally optimal control strategy may be found. However, these methods are not applicable in real-world driving applications since these methods require a priori knowledge of the upcoming drive …

Route Planning For Long-Term Robotics Missions, Christopher Alexander Arend Tatsch

Graduate Theses, Dissertations, and Problem Reports

Many future robotic applications such as the operation in large uncertain environment depend on a more autonomous robot. The robotics long term autonomy presents challenges on how to plan and schedule goal locations across multiple days of mission duration. This is an NP-hard problem that is infeasible to solve for an optimal solution due to the large number of vertices to visit. In some cases the robot hardware constraints also adds the requirement to return to a charging station multiple times in a long term mission. The uncertainties in the robot model and environment require the robot planner to account …

Zips Racing Electric Can Communications, Andrew Jordan, Adam Long, Susanah Kowalewski, Rami Nehme

Williams Honors College, Honors Research Projects

The CAN protocol has been a standard of electronic communication networks of automotive vehicles since the early 2000s due to its robust reliability in harsh environments. For the 2020 competition year, the Zips Racing Electric design team will be building an entirely new, fully-electric vehicle with CAN communication implemented rather than communicating via pure analog signals. Hardware and software can be utilized to read analog electrical signals from a source, such as accelerator and brake sensors, and encode them into a digital message that meets the CAN 2.0B communication protocol standard. Likewise, software can be used to extract data from …

Sensor Emulation With Physiolocal Data In Immersive Virtual Reality Driving Simulator, Jungsu Pak, Oliver Mathias, Ariane Guirguis, Uri Maoz

Student Scholar Symposium Abstracts and Posters

Can we enhance the safety and comfort of AVs by training AVs with physiological data of human drivers? We will train and compare AV algorithm with/without physiological data.

Self-Driving Toy Car Using Deep Learning, Fahim Ahmed, Suleyman Turac, Mubtasem Ali

Publications and Research

Our research focuses on building a student affordable platform for scale model self-driving cars. The goal of this project is to explore current developments of Open Source hardware and software to build a low-cost platform consisting of the car chassis/framework, sensors, and software for the autopilot. Our research will allow other students with low budget to enter into the world of Deep Learning, self-driving cars, and autonomous cars racing competitions.

The Challenges Facing Autonomous Vehicles And The Progress In Addressing Them, Garrett Johnson

Senior Honors Theses

Autonomous vehicles are an emerging technology that faces challenges, both technical and socioeconomic. This paper first addresses specific technical challenges, such as parsing visual data, communicating with other entities, and making decisions based on environmental knowledge. The technical challenges are to be addressed by the fields of image processing, Vehicle to Everything Communication (V2X), and decision-making systems. Non-technical challenges such as ethical decision making, social acceptance, and economic pushback are also discussed. Ethical decision making is discussed in the framework of deontology vs utilitarianism, while social acceptance of utilitarian autonomous vehicles is also investigated. Last, the likely economic impact is …

Radio Direction Finding Using Pseudo-Doppler For Uav-Based Animal Tracking, Anup Karki

Masters Theses

Radio Direction Finding (RDF) is commonly used for low cost tracking and navigation systems. However, for a low cost application and mobility, the design constraints are highly limited. Pseudo Doppler (PD) can improve RDF capabilities without being cost prohibitive. This work entails the analysis of PD RDF and its potential use for Unmanned Aerial Vehicles (UAV) that are currently employed in wildlife research animal tracking. PD is based on the doppler effect or doppler shift. The doppler effect works like a frequency modulator that increases or decreases the observed frequency depending on whether a signal source is approaching or receding …

Comparison Of Modern Controls And Reinforcement Learning For Robust Control Of Autonomously Backing Up Tractor-Trailers To Loading Docks, Journey Mcdowell

Master's Theses

Two controller performances are assessed for generalization in the path following task of autonomously backing up a tractor-trailer. Starting from random locations and orientations, paths are generated to loading docks with arbitrary pose using Dubins Curves. The combination vehicles can be varied in wheelbase, hitch length, weight distributions, and tire cornering stiffness. The closed form calculation of the gains for the Linear Quadratic Regulator (LQR) rely heavily on having an accurate model of the plant. However, real-world applications cannot expect to have an updated model for each new trailer. Finding alternative robust controllers when the trailer model is changed was …

Gesture Based Control Of Semi-Autonomous Vehicles, Brian Sanders

Computational Modeling & Simulation Engineering Theses & Dissertations

The objective of this investigation is to explore the use of hand gestures to control semi-autonomous vehicles, such as quadcopters, using realistic, physics based simulations. This involves identifying natural gestures to control basic functions of a vehicle, such as maneuvering and onboard equipment operation, and building simulations using the Unity game engine to investigate preferred use of those gestures. In addition to creating a realistic operating experience, human factors associated with limitations on physical hand motion and information management are also considered in the simulation development process. Testing with external participants using a recreational quadcopter simulation built in Unity was …

Optimal Direct Yaw Moment Control Of A 4wd Electric Vehicle, Winston James Wight

Master's Theses

This thesis is concerned with electronic stability of an all-wheel drive electric vehicle with independent motors mounted in each wheel. The additional controllability and speed permitted using independent motors can be exploited to improve the handling and stability of electric vehicles. In this thesis, these improvements arise from employing a direct yaw moment control (DYC) system that seeks to adapt the understeer gradient of the vehicle and achieve neutral steer by employing a supervisory controller and simultaneously tracking an ideal yaw rate and ideal sideslip angle. DYC enhances vehicle stability by generating a corrective yaw moment realized by a torque …

A Legal Study On Challenges Confronted By Unmanned Ships, Minhe Li

Maritime Safety & Environment Management Dissertations (Dalian)

No abstract provided.

Electronic Cvt - Controls, Alec William Hardy, Jessalyn Leora Ann Bernick, Nicholas Esteban Capdevila, Tristan Charles Perry

Mechanical Engineering

The following document outlines the design process, manufacturing, and testing of the control system for an electronically controlled continuously variable transmission (ECVT). This control system was integrated into the custom designed and manufactured mechanical transmission system created in parallel by another senior project group. The transmission was designed for use in the Cal Poly Baja SAE vehicle. Through researching customer needs, competition requirements, previous and alternate CVT designs, and vehicle characteristics, we were able to determine the requirements and specifications for our unique system. Input, output, speed, and durability requirements guided our hardware selection. The primary components which comprised our …

Implementation Of A Scale Semi-Autonomous Platoon To Test Control Theory Attacks, Erik Miller

Master's Theses

With all the advancements in autonomous and connected cars, there is a developing body of research around the security and robustness of driving automation systems. Attacks and mitigations for said attacks have been explored, but almost always solely in software simulations.

For this thesis, I led a team to build the foundation for an open source platoon of scale semi-autonomous vehicles. This work will enable future research into implementing theoretical attacks and mitigations. Our 1/10 scale car leverages an Nvidia Jetson, embedded microcontroller, and sensors. The Jetson manages the computer vision, networking, control logic, and overall system control; the embedded …