Open Access. Powered by Scholars. Published by Universities.®
Public Affairs, Public Policy and Public Administration Commons™
Open Access. Powered by Scholars. Published by Universities.®
- Publication Year
- File Type
Articles 721 - 750 of 849
Full-Text Articles in Public Affairs, Public Policy and Public Administration
Ddasaccident027, Hd-Aid
Ddasaccident027, Hd-Aid
Global CWD Repository
An investigation was made by the Deputy Director of the National MA authority and a UN QA officer. They found that the victim had stepped on a PMN on a disused track and suffered traumatic amputation to his left leg below the knee, injuries to his eyes and "small wounds" on his right leg.
Ddasaccident088, Hd-Aid
Ddasaccident088, Hd-Aid
Global CWD Repository
The investigators determined that, after a dog had signalled at a spot, the deminer located a signal with a detector and marked it, then started digging with a pick. His partner warning him to change to a bayonet at the second marker but he ignored the warning. He dug up to the third marker with the pick, so struck the mine. His pick was "destroyed".
Ddasaccident101, Hd-Aid
Ddasaccident101, Hd-Aid
Global CWD Repository
The investigators determined that the victim thought a detector reading was a fragment and was careless when prodding. The mine was identified as a PMN (from "found fragments/pieces"). The victim's bayonet was "lost" and his helmet damaged.
Ddasaccident089, Hd-Aid
Ddasaccident089, Hd-Aid
Global CWD Repository
The investigators determined that the victim was prodding with a bayonet in the squatting position, but was not wearing a frag-vest. He was wearing his helmet when he prodded onto a PMN mine. The victim's bayonet was "lost" and the helmet damaged.
Ddasaccident230, Hd-Aid
Ddasaccident230, Hd-Aid
Global CWD Repository
The document stated that two teams were due to begin demining in adjacent mined areas at Grid reference CQ 088 850. The team commanders held records of the mined area and had a discussion about the accuracy of those records. One of them said the records were inaccurate but that he knew where the mines were. He led two of his men to show them where the mines were. At 10:45 one of the three men surveying the area activated a PROM-1.
Ddasaccident090, Hd-Aid
Ddasaccident090, Hd-Aid
Global CWD Repository
The investigators determined that the victim was working in a bushy clearance lane with continuous detector readings. Because of the continuous reading, he was digging all of the area and prodded with excessive force and let off a PMN. They identified the device by "found fragments". The victim believing that he had touched a tripwire with his bayonet.
Ddasaccident091, Hd-Aid
Ddasaccident091, Hd-Aid
Global CWD Repository
The investigators determined that the victim was clearing an area containing numerous fuzes. Instead of destroying the fuze where it was, he carried the fuze to another place where he "might have" dropped it and caused the accident. The device was identified as a mortar fuze, one among many UXO spread around the area and blast damaged.
Ddasaccident092, Hd-Aid
Ddasaccident092, Hd-Aid
Global CWD Repository
The investigators decided that the accident occurred because the victim ignored technical safety procedures and used a shovel for investigation and prodding purposes. He applied too much pressure on the device and "caused the explosion".
Ddasaccident058, Hd-Aid
Ddasaccident058, Hd-Aid
Global CWD Repository
No accident report was made available. The demining group's country office had no copy. The accident was listed on a simple spreadsheet held by the country MAC.The injury was given as "upper jaw".
Ddasaccident093, Hd-Aid
Ddasaccident093, Hd-Aid
Global CWD Repository
The Investigators determined that the accident occurred when the Assistant Team Leader and the Section Leader went to inspect the site of another accident that had occurred the day before [believed to be 1st June]. They did this without the permission of the Team Leader, and without his being aware of it.
Ddasaccident094, Hd-Aid
Ddasaccident094, Hd-Aid
Global CWD Repository
The investigators determined that the victim was working in an area with barbed wire obstacles (that should have been cut and removed). After going around the wire and detecting again he got a reading. He did not mark the reading but squatted and started to prod with his bayonet, and detonated the mine (which was identified as a PMN from "found fragments".
Ddasaccident095, Hd-Aid
Ddasaccident095, Hd-Aid
Global CWD Repository
The investigators determined that the victim did not centralise the reading point from his detector and "did not follow the marking procedures properly". He prodded while in a squatting position. They noted that the device was identified as a PMN (from "found fragments") and that the victim's helmet and bayonet were "destroyed".
Ddasaccident097, Hd-Aid
Ddasaccident097, Hd-Aid
Global CWD Repository
The investigators determined that the victim got a detector reading and started prodding in a prone position. As he removed loose soil he pulled a tripwire with his hand. A POMZ six metres away was initiated. The device was identified as a POMZ from "found fragments".
Ddasaccident096, Hd-Aid
Ddasaccident096, Hd-Aid
Global CWD Repository
The investigators determined that the victim was checking the boundary land and got a reading with his detector and investigated it with his prodder. He prodded in the squatting position but found nothing. As he stood up to recheck the position with his detector the device went off in front of him.
Ddasaccident098, Hd-Aid
Ddasaccident098, Hd-Aid
Global CWD Repository
The investigators determined that the two victims found a "UXO" fuze while working in a bushy area.
Ddasaccident099, Hd-Aid
Ddasaccident099, Hd-Aid
Global CWD Repository
The investigators determined that the victim was marking the cleared area up to a mine he had uncovered and which was awaiting detonation. It was near the end of the day so he wanted to go off duty after the found mine was destroyed. He dropped a stone close (25cm) to the found mine and the impact detonated another mine close by. His visor was up at the time, so his face was unprotected. The mine was identified as a PMN [presumably by inference].
Ddasaccident232, Hd-Aid
Ddasaccident232, Hd-Aid
Global CWD Repository
The document states that the demining team were working in a gulley in a wooded area. "They had used prodders to prove the ground from which they were lifting mines. They also used detectors to sweep the area to 15m beyond the area which had been prodded". A member of the demining team who had been involved in laying the mines during the war "walked into the area which had been swept by detectors and detonated a PMA-3".
Ddasaccident100, Hd-Aid
Ddasaccident100, Hd-Aid
Global CWD Repository
The investigators determined that the minefield was old and the mines had fallen and become buried. The victim did not mark the detector reading point before investigating with a pick, so triggered the mine which was identified as a POMZ from "fragments found". The victim's pick and helmet were damaged.
Ddasaccident102, Hd-Aid
Ddasaccident102, Hd-Aid
Global CWD Repository
The investigators determined that the victim was clearing the dry bed of a lake [this appears to conflict with "hillside"] and prodded to investigate an area that the dog had indicated. He used his detector then investigated the reading with a pick. The mine was identified as a PMN (from "found fragments"). The victim's pick handle and his visor were damaged. The victim walked out of mined area unaided.
Ddasaccident028, Hd-Aid
Ddasaccident028, Hd-Aid
Global CWD Repository
The accident occurred at 12:30 in a minefield laid by the Portuguese in the early 1970s. The mines were Italian AUPS mines, with and without fragmentation jackets. The demining group had been working in the area since 1996 and 234 AUPS mines had been destroyed. "The minefield crosses the road many times as it is linked as an obstacle with the river which is running along the valley. At the accident site, the minefield following the road alignment at a distance of about six metres on a rocky slope of approximately 35 degrees." Clearance of ten metres had occurred at …
Ddasaccident233, Hd-Aid
Ddasaccident233, Hd-Aid
Global CWD Repository
The document stated that the demining group were working in a wooded area known to be mined. The SFOR monitors offered to lend the group protective equipment but they declined the offer. They did accept the offer of prodders. While prodding a deminer detonated a PMA-3.
Ddasaccident103, Hd-Aid
Ddasaccident103, Hd-Aid
Global CWD Repository
The investigators determined that the victim was clearing a breaching lane bordered by barbed wire. When the wire got in the way too much, he stopped work to pull it aside. In pulling it aside he stepped outside the cleared area and trod on the mine. The mine was believed to be a PMN (from "found fragments") but there was concern expressed that the mine was "an MS3 (anti-lift device)" at the time. The victim's visor was damaged.
Ddasaccident104, Hd-Aid
Ddasaccident104, Hd-Aid
Global CWD Repository
The investigators determined that the victim returned to his breaching lane after the short break and accidentally walked beyond the area he had cleared before the break, where he stepped on a mine. He may have not marked the end of his work properly. The device was identified as a PMN (from "found fragments").
Ddasaccident105, Hd-Aid
Ddasaccident105, Hd-Aid
Global CWD Repository
The victim had been a deminer for seven years. It was five months since his last revision course and 35 days since his last leave. The demining group reported that the victim was digging with a pick when suddenly a PMN mine exploded.
Ddasaccident080, Hd-Aid
Ddasaccident080, Hd-Aid
Global CWD Repository
The victim was part of an advance team which was defining the perimeter of a suspected mined area, with the help of a local guide. The victim was putting in metal markers about 3m away from the existing mined-area boundary stakes. At 09:20 the victim stepped on a mine about 8m away from the existing boundary stakes. He suffered " a cracked bone and bruising to his left foot".
Ddasaccident170, Hd-Aid
Ddasaccident170, Hd-Aid
Global CWD Repository
The victim was the vegetation cutter and prodder man. He cleared 50cm of vegetation at the end of the lane and then handed over to his partner, the detector man. The detector signalled so a marker was put down and the detector man returned to the umbrella. The prodder man investigated the source of the signal and then shouted that he had found a mine. He started to excavate around the mine in preparation for placing a TNT charge next to it. There were a lot of roots around the mine but the victim was not aware that there were …
Ddasaccident171, Hd-Aid
Ddasaccident171, Hd-Aid
Global CWD Repository
A medical report indicated that the accident occurred at 11:50 and the victim was given first aid for 15 minutes. He arrived at Mongkul Borey Provincial Hospital at 12:40. He had suffered a traumatic amputation of his right foot above the ankle, minor fragment wounds along the length of his left leg and superficial wounds on the back of his left hand.
Ddasaccident229, Hd-Aid
Ddasaccident229, Hd-Aid
Global CWD Repository
The team decided that the work had moved away from the direction of the path, so work would start three metres behind the end of the lane and go in a slightly different direction. This was in the area that had been probed, not checked by a dog. The deminers walked to the new start point, then began to return to the change-over point. Victim No.1 was behind Victim No.2 when he stepped on a PMA-2. He suffered a "traumatic amputation" below his right knee. Victim No.2 had "less serious" injuries.
Ddasaccident106, Hd-Aid
Ddasaccident106, Hd-Aid
Global CWD Repository
The investigators determined that the victim was clearing inside a collapsed building. The mines were probably laid on the roof, which had fallen in, so may have been in any position in the ground. The mine was identified as a PMN-2 (from "found fragments"). The victim's visor shattered and a photograph showed jagged fractures and little evidence of blast impact. [This damage implies a twisting force on a brittle plastic, indicating that the visor was probably raised, so explaining the facial injuries.] The deminer's pick was also damaged.
Ddasaccident059, Hd-Aid
Ddasaccident059, Hd-Aid
Global CWD Repository
At 11:10 he initiated the device while kneeling on the ground "carrying out demining". He had "obviously not found" the device when he had cleared the area himself "some minutes earlier". The mine was "very old and rusty which probably caused the malfunction of the mine". "Metal fragments at the scene confirm that the metal in the mine was almost completely corrugated" [presumably the word "corroded" was intended]. The deminer had been working with the "Ebex 420SI" detector [Ebinger] and either found metal near the mine and did not recheck after removing it, or did not calibrate his detector properly. …