Open Access. Powered by Scholars. Published by Universities.®
Public Affairs, Public Policy and Public Administration Commons™
Open Access. Powered by Scholars. Published by Universities.®
- Publication Year
- File Type
Articles 361 - 390 of 849
Full-Text Articles in Public Affairs, Public Policy and Public Administration
Ddasaccident772, Hd-Aid
Ddasaccident772, Hd-Aid
Global CWD Repository
“On the 28th of June 2005 [Demining group] QRT did a bulk demolition before going on stand-down. Most of the ammunition went to high order but 3 grenades went to low order and was destroyed by a second demolition. In one of the sandbags apparently one fuse was stuck after the demolition and was not discovered by the deminers when they checked the area after non exploded devices. The fuse probably went off by the heat from the fire and injured a deminer in his left arm and in his back with small metal pieces.
Ddasaccident538, Hd-Aid
Ddasaccident538, Hd-Aid
Global CWD Repository
After the team had located all metal scrap and rests from the destroyed ammunition by raking the whole demolition area and checking inside the broken sandbags that was used as protection during the demolition, they started to clean the area from the broken sandbags and vegetation. The team started to burn all the collected sandbags and vegetation. In one of the sandbags apparently one fuse was stuck after the demolition and was not discovered by the deminers when they checked the area after non exploded devices. The fuse probably went of by the heat from the fire and injured a …
Ddasaccident755, Hd-Aid
Ddasaccident755, Hd-Aid
Global CWD Repository
Saturday, 7 May 2005, at 10:20 a.m. local time, [Demining group] suffered a mine accident in the manual clearance teams deployed at the Nhaapua site, Chibabava district, Sofala Province, Mozambique. A deminer, working in his lane detonated a AP Gyata mine while conducting manual clearance.
Ddasaccident521, Hd-Aid
Ddasaccident521, Hd-Aid
Global CWD Repository
This accident is classed as a “Missed-mine accident” because the mine was presumably either missed during survey or during clearance. It is presumed that demining group included it in their spreadsheet of demining accidents because the area should have been cleared.
Ddasaccident480, Hd-Aid
Ddasaccident480, Hd-Aid
Global CWD Repository
The team will continue to destroy the bomb and they ordered [the Victim], deminer at the safety point (Pressing point) to bring equipments including C4 and electronic detonator to the SEOD and Section commander to destroy the booster of 750 Lbs . When [the Victim] reached the site and handed over the C4, the section commander ordered him to stay at the safety point. The SEOD and the section leader continued their tasks; the SEOD was explaining how to connect the detonator and preparing the C4. While they placing the C4 on the fuze of the 750 Lbs, they heard …
Ddasaccident520, Hd-Aid
Ddasaccident520, Hd-Aid
Global CWD Repository
Details of this accident have been withheld by the demining NGO that employed the Victim. A spreadsheet including the Victim’s name and very brief details of the accident was made available in 2007. Some details can be inferred from the information released. For example, the limited injury implies that the victim’s PPE was being worn in the correct manner.
Ddasaccident537, Hd-Aid
Ddasaccident537, Hd-Aid
Global CWD Repository
Deminer [the Victim] started demining in his lane no. 47. He set off a P4 MK1 antipersonnel mine with his right foot by stepping on it 07:10 am. Explosion occurred 2 meters from the end of the 27 meter long cleared lane in already cleared area. Deminer fell down to his front. He was not injured except for small scratch in his little finger due to falling. His boots did not suffer any damage.
Ddasaccident546, Hd-Aid
Ddasaccident546, Hd-Aid
Global CWD Repository
[Name removed] and myself were in the same location. 11:00 we started going to MCT teams and the smoke was coming out of demolition point, the team waited until 12:30 then as there was not apparently smoke in the demolition point the TL starting going to the demolition point for checking. And TL saw that both artillery were destroyed. In the nearest point a small amount of smoke was existing. He started to use fork shovel in the location and an explosion happened and a small fragment hit to the Right arm flesh of the TL. The sound and power …
Ddasaccident540, Hd-Aid
Ddasaccident540, Hd-Aid
Global CWD Repository
Deminer [the Victim] used his rake in normal manner. He set off a P4 MK1 antipersonnel mine with his 2-tooth heavy rake. Heavy rake bended but remained in one piece in the blast. Deminer was in perfect health and didn’t get bruises nor other minor injuries.
Ddasaccident533, Hd-Aid
Ddasaccident533, Hd-Aid
Global CWD Repository
At 09.10hrs on the 22nd of September 2004, deminer [the Victim] was carrying out manual clearance using the prodding method on the northern side of Minefield 0011 at Ina Guuxaa. Whilst excavating earth at the front of his lane, he inadvertently detonated what is suspected to have been a P-4 anti personnel mine.
Ddasaccident460, Hd-Aid
Ddasaccident460, Hd-Aid
Global CWD Repository
In a non-marked lane, deminer [Victim No.1] tried to identify the source of a metal-detector signal by using a prodder and an excavation tool. He possibly used the prodder and the excavation tool simultaneously to achieve higher productivity. The star of the PROM-1 was above the ground surface. Therefore it is not likely that the mine was activated with a prodder. It is most likely that it was activated with inappropriate excavation tool. The examination of the area cleared in the days before the accident leads to the conclusion that vertical excavation had been performed, which is characteristic for non-demining …
Ddasaccident416, Hd-Aid
Ddasaccident416, Hd-Aid
Global CWD Repository
There is no definite explanation for how the incident happened. According to deminer, he used his tools slowly and correctly letting the rake to come towards himself by its own weight while pulling. Visual appearance of the incident lane supports this claim. Deminer’s raking tracks are visible, 50 cm in length and symmetrical.
Ddasaccident425, Hd-Aid
Ddasaccident425, Hd-Aid
Global CWD Repository
[Name excised] and [name excised] will be sending you a very detailed report in the next few days. After seeing the site and the deminer I am going to ask him to buy my lottery ticket in the future!!. He was extremely lucky. He detonated an M4 mine 200g HE less than arms length away. He sustained a broken thumb and lacerations of his first two fingers and his face was badly bruised due to the visor hitting him due to the blast effect.
Ddasaccident415, Hd-Aid
Ddasaccident415, Hd-Aid
Global CWD Repository
Experienced deminer uses his rake slowly and in a correct manner according to SOP. Suddenly he sets off an antipersonnel mine with his heavy rake. Heavy rake breaks into two pieces in the blast. Deminer remains in perfect health and doesn’t have bruises nor other minor injuries.
Ddasaccident534, Hd-Aid
Ddasaccident534, Hd-Aid
Global CWD Repository
The incident occurred whilst Deminer [the Victim] was carrying out clearance using the raking method in Lane 9, MF 14, Bisqua. The Investigation team came to the conclusion that the AP mine was disturbed previously by the roots of a tree which is situated approximately 1 meter away from the point of detonation.
Ddasaccident414, Hd-Aid
Ddasaccident414, Hd-Aid
Global CWD Repository
Experienced deminer sets up an antipersonnel mine with his heavy rake. There are two one inch thick bush roots lying horizontally in depth of four centimetres, twenty five centimetres from each other. Antipersonnel mine was situated between the roots. Instead of prodding the spot between the roots, deminer continued raking with heavy rake.
Ddasaccident532, Hd-Aid
Ddasaccident532, Hd-Aid
Global CWD Repository
On the 15th of August 2004 an accident occurred in MF011 in Guuxaa during clearance. [The Victim] was carrying out clearance using the rake method when he detonated a P-4 Anti Personnel Mine.
Ddasaccident431, Hd-Aid
Ddasaccident431, Hd-Aid
Global CWD Repository
The incident is classed as a “Excavation incident” because the victim had hand and leg injury and a photograph shows an accident site that implies the victim was reaching down into a cavity, perhaps with one leg inside the cavity when the fuze was initiated by his activity. The report states that he “hit the detonator” but does not explain what with, so a hand-tool is presumed.
Ddasaccident424, Hd-Aid
Ddasaccident424, Hd-Aid
Global CWD Repository
Team No 2 was working to establish the location and dorecetion of the Mine Strip No 2 in the minefield HM-5 in area Thomaspuri. [The victim] was the Team Leader of Team No 2. One sub team of Team No , under supervision of [the victim] was clearing the working lane. Deminer [name excised] (mine detector operator) located a metal/mine signal. He immediately marked the location and informed the Team Leader. Then he withdrew to a safe distance. [The victim] Team Leader approached the marked location, searched for and recovered an anti-personnel mine P4 Mk1. He tried to neutralize the …
Ddasaccident457, Hd-Aid
Ddasaccident457, Hd-Aid
Global CWD Repository
[The Victim] started the work in lane 1. He worked near a metal barrel half buried in the ground, 1.6 metres from the fence. Before the accident he cleared 2 m2. He wore his PPE and had the necessary tools. He had been removing the undergrowth and surface metal pieces ahead of the base stick. He had been searching with his metal detector and had used the prodder and a trowel. When he worked only with a prodder, he investigated the whole area ahead of the base stick where the vegetation had been removed. Just before the explosion he had …
Ddasaccident459, Hd-Aid
Ddasaccident459, Hd-Aid
Global CWD Repository
The investigators found that the main cause of the accident was “wanton violation of technical and safety procedures proscribed in the SOPs of the organisation and in the National Standards of B&H”. For this reason the primary cause of the accident is listed as a “Management control inadequacy”. So many basic safety rules were being breached at a site where there was known to be a fragmentation mine threat that the conditions must have been known to senior management. The secondary cause is listed as a “Field control inadequacy” because the field managers allowed safety distances and PPE rules to …
Ddasaccident417, Hd-Aid
Ddasaccident417, Hd-Aid
Global CWD Repository
The BOI could not establish conclusively why the accident took place, as no eyewitnesses saw the incident at the time of the explosion. However, it was obvious that the deminer had his visor up at the time of the explosion. Damage and blast marks to the inside of the visor could only have accrued if the visor was up at the time of the explosion. The deminer insisted that the visor was down at the time of the explosion but could give no explanation for why the accident had taken place. It is the opinion of the BOI that the …
Ddasaccident536, Hd-Aid
Ddasaccident536, Hd-Aid
Global CWD Repository
Antipersonnel Mine model P4 mark 1 exploded during mine-clearance in minefield LK-257, Katkovalam. Explosion took place 1,5 meters in front of [Demining group] deminer while he was raking the uncleared lane with heavy rake. Deminer fell backwards to his bottom and lost his hearing and vision for few minutes. His visor (head protection) was hit by little stones and fell off. Fragmentation vest (body protection) took some punches too. After 15 minutes he recovered to mentally and physically normal state. He did not have any wounds, bruises nor pain anywhere in medic’s full body inspection. Nevertheless, he was evacuated against …
Ddasaccident442, Hd-Aid
Ddasaccident442, Hd-Aid
Global CWD Repository
The lane followed a P4 AP blast mine strip where [the Victim] had found three mines the previous day. On the morning of the accident [the Victim] had worked one half hour shift from 07.30 hrs to 08.00hrs before having breakfast from 08.00 hrs to 08.30 hrs. [The Victim] then started his second half hour shift at 08.30hrs, with his half section BD3. The accident took place at 08.40hrs, ten minutes into [the Victim]’s second half hour shift. At the time of the accident [the Victim] was using a heavy rake on the first phase of the three phase raking …
Ddasaccident413, Hd-Aid
Ddasaccident413, Hd-Aid
Global CWD Repository
I am the section leader of Team 07 – 2 Southern Group at 10.15 while we all were at rest area on rest suddenly heard an explosion and saw smoke coming from close to bund. At once I went to the site of the explosion of the spot and I found the water tanker was on uncleared area and with no damage or injury. So I instructed to driver reverse the vehicle using the same track. Driver followed me.
Ddasaccident580, Hd-Aid
Ddasaccident580, Hd-Aid
Global CWD Repository
[The Victim] left [Demining NGO] Camp to personally respond to the information provided by the two children regarding two No 4 anti-personnel landmines on the Umm Serdiba mountain. This was a known minefield and adjacent to a second known mountain also containing landmines in Umm Serdiba. [The Victim] attempted to neutralize two landmines instead of marking and reporting the mines in accordance with established procedures.
Ddasaccident412, Hd-Aid
Ddasaccident412, Hd-Aid
Global CWD Repository
The deminer was working in his clearance lane using a heavy rake to excavate the ground. The ground was very hard and use of the light rake was limited. At approximately 08:55hrs an explosion occurred under the rake.”
Ddasaccident422, Hd-Aid
Ddasaccident422, Hd-Aid
Global CWD Repository
The accident happened at approximately 1015 hours at the [Demining group] Training classroom in Kukes. A KB1 bomblet, presumed to be FFE or inert, and that was in use as a training aid, exploded while being passed hand to hand among the students in the class.
Ddasaccident545, Hd-Aid
Ddasaccident545, Hd-Aid
Global CWD Repository
On May 19, 2004 all deminers were called back to restart clearance operations on the minefield 603 in Darlaman after the first 10 minutes break. [The Victim] also went to his lane and started operations. Using the mine detector he found a signal and marked the area by a red marker. He was setting in kneeling position in an up hill and sloppy [sloping] portion of the field and while he had his personal protective suit and visor on started to prod the area using a bayonet and during the prodding he touched the mine and it went off.
Ddasaccident409, Hd-Aid
Ddasaccident409, Hd-Aid
Global CWD Repository
On the 6th of April 2004 at 1252 hours the WMF Wolf MPV, assisting in route clearance operations on the road from Chiede to Malungo wa Shikongo, set off an anti tank mine. The location of the accident was 34 kms south east of Chiede. The Wolf was supporting [Demining group]'s armoured grader while route-clearance was in progress towards Malungo wa Shikongo.