Open Access. Powered by Scholars. Published by Universities.®
Public Affairs, Public Policy and Public Administration Commons™
Open Access. Powered by Scholars. Published by Universities.®
- Discipline
- Publication Year
- Publication Type
- File Type
Articles 481 - 510 of 634
Full-Text Articles in Public Affairs, Public Policy and Public Administration
Ddasaccident053, Hd-Aid
Ddasaccident053, Hd-Aid
Global CWD Repository
The victim began work at 07:00 and had worked with a ten minute break each hour until 12:34 when the accident occurred. The method involved excavating "to a depth of 20cm using a sideways sweeping motion" with the hoe [pick]. He had found one mine that morning and as he worked forward he encountered a rock ledge at only 5cm depth. He uncovered the rock for three metres until the ledge ended. At the edge of the rock was a tree root that the deminer tried to cut with the hoe. Either the movement of the tree root initiated the …
Ddasaccident140, Hd-Aid
Ddasaccident140, Hd-Aid
Global CWD Repository
The investigators decided that the victim was working with the detector and got a reading. He placed one mark and squatted to prod without wearing his helmet correctly. His bayonet was “destroyed” in the accident.
Ddasaccident025, Hd-Aid
Ddasaccident025, Hd-Aid
Global CWD Repository
There was a safe lane at the bottom of the embankment and deminers were working uphill from it. The victim had been working for fifteen minutes when he decided to clear a wire that was in front of his cleared area. He checked with the Schiebel detector and picked up a reading that he thought was the wire, so ignored it. He entered the uncleared area, cut the wire, and slipped back down the embankment.
Ddasaccident055, Hd-Aid
Ddasaccident055, Hd-Aid
Global CWD Repository
The investigators visited the site on 4th November 1997 and found the deminers clearing a 2m wide verge on both sides of the road. They observed that the deminers were clearing without using marking sticks and at a distance of only 6 metres apart. The victim and his partner began work at 07:30. By 08.50 they had cleared 502 metres. Both men wore frag-jackets, helmet and visor. The victim was clearing by using his prodder. He was called to help his Section Leader remove grass from a large pothole in the road. As he returned at 08:50 he stepped on …
Ddasaccident141, Hd-Aid
Ddasaccident141, Hd-Aid
Global CWD Repository
The investigators determined that the victim had got a detector reading, marked it and then started to excavate using a shovel and without wearing his helmet and visor. They said that during the investigation people pretended the victim has been marking the cleared area when the accident occurred but in the original accident report it was mentioned that the accident occurred during prodding – the investigators decided that "this is their pretext to confuse investigation".
Ddasaccident143, Hd-Aid
Ddasaccident143, Hd-Aid
Global CWD Repository
The investigators determined that a dog had indicated a reading and Victim No.1 used his detector at the site and got two readings 35cm apart. He marked one of the indications and uncovered a MK 7 AT mine. Thinking that the second reading must be a fragment, he began investigating it carelessly and detonated the mine. His bayonet was "lost".
Ddasaccident222, Hd-Aid
Ddasaccident222, Hd-Aid
Global CWD Repository
The investigators concluded that the demining group had insufficient "lead-time" to properly plan the task, that the base-line was not marked and marking of cleared areas was inadequate and that the mine was below the depth that prodding and excavation would normally find it.
Ddasaccident223, Hd-Aid
Ddasaccident223, Hd-Aid
Global CWD Repository
The investigators found no fault with the company's SOPs but said that "insufficient planning and lead-time was allowed for the clearance team to be prepared…". They thought that the "contractual pressure created an atmosphere of unnecessary urgency", that communications between the demining company and the [QA] were inadequate and that the parties involved were all interpreting the contract differently.
Ddasaccident145, Hd-Aid
Ddasaccident145, Hd-Aid
Global CWD Repository
The investigators found that "the ground was suitable for prodding in a prone position, but the victim was performing prodding in the squatting position. During prodding he failed to maintain the correct prodding angle and applied excessive pressure on the mine…it is presumed that the locator of the victim might not have been working properly…" The deminer's visor and glove were damaged, and his bayonet was reported to have been "lost".
Ddasaccident146, Hd-Aid
Ddasaccident146, Hd-Aid
Global CWD Repository
The investigators said that, "When the deminer registered a reading on the detector, he marked the reading and then started prodding in half prone/squatting position. After a few minutes prodding he approached the second marker and the mine went off".
Ddasaccident147, Hd-Aid
Ddasaccident147, Hd-Aid
Global CWD Repository
The investigators determined that the accident occurred when the deminer used only one marking stone to mark a detector signal, then prodded in a squatting position which "failed him to maintain the correct prodding angle". It is suggested that he was careless because he thought he had detected a fragment (having detected many fragments immediately beforehand).
Ddasaccident008, Hd-Aid
Ddasaccident008, Hd-Aid
Global CWD Repository
At 10:30 the victim was walking through the area to reach the rest area when he stood on a mine, thought to be a PMN buried to a depth of about 5cm. The victim suffered a below knee amputation to his left leg and minor injuries to both arms and legs.
Ddasaccident138, Hd-Aid
Ddasaccident138, Hd-Aid
Global CWD Repository
The accident area was undulating and steep with dry earth and rock. The team had found "many" PMNs in the area prior to the accident. The deminer was clearing a safe-lane and was using a prodder to inspect a reading when a PMN exploded at 11:20. He suffered minor blast injuries to his neck and chin as well as small injuries to both hands in the dorsal area and his right shoulder. His visor and helmet took most of the blast. The victim walked out of the accident area and was taken to the Emergency hospital in Sulymania along with …
Ddasaccident224, Hd-Aid
Ddasaccident224, Hd-Aid
Global CWD Repository
The team were finishing their shift for the day and the victim was asked to mark the edge of the area that had been surveyed that day. As he walked to that point he trod on an undetected PMA-3. The victim was later told that the mine had been laid too deep for the detectors to locate. The victim was wearing military boots, leggings, a frag-jacket, and a helmet & visor.
Ddasaccident148, Hd-Aid
Ddasaccident148, Hd-Aid
Global CWD Repository
The investigators determined that Victim No.1 was scratching a mark to show the end of the breaching land outside the area actually cleared (he should have left a 50cm safety margin the other way) when his bayonet pulled the tripwire attached to the mine. The mine was three metres away from the deminer when it was initiated. They thought that Victim No 2 did not maintain the proper safety distance and so was hit by some fragments.
Ddasaccident149, Hd-Aid
Ddasaccident149, Hd-Aid
Global CWD Repository
The investigators determined that the victim did not use a tripwire feeler before using the detector, despite the known presence of tripwire mines. They decided that he then moved the detector head quickly and so pulled a tripwire with it.
Ddasaccident150, Hd-Aid
Ddasaccident150, Hd-Aid
Global CWD Repository
The investigators determined that the victim investigated a signal and found part of the handle of a metal spoon. When checking the spot again, the detector signalled again and the deminer did not re-mark the signal properly because he thought the signal would be from the rest of the spoon. He prodded in a squatting position and initiated the mine with his bayonet – which was "destroyed".
Ddasaccident237, Hd-Aid
Ddasaccident237, Hd-Aid
Global CWD Repository
The document stated that the victim had been recently trained by the group he was working with. He was working in an area known to contain PMA-1 and PMA-3 mines. He was not wearing a helmet and visor and was prodding for mines. He was prodding with "a vertical stabbing motion" when he detonated a PMA-3.
Ddasaccident167, Hd-Aid
Ddasaccident167, Hd-Aid
Global CWD Repository
The working area was covered with dense vegetation and the clearance work involved the removal of thick bushes and small trees. The victim had been working as the vegetation cutter and prodder man on the morning of the accident and had completed the clearance of his lane just before the lunch break. As he was returning he noticed that one of the stakes holding the marking tape was not straight so he attempted to put it right by pulling the tape. In trying to do so he walked along a fallen log near the edge of the lane but his …
Ddasaccident225, Hd-Aid
Ddasaccident225, Hd-Aid
Global CWD Repository
At 12:40 the two victims were at an appropriate place to site a spur, so the Team Leader instructed them to start a lane off to the left. The deminers changed roles, exchanging leggings and marking tape when they did so [only one set of leggings was issued per pair of deminers]. As Victim No.2 was withdrawing his partner asked him to pass the machete. He returned and did so, then walked away again. He was about five metres away when the mine detonated.
Ddasaccident151, Hd-Aid
Ddasaccident151, Hd-Aid
Global CWD Repository
The investigators determined that the deminer located a tripwire and informed his superiors. Correct procedure required that the wire be pulled from a safe distance. The deminer pulled the wire from 30 metres while in a standing position.
Ddasaccident168, Hd-Aid
Ddasaccident168, Hd-Aid
Global CWD Repository
The victim was a prodder man and he and his partner had already cleared about 20m and had found about 30 fragments. At 08:30 the victim was returning along the lane after clearing some vegetation and trod on a mine that was about 11m into the lane.
Ddasaccident226, Hd-Aid
Ddasaccident226, Hd-Aid
Global CWD Repository
A local farmer had reported a UXO to the police. The team located the farmer, then parked their vehicle 50m from the accident site and walked with the farmer towards the suspected UXO. The farmer entered the field with Victim No.1 following. The farmer indicated the rough direction of the device and Victim No.2 moved up behind him. All three began to search, all within 1.5 metres of each other. The medic returned to the vehicle to be near to the medical kit. "Statements indicate that at the moment of detonation Victim No.1 bent over slightly and the other two …
Ddasaccident152, Hd-Aid
Ddasaccident152, Hd-Aid
Global CWD Repository
The investigators determined that the victim was clearing a breaching lane. He got a detector reading, marked it with a single stone, and began to prod in a squatting position. During prodding he initiated the mine. The victim was wearing a helmet and visor.
Ddasaccident153, Hd-Aid
Ddasaccident153, Hd-Aid
Global CWD Repository
The investigators decided that the victim had got a reading with his detector and investigated it but found nothing. He swept the area again and still got a reading, so without remarking the spot, he squatted to prod again [presumed to have been wearing his helmet and visor].
Ddasaccident154, Hd-Aid
Ddasaccident154, Hd-Aid
Global CWD Repository
The investigators decided that the two victims were assigned a breaching lane to clear. Victim No.1 was eager to finish investigating a signal when a rest period was announced, so hurried and used excessive force. Victim No.2: was not maintaining the safety distance required and was also injured.
Ddasaccident012, Hd-Aid
Ddasaccident012, Hd-Aid
Global CWD Repository
The victim had last attended a revision course seven months before and had last been on leave eight days before the accident. The accident occurred on ground described as soft agricultural land. A photograph showed the ground which appeared to be dust on top of compacted fine-silt.
Ddasaccident234, Hd-Aid
Ddasaccident234, Hd-Aid
Global CWD Repository
The Team Commander knew that there were mines present. "After thorough checking [he] had ordered the removal of 15cm of topsoil, followed by a second 15cm. The mine was still 15cm below the surface. This was too deep for the detector to pick it up and too deep for the prodder to reveal its presence… the ground compacted under his weight and set off the mine."
Ddasaccident078, Hd-Aid
Ddasaccident078, Hd-Aid
Global CWD Repository
The Team leader was preparing to destroy the discovered mines when he was injured in the first mine accident on the site that day [See accident No.227]. After the Supervisor had dealt with that accident he went looking for the deminer who had found the mines, intending to appoint him as the acting Team Leader.
Ddasaccident077, Hd-Aid
Ddasaccident077, Hd-Aid
Global CWD Repository
A deminer [the victim in a later accident on the same day] began clearance and located a PMN. He informed the Team Leader and then continued work and located another two PMNs. He then moved to the end of the clearance lane and found a further three PMNs. As he worked he marked the lane by taking markers from the right side and putting them on the left side. Each of the discovered mines was marked with a wooden picket.