Open Access. Powered by Scholars. Published by Universities.®

Articles 421 - 450 of 1444

Full-Text Articles in Public Affairs, Public Policy and Public Administration

Linking Mine Action And Development | States Affected By Mines/Erw, Gichd Nov 2009

Linking Mine Action And Development | States Affected By Mines/Erw, Gichd

Global CWD Repository

Mine action programmes often are not linked early and strongly enough with key development actors. Despite the availability of extensive research documenting the need for greater coordination between mine action and development organisations, concrete guidance for practitioners and policy-makers on how to link mine action with development has been lacking. In response, the Geneva International Centre for Humanitarian Development has published guidelines on how to ensure mine action promotes development in mine-affected countries. More specifically, the guidelines seek to:

  • Increase awareness that landmines and other remnants of conflict block development in many affected countries
  • Strengthen coordination between mine action and …


Ddasaccident601, Hd-Aid Nov 2009

Ddasaccident601, Hd-Aid

Global CWD Repository

On 1st Nov 2009, at 02:45 pm during the rest time, [the Victim] a deminer of mentioned team found an unknown item and tried to touch it. According to the investigation report, the item was a rifle Grenade of 40mm which was exploded as a result of irresponsible action of the victim deminer. As it was the break time of the team and the deminer was without visor and PPE, therefore, he lost his right hand, left eye and sustained jaw and leg fracture.


Ddasaccident708, Hd-Aid Oct 2009

Ddasaccident708, Hd-Aid

Global CWD Repository

The 39-year-old [the Victim], a MACC member from Mozambique, died after an anti-tank mine exploded at approximately 8am yesterday in a minefield near Yeri, some 10 kilometres south-east of Nicosia.


Ddasaccident646, Hd-Aid Oct 2009

Ddasaccident646, Hd-Aid

Global CWD Repository

On 11 Oct 2009 at 12:15 am while [the Victim] deminer was excavating a detected signal in his clearance lane, his bayonet hit top of an anti-personnel mine and caused it to go off. According to the investigation report, it seems that the deminer started the excavation drill directly from the centre of the detected signal by his bayonet and caused the mine to be exploded. The deminer had the PPE and visor but as the visor was not properly used so he got some superficial injuries on his face, eyes.


Ddasaccident641, Hd-Aid Oct 2009

Ddasaccident641, Hd-Aid

Global CWD Repository

On 10 Oct 2009 at 11:20 hrs when [the Victim] deminer was working in his clearance lane with a pickaxe that suddenly an explosion happened. As per investigation report the deminer was using pickaxe instead of bayonet because the ground surface was hard. He started to prepare a trench by pickaxe from second reading marker for further investigation of the signal, but there was a stone in close vicinity of pinpointed spot and the deminer wanted to remove it, so his pickaxe might touched the PMN mine or the stone put extra pressure on the mine and the explosion happened. …


Ddasaccident613, Hd-Aid Oct 2009

Ddasaccident613, Hd-Aid

Global CWD Repository

On 04 Oct 2009 at 08:35 hrs when [the Victim] deminer was working on a signal in his clearance lane using a pickaxe, he hit the mine on its top and caused it to go off. According to the investigation report the ground surface was hard and the deminer was using the pick without informing his section leader with a wrong procedure for excavation of the detected signal, and caused the mine to be exploded. As a result of the accident, the involve deminer got superficial injures on his face and body.


Knowledge, Attitudes And Practices For Risk Education: How To Implement Kap Surveys, Hi Oct 2009

Knowledge, Attitudes And Practices For Risk Education: How To Implement Kap Surveys, Hi

Global CWD Repository

The KAP is a representative survey conducted on a particular population to identify the knowledge (K), attitudes (A) and practices (P) of a population on a specific topic – landmines and Explosive Remnants of War (ERW) in our case. In the majority of KAP studies, data are gathered orally by an interviewer who uses a structured, standardised questionnaire. These data can then be quantitatively or qualitatively analysed according to the objectives and the ins and outs of the survey. A KAP survey can be specially designed to collect information on the issue of, but it is also possible to include …


Ddasaccident701, Hd-Aid Sep 2009

Ddasaccident701, Hd-Aid

Global CWD Repository

While the deminer was working in recovering one of the SMLs in Al Akaider 2 laid with 15 AP mines (M14) and after recovering 9 mines from the same SML and locating a signal in the predicted site for the 10th mine, the signal was strong and continuous which confused the deminer and there is no way to pin point an M14 mine at that area, the deminer start excavating the area from a depth for 40 cm using the heavy RAKE , the soil at that area hard that the deminer was using the RAKE in a hacking motion …


Ddasaccident670, Hd-Aid Sep 2009

Ddasaccident670, Hd-Aid

Global CWD Repository

While the deminer was working in his lane by the end of the working day, he tried to move one AP (M35) mine partially covered in the ground against of the TL instructions using the light RAKE, the mine initiated 1.8 m away from the deminer and caused the wounds and the mentioned injures to the deminer that he wasn’t wearing the visor in the proper way


Ddasaccident657, Hd-Aid Sep 2009

Ddasaccident657, Hd-Aid

Global CWD Repository

On 14 September 2009, a deminer of CBDT-06 was busy in his clearance lane, he detected an unknown device and informed his respective section leader who had 18 year demining experience to check it. The section leader took the device with his left hand from the clearance lane, he started to remove the soil from it, but in this time it was exploded and caused injuries to his left hand fingers. Unprofessional dealing with unknown device caused this accident.


Ddasaccident628, Hd-Aid Sep 2009

Ddasaccident628, Hd-Aid

Global CWD Repository

Deminer was clearing the first 60 cm of one cluster heading toward the centre mine after he cleared the 1st 60 cm by one 1m width with no signals he moved his base stick a head to clear the next 60 cm, then he stepped on the area which considered to be cleared by the same deminer, accidently his foot went down due to the soil collapse under his foot (loose soil), the mine was in a depth of about 30 cm that when the deminer foot dived in the loosen soil he applied a pressure on the mine which …


Ddasaccident624, Hd-Aid Sep 2009

Ddasaccident624, Hd-Aid

Global CWD Repository

The primary cause of this accident is listed as a Field Control inadequacy because the investigators found that there was poor supervision at the time of the accident. The secondary cause is listed as Other because there is not enough detail in the summary to determine what the deminer was doing, and what tool he was using.


National Mine Action Strategy Of The Republic Of Croatia, Gichd Sep 2009

National Mine Action Strategy Of The Republic Of Croatia, Gichd

Global CWD Repository

In the course of mine action in the Republic of Croatia so far, the most important and most represented activity has been conducting humanitarian demining operations. Since the very beginning of systematic pursuit of demining problem area, the basic issue has always been the question of defining suspected hazardous area. True development of demining capacities starts with the establishment of the Croatian Mine Action Centre and amendments to the Law on Demining by which the market model was introduced.


Ddasaccident702, Hd-Aid Aug 2009

Ddasaccident702, Hd-Aid

Global CWD Repository

On 28 July 2009 at 08:10 hrs when Ahmed de-miner was working on a signal in his clearance lane by using a pickaxe instead of bayonet, he hit the mine on its top and caused it to go off. According to the investigation report the ground surface was uneven, hard and impossible to work in sitting position, so he has started to investigate the signal in standing position. This was the main reason of initiating mine and accident.


Ddasaccident669, Hd-Aid Aug 2009

Ddasaccident669, Hd-Aid

Global CWD Repository

Deminer Was Clearing the first 60 cm from the centre lane on a depth of 30 cm using the heavy RAKE after he done with the light rake , deminer hit the M14 mine on a depth of 35 cm by the heavy rake which initiate the mine. [The depth appears to be an error, and should perhaps be 15cm.]


Ddasaccident649, Hd-Aid Aug 2009

Ddasaccident649, Hd-Aid

Global CWD Repository

On 13 August 2009 at 07:15 am while [the victim] deminer was excavating a excavating a dog indication in an access lane, his pick touched on the top of PMN 2 anti-personnel mine and caused it to go off. According to the investigation report the deminer has used the pickaxe to investigate the signal found in dog indication instead of the bayonet and it seems as he used the pick directly on the top of signal, so hit the mine and caused the accident. From the location of injuries it seems the deminer has not used his PPE and visor …


Ddasaccident642, Hd-Aid Aug 2009

Ddasaccident642, Hd-Aid

Global CWD Repository

While the deminer was clearing the lane from stones using the light rake he removed the stones not behind him but he conducted a violation of drill and he threw the stones to the left side of the safe lane and one of the stone hit the unknown mine 12 meters forward to the Syrian side at IOE to the contaminated area resulting mine blast.


Report On The Feasibility Of Anama Establishing An International Centre For Mine Action In Goygol, Azerbaijan, Bruce Powell Aug 2009

Report On The Feasibility Of Anama Establishing An International Centre For Mine Action In Goygol, Azerbaijan, Bruce Powell

Global CWD Repository

The following report documents the findings and recommendations of a feasibility study commissioned by UNDP under the mantle of its ongoing support to mine action in Azerbaijan. As recommended in a 2008 UNDP outcome evaluation, the study was tasked with examining the “existing capacities of ANAMA, as well as techniques and facilities to recommend on the possibility of converting ANAMA to an International Center for Mine Action (IMC)”1.

The report provides an overview of ANAMA‟s current operational capacity, training capability, and likely market niches that an IMC based in Azerbaijan could fill. It also describes the principal field of existing …


Handheld Standoff Mine Detection System (Hstamids) Operational Field Evaluations (Ofe's) In Cambodia, Sean Burke, Roger Cresci Aug 2009

Handheld Standoff Mine Detection System (Hstamids) Operational Field Evaluations (Ofe's) In Cambodia, Sean Burke, Roger Cresci

Global CWD Repository

The Handheld Standoff Mine Detection System is a dual sensor mine detector. It was developed for the US Army and combines Metal Detector and ground penetrating radar. This system has produced vast improvements in mine clearance rates.


Evaluation Of Ec Funded Mine Action Programmes In Latin America, 2002-2007 - Regional Report, Russell Gasser Aug 2009

Evaluation Of Ec Funded Mine Action Programmes In Latin America, 2002-2007 - Regional Report, Russell Gasser

Global CWD Repository

The EC Anti-Personnel Landmine Regulation of 2001 mandated evaluations of EC Mine Action strategy every three years. The first report was a Global Evaluation published in 2005, this report forms one part of the 2008 evaluation by regions and covers Latin America, 2002-2007.

Total EC funding for mine action in Latin America in the period 2002-2007 was about 8 million euros, roughly 2% of the EC total worldwide budget for mine action. Sixty-eight percent of the eight million euros was from the dedicated thematic Anti-Personnel Landmine budget line and 31% was from the geographic budget for Colombia. There were also …


Ddasaccident705, Hd-Aid Jul 2009

Ddasaccident705, Hd-Aid

Global CWD Repository

The deminer was looking for a missing mine (M14) in the cluster and the metal detector indicated a very weak signal, the deminer started to investigated that signal then the mine initiated that the deminer wasn’t following the proper procedure to approach the mine


Ddasaccident681, Hd-Aid Jul 2009

Ddasaccident681, Hd-Aid

Global CWD Repository

On 21 July 2009 while deminer [the Victim] was working in his clearance lane, investigating a detected signal with his hand trowel, he hit a mine on its top and caused it to go off. The weather was hot and the ground surface was hard and dry, so it seems that the deminer had used his excavation tool by force and carelessly and directly on pinpointed spot so touched the top of mine and caused the accident. As the deminer was dressed with PPE (vest, helmet and visor according to [Demining group] SOPs), so his face, neck and chest remained …


Ddasaccident675, Hd-Aid Jul 2009

Ddasaccident675, Hd-Aid

Global CWD Repository

Narrative: While the deminer was trying to investigate a signal using the heavy RAKE and after he pinpointed it , and finished with the light RAKE the deminer hit the non visible AP mine (M14) by the heavy RAKE on the pressure plate which initiated the mine 2.2 metres away from the deminer.


Ddasaccident671, Hd-Aid Jul 2009

Ddasaccident671, Hd-Aid

Global CWD Repository

The burner prepared one MK5 stuck mine inside the stuck mine burning pit; he burned the mine in the right procedure and lift the burning area to a safe distance. The mine took a long waiting time to be burned that caused the deminer to go back to the burning area to check the reason, on his way back to the burning area the MK5 stuck mine blasted and small fragments hit the burner in his chin and face and caused the some injuries.


Ddasaccident752, Hd-Aid Jul 2009

Ddasaccident752, Hd-Aid

Global CWD Repository

On 1st July 2009 MU-16 of [Demining group] started clearance operation on mentioned task. On 08 July 2009 at 0919hrs while [the Victim] was investigating a signal in his clearance lane, he found two bullets. He re-checked the spot and found the same signal, this process repeated for three times. Finally he found a root stump in the excavation trench with a thickness of around 2.5 cm and started to remove it, because it was blocking further excavation there. However the deminer had proper tool in his toolkit to cut such obstacles, but he tried to cut it with his …


Ddasaccident623, Hd-Aid Jul 2009

Ddasaccident623, Hd-Aid

Global CWD Repository

The incident caused by individual mistake while the deminer using the heavy RAKE in a hacking motion not as the proper procedure the Raking motion, and most of the mines in the area are surfaces mines that they can be recovered just with the usage of the light RAKE even if that will cost the deminer more sweat but it will still safer.


Ddasaccident604, Hd-Aid Jul 2009

Ddasaccident604, Hd-Aid

Global CWD Repository

While the deminer try to investigate a signal in lane 15 (12 O’clock mine) he didn’t approached the mine in the proper procedure which caused the deminer to hit the mine from the top of the pressure plate and initiate the mine 2.2 m away from the deminer (the distance of the heavy RAKE).


Ddasaccident824, Hd-Aid Jul 2009

Ddasaccident824, Hd-Aid

Global CWD Repository

On 1st July 2009 at [International demining organisation] BAC Task CBU-681, a detonation of a US M series submunition occurred while [the Victim] an [International demining organisation] Searcher ID No. LS 444 was conducting subsurface search and excavating the signals. [The Victim] sustained injuries in his left arm, little finger.

Based on all available evidence, the BOI team concludes that the immediate response to the accident by the team leader and the treatment by the medic enabled an effective casevac and subsequent medevac from the task to Najdeh hospital in Nabatiyeh. Supervised by both the TFM and Site Supervisor.


To Walk The Earth In Safety 8th Edition (Fy2008), Us Dos Pm/Wra Jul 2009

To Walk The Earth In Safety 8th Edition (Fy2008), Us Dos Pm/Wra

Global CWD Repository

Welcome to the 8th edition of To Walk The Earth In Safety. Although we have seen real progress in combating the threat of mines and explosive remnants of war (ERW), conflicts persist, and the destabilizing effects of other weapons threaten peace and stability around the world.

The United States works with other nations to clean up the debris of war, combat trafficking in small arms and light weapons, and improve the security and management of munitions stockpiles. Catastrophic explosions at munitions storage facilities in populated areas have become a growing problem and have the potential to create more casualties than …


Ddasaccident712, Hd-Aid Jun 2009

Ddasaccident712, Hd-Aid

Global CWD Repository

On 18 April 2009 [Demining group] DT-05 started clearance operation on mentioned task, they cleared around 19830 sqm area and found/destroyed 4 anti-personnel mines and 2 UXO till the accident time. On 27 June 2009 at 11:15 am the deminer [the Victim] was working in his clearance lane, he found a signal behind some stones, the investigation of signal was impossible with bayonet so he informed the section leader and sought his advice. Section leader instructed him to use pick, but a stone in front of pinpointed signal did not let the pick to be used easily. Therefore, the deminer …