Open Access. Powered by Scholars. Published by Universities.®
Social and Behavioral Sciences Commons™
Open Access. Powered by Scholars. Published by Universities.®
Articles 1 - 30 of 37
Full-Text Articles in Social and Behavioral Sciences
Ddasaccident696, Hd-Aid
Ddasaccident696, Hd-Aid
Global CWD Repository
The investigation team concluded that the contributing factor to this accident was carelessness of deminer in terms of started excavation on the top of the detected signal, and poor command and control by acting team leader.
Ddasaccident660, Hd-Aid
Ddasaccident660, Hd-Aid
Global CWD Repository
The primary and secondary causes of this accident are listed as Other because the accident summary lacks enough detail to infer anything useful about the events surrounding the accident.
Ddasaccident637, Hd-Aid
Ddasaccident637, Hd-Aid
Global CWD Repository
The incident involved [the Victim] detonating an anti-personnel mine whilst excavating a contact. The investigation report is to be submitted by 18 December 2008. In the event that the completed report is not able to be submitted on the date indicated an interim report outlining progress with the investigation and the reason for the delay is to be submitted on that date and further interim reports provided every (two) days until the completed investigation report is submitted.
Ddasaccident607, Hd-Aid
Ddasaccident607, Hd-Aid
Global CWD Repository
The primary cause of this accident is listed as Inadequate training because it seems that the Victim started excavating on top of the mine. He may not have known how to pinpoint the detector reading appropriately, or may not have been instructed in safe excavation techniques. The secondary cause is listed as a Field Control Inadequacy because the investigators found that the field supervisors did not give appropriate information about the task site and did not correct his errors.
Ddasaccident770, Hd-Aid
Ddasaccident770, Hd-Aid
Global CWD Repository
On 30 December 2008 deminer de- miner [the Victim] was busy in excavation of a detected signal in his clearance lane, his scraper touched on the top of a mine and caused it to explode.
Ddasaccident634, Hd-Aid
Ddasaccident634, Hd-Aid
Global CWD Repository
The accident occurred because of carelessness of the deminer as he used chisel directly on the detected signal instead of [Demining group] standard excavating tool (scraper). The poor command and control is another contributing factor for this accident as he was not stopped by command group.
Ddasaccident612, Hd-Aid
Ddasaccident612, Hd-Aid
Global CWD Repository
The primary cause of this accident is listed as Inadequate training because the investigators found that the Victim did not know how to excavate safely. The secondary cause is listed as a Management Control Inadequacy because it is a management responsibility to ensure that all deminers are appropriately trained.
Ddasaccident605, Hd-Aid
Ddasaccident605, Hd-Aid
Global CWD Repository
The primary cause of this accident is listed as a Field Control Inadequacy because the investigators concluded that there was poor command and control. The injury spread, including forehead and body, implies that PPE was not being worn at the time. The secondary cause is listed as Inadequate training because it seems that the deminer either did not know how to pinpoint a detector reading adequately or did not understand the risks of digging directly on top of the place where the detector signalled.
Ddasaccident700, Hd-Aid
Ddasaccident700, Hd-Aid
Global CWD Repository
As it was a difficult task for the clearance, and required extra attention and care of command group and deminers themselves, thus the carelessness of deminer was the main contributing factor to this accident. The consequence of this accident is a slight injury to the finger of deminer which indicates that he was fully dressed with PPE.
Ddasaccident694, Hd-Aid
Ddasaccident694, Hd-Aid
Global CWD Repository
Carelessness of deminer and poor supervision in terms of not conducted QC, caused the accident, and happened.
Ddasaccident691, Hd-Aid
Ddasaccident691, Hd-Aid
Global CWD Repository
The negligence of deminer in terms of not adhering to set procedure for excavation and the failure of command group in order to control the deminer and stop him from wrong practice is the contributing factors for this accident
Ddasaccident673, Hd-Aid
Ddasaccident673, Hd-Aid
Global CWD Repository
Refering to other accidents with this demining group at this period, the Victim may have been using a “pick”. Whatever tool the Victim was using, it is likely that he did not pinpoint the detector signal correctly and so began excavating on top of the mine.
Ddasaccident636, Hd-Aid
Ddasaccident636, Hd-Aid
Global CWD Repository
The accident occurred because of carelessness of the deminer as he used chisel directly on the detected signal instead of [Demining group] standard excavating tool (scraper). The poor command and control is another contributing factor for this accident as he was not stopped by command group.
Ddasaccident674, Hd-Aid
Ddasaccident674, Hd-Aid
Global CWD Repository
The primary cause of this accident is listed as a Field Control Inadequacy because the investigators determined that poor command and control was a cause. The secondary cause is listed as Other because there is too little detail in the summary to be able to assess what occurred.
Ddasaccident656, Hd-Aid
Ddasaccident656, Hd-Aid
Global CWD Repository
It is unusual for a severe foot injury to occur during excavation. The Victim must have been standing or squatting and, despite mention of a “trowel”, he may have been using the ubiquitous “pick”. The Inadequate equipment listed under Notes refers to the use of inappropriate tools, as identified by the investigators. If he was using a trowel, it is likely that he did not pinpoint the detector signal correctly and so began excavating on top of the mine, as has been reported with several other accidents in this theatre at this time.
Ddasaccident704, Hd-Aid
Ddasaccident704, Hd-Aid
Global CWD Repository
It is the conclusion of the investigation team that the carelessness of involved deminer, use of wrong tool for excavation and poor supervision caused the accident happened.
Ddasaccident688, Hd-Aid
Ddasaccident688, Hd-Aid
Global CWD Repository
It is the conclusion of the investigation team that the carelessness of involved deminer, poor command and control and deviation from SOPs caused the accident happened.
Ddasaccident780, Hd-Aid
Ddasaccident780, Hd-Aid
Global CWD Repository
On 22 August 2008 while de-miner [the Victim] was working in his clearance lane from up downward direction. He used scraper as a standard tool for excavation, but the area was hard and bushy. The de-miner hit the mine directly on its top during excavation and caused the explosion. However the deminer had worn his PPE but has got some injuries on his finger and arm of his right hand.
Ddasaccident665, Hd-Aid
Ddasaccident665, Hd-Aid
Global CWD Repository
On 17 August 2010 [the Victim] the deminer was working in his clearance lane excavating a detected signal, his excavation tool touched a mine and caused it to explode. According to the investigation report the signal was not pinpointed correctly and the deminer has used his bayonet directly on the top of anti-personnel mine, so the accident happened. Unfortunately the victim deminer was not fully dressed with PPE, so he got severe injuries on his eyes, whole face and finger of his left hand.
Ddasaccident616, Hd-Aid
Ddasaccident616, Hd-Aid
Global CWD Repository
The primary cause of this accident is listed as a Field Control inadequacy because the investigators found that there was poor supervision at the time of the accident. The secondary cause is listed as Other because there is not enough detail in the summary to determine what the deminer was doing, and what tool he was using.
Ddasaccident615, Hd-Aid
Ddasaccident615, Hd-Aid
Global CWD Repository
It is the conclusion of the investigation team that the carelessness of involved deminer, poor supervision and denying of mechanical asset by government authority are the main factors for the accident happened. The rule of supervision is vital in such a difficult task and can prevent the accidents.
Ddasaccident611, Hd-Aid
Ddasaccident611, Hd-Aid
Global CWD Repository
It is the conclusion of the investigation team that the involved deminer did not properly find the centre of the signal because of extra soil accumulated there, and thus started excavation directly from the top of the signal by force, which caused the accident happened.
Ddasaccident685, Hd-Aid
Ddasaccident685, Hd-Aid
Global CWD Repository
The primary cause of this accident is listed as a Field Control Inadequacy because the Victim was working with his visor raised and using a pick and his error was not corrected. The secondary cause is listed as a Management Control Inadequacy because the demining group’s management is responsible for ensuring that field supervisors prevent deminers from breaching approved SOPs.
Ddasaccident680, Hd-Aid
Ddasaccident680, Hd-Aid
Global CWD Repository
The primary cause of this accident is listed as Other because there is not enough information to draw any conclusion about the cause of the accident. The secondary cause is listed as a Management Control Inadequacy because the spreadsheet summary includes no details or injury or conclusions and is virtually useless, which is a UN MACCA responsibility.
Ddasaccident639, Hd-Aid
Ddasaccident639, Hd-Aid
Global CWD Repository
The primary cause of this accident is listed as a Field Control Inadequacy because the Victim was working with his visor raised and using a pick and his error was not corrected. The secondary cause is listed as a Management Control Inadequacy because the demining group’s management is responsible for ensuring that field supervisors prevent deminers from breaching approved SOPs.
Ddasaccident630, Hd-Aid
Ddasaccident630, Hd-Aid
Global CWD Repository
The primary cause of this accident is listed as a Field Control Inadequacy because the investigators found that there was inadequate field supervision at the time of the accident. The secondary case is listed as a Management Control Inadequacy because it is the senior management’s responsibility to ensure that there is adequate field supervision on site at all times.
Ddasaccident603, Hd-Aid
Ddasaccident603, Hd-Aid
Global CWD Repository
The primary cause of this accident is listed as a Field Control Inadequacy because the Victim was working with his visor raised (or not worn) and using a pick to investigate a metal-detector reading incautiously. The secondary cause is listed as Inadequate equipment because no alternative to a pick for starting a safe excavation in hard ground was made available.
Ddasaccident609, Hd-Aid
Ddasaccident609, Hd-Aid
Global CWD Repository
The accident has occurred because of error made by the involved deminer as he used chisel directly on the detected signal instead of [Demining group] standard excavating tool (scraper). Chisel is used for excavating of safe margin of the reading points, meaning 15 cm behind the start point of signal.
Ddasaccident672, Hd-Aid
Ddasaccident672, Hd-Aid
Global CWD Repository
The accident has occurred because of error made by the involved deminer as he wanted to remove a piece of wire and a steel bar without taking the precautionary measures into consideration. He should not have removed them by hand but either pulling practice or using machine should have been practiced.
Ddasaccident600, Hd-Aid
Ddasaccident600, Hd-Aid
Global CWD Repository
The primary cause of this accident is listed as a Field Control Inadequacy because the Victim was working in a way that was unsafe and his error was not corrected. The secondary cause is listed as “Unavoidable” because there is not enough detail available to determine what really happened and it may be that the deminer was working as instructed when the accident occurred. If this is the case, the Field Managers bear considerable responsibility for not having learned from a similar accident involving this demining group only a few weeks previously. The repetition of the deminer working well outside …