Physics Commons^™

Correct Spectral Conversion Between Surface‐Enhanced Raman And Plasmon Resonance Scattering From Nanoparticle Dimers For Single‐Molecule Detection, Kyuwan Lee

Kyuwan Lee

Simultaneous measurement of surface-enhanced Raman scattering (SERS) and localized surface plasmon resonance (LSPR) in nanoparticle dimers presents outstanding opportunities in molecular identification and in the elucidation of physical properties, such as the size, distance, and deformation of target species. SERS–LSPR instrumentation exists and has been used under limited conditions, but the extraction of SERS and LSPR readouts from a single measurement is still a challenge. Herein, the extraction of LSPR spectra from SERS signals is reported and a tool for measuring the interparticle distance from Raman enhancement data by the standardization of the SERS signal is proposed. The SERS nanoruler …

Structure And Dynamics Of High Temperature Superconductors, Jennifer Lynn Niedziela

Doctoral Dissertations

High temperature superconductivity in iron based compounds has presented a series of complex problems to condensed matter physics since being discovered in 2008. The stalwart basis of condensed matter physics is the “strength in numbers" aspect of crystalline periodicity. Perfect crystalline periodicity has made possible the reduction of the questions of structural and electronic properties to single dimensions, increasing the tractability of these problems. Nevertheless, modern complex materials stretch these assumptions to their limits, and it is at this point where our work starts. Using neutron and x-ray scattering, we have conducted a series of studies on the structural disorder …

Modelling Three-Phase Flow In Metallurgical Processes, Christoph Goniva, Gijsbert Wierink, Kari Heiskanen, Stefan Pirker, Christoph Kloss

Gijsbert Wierink

The interaction between gasses, liquids, and solids plays a critical role in many processes, such as coating, granulation and the blast furnace process. In this paper we present a comprehensive numerical model for three phase flow including droplets, particles and gas. By means of a coupled Computational Fluid Dynamics (CFD) - Discrete Element Method (DEM) approach the physical core phenomena are pictured at a detailed level. Sub-models for droplet deformation, breakup and coalescence as well as droplet-particle and wet particle-particle interaction are applied. The feasibility of this model approach is demonstrated by its application to a rotating drum coater. The …

Development Of A Novel Technique For Predicting Tumor Response In Adaptive Radiation Therapy, Rebecca Marie Seibert

Doctoral Dissertations

This dissertation concentrates on the introduction of Predictive Adaptive Radiation Therapy (PART) as a potential method to improve cancer treatment. PART is a novel technique that utilizes volumetric image-guided radiation therapy treatment (IGRT) data to actively predict the tumor response to therapy and estimate clinical outcomes during the course of treatment. To implement PART, a patient database containing IGRT image data for 40 lesions obtained from patients who were imaged and treated with helical tomotherapy was constructed. The data was then modeled using locally weighted regression. This model predicts future tumor volumes and masses and the associated confidence intervals based …

Evaluation Of Tagging Techniques Gamma-Decay Probabilities Using The Surrogate Method, Timothy Lee Reed

Masters Theses

A detailed analysis of the statistical and discrete [gamma]-decay tagging techniques was conducted using the absolute surrogate and surrogate ratio method (SRM) to obtain the 92Mo(n,[gamma]) cross section in an equivalent neutron energy range of 80 to 880 keV. Excited 93Mo and 95Mo nuclei were populated using (d,p) reactions on 92Mo and 94Mo targets, respectively. The absolute surrogate 92Mo(n,[gamma]) cross sections disagreed with evaluated neutron capture cross section data by as much as a factor of 4 using the statistical tagging approach, whereas the discrete [gamma]-decay tag absolute surrogate cross section disagreed with the evaluated neutron capture cross section by …

Assessment Of Passive Fire Protection On Steel-Girder Bridges, Michael Davidson

Masters Theses & Specialist Projects

Bridges in the US are severely damaged or suffer collapse from fires at significant rates, even when compared to other hazards such as earthquakes. Fire-induced bridge collapses are perpetuated by the general lack of installed fire protection systems. Therefore, new materials and applications are needed to mitigate structural damage that can be caused to civil infrastructure by severe fires. Accordingly, the objective of this study is to further the development of new fire protection applications in transportation structures. Specifically, the investigation centers on the development of new applications in passive fire protection materials, within the context of shielding steel-girder bridges …

Plasmonic And Photonic Designs For Light Trapping In Thin Film Solar Cells, Liming Ji

Graduate Theses and Dissertations

Thin film solar cells are promising to realize cheap solar energy. Compared to conventional wafer cells, they can reduce the use of semiconductor material by 90%. The efficiency of thin film solar cells, however, is limited due to insufficient light absorption. Sufficient light absorption at the bandgap of semiconductor requires a light path more than 10x the thickness of the semiconductor. Advanced designs for light trapping are necessary for solar cells to absorb sufficient light within a limited volume of semiconductor. The goal is to convert the incident light into a trapped mode in the semiconductor layer.

In this dissertation, …

Validation Of Weak Form Thermal Analysis Algorithms Supporting Thermal Signature Generation, Elton Lewis Freeman

Masters Theses

Extremization of a weak form for the continuum energy conservation principle differential equation naturally implements fluid convection and radiation as flux Robin boundary conditions associated with unsteady heat transfer. Combining a spatial semi-discretization via finite element trial space basis functions with time-accurate integration generates a totally node-based algebraic statement for computing. Closure for gray body radiation is a newly derived node-based radiosity formulation generating piecewise discontinuous solutions, while that for natural-forced-mixed convection heat transfer is extracted from the literature. Algorithm performance, mathematically predicted by asymptotic convergence theory, is subsequently validated with data obtained in 24 hour diurnal field experiments for …

Pulse Sharpening Effects Of Thin Film Ferroelectric Transmission Lines, Robert J. Sleezer

Graduate Theses and Dissertations

Advances in material science have resulted in the development of electrically nonlinear high dielectric thin film ferroelectrics, which have led to new opportunities for the creation of novel devices. This dissertation investigated one such device: a low voltage nonlinear transmission line (NLTL). A finite element simulation of ferroelectric transmission lines showed that NLTLs are capable of creating shockwaves. Additionally, if the losses are kept sufficiently low, it was shown that voltage gain should be possible. Furthermore, a method of accounting for material dispersion was developed. Results from simulations including material dispersion showed that temporal solitons might be possible from a …

Novel Production Techniques Of Radioisotopes Using Electron Accelerators, Daniel Robert Lowe

UNLV Theses, Dissertations, Professional Papers, and Capstones

Non-traditional radioisotope production techniques using a compact, high power linear electron accelerator have been demonstrated and characterized for the production of 18F, 47Sc, 147Pm, and 99mTc from a variety of target candidates. These isotopes are used extensively in the medical field as diagnostic and therapy radioisotopes, as well as the space industry as RTG's. Primary focus was placed on 99mTc as it constitutes approximately 80% of all diagnostic procedures in the medical community that use radioactive tracers. It was also the prime focus due to recent events at the Chalk River nuclear reactor, which caused global shortages of this isotope …

Hybrid Plasmonic Nanoantennas: Fabrication, Characterization, And Application, Shengjie Zhai

UNLV Theses, Dissertations, Professional Papers, and Capstones

As optical counterpart of microwave antennas, plasmonic nanoantennas are important nanoscale devices for converting propagating optical radiation into confined/enhanced electromagnetic fields. Presently, nanoantennas, with a typical size of 200-500 nm, have found their applications in bio-sensing, bio-imaging, energy harvesting, and disease cure and prevention. With the device feature size of next generation IC goes down to 22 nm or smaller, and biological/chemical sensing reaches the Gene’s level, the sizes of the corresponding nanoantennas have to be scaled down to sub-100nm level. In the literature, these sub-100nm nanoantennas are referred as deep subwavelength nanoantennas as size of such miniaturized nanoantennas is …

Nanoroughened Surfaces For Efficient Capture Of Circulating Tumor Cells Without Using Capture Antibodies, Weiqiang Chen, Shinuo Weng, Feng Zhang, Steven Allen, Xiang Li, Liwei Bao, Raymond H. W. Lam, Jill A. Macoska, Sofia D. Merajver, Jianping Fu

Weiqiang Chen

Circulating tumor cells (CTCs) detached from both primary and metastatic lesions represent a potential alternative to invasive biopsies as a source of tumor tissue for the detection, characterization and monitoring of cancers. Here we report a simple yet effective strategy for capturing CTCs without using capture antibodies. Our method uniquely utilized the differential adhesion preference of cancer cells to nanorough surfaces when compared to normal blood cells and thus did not depend on their physical size or surface protein expression, a significant advantage as compared to other existing CTC capture techniques.

P3ht:Pcpdtbt:Pcbm Multi- Polymer Single Layer Solar Cells, Ted Andreas

Physics

OPV efficiencies are limited by their narrow absorption; rather than using tandem architecture to overcome this obstacle, our group combined P3HT and PCPDTBT into a single layer BHJ solar cell that achieved 2.0% PCE. This is 33% higher than the pure P3HT control from this group, proving that multi-polymer solar cells have the potential to outperform their single-polymer components.

Modeling And Simulation Of Pressure Waves Generated By Nano-Thermite Reactions, Karen S. Martirosyan, Maxim Zyskin, Charles M. Jenkins, Yasuyuki Horie

Physics and Astronomy Faculty Publications and Presentations

This paper reports the modeling of pressure waves from the explosive reaction of nano-thermites consisting of mixtures of nanosized aluminum and oxidizer granules. Such nanostructured thermites have higher energy density (up to 26 kJ/cm3) and can generate a transient pressure pulse four times larger than that from trinitrotoluene (TNT) based on volume equivalence. A plausible explanation for the high pressure generation is that the reaction times are much shorter than the time for a shock wave to propagate away from the reagents region so that all the reaction energy is dumped into the gaseous products almost instantaneously and thereby a …

Negative Index Metamaterials Based On Metal-Dielectric Nanocomposites For Imaging Applications, L. Menon, W. T. Lu, A. L. Friedman, S. P. Bennett, D. Heiman, S. Sridhar

Srinivas Sridhar

Negative index metamaterials are demonstrated based on metal-dielectric nanocomposites prepared using a versatile bottom-up nanofabrication approach. The method involves the incorporation of vertically aligned metal nanowires such as Au and Ag inside dielectric aluminum oxide nanotemplates. Optical absorbance measurements show resonance peaks corresponding to the transverse and longitudinal surface plasmon modes. A quantitative model based on effective medium theory is in excellent agreement with experimental data, and points to specific composite configurations and wavelength regimes where such structures can have applications as negative refraction media for imaging.

Possible Room-Temperature Ferromagnetism In Hydrogenated Carbon Nanotubes, Adam L. Friedman, Hyunkyung Chun, Yung Joon Jung, Don Heiman, Evan R. Glaser, Latika Menon

Yung Joon Jung

We find that ferromagnetism can be induced in carbon nanotubes (CNTs) by introducing hydrogen. Multiwalled CNTs grown inside porous alumina templates contain a large density of defects resulting in significant hydrogen uptake when annealed at high temperatures. This hydrogen incorporation produces H-complex and adatom magnetism which generates a sizable ferromagnetic moment and a Curie temperature near TC=1000  K. We studied the conditions for the incorporation of hydrogen, the temperature-dependent magnetic behavior, and the dependence of the ferromagnetism on the size of the nanotubes.

Possible Room-Temperature Ferromagnetism In Hydrogenated Carbon Nanotubes, Adam L. Friedman, Hyunkyung Chun, Yung Joon Jung, Don Heiman, Evan R. Glaser, Latika Menon

Donald Heiman

We find that ferromagnetism can be induced in carbon nanotubes (CNTs) by introducing hydrogen. Multiwalled CNTs grown inside porous alumina templates contain a large density of defects resulting in significant hydrogen uptake when annealed at high temperatures. This hydrogen incorporation produces H-complex and adatom magnetism which generates a sizable ferromagnetic moment and a Curie temperature near TC=1000  K. We studied the conditions for the incorporation of hydrogen, the temperature-dependent magnetic behavior, and the dependence of the ferromagnetism on the size of the nanotubes.

Negative Index Metamaterials Based On Metal-Dielectric Nanocomposites For Imaging Applications, L. Menon, W. T. Lu, A. L. Friedman, S. P. Bennett, D. Heiman, S. Sridhar

Donald Heiman

Negative index metamaterials are demonstrated based on metal-dielectric nanocomposites prepared using a versatile bottom-up nanofabrication approach. The method involves the incorporation of vertically aligned metal nanowires such as Au and Ag inside dielectric aluminum oxide nanotemplates. Optical absorbance measurements show resonance peaks corresponding to the transverse and longitudinal surface plasmon modes. A quantitative model based on effective medium theory is in excellent agreement with experimental data, and points to specific composite configurations and wavelength regimes where such structures can have applications as negative refraction media for imaging.

Negative Index Metamaterials Based On Metal-Dielectric Nanocomposites For Imaging Applications, L. Menon, W. T. Lu, A. L. Friedman, S. P. Bennett, D. Heiman, S. Sridhar

Latika Menon

Negative index metamaterials are demonstrated based on metal-dielectric nanocomposites prepared using a versatile bottom-up nanofabrication approach. The method involves the incorporation of vertically aligned metal nanowires such as Au and Ag inside dielectric aluminum oxide nanotemplates. Optical absorbance measurements show resonance peaks corresponding to the transverse and longitudinal surface plasmon modes. A quantitative model based on effective medium theory is in excellent agreement with experimental data, and points to specific composite configurations and wavelength regimes where such structures can have applications as negative refraction media for imaging.

Super-Resolution Imaging Using A Three-Dimensional Metamaterials Nanolens, B. D. F. Casse, W. T. Lu, Y. J. Huang, E. Gultepe, L. Menon, S. Sridhar

Latika Menon

Super-resolution imaging beyond Abbe's diffraction limit can be achieved by utilizing an optical medium or "metamaterial" that can either amplify or transport the decaying near-field evanescent waves that carry subwavelength features of objects. Earlier approaches at optical frequencies mostly utilized the amplification of evanescent waves in thin metallic films or metal-dielectric multilayers, but were restricted to very small thicknesses (⪡λ, wavelength) and accordingly short object-image distances, due to losses in the material. Here, we present an experimental demonstration of super-resolution imaging by a low-loss three-dimensional metamaterial nanolens consisting of aligned gold nanowires embedded in a porous alumina matrix. This composite …

Analysis Of Stacked Linear Transformer Drivers For Application In Nuclear Fusion Propulsion, Patrick Giddens

Von Braun Symposium Student Posters

No abstract provided.

Development Of Tungsten Based Ceramic-Metallic Nuclear Fuel Containing Uranium Oxide For Nuclear Cryogenic Propulsion Stage Project, Jaewon Choi

Von Braun Symposium Student Posters

No abstract provided.

Development Of A Lightweight, Monolithic, Aspheric Mirror Utlizing Fdm Technology, Josiah Thomas

Von Braun Symposium Student Posters

No abstract provided.

Strain Rate And Orientation Dependencies Of The Strength Of Single Crystalline Copper Under Compression, Virginie Dupont, Timothy C. Germann

Aerospace Engineering - Daytona Beach

Molecular dynamics (MD) simulations are used to model the compression under uniaxial strain of copper single crystals of different orientations at various temperatures and strain rates. Uniaxial strain is used because of the close resemblance of the resulting stress state with the one behind a shock front, while allowing a control of parameters such as strain rate and temperature to better understand the behavior under complex dynamic shock conditions. Our simulations show that for most orientations, the yield strength of the sample is increased with increasing strain rate. This yield strength is also dependent on the orientation of the sample, …

Modeling Martian Planetary Entry Descent And Landing Using Monte Carlo Driven Response Surface Methodology, Narcrisha S. Norman

Mechanical & Aerospace Engineering Theses & Dissertations

Response surface methodology (RSM) is a statistical method that explores the relationships between several descriptive variables and one or more response variables. For over sixty years, among other areas, it has been utilized in quality engineering, process engineering, aircraft engineering, economics, chemical engineering, automotive engineering and design/technique optimization. In this dissertation, RSM is utilized to produce regression models that represent the planetary entry, descent and landing (EDL) process. A complete understanding of EDL process is an essential component of any planetary exploration. Research in this area is ongoing and confidence in the ability to explore known celestial bodies is growing. …

Study Of Morphological Changes In Mgh2 Destabilized Libh4 Systems Using Computed X-Ray Microtomography, Tabbetha A. Dobbins, Shathabish Narasegowda, Leslie G. Butler

Faculty Scholarship for the College of Science & Mathematics

The objective of this study was to apply three-dimensional x-ray microtomographic imaging to understanding morphologies in the diphasic destabilized hydride system: MgH2 and LiBH4. Each of the single phase hydrides as well as two-phase mixtures at LiBH4:MgH2 ratios of 1:3, 1:1, and 2:1 were prepared by high energy ball milling for 5 minutes (with and without 4 mol % TiCl3 catalyst additions). Samples were imaged using computed microtomography in order to (i) establish measurement conditions leading to maximum absorption contrast between the two phases and (ii) determine interfacial volume. The optimal energy for measurement was determined to be 15 keV …

Degenerate Parallel Conducting Layer And Conductivity Type Conversion Observed From P-Ge1 - YSnY (Y = 0.06%) Grown On N-Si Substrate, Mee-Yi Ryu, Yung Kee Yeo, M. Ahoujja, Thomas R. Harris, Richard T. Beeler, John Kouvetakis

Faculty Publications

Electrical properties of p-Ge_1−ySn_y (y = 0.06%) grown on n-Si substrate were investigated through temperature-dependent Hall-effect measurements. It was found that there exists a degenerate parallel conducting layer in Ge_1−ySn_y/Si and a second, deeper acceptor in addition to a shallow acceptor. This parallel conducting layer dominates the electrical properties of the Ge_1−ySn_y layer below 50 K and also significantly affects those properties at higher temperatures. Additionally, a conductivity type conversion from p to n was observed around 370 K for this sample. A two-layer conducting model was used …

Serpentine Low Loss Trapezoidal Silica Waveguides On Silicon, Xiaomin Zhang, Mark Harrison, Audrey Harker, Andrea M. Armani

Engineering Faculty Articles and Research

We report the fabrication and characterization of straight and serpentine low loss trapezoidal silica waveguides integrated on a silicon substrate. The waveguide channel was defined using a dual photo-lithography and buffered HF etching and isolated from the silicon substrate using an isotropic silicon etchant. The waveguide is air-clad and thus has a core-cladding effective index contrast of approximately 25%. Measured at 658, 980 and 1550nm, the propagation loss was found to be 0.69, 0.59, and 0.41dB/cm respectively, with a critical bending radius less than 375μm. The waveguide’s polarization behavior was investigated both theoretically and experimentally. Additionally, the output power shows …

Progress On: “Coherent Terahertz Acoustic Phonon Scattering: Novel Diagnostic For Erosion In Plasma Thruster Discharge Chamber Walls", Thomas E. Wilson, Iain D. Boyd

Physics Faculty Research

The study is based on the success in obtaining the first experimental evidence for the direct excitation of coherent nanosecond-pulsed high-frequency acoustic phonons in semiconducting doping superstructures by electromagnetic fields of the same frequency. Acoustic phonons are detected by a superconducting bolometer, with nanosecond resolution, at the appropriate time-of-flight across a (100) silicon substrate for ballistic longitudinal phonons when a silicon delta-doped doping superlattice is illuminated with grating-coupled nanosecond-pulsed 246-GHz laser radiation with an approximate power density of 1 kW/mm². The absorbed phonon power density in the bolometer detector is estimated to be 10 μW/mm², in …

Hordó Kollektor 3.0, Pal R. Molnar

Pal R. Molnar

Napjainkban egyre többen telepítenek napkollektorokat, a használati melegvíz ellátására, illetve fűtés rásegítésre. Ezen kollektorok hatásfoka széles határok között váltakozik.