Open Access. Powered by Scholars. Published by Universities.®
- Discipline
- Publication Year
Articles 1 - 30 of 43
Full-Text Articles in Physics
Modelling Hoe Performance With An Extended Source; Experimental Investigation Using Misaligned Point Sources, Jorge Lasarte, Kevin Murphy, Izabela Naydenova, Maria Victoria Collados, Jesús Atencia, Suzanne Martin
Modelling Hoe Performance With An Extended Source; Experimental Investigation Using Misaligned Point Sources, Jorge Lasarte, Kevin Murphy, Izabela Naydenova, Maria Victoria Collados, Jesús Atencia, Suzanne Martin
Articles
Holographic optical elements (HOEs) have the potential to enable more compact, versatile, and lightweight optical designs, but many challenges remain. Volume HOEs have the advantage of high diffraction efficiency, but they present both chromatic selectivity and chromatic dispersion, which impact their use with wide spectrum light sources. Single-color light emitting diode (LED) sources have a narrow spectrum that reduces these issues and this makes them better suited for use with volume HOEs. However, the LED source size must be taken into consideration for compact volume HOE-LED systems. To investigate the design limits for compact HOE-LED systems, a theoretical and experimental …
Development Of An Optical Test Bed For The Fabrication And Characterisation Of An Analog Holographic Wavefront Sensor, Emma Branigan, Andreas Zepp, Suzanne Martin, Matthew Sheehan, Szymon Gladysz, Kevin Murphy
Development Of An Optical Test Bed For The Fabrication And Characterisation Of An Analog Holographic Wavefront Sensor, Emma Branigan, Andreas Zepp, Suzanne Martin, Matthew Sheehan, Szymon Gladysz, Kevin Murphy
Conference Papers
A new holographic recording setup has been developed for the fabrication of single- and multi-mode photopolymer-based analog holographic wavefront sensors. A second setup has been built and used to characterise the sensor at several wavelengths.
Optical Characterisation Of Holographic Diffusers And Bangerter Foils For Treatment Of Amblyopia, Matthew Hellis, Suzanne Martin, Matthew Sheehan, Kevin Murphy
Optical Characterisation Of Holographic Diffusers And Bangerter Foils For Treatment Of Amblyopia, Matthew Hellis, Suzanne Martin, Matthew Sheehan, Kevin Murphy
Articles
Amblyopia is a significant issue for children worldwide, and current treatment methods have drawbacks that can hinder treatment effectiveness and/or patient experience. This study proposes a new treatment method using holographic diffusers while also comparing their optical characteristics to a current treatment method (Bangerter foils). Holographic diffusers were developed by optically patterning thin polymer layers on a micron scale. Two compositions of photopolymer (acrylamide and diacetone acrylamide based) are analysed herein. Characterisation shows that holographic diffusers of either composition can achieve a wide range of on-axis intensity reductions, allowing for precise and customisable treatment levels by altering recording exposure time …
Modelling Hoe Performance With An Extended Source; Experimental Investigation Using Misaligned Point Sources, Jorge Lasarte, Kevin Murphy, Izabela Naydenova, Jesús Atencia, Mª Victoria Collados, Suzanne Martin
Modelling Hoe Performance With An Extended Source; Experimental Investigation Using Misaligned Point Sources, Jorge Lasarte, Kevin Murphy, Izabela Naydenova, Jesús Atencia, Mª Victoria Collados, Suzanne Martin
Conference Papers
Holographic Optical Elements (HOEs) have the potential to enable more compact, versatile and lightweight optical designs, but many challenges remain. Volume HOE’s have the advantage of high diffraction efficiency but they present both chromatic selectivity and chromatic dispersion which impact on their use with wide spectrum light sources. Single-colour LED sources have a narrow spectrum that reduces these issues and this makes them better suited for use with volume HOEs. However, the LED source size must be taken into consideration for compact volume HOE-LED systems. To investigate the design limits for compact HOE-LED systems, a theoretical and experimental study was …
Metasurfaces For Holography, Scott Howell
Metasurfaces For Holography, Scott Howell
Physics Capstone Projects
Holography uses the interference of light waves to store information about an object, which can then be seen from different angles to create a partial 3D view. A simple experiment can be done using a laser diode, photographic plate, and a set of dice to create a holographic image. The holographic film is thin and can only hold a single image. Reflection holography can create a 3D diffraction pattern and allows more information to be packed into a single medium. Computer generated holograms can be designed to create holograms without a real object to be used in augmented reality. High …
Analog Holographic Wavefront Sensor For Defocus And Spherical Aberration Measurement Recorded In A Photopolymer, Emma Branigan, Suzanne Martin, Matthew Sheehan, Kevin Murphy
Analog Holographic Wavefront Sensor For Defocus And Spherical Aberration Measurement Recorded In A Photopolymer, Emma Branigan, Suzanne Martin, Matthew Sheehan, Kevin Murphy
Articles
An analog holographic wavefront sensor (AHWFS), for measurement of low and high order (defocus and spherical aberration) aberration modes has been developed as volume phase holograms in a photopolymer recording medium. This is the first time that high order aberrations such as spherical aberration can be sensed using a volume hologram in a photosensitive medium. Both defocus and spherical aberration were recorded in a multi-mode version of this AHWFS. Refractive elements were used to generate a maximum and minimum phase delay of each aberration which were multiplexed as a set of volume phase holograms in an acrylamide based-photopolymer layer. The …
Fabrication And Characterisation Of Large Area, Uniform And Controllable Surface Relief Patterns In Photopolymer Material, Owen Kearney, Izabela Naydenova
Fabrication And Characterisation Of Large Area, Uniform And Controllable Surface Relief Patterns In Photopolymer Material, Owen Kearney, Izabela Naydenova
Conference Papers
As the risk of antibiotic resistant pathogens increases, development of convenient point of care devices is essential. Such devices would help avoid infection – ensure cleanliness of environments and assist in bacteria analysis. The ultimate aim of the research presented here is to develop a compact, cost effective, easy to use optical device which is capable of detecting and quantifying bacteria in an aqueous sample. The surface relief patterns have a dual role, they provide a diffracted light signal, and control the adhesion of the bacteria to the surface. The strength of the diffracted signal is expected to provide a …
Color-Changing Reflection Hologram For Quality Assurance Of Therapeutic Ultrasound Systems, Tatsiana Mikulchyk, John Walsh, Jacinta Browne, Izabela Naydenova, Dervil Cody
Color-Changing Reflection Hologram For Quality Assurance Of Therapeutic Ultrasound Systems, Tatsiana Mikulchyk, John Walsh, Jacinta Browne, Izabela Naydenova, Dervil Cody
Articles
The acoustic output of clinical therapeutic ultrasound equipment requires regular quality assurance (QA) testing to ensure the safety and efficacy of the treatment and that any potentially harmful deviations from the expected output power density are detected as soon as possible. A hologram, consisting of a reflection grating fabricated in an acrylate photopolymer film, has been developed to produce an immediate, visible, and permanent change in the color of the reconstructed hologram from red to green in response to incident ultrasound energy. The influence of the therapeutic ultrasound insonation parameters (exposure time, ultrasound power density, and proximity to the point …
Design And Fabrication Of Volume Holographic Optical Couplers For A Range Of Non-Normal Incidence Angles, Dipanjan Chakraborty, Rosen Georgiev, Sinead Aspell, Izabela Naydenova, Suzanne Martin
Design And Fabrication Of Volume Holographic Optical Couplers For A Range Of Non-Normal Incidence Angles, Dipanjan Chakraborty, Rosen Georgiev, Sinead Aspell, Izabela Naydenova, Suzanne Martin
Conference Papers
A theoretical model has previously been developed to calculate the holographic recording beam angles required in air (at any recording wavelength) to produce a Volume Holographic Optical Element (VHOE) for operation as a coupler for different input and output angles. In this paper, the experimental study is extended to further validate the VHOE coupler design and fabrication approach for additional incident beam angles, comparing -40° -45° and -50° (in air). The output angle for each VHOE is +45° within the medium and the coupler operational wavelength is 633nm. Holographic recording in Bayfol HX 200 photopolymer at 532nm is used to …
Modelling Spherical Aberration Detection In An Analog Holographic Wavefront Sensor, Emma Branigan, Suzanne Martin, Matthew Sheehan, Kevin Murphy
Modelling Spherical Aberration Detection In An Analog Holographic Wavefront Sensor, Emma Branigan, Suzanne Martin, Matthew Sheehan, Kevin Murphy
Conference Papers
The analog holographic wavefront sensor (AHWFS) is a simple and robust solution to wavefront sensing in turbulent environments. Here, the ability of a photopolymer based AHWFS to detect refractively generated spherical aberration is modelled and verified.
Direct Multiplexing Of Low Order Aberration Modes In A Photopolymerbased Holographic Element For Analog Holographic Wavefront Sensing, Emma Branigan, Suzanne Martin, Matthew Sheehan, Kevin Murphy
Direct Multiplexing Of Low Order Aberration Modes In A Photopolymerbased Holographic Element For Analog Holographic Wavefront Sensing, Emma Branigan, Suzanne Martin, Matthew Sheehan, Kevin Murphy
Conference Papers
The fabrication of an analog holographic wavefront sensor, capable of detecting the low order defocus aberration, was achieved in an acrylamide-based photopolymer. While other implementations of holographic wavefront sensors have been carried out digitally, this process utilises a recording setup consisting only of conventional refractive elements so the cost and complexity of holographic optical element (HOE) production could be much reduced. A pair of diffraction spots, corresponding to a maximum and minimum amount of defocus, were spatially separated in the detector plane by multiplexing two HOEs with different carrier spatial frequencies. For each wavefront with a known aberration that was …
Holographic Security, Vincent Toal
Holographic Security, Vincent Toal
Books/Book Chapters
This chapter is concerned with the security applications of holographic techniques. Holograms are used in product authentication, product branding and brand protection, and personal and other documents. Serialization to ensure the uniqueness of each hologram for added security is briefly discussed. The theory of optical character recognition and joint transform correlation methods is outlined. Holographic recording using encrypted reference waves enables secure storage of information. Several methods are considered for encrypting optical data as well as holographic recording of encrypted images and their reconstruction and decryption. Millimeter and microwave holographic imaging techniques for the detection of hidden contraband, narcotics, firearms, …
Optimisation Of The Performance Of Holographic Beam-Shaping Diffractive Diffusers Through Refinement Of The Recording Process, Cara Jones, Suzanne Martin, Sanjay Keshri, Dervil Cody, Kevin Murphy
Optimisation Of The Performance Of Holographic Beam-Shaping Diffractive Diffusers Through Refinement Of The Recording Process, Cara Jones, Suzanne Martin, Sanjay Keshri, Dervil Cody, Kevin Murphy
Conference Papers
Optical diffusers have uses in laser applications and machine vision. Typical fabrication at a commercial level requires master production and the stamping/copying of individual elements at scale. This expensive, indirect process inhibits custom diffusers at reasonable cost. Previously the authors published a novel, direct, single beam method of recording customizable and controllable volume holographic diffusers by manipulating laser speckle and recording the pattern in photopolymer. This method allows for beam-shaping to produce diffusion patterns of various sizes and shapes. In this work, the direct method of recording controllable holographic diffusers is refined to improve diffuser performance (i.e., a decrease in …
Development Of Photopolymer Material With Improved Dynamic Range And Sensitivity, Brian Rogers, Izabela Naydenova, Suzanne Martin
Development Of Photopolymer Material With Improved Dynamic Range And Sensitivity, Brian Rogers, Izabela Naydenova, Suzanne Martin
Conference Papers
In this study the effect of the concentration of acrylamide and the influence of different initiators in a photopolymer composition for holographic recording of diffraction gratings is investigated. Light manipulating Holographic Optical Elements (HOEs) have a number of characteristics which can be optimised for different roles. However, at the core of these devices is the refractive index modulation that has been created in the material during recording. Typically higher refractive index modulation will enable greater diffraction efficiency. Solar concentrating HOEs can particularly benefit from material that experiences higher refractive index modulation. For a solar concentrator to have a high acceptance …
Study Of The Effect Of Magnetic Nanoparticles On The Hologram Recording Capability Of Photopolymer Nanocomposite For Development Of Holographic Sensor/Actuator, Muhammad Irfan, Suzanne Martin, Izabela Naydenova
Study Of The Effect Of Magnetic Nanoparticles On The Hologram Recording Capability Of Photopolymer Nanocomposite For Development Of Holographic Sensor/Actuator, Muhammad Irfan, Suzanne Martin, Izabela Naydenova
Conference Papers
Photopolymer nanocomposite materials utilising nanoparticles of varied refractive index are one of the most attractive materials for holography due to their tuneable properties. The preparation of the photopolymer nanocomposites can involve mixing a stable colloidal suspension in the photopolymer solution or printing of the nanoparticle colloidal suspension on top of a dried photopolymer layer. By following the first approach in this study a novel photopolymer nanocomposite material is prepared for holographic recording. It consists of N-isopropylacrylamide (NIPA)-based photopolymer as a host and iron oxide magnetic nanoparticles as nanodopant. The methodology of the photopolymer nanocomposite material preparation is explained in detail. …
Serialised Holography For Brand Protection And Authentication, Dinesh Vather, Izabela Naydenova, Dervil Cody, Monika Zawadzka, Suzanne Martin, Emilia Mihaylova, Stephen Curran, Paul Duffy, Josune Portillo, Daniel Connell, Stephen Mcdonnell, Vincent Toal
Serialised Holography For Brand Protection And Authentication, Dinesh Vather, Izabela Naydenova, Dervil Cody, Monika Zawadzka, Suzanne Martin, Emilia Mihaylova, Stephen Curran, Paul Duffy, Josune Portillo, Daniel Connell, Stephen Mcdonnell, Vincent Toal
Articles
The problems presented by counterfeit products and documentation are discussed. Limitations of existing holograms for anti-counterfeit applications are described. We describe the advantages of full holographic serialisation and the requirements in terms of materials and techniques for mass production of true serialised holograms. These requirements having been met, we report for the first time the mass production of fully serialised holograms. The novelty of approach consists of the direct use of product manufacturer’s information as the object in a holographic recording system along with a self-processing photopolymer and modular optical system to facilitate mass production of truly serialised volume holograms. …
Holographic Beam-Shaping Diffractive Diffusers Fabricated By Using Controlled Laser Speckle, Kevin Murphy, Vincent Toal, Izabela Naydenova, Suzanne Martin
Holographic Beam-Shaping Diffractive Diffusers Fabricated By Using Controlled Laser Speckle, Kevin Murphy, Vincent Toal, Izabela Naydenova, Suzanne Martin
Articles
A method for fabricating diffractive holographic optical diffusers is reported, allowing a high degree of control of the resulting diffuser characteristics. The method consists of recording a laser speckle pattern using a single carrier beam, with controlled speckle size and shape, in an acrylamide-based volume photopolymer. The multiple interferences that create the speckle pattern form the hologram. Results are presented verifying the diffusers are volume holographic in nature and the speckle pattern is recorded accurately in the photopolymer. Diffusers recorded by this method are analysed to characterise the optical performance of the diffusers and to illustrate their beam-shaping capabilities, particularly …
N-Isopropylacrylamide-Based Photopolymer For Holographic Recording Of Thermosensitive Transmission And Reflection Grating, Tatsiana Mikulchyk, Suzanne Martin, Izabela Naydenova
N-Isopropylacrylamide-Based Photopolymer For Holographic Recording Of Thermosensitive Transmission And Reflection Grating, Tatsiana Mikulchyk, Suzanne Martin, Izabela Naydenova
Articles
In recent years, functionalized photopolymer systems capable of holographic recording are in great demand due to their potential use in the development of holographic sensors. This work presents a newly developed Nisopropylacrylamide(NIPA)-based photopolymer for holographic recording in reflection and transmission modes. The optimized composition of the material is found to reach refractive index modulation of up to 5 10-3 and 1.6 10-3 after recording in transmission and reflection mode, respectively. In addition to fulfilling the requirements for holographic recording materials, the NIPA-based photopolymer is sensitive to temperature and has lower toxicity than acrylamide-based photopolymers. Possible application of the …
Effect Of Monomer Diffusion On Photoinduced Shrinkage In Photopolymer Layers Determined By Electronic Speckle Pattern Interferometry, Mohesh Moothanchery, Manojit Pramanik, Vincent Toal, Izabela Naydenova
Effect Of Monomer Diffusion On Photoinduced Shrinkage In Photopolymer Layers Determined By Electronic Speckle Pattern Interferometry, Mohesh Moothanchery, Manojit Pramanik, Vincent Toal, Izabela Naydenova
Conference Papers
The aim of this study is to determine the effect of monomer diffusion on the photoinduced shrinkage profile in acrylamide based photopolymer layers during holographic recording. Using phase shifting electronic speckle pattern interferometry the displacement at each pixel in the image of the layer is measured. The complete displacement profile of the layer was obtained using phase shifting technique. We observed a reduction in shrinkage as a result of monomer diffusion from unexposed regions of holographic exposure. As a result of diffusion the maximum shrinkage was reduced by 26 % from 7.18μm to 5.28μm in a photopolymer layer of thickness160 …
Quantitative Measurement Of Displacement In Photopolymer Layers During Holographic Recording Using Phase Shifting Electronic Speckle Pattern Interferometry, Mohesh Moothanchery, Viswanath Bavigadda, Paul Kumar Upputturi, Manojit Pramanik, Vincent Toal, Izabela Naydenova
Quantitative Measurement Of Displacement In Photopolymer Layers During Holographic Recording Using Phase Shifting Electronic Speckle Pattern Interferometry, Mohesh Moothanchery, Viswanath Bavigadda, Paul Kumar Upputturi, Manojit Pramanik, Vincent Toal, Izabela Naydenova
Conference Papers
The aim of this study is to determine the displacement profile due to shrinkage in acrylamide-based photopolymer layer during holographic recording. Using phase shifting electronic speckle pattern interferometry the displacement at each pixel in the image of the object is measured by phase shifting technique so that a complete displacement profile of the object can be obtained. It was observed that the displacement profile is Gaussian and resembles to the profile of the recording beam. We observed an increase in shrinkage from 2 μm at 20 seconds of recording to 7.5 μm after 120 seconds of recording. The technique allows …
Diffractive Optical Elements With A Large Angle Of Operation Recorded In Acrylamide Based Photopolymer On Flexible Substrates, Hoda Akbari, Izabela Naydenova, Lina Persechini, Sean Garner, Pat Cimo, Suzanne Martin
Diffractive Optical Elements With A Large Angle Of Operation Recorded In Acrylamide Based Photopolymer On Flexible Substrates, Hoda Akbari, Izabela Naydenova, Lina Persechini, Sean Garner, Pat Cimo, Suzanne Martin
Articles
A holographic device characterised by a large angular range of operation is under development. The aim of this study is to increase the angular working range of the diffractive lens by stacking three layers of high efficiency optical elements on top of each other so that light is collected (and focussed) from a broader range of angles. The angular range of each individual lens element is important, and work has already been done in an acrylamide-based photosensitive polymer to broaden the angular range of individual elements using holographic recording at a low spatial frequency.This paper reports new results on the …
Using Acrylamide Based Photopolymers For Fabrication Of Holographic Optical Elements In Solar Energy Applications, Hoda Akbari, Izabela Naydenova, Suzanne Martin
Using Acrylamide Based Photopolymers For Fabrication Of Holographic Optical Elements In Solar Energy Applications, Hoda Akbari, Izabela Naydenova, Suzanne Martin
Articles
A holographic device is under development that aims to improve light collection in solar cells. The aim is to explore the potential of using photopolymer Holographic Optical Elements (HOE) to collect light from a moving source, such as the sun, and re-direct it for concentration by a holographic lens.. A working range of 45 degrees is targeted for such a device to be useful in solar applications without tracking. A photopolymer HOE is capable of efficiently re-directing light, but the angular selectivity of a single grating is usually of the order of one degree at the thicknesses required for high …
Holographic Sensors: Three-Dimensional Analyte-Sensitive Nanostructures And Their Applications, Ali K. Yetisen, Izabela Naydenova, Fernando Da Cruz Vasconcellos, Jeffrey Blyth, Christopher R. R. Lowe
Holographic Sensors: Three-Dimensional Analyte-Sensitive Nanostructures And Their Applications, Ali K. Yetisen, Izabela Naydenova, Fernando Da Cruz Vasconcellos, Jeffrey Blyth, Christopher R. R. Lowe
Articles
Holographic sensors are analytical devices that systematically diffract narrow-band light in the ultraviolet to near-infrared range for application in the detection and quantification of analytes and/or physical parameters. They can be functionalized with analyte-responsive materials to construct highly sensitive optical sensors for use in testing, where a visual readout, fast turnaround time, and reversibility are needed. Holography allows fabrication of disposable sensors that are lightweight for miniaturization and multiplexing purposes.3 Holographic sensors offer three capabilities on a single analytical device: (i) label-free analyte-responsive polymer, (ii) real-time, reversible quantification of the external stimuli, and (iii) three-dimensional visual image display.
Studies Of Shrinkage In Photopolymerisable Materials For Holographic Applications, Mohesh Moothanchery
Studies Of Shrinkage In Photopolymerisable Materials For Holographic Applications, Mohesh Moothanchery
Doctoral
Holography is now firmly established as a tool for scientific and engineering studies and also as a display medium. Holographic performance mainly depends on the choice of recording wavelengths, recording material, recording conditions and experimental setup as well as environmental conditions in the laboratory. Acrylamide based photopolymer has significant advantages as a holographic recording material such as self-development, low scatter, high diffraction efficiency, ease of preparation and low cost. The main objective of this project is to determine and minimise the shrinkage of an acrylamide based photopolymer developed in the Centre for Industrial and Engineering Optics for holographic recording. This …
Design And Study Of Acrylamide-Based Photopolymer Holographic Optical Elements For Solar Application, Hoda Akbari, Izabela Naydenova, Manus Kennedy, John Doran, Suzanne Martin
Design And Study Of Acrylamide-Based Photopolymer Holographic Optical Elements For Solar Application, Hoda Akbari, Izabela Naydenova, Manus Kennedy, John Doran, Suzanne Martin
Conference Papers
Abstract: Solar concentrators can be used to reduce the cost of photovoltaic electrical power generation by collecting incident solar radiation from a given aperture area and transmitting the energy to a reduced area. In doing so, the overall cost of power (Wp) can be reduced as less area of photovoltaic is required. This paper will discuss Holographic Solar Concentrators fabricated in an acrylamide photopolymer , describing the optical recording process and showing how the fabricated HOE’s can be used in solar concentrator devices. Preliminary lifetime studies are also discussed.
Diacetone Acrylamide-Based Non-Toxic Holographic Photopolymer, Dervil Cody, Izabela Naydenova, Emilia Mihaylova
Diacetone Acrylamide-Based Non-Toxic Holographic Photopolymer, Dervil Cody, Izabela Naydenova, Emilia Mihaylova
Conference Papers
A new low-toxicity diacetone acrylamide-based photopolymer is developed and characterized. The environmentally-compatible photopolymer has been modified with the inclusion of glycerol. The incorporation of glycerol results in a uniform maximum refractive index modulation for recording intensities in the range of 1-20 mW/cm2. This may be attributed to glycerol’s nature as a plasticizer, which allows for faster diffusion of un-reacted monomer within the grating during holographic recording. An optimum recording intensity of 0.5 mW/cm2 is observed for exposure energies of 20-60 mW/cm2. The modified photopolymer achieves a refractive index modulation of 2.2x10-3, with diffraction …
Real Time Shrinkage Studies In Photopolymer Films Using Holographic Interferometry, Mohesh Moothanchery, Izabela Naydenova, Viswanath Bavigadda, Suzanne Martin, Vincent Toal
Real Time Shrinkage Studies In Photopolymer Films Using Holographic Interferometry, Mohesh Moothanchery, Izabela Naydenova, Viswanath Bavigadda, Suzanne Martin, Vincent Toal
Conference Papers
Polymerisation induced shrinkage is one of the main reasons why photopolymer materials are not more widely used for holographic applications. The aim of this study is to evaluate the shrinkage in an acrylamide photopolymer layer during holographic recording using holographic interferometry. Shrinkage in photopolymer layers can be measured by real time capture of holographic interferograms during holographic recording. Interferograms were captured using a CMOS camera at regular intervals. The optical path length change and hence the shrinkage were determined from the captured fringe patterns. It was observed that the photopolymer layer shrinkage is in the order of 3.5%.
New Non-Toxic Holographic Photopolymer Material, Dervil Cody, Izabela Naydenova, Emilia Mihaylova
New Non-Toxic Holographic Photopolymer Material, Dervil Cody, Izabela Naydenova, Emilia Mihaylova
Articles
There is an increasing need for environmentally friendly holographic recording materials which can be produced in bulk with little risk to the health of workers in manufacturing. This is why the development of non-toxic photopolymer materials is crucial, and has attracted attention in recent years. Composition and preliminary characterization of a new non-toxic photopolymer material are presented. It operates well at a range of spatial frequencies, and achieves diffraction efficiencies and refractive index modulation comparable to the known acrylamide-based photopolymers.
Study Of The Shrinkage Caused By Holographic Grating Formation In Acrylamide Based Photopolymer Film, Mohesh Moothanchery, Izabela Naydenova, Vincent Toal
Study Of The Shrinkage Caused By Holographic Grating Formation In Acrylamide Based Photopolymer Film, Mohesh Moothanchery, Izabela Naydenova, Vincent Toal
Articles
We study the shrinkage in acrylamide based photopolymer by measuring the Bragg detuning of transmission diffraction gratings recorded at different slant angles and at different intensities for a range of spatial frequencies. Transmission diffraction gratings of spatial frequencies 500, 1000, 1500 and 2000 lines/mm were recorded in an acrylamide based photopolymer film having 60 ± 5 μm thickness. The grating thickness and the final slant angles were obtained from the angular Bragg selectivity curve and hence the shrinkage caused by holographic recording was calculated. The shrinkage of the material was evaluated for three different recording intensities 1, 5 and 10 …
Optical Properties Of Photopolymer Layers Doped With Aluminophosphate Nanocrystals, Elsa Leite, Tzvetanka Babeva, E Ng, Vincent Toal, Svetlana Mintova, Izabela Naydenova
Optical Properties Of Photopolymer Layers Doped With Aluminophosphate Nanocrystals, Elsa Leite, Tzvetanka Babeva, E Ng, Vincent Toal, Svetlana Mintova, Izabela Naydenova
Articles
The optical properties of photopolymer layers consisting of an acrylamide–based matrix and microporous aluminophosphate nanocrystals of AEI- type are investigated. The compatibility of the photopolymer doped with the nanoparticles is studied. The surface and volume properties of the layers with different levels of doping with microporous nanocrystals are characterized. The effective refractive indices and absorption coefficients of the doped photopolymer layers are determined and used to calculate the refractive index and porosity of pure AEI nanoparticles used as dopants. Volume transmission gratings were recorded in the doped photopolymer layers at different spatial frequencies. By spatial monitoring of the characteristic Raman …