Physics Commons^™

Laser Frequency Stabilization For Lisa, Andrew B. Parker, Andrew J. Sutton, Glenn De Vine

STAR Program Research Presentations

This research focuses on laser ranging developments for LISA (Laser Interferometer Space Antenna), a planned NASA-ESA gravitational wave detector in space. LISA will utilize precision laser interferometry to track the changes in separation between three satellites orbiting 5 million kilometers apart. Specifically, our goal is to investigate options for laser frequency stabilization. Previous research has shown that an optical cavity system can meet LISA's stability requirements, but these units are large and heavy, adding cost to the implementation. A heterodyne Mach-Zehnder interferometer could be integrated onto LISA’s existing optical bench, greatly reducing the weight, provided the interferometer meets the stability …

Environmental Testing Of Lasers For Jpl's Cold Atom Laboratory, Carey L. Baxter

STAR Program Research Presentations

NASA’s Cold Atom Lab (CAL) is a multi-user facility designed to study ultra-cold quantum gases in the microgravity environment of the International Space Station (ISS). One of the main goals of CAL is to explore the unknown territory of extremely low temperatures—possibly as low as the picokelvin range!—where new and fascinating quantum phenomena can be observed. At such temperatures matter stops behaving as particles and instead becomes macroscopic matter waves. CAL will be remotely controlled to perform a multitude of experiments and is scheduled to launch in 2016. In order to anticipate problems that might occur during and post-launch, including …

A Prototype Microwave Cavity Control Circuit For Use In Next Generation Free Electron Laser, Josh Thompson, Peter Neal Barrina, Jiayi Jiang, Joe Frisch, Steve Smith, Daniel Van Winkle

STAR Program Research Presentations

One of the current programs at SLAC National Accelerator Laboratory is the Linac Coherent Light Source, or LCLS. Using the existing hardware of the last third of their linear accelerator (or “linac”), SLAC has created one of the most energetic X-ray free electron lasers (or “FEL”). Since 2009, LCLS has used this FEL to perform a wide range of experiments across all sciences, most notably ultrafast filming at the molecular scale. As requests for beam-time with this laser increases, SLAC is purposing a linac upgrade to better match this demand. This upgrade, named LCLS-II, will replace existing copper radio frequency …

Maximizing Precision Of Variable Star Photometry With Digital Cameras In Suburban Environments, David Hergesheimer

STAR Program Research Presentations

Photometry is the measure of the brightness of an object. When making such measurements on stars, it is done is units of magnitude, which is on a logarithmic scale with a base of ~2.512. Variable star photometry using a commercially available digital camera is not going to be as accurate and precise as equipment used by astronomers, and because of the logarithmic scale of magnitude used, determining how much of an effect different error reduction strategies have is not straightforward, and is best done experimentally.

My research is conducting photometry on variable stars (changing brightness) with a digital camera, and …

Particle Image Velocimetry Of Transverse Jets In Crossflow, Jesse K. Tsai, Kayla Kuzmich, David Forliti, Kriss Vanderhyde, Nils Sedano

STAR Program Research Presentations

The jet in crossflow (JICF) has been an ongoing study for the past several decades with applications in the field of fluid mechanics. This particular flow field produces vortical structures tied to the entrainment and mixing of two separate fluids. Research of the JICF seeks to determine a model and trajectory scaling law for future designs. This will help future designers to optimize the mixing and homogeneity of the two fluids to decrease emissions from pollutants, make ignition easier, and improve combustion efficiency of rockets.

Our experiment will employ Particle Image Velocimetry (PIV) to determine the fluid motion of the …

Tuffoam Density Variation Through Radiography, Sergio Contreras Esquivel

STAR Program Research Presentations

TufFoam is a low density, high impact tolerant polyurethane foam with good high voltage breakdown developed at the Sandia National Laboratories. Identically shaped samples have been produced with various formulations and production conditions. Eight different variables were studied. Our aim is to compare the density variation of the material when produced and processed under distinct conditions. The density of TufFoam is determined using radiographic imaging. We extract the foam density by fitting the radiographic density of each step in a plastic step wedge with 10 steps from 0.1 to 1.0 inches and applying the resulting equation to convert each pixel …

Exploring Soil Moisture Protocol Alternatives For The Classroom Setting, Garrett Smith

STAR Program Research Presentations

Climate change poses a direct threat to future water resources but current climate models suffer from uncertainties regarding the availability of regional water. SMAP or the Soil Moisture Active Passive mission seeks to make improvements to climate models by taking highly accurate, high resolution measurements of global soil moisture. To engage students around the world in a collection of meaningful data that may support the SMAP satellite mission, the Global Learning and Observations to Benefit the Environment program or GLOBE, has forged a partnership with NASA and JPL. GLOBE brings the power of citizen science to the SMAP mission, empowering …

Does A Plastron Improve Heat Transfer?, Madani A. Khan, Jeffrey Alston, Andrew Guenthner

STAR Program Research Presentations

Superamphiphobic surfaces strongly repel both water and oils. In this work, aluminum coupons are processed by sanding with various grit of sand paper to impart microscale roughness. Subsequent submersion of the aluminum substrate in boiling water grows nanoscale grass-like structures. The oxide layer of Al is slightly soluble in water. During a fast diffusion/equilibrium, Al₂O₃ nanograss grows on the surface. A low energy coating is then deposited on the surface. The micro and nanoscale features create re-entrant structures that trap air enabling contact liquid to be in a Cassie-Baxter state. Superamphiphobicity of the samples were confirmed by …

Characterization Of Polarized Synchrotron Light, Britny N. Delp, Jeff Corbett

STAR Program Research Presentations

The Stanford Synchrotron Radiation Light accelerates electrons around a 234-meter circumference ring at relativistic speeds. The x-ray radiation produced by this process is used in many fields of science ranging from materials science to medicine.

This project seeks to measure the polarization of the 532 nanometer wavelength component in the visible light beam emitted from the SPEAR-3 synchrotron as a function of vertical position. The beam was focused through a lens, then passed through a 532 nm band pass filter and a polarizer mounted on a rotating stand. The beam power was measured as a function of vertical position and …

Evolution Of Perturbations In Flow Field Mechanics, Samantha R. Bell, David Forliti, Nils Sedano, Kriss Vanderhyde

STAR Program Research Presentations

This project explores the stability analysis of a given flow field. Specifically, where the peak disturbance occurs in a flow as this is the disturbance that is most likely to occur. In rocket combustion, it is important to understand where the maximum disturbance occurs so that the mixing of fuel can be stabilized. The instabilities are the results of frequencies in the area surrounding the flow field. The linear stability governing equations are employed to better understand the disturbance. The governing equations for continuity and momentum in the x and y directions are used to form an equation for the …

Radiographic Image Quality Enhancement By The Use Of Copper Filters, Timothy T. Sakogawa, Bernice Mills

STAR Program Research Presentations

In x-radiography, filters are often used in order to improve the overall image quality. Filters achieve this by making the x-ray beam have less energy spread, resulting in a cleaner image. Step wedges of different materials were used to compare radiographic density with and without a copper filter to identify the effect of the copper filter at different energies and exposure times. The step wedges used were CRS 1018 (cold rolled steel), Stainless Steel 304L, Al 1100, Al 6061 T6, titanium, copper, PTFE (polytetrafluoroethylene or Teflon), brass, carbon, magnesium, phenolic, tungsten, and tantalum. Out of the 14 step wedges tested, …