Physics Commons^™

Shrinkage Study In Photopolymerisable Hybrid Sol-Gel Through Holographic Patterning, Jamshed Aftab, Izabela Naydenova, Tatsiana Mikulchyk

Articles

Photopolymerisation induced shrinkage of holographic materials is one of the main factors which needs to be considered for designing holographic optical elements (HOEs) with high accuracy in light redirection with maximum efficiency. This work studies the shrinkage in photopolymerisable hybrid sol-gel (PHSG) by examining the properties of volume transmission gratings recorded in PHSG layers. It explores both the dependence of shrinkage on the holographic grating parameters (thickness, spatial frequency, slant angle) and the effect of material aging. By using the fringe-plane rotation model, shrinkage is found to have the maximum value of 1.37 % at 765 lines/mm (19.36° slant angle) …

Physicists As Environmental Experts, Rachel Rothschild

Articles

The question of which scientists are qualified to provide expert guidance in legal controversies is a perennial debate among scholars, judges, and lawyers. Scientists who participate in legal disputes can achieve enormous power and influence, not only over the case at hand but over long-term developments in legal doctrine. While these issues arise in many areas of the law, environmental litigation has been a particularly active site of contestations over epistemic authority. Courts have frequently relied on scientists to understand whether the government is justified in regulating pollution and who may be liable for environmental and public health harms.

This …

Modelling The Formation Of Unslanted Holographic Gratings In Hybrid Photopolymer Media, Jack Lyons, Dana Mackey, Izabela Naydenova

Articles

The theoretical modelling of holographic recording in photopolymers has been an important tool in their optimisation. More complex, hybrid organic/inorganic photopolymers have been developed in pursuit of materials with higher sensitivity, low shrinkage, high dynamic range and environmental stability. Recent attempts to augment the existing models for the redistribution of inorganic nanoparticles in holographic recording were successful but there is still a knowledge gap in regards to modelling optical losses, mutual cross-diffusion, the formation of slanted holographic gratings and polymerization induced shrinkage in hybrid photopolymer media. This paper will describe a novel approach to modelling the formation of unslanted holographic …

Confocal Raman Spectroscopy Coupled With In Vitro Permeation Testing To Study The Effects Of Formalin Fixation On The Skin Barrier Function Of Reconstructed Human Epidermis, Hichem Kichou, Franck Bonnier, Amanda C. Caritá, Hugh Byrne, Igor Choupra, Emilie Munnier

Articles

Confocal Raman Spectroscopy is recognised as a potent tool for molecular characterisation of biological specimens. There is a growing demand for In Vitro Permeation Tests (IVPT) in the pharmaceutical and cosmetic areas, increasingly conducted using Reconstructed Human Epidermis (RHE) skin models. In this study, chemical fixation of RHE in 10% Neutral Buffered Formalin for 24 hours has been examined for storing RHE samples at 4°C for up to 21 days. Confocal Raman Spectroscopy, combined with Principal Components Analysis, revealed the molecular-level effects of fixation, notably in protein and lipid conformation within the stratum corneum and viable epidermis. IVPT by means …

Three-Dimensional Printing Limitations Of Polymers Reinforced With Continuous Stainless Steel Fibres And Curvature Stiffness, Alison J. Clarke, Andrew N. Dickson, Vladimir Milosavljevic, Denis P. Dowling

Articles

This study investigates the printability limitations of 3D-printed continuous 316L stainless steel fibre-reinforced polymer composites obtained using the Materials Extrusion (MEX) technique. The objective was to better understand the geometric printing limitations of composites fabricated using continuous steel fibres, based on a combination of bending stiffness testing and piezoresistive property studies. The 0.5 mm composite filaments used in this study were obtained by co-extruding polylactic acid (PLA), with a 316 L stainless steel fibre (SSF) bundle. The composite printability limitations were evaluated by the printing of a series of ’teardrop’ shaped geometries with angles in the range from 5◦ to …

Comparing Thin And Volume Regimes Of Analog Holograms For Wavefront Sensing, Emma Branigan, Andreas Zepp, Suzanne Martin, Matthew Sheehan, Szymon Gladysz, Kevin Murphy

Articles

Two analog holographic wavefront sensors, for measurement of defocus, have been fabricated as both thin and volume phase transmission holograms in a self-developing photopolymer. This represents the first reported direct comparison of hologram regimes when designed for wavefront sensing. An analysis of the effect of crosstalk in the presence of one other aberration mode (astigmatism X (0/90°), coma X (horizontal), and primary spherical aberration) was carried out with each version of the sensor. The performance of thin and volume analog holographic wavefront sensors was characterized under emulated conditions associated with moderate atmospheric turbulence.

Investigation Of The Uv-Resistance Of Photopolymerisable Glass For Space Applications, Luca Sorridente, Tatsiana Mikulchyk, Izabela Naydenova, Kevin Murphy

Articles

The progress of space based scientific research leads to an increasing demand for more efficient and less bulky instruments. Conventional refractive elements make up a critical part of many optical instruments launched into space; however, they can be bulky and heavy. Holographic optical elements are an efficient alternative to replace the conventional optical elements as they are lightweight and can be miniaturized. Current materials typically used for volume holographic optical elements are not robust enough for use in space environment. Recently a promising photopolymerisable glass has been developed using a sol-gel technique, which can provide dry layers suitable for holographic …

Photopolymer Material Durability And Safety In Holographic Diffusers For Visual Applications, Matthew Hellis, Alan Casey, Edoardo Splendi, Suzanne Martin, Matthew Sheehan, Kevin Murphy

Articles

This study introduces novel holographic diffuser applications employing acrylamide- or diacetone acrylamide-based photopolymers, patterned within the volume on a micron scale by a single-beam holographic recording process. These diffusers have previously been presented as potential treatments for amblyopia and diplopia. This work has now been extended to spectrometric analysis to determine their properties under broadband light. Diffusive elements with higher diffusion efficiencies exhibited a marginal reduction (< 5%) in diffusion efficiency across most of the visible spectrum. Given the intended application of these holographic diffusers, cytotoxicity assessments were also performed. This is significant as there is a difference in toxicity between the crystalline acrylamide (classified as a category 3 material) and diacetone acrylamide (classified as a category 4 material). The findings indicated substantially lower toxicity in holograms produced with diacetone acrylamide-based photopolymer. The accelerated ageing of both formulations of holographic diffusers indicated that the acrylamide-based holographic diffusers did not reduce efficacy in the 292 days of ageing. The diacetone acrylamide-based holographic diffusers exhibited reduced efficacy by day 182. Despite this, both formulations have been shown to perform for prolonged periods as the treatment modality would require. These results emphasise that holographic diffusers exhibit minimal spectral impact, and longevity on the scale of treatment regimes which are crucial considerations for their prospective use case as treatments for amblyopia and diplopia.

Modeling Redistribution Of Nanozeolites In Holographic Recording, Dana Mackey, Jack Lyons Dr, Izabela Naydenova

Articles

Zeolite doped photopolymers have been studied experimentally due to their potential application in the develop- ment of optical sensors. It has been shown that dopant redistribution can be achieved by holographic recording and has a direct influence on the sensitivity of the recorded grating. To achieve better theoretical understanding of these processes, this paper proposes an extended photopolymerization-diffusion mathematical model for describing the dynamics of nanozeolite redistribution during recording in an acrylamide-based photopolymer. Using numerical simulations of this model, we investigate how recording conditions, dopant transport parameters, and initial load affect the refractive index modulation of the resulting photonic structure.

Holographic Multiplexing In A Photopolymerisable Hybrid Sol-Gel, Pamela Stoeva, Tatsiana Mikulchyk, Izabela Naydenova, Kevin Murphy

Articles

Holographic multiplexing techniques enhance functionality and information storage by leveraging the inherent selectivity of holograms. This is crucial for advancing holographic sensors, which excel in simultaneously detecting multiple parameters from a single input signal. This study explores the potential of the recent photopolymerisable hybrid sol-gel (PHSG) material for application in Space sensing systems through the investigation of its holographic angular multiplexing capabilities. For the first time, to the best of our knowledge, we report the successful recording of up to five angularly multiplexed gratings with diffraction efficiencies (DE) ≥ 15% in 187 ± 18 µm PHSG layers. A 3 mW/cm2 …

Spectralomics – Towards A Holistic Adaptation Of Label Free Spectroscopy, Hugh Byrne

Articles

Vibrational spectroscopy, largely based on infrared absorption and Raman scattering techniques, is much vaunted as a label free approach, delivering a high content, holistic characterisation of a sample, with demonstrable applications in a broad range of fields, from process analytical technologies and preclinical drug screening, to disease diagnostics, therapeutics, prognostics and personalised medicine. However, in the analysis of such complex systems, a trend has emerged in which spectral analysis is reduced to the identification of individual peaks, based on reference tables of assignments derived from literature, which are then interpreted as biomarkers. More sophisticated analysis attempts to unmix the spectrum …

Modelling Hoe Performance With An Extended Source; Experimental Investigation Using Misaligned Point Sources, Jorge Lasarte, Kevin Murphy, Izabela Naydenova, Maria Victoria Collados, Jesús Atencia, Suzanne Martin

Articles

Holographic optical elements (HOEs) have the potential to enable more compact, versatile, and lightweight optical designs, but many challenges remain. Volume HOEs have the advantage of high diffraction efficiency, but they present both chromatic selectivity and chromatic dispersion, which impact their use with wide spectrum light sources. Single-color light emitting diode (LED) sources have a narrow spectrum that reduces these issues and this makes them better suited for use with volume HOEs. However, the LED source size must be taken into consideration for compact volume HOE-LED systems. To investigate the design limits for compact HOE-LED systems, a theoretical and experimental …

Disaggregating Longer-Term Trends From Seasonal Variations In Measured Pv System Performance, Chibuisi Chinasaokwu Okorieimoh, Brian Norton, Michael Conlon

Articles

Photovoltaic (PV) systems are widely adopted for renewable energy generation, but their performance is influenced by complex interactions between longer-term trends and seasonal variations. This study aims to remove these factors and provide valuable insights for optimising PV system operation. We employ comprehensive datasets of measured PV system performance over five years, focusing on identifying the distinct contributions of longer-term trends and seasonal effects. To achieve this, we develop a novel analytical framework that combines time series and statistical analytical techniques. By applying this framework to the extensive performance data, we successfully break down the overall PV system output into …

Renormalized Stress-Energy Tensor For Scalar Fields In Hartle-Hawking, Boulware, And Unruh States In The Reissner-Nordström Spacetime, Julio Arrechea, Cormac Breen, Adrian Ottewill, Peter Taylor

Articles

In this paper, we consider a quantum scalar field propagating on the Reissner-Nordström black hole spacetime. We compute the renormalized stress-energy tensor for the field in the Hartle-Hawking, Boulware and Unruh states. When the field is in the Hartle-Hawking state, we renormalize using the recently developed “extended coordinate” prescription. This method, which relies on Euclidean techniques, is very fast and accurate. Once, we have renormalized in the Hartle-Hawking state, we compute the stress-energy tensor in the Boulware and Unruh states by leveraging the fact that the difference between stress-energy tensors in different quantum states is already finite. We consider a …

Raman Spectroscopic Analysis Of Human Serum Samples Of Convalescing Covid-19 Positive Patients, Hugh Byrne, Naomi Jackson, Jaythoon Hassan

Articles

Rapid screening, detection and monitoring of viral infection is of critical importance, as exemplified by the rapid spread of SARS-CoV-2, leading to the worldwide pandemic of COVID-19. This is equally the case for the stages of patient convalescence as for the initial stages of infection, to understand the medium and long terms effects, as well as the efficacy of therapeutic interventions. Optical spectroscopic techniques potentially offer an alternative to currently employed techniques of screening for the presence, or the response to infection. In this study, the ability of Raman spectroscopy to distinguish between samples of the serum of convalescent COVID-19 …

Optical Characterisation Of Holographic Diffusers And Bangerter Foils For Treatment Of Amblyopia, Matthew Hellis, Suzanne Martin, Matthew Sheehan, Kevin Murphy

Articles

Amblyopia is a significant issue for children worldwide, and current treatment methods have drawbacks that can hinder treatment effectiveness and/or patient experience. This study proposes a new treatment method using holographic diffusers while also comparing their optical characteristics to a current treatment method (Bangerter foils). Holographic diffusers were developed by optically patterning thin polymer layers on a micron scale. Two compositions of photopolymer (acrylamide and diacetone acrylamide based) are analysed herein. Characterisation shows that holographic diffusers of either composition can achieve a wide range of on-axis intensity reductions, allowing for precise and customisable treatment levels by altering recording exposure time …

Analog Holographic Wavefront Sensor For Defocus And Spherical Aberration Measurement Recorded In A Photopolymer, Emma Branigan, Suzanne Martin, Matthew Sheehan, Kevin Murphy

Articles

An analog holographic wavefront sensor (AHWFS), for measurement of low and high order (defocus and spherical aberration) aberration modes has been developed as volume phase holograms in a photopolymer recording medium. This is the first time that high order aberrations such as spherical aberration can be sensed using a volume hologram in a photosensitive medium. Both defocus and spherical aberration were recorded in a multi-mode version of this AHWFS. Refractive elements were used to generate a maximum and minimum phase delay of each aberration which were multiplexed as a set of volume phase holograms in an acrylamide based-photopolymer layer. The …

Cavitation Erosion And Corrosion Resistance Of Hydrophobic Sol-Gel Coatings On Aluminium Alloy, Manasa Hegde, Joseph Mohan, Muhammad Qasim Mushtaq Warraich, Yvonne Kavanagh, Brendan Duffy, Edmond F. Tobin

Articles

Cavitation erosion and erosion-corrosion are the popular failure modes of hydronautics components namely propellers, valves, turbines etc which occurs due to mechanical destructions and electrochemical corrosion. Erosion corrosion is caused due to surge in the number of solid particles affecting the surfaces whereas cavitation erosion is caused due to steady collapse of cavities or bubbles. Aluminium alloys are widely used in marine renewable industries owing to its high strength, light weight and good corrosion resistance. Despite that, cavitation and erosion-corrosion are the limiting factors for these alloys. The aim of the present work is to produce a coating system capable …

Evaluation Of The Photon Contributions To The Solar Energy Conversion For Organic Luminescent Down-Shifting Liquid Beam Splitters In Hybrid Photovoltaic-Thermal (Pvt) Applications Using Raytracing Monte Carlo Simulations, Kenneth Coldrick

Articles

A hybrid photovoltaic-thermal (PVT) system combines photovoltaic (PV) and photo-thermal (PT) energy collection into a single structure, enhancing the potential to achieve greater solar energy conversion efficiencies. Such enhanced efficiencies can result in greater economic returns and could promote a larger uptake of PVT devices in cold and temperate climate countries. Through the utilization of a Monte Carlo ray-tracing model, this work provides new insights into the optical, electrical, and thermal characteristics of PVT devices. In particular, the work focuses on evaluating the behaviour of novel luminescent imidazole-phenanthroline-based working fluids that were previously experimentally investigated as liquid spectral beam splitters …

Feature Papers In Optical Sensors 2022, Vittorio M. N. Passaro, Yuliya Semenova, Benjamin Miller

Articles

Today, optical sensors are the subject of a very significant number of studies and applications. Many well-established technologies, including free-space optics, integrated photonics, and fiber optics approaches, have been developed in recent decades to fabricate and develop increasingly more efficient optical sensors for applications ranging from industrial control to monitoring the environment, biomedical use, and even as part of the Internet of Things.

Improving The Angular Visibility Of Photopolymer-Based Reflection Holograms For Sensing Applications, Tatsiana Mikulchyk, Kevin Murphy, John Walsh, Suzanne Martin, Dervil Cody, Izabela Naydenova

Articles

Volume reflection hologram-based sensors are designed to visibly change colour in response to a target stressor or analyte. However, reflection holograms fabricated in thick photopolymer films are highly angularly selective, making these sensors challenging to view and interpret by non-experts. Here, the use of speckle holography to improve the visibility of reflection holograms is presented. A novel recording approach combining speckle recording techniques with Denisyuk reflection recording geometry is described. The recorded speckle reflection grating operates as a series of multiplexed reflection gratings with a range of spatial frequencies, capable of reflecting light at a wider range of angles. A …

Diethoxycarbonyl-Bodipys As Heavy-Atom-Free Photosensitizers For Holographic Recording In Cellulose Acetate Photopolymer, Aimee Sheehan, Tatsiana Mikulchyk, Catherine S.P. De Castro, Safakath Karuthedath, Wejdan Althobaiti, Metodej Dvoracek, Sabad-E Gul, Hugh Byrne, FréDéRic Laquai, Izabela Naydenova, Mikhail Filatov

Articles

A series of new heavy-atom-free photosensitizers based on 2,6-diethoxycarbonyl-BODIPY scaffold was designed and applied for holographic recording in a photopolymerizable material. Photoinduced electron transfer between the BODIPY and meso-aryl subunits, followed by the formation of BODIPY triplet excited states via spin-orbit charge transfer intersystem crossing (SOCT-ISC) was studied by steady-state and ultrafast pump-probe transient optical spectroscopy. Highly efficient photosensitization was observed for dyads bearing pyrene and anthracene substituents, which exhibited singlet oxygen generation quantum yields () of up to 94%. Charge transfer and SOCT-ISC were observed in non-polar solvent (toluene) due to the increased electron accepting ability of the diethoxycarbonyl-BODIPY. …

Collective Relaxation Processes In Nonchiral Nematics, Neelam Yadav, Yuri Panarin, Wanhe Jiang, Georg H. Mehl, Jagdish Vij

Articles

Nematic–nematic transitions in a highly polar nematic compound are studied, in thick cells in which the molecules are aligned parallel to the substrates but perpendicular to the applied electric field, using dielectric spectroscopy in the frequency range 1 Hz to 10 MHz over a wide temperature range. The studied compound displays three nematic phases under cooling from the isotropic phase: ubiquitous nematic N; high polarizability NX; and ferroelectric nematic NF. Two collective processes were observed. The dielectric strength and relaxation frequency of one of the processes P2 showed a dependence on the thickness of the cell. The process P1 is …

The Lagrangian Formulation For Wave Motion With A Shear Current And Surface Tension, Conor Curtin, Rossen Ivanov

Articles

The Lagrangian formulation for the irrotational wave motion is straightforward and follows from a Lagrangian functional which is the difference between the kinetic and the potential energy of the system. In the case of fluid with constant vorticity, which arises for example when a shear current is present, the separation of the energy into kinetic and potential is not at all obvious and neither is the Lagrangian formulation of the problem. Nevertheless, we use the known Hamiltonian formulation of the problem in this case to obtain the Lagrangian density function, and utilising the Euler-Lagrange equations we proceed to derive some …

Color-Changing Reflection Hologram For Quality Assurance Of Therapeutic Ultrasound Systems, Tatsiana Mikulchyk, John Walsh, Jacinta Browne, Izabela Naydenova, Dervil Cody

Articles

The acoustic output of clinical therapeutic ultrasound equipment requires regular quality assurance (QA) testing to ensure the safety and efficacy of the treatment and that any potentially harmful deviations from the expected output power density are detected as soon as possible. A hologram, consisting of a reflection grating fabricated in an acrylate photopolymer film, has been developed to produce an immediate, visible, and permanent change in the color of the reconstructed hologram from red to green in response to incident ultrasound energy. The influence of the therapeutic ultrasound insonation parameters (exposure time, ultrasound power density, and proximity to the point …

Review-Electrode Kinetics And Electrolyte Stability In Vanadium Flow Batteries, Andrea Bourke, Daniela Oboroceanu, Nathan Quill, Catherine Lenihan, Maria Alhajji Safi Maria Alhajji Safi, Mallory A. Miller, Robert F. Savinell, Jesse S. Wainright, Varsha Sasikumarsp, Maria Rybalchenko, Pupak Amini, Niall Dalton, Robert P. Lynch, D. Noel Buckley

Articles

Two aspects of vanadium flow batteries are reviewed: electrochemical kinetics on carbon electrodes and positive electrolyte stability. There is poor agreement between reported values of kinetic parameters; however, most authors report that kinetic rates are faster for VIV/VV than for VII/VIII. Cycling the electrode potential increases the rates of both reactions initially due to roughening but when no further roughening is observed, the VII/VIII and VIV/VV reactions are affected oppositely by the pretreatment potential. Anodic pretreatment activates the electrode for the VII/VIII reaction, and deactivates it for VIV/VV. Three states of the carbon surface are suggested: reduced and oxidized states …

A Mode-Sum Prescription For The Renormalized Stress Energy Tensor On Black Hole Spacetimes, Peter Taylor, Cormac Breen, Adrian Ottewill

Articles

In this paper, we describe an extremely efficient method for computing the renormalized stress-energy tensor of a quantum scalar field in spherically symmetric black hole spacetimes. The method applies to a scalar field with arbitrary field parameters. We demonstrate the utility of the method by computing the renormalized stress-energy tensor for a scalar field in the Schwarzschild black hole spacetime, applying our results to discuss the null energy condition and the semiclassical backreaction.

Contributions Of Vibrational Spectroscopy To Virology: A Review, Iqra Chaudhary, Naomi Jackson, Denise Denning, Luke O'Neill, Hugh Byrne

Articles

Vibrational spectroscopic techniques, both infrared absorption and Raman scattering, are high precision, label free analytical techniques which have found applications in fields as diverse as analytical chemistry, pharmacology, forensics and archeometrics and, in recent times, have attracted increasing attention for biomedical applications. As analytical techniques, they have been applied to the characterisation of viruses as early as the 1970s, and, in the context of the coronavirus disease 2019 (COVID-19) pandemic, have been explored in response to the World Health Organisation as novel methodologies to aid in the global efforts to implement and improve rapid screening of viral infection. This review …

Combining Pharmacokinetics And Vibrational Spectroscopy: Mcr-Als Hard-And-Soft Modelling Of Drug Uptake In Vitro Using Tailored Kinetic Constraints, David Perez-Guaita, Guillermo Quintas, Zeineb Farhane, Roma Tauler, Hugh Byrne

Articles

Raman microspectroscopy is a label-free technique which is very suited for the investigation of pharmacokinetics of cellular uptake, mechanisms of interaction, and efficacies of drugs in vitro. However, the complexity of the spectra makes the identification of spectral patterns associated with the drug and subsequent cellular responses difficult. Indeed, multivariate methods that relate spectral features to the inoculation time do not normally take into account the kinetics involved, and important theoretical information which could assist in the elucidation of the relevant spectral signatures is excluded. Here, we propose the integration of kinetic equations in the modelling of drug uptake and …

Estimating The Analytical Performance Of Raman Spectroscopy For Quantification Of Active Ingredients In Human Stratum Corneum, Hichem Kichou, Emilie Munnier, Yuri Dancik, Kamilia Kemel, Hugh Byrne, Ali Tfayli, Dominique Bertrand, Martin Soucé, Igor Chourpa, Franck Bonnier

Articles

Confocal Raman microscopy (CRM) has become a versatile technique that can be applied routinely to monitor skin penetration of active molecules. In the present study, CRM coupled to multivariate analysis (namely PLSR—partial least squares regression) is used for the quantitative measurement of an active ingredient (AI) applied to isolated (ex vivo) human stratum corneum (SC), using systematically varied doses of resorcinol, as model compound, and the performance is quantified according to key figures of merit defined by regulatory bodies (ICH, FDA, and EMA). A methodology is thus demonstrated to establish the limit of detection (LOD), precision, accuracy, sensitivity (SEN), and …